Date post: | 09-Mar-2016 |
Category: |
Documents |
Upload: | james-moehring |
View: | 217 times |
Download: | 0 times |
About
Artwork
DigitalFabrication
Travel
Projects
Current Address:5000 25th Ave. NE.Apt. 7207DSeattle, WA. 98105Phone: (317)-416-7773
EDUCATION:Bachelor of Science, May 2010Major: ArchitectureBall State University Muncie, IndianaGPA: 3.76/4.0
Masters of Architecture, Expected Fall 2012with Architectural Lighting Design CertificateUniversity of Washington, Seattle
WORK EXPERIENCE:CSO Architects and InteriorsIntern, Summers 2008 & 2009• AutoCAD• Model Construction• Hand Drawn Perspectives
Leslie Coatings Inc.; Indianapolis INLeslie Coatings Worker, Summers, 2006 – 2007
SKILLS:• Adobe Suite (Photoshop, Indesign, Illustrator, Dreamweaver)• Rhino v.4.0• Grasshopper (Rhino Parametric Plug-in)• V-Ray (Rhino Rendering Plug-in)• AutoCAD• Autodesk Revit• SketchUp• Ecotect• Hand drawn renderings• Microsoft Office
HONORS: • LEED Accreditted Professional• Ball State University Presidential Scholarship• Indiana Architectural Foundation 2009 Scholarship• Dean’s List (all semesters)• ICMA (Indiana Concrete Masonry Association) Competition Finalist• Gresham Smith Design Competition 2009 Finalist & Competition Winner• CSI Award Nomination - IMA Pedestrian Bridge• Graduated with Cum Laude
ACTIVITIES:• Emerging Green Builders; Vice President 2009 Member 2007-2008• AIAS, member: 2007-2009• Freedom By Design, member: 2007-2009• Broad Ripple Kiwanis, volunteer• Habitat for Humanity, volunteer• White River Cleanup, 2008, 2009
WEBSITE: http://jrmoehring.iweb.bsu.edu/profile
James Moehring, LEED AP
MULTICULTURAL CENTERGresham Smith Design Competition Winner
A partner design competition introduced a new location and center for the growing multi cultural center at Ball State . The multicultural center focuses on creating a new entrance at the south side of campus and connecting campus life to the social life of “The Village”. Special attention was given to outdoor spaces and a welcoming site. Steel mesh is used as a daylight control device and as a posting board for social interaction between students. Local and renewable materials such as limestone and bamboo were used not just for sustainablilty efforts, but also to stimulate the senses of visitors. Creating a transparent and inviting building was key to welcome all students on campus. I contributed largely to the overall design/layout, wall section/screening detailing, selection of materials, creation of the digital model, rendering, and constructing the model.
STUDENTS:J. MOEHRINGK. GOFFINEY
DATE:MAY 2009
YEAR:3RD | JUNIOR
PROFESSOR:MICHELE CHIUINI
PROJECT:ACADEMIC
COOPER FARMBIOLOGY CENTERCreating a Lighter Footprint
A biology center that allows Ball State students to be able to study on site. Located in a succession area, the center responds and takes form based on the context. Many weeks were spent analyzing the topography, geography, drainage sun patterns, vegetation, and wildlife. The off-the-grid building includes rainwater collection, solar power, wind power, and a living machine.
STUDENT:J. MOEHRING
DATE:OCTOBER 2008
YEAR:3RD | JUNIOR
PROFESSOR:GEORGE ELVIN
PROJECT:ACADEMIC
Process
The biology center is raised above the ground to allow drainage, plants, and animals under the building without obstruction. The orientation of the building is made to maximize summer winds by cooling them over the wetlands to cross ventilate the shallow cross section of the building. The overhang of the roof blocks summer sun and lets in winter sun. The roof is covered in PV arrays and collects rain water that is then used again in the building or in the living machine. Three windmills are also provided in the open prairie when wind is available and/or sun is not.
PORTLAND COURTHOUSEAIAS / Kawneer National Competition
The new Portland Municipal Courthouse design explores ways of achieving similar effects of existing courthouses - monumentality and security - through the layering of lighter materials. This creates a more secure environment by allowing greater visibility to and from the courthouse. The more open scheme also creates a clear circulation. The south atrium allows visitors to orient themselves within the building to reach their destination. The green wall improves indoor air quality and serves as an interactive element to the building that motivates people to use the stairs instead of the elevators. The wooden skin is parametrically designed as a component to block and diffuse the sun based on altitude and azimuth angles. The component is then applied to the desired surface.
STUDENTS:J. MOEHRING
L. COMES
DATE:DECEMBER 2009
YEAR:4TH | SENIOR
PROFESSOR:JACK WYMAN
PROJECT:ACADEMIC
The layering of the building consists of the skin, the Kawneer curtain wall, the green wall / stairs. The inner most is the functional core. The sloped roof is a Kaweer power wall whch is a sloped glazing with PV cells. The roof collects solar energy and directs rain into rain barrels on the top floor. Signage and wayfinding in courthouses is key to making a successful and functional building so that visitors and security are both comfortable. Each floor is visible and indentified by the floor number and the function of the floor on the opposite side of the greenwall. The atrium also functions as a stack ventilation space.
Stack Ventilation
Rain Collection
Sun Shading
Structure
Nickel Plate Rail StationIndianapolis Transporation HUB
The “World Tour 4 Home Town Project” concentrates on the unity of the surrounding community and the joining of all types of transportations on the central site. Train, vehicular, public bus, bicycles, and walking pedestrians are the types of traffic merging together. The site is more than a hub for all the types of transportation. It is a place that people can go to enjoy the park, shop, and eat. By elevating the tracks, it allows for a fluid connection from the apartments and middle school in the east to the commercial intersection and neighborhoods in the west. The zigzag pedestrian bridge, first level paths, and second level walkway are the fluid connections that also allow people to explore and watch activities around the site. This stop would be a place for the community to take pride in, like other similar stops along the Nickel Plate Line.
STUDENT:J. MOEHRING
DATE:MAY 2010
YEAR:4TH | SENIOR
PROFESSOR:TED WOLNER
LES SMITH
PROJECT:ACADEMIC
Landmark Rail Vegetation Vehicular
Energy EngineeringCore
After design a master plan for a new UW urban campus, individual engineering buildings were designed acoording to the master plan goals. The Energy Engineering Building site sits on the popular Burke Gilman bike trail. In new and existing energy production system, there is a circular motion around central source or core where the energy is produced. Some examples of this concept are the circular motion around nuclear fusion chamber, the core of nuclear fission reactor, the section and plan of the Large Hadron Collider, and the rotation of a wind turbine and water turbine. The concept of the building is the idea of a central energy core similar to the listed examples. In the vertical core is a visual display of different types of energy; exposed electrical and mechanical systems, circulation of people, displays with information from each lab, daylight reflecting down from above, and the social competition and collaboration between the different disciplines of the lab.
STUDENT:J. MOEHRING
DATE:NOVEMBER 2010
YEAR:1ST | M.ARCH
PROFESSOR:ALEX ANDERSON
PROJECT:ACADEMIC
SOLARvs
HYDROvs
WINDvs
BIOFUELvs
FUEL CELLvs
NUCLEARvs
GEOTHERMAL
SOLAR+
HYDRO+
WIND+
BIOFUEL+
FUEL CELL+
NUCLEAR+
GEOTHERMALCORE
Core PV Array
Stack Ventilation Rain Water Collection
SOLARvs
HYDROvs
WINDvs
BIOFUELvs
FUEL CELLvs
NUCLEARvs
GEOTHERMAL
SOLAR+
HYDRO+
WIND+
BIOFUEL+
FUEL CELL+
NUCLEAR+
GEOTHERMALCORE
MINNETRISTA PUPPET THEATERDigital Fabrication
Minnentrista (a local museum and community center) required a new digitally fabricated puppet theater made entirely of recycled materials (recycled HDPE plastic). The group project design was influenced by Minnetrista’s main sculpture at their entrance and was parametrically modeled using Grasshopper. It is constructed in parts for easy transportation to out reach to schools. Acoustic analysis, light, whole openings and locations, proper heights to kneel, stand, and crawl were all addressed in the design process. My contributions to the project included acoustical analysis, connection details, form/shell and structure design, triangulation/separation of shell, and parametric modeling.
STUDENT:J. MOEHRING
+ GROUP
DATE:MAY 2009
YEAR:3RD | JUNIOR
PROFESSOR:MICHAEL GIBSON
PROJECT:ACADEMIC
Net-Zero EnergyMagnuson Park Classrooms
The net-zero energy classrooms are located on the coast of Lake Washington in Magnuson Park. Views of the lake and mountains with acces to the sourdings was a priority for site planning. The project was designed in detail for a potential design-build project by students of UW. Strategies to meet net-zero energy are 10” S.I.P. panels with minimal apertures, south facing openings for direct solar gain, gypcrete thermal mass, radiant floor heating, solar panels, and evacuated tubes. Water collection and drainage is used as a teaching tool and is important since it will be located next to a wetland. Calculations of thermal performance and amount of solar panels evacuated tubes were done and informed the final design of the 1,000 sqft classrooms.
STUDENT:J. MOEHRING
+ GROUP
DATE:January 2011
YEAR:1ST | M.ARCH
PROFESSOR:ROB PENA
PROJECT:ACADEMIC
HAND RENDERINGInk, Color Pencil, Marker
Hand rendering is a skill that I have had for quite a while. I excel mostly in pencil, ink, and colored pencil. I also have experiance in marker, watercolor, acrylic paint, charcoal, chalk pastel, and oil on canvas. Like most students I like to start with ink or pencil on trace. I believe here is where true ideas and life comes into my designs.
STUDENT:J. MOEHRING
DATE:2008-2011
PROJECT:ACADEMIC
+ PROFESSION
PROFESSIONINK, COLOR PENCIL, MARKER
DEPAUW REFLECTION CENTER
PROFESSIONINK, COLOR PECIL, MARKER
DEPAUW REFLECTION CENTER
ACADEMICINK, COLOR PENCIL, MARKER
DESIGN-BUILD PROJECT
ACADEMICCOLOR PENCIL, MARKER
STAIR
AROUNDTHE WORLD INDEPENDENT TRAVEL
ARCHITECTUREWORLD TOUR 2010
• Austria• Belgium • Cambodia• Canada• China• Czech Republic•• England• Egypt • Estonia•• France•• Germany• Greece•• Holland• Hungary• Ireland• Italy• Japan• Latvia• Lithuania• Luxemburg• Monaco• Poland• Russia•• Scotland• Singapore• Spain• Turkey• United Arab Emirates•• Wales
The world tour (WT4) is a full semester of study abroad among many different countries. A group of 40 Architecture, Landscape Architecture, Planning, and Historic Preservation students are accepted to embark on a tour of 26 countries in 96 days. Course work is woven inextricably into the intense day-by-day itinerary visiting places, spaces, design professionals, buildings, gardens, and vernacular environments - urban, rural, and natural. After the trip, a transportation HUB in my hometown (Indianapolis) was designed based on experiences and inspirations on the trip. Research prior to the trip on my hometown history added to my new views on architecture and its relative perspective verses my experiences around the world.
STUDENTS:J. MOEHRING
+ GROUP
DATE:JANUARY 2010
YEAR:4TH | SENIOR
PROFESSOR:LES SMITH
TED WOLNER
PROJECT:ACADEMIC