Quality Assurance Guide
1 / 12
ASSEMBLY INSTRUCTIONS
4 SHELF INDUSTRIAL RACKING
JBIR41410B
For spare parts or hardware call 1300 OFFICE
This design and instruction booklet is subject to copyright. www.officeworks.com.au 1 Carton
Furniture Assembly Instructions Style Guide
2 / 12
Estimated Assembly Time: 30 minutes Customer Service Contact Details
Spare Parts & Hardware 1300 OFFICE
People Required
General Advice
Furniture Assembly Instructions Style Guide
3 / 12
Tools Required
CAUTION: Do not use tools other than those required, as this
can damage your new item.
NOTE
• Please check you have all hardware before assembling.
• If you are missing any hardware, please contact the store of purchase.
• Please ensure you have the required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
• Do not tighten screws before all screws are in the right place.
• Do not use this product unless all screws are firmly secured.
• Check that all screws are securely tightened at least every 4 months.
WARNING
• If parts are missing, broken, damaged or worn, stop using the product until all repairs are made using manufacturer authorised parts.
• Failure to follow these warnings could result in serious injury.
DANGER
• CHILDREN MUST BE SUPERVISED.
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
Furniture Assembly Instructions Style Guide
4 / 12
Parts List
Included Hardware
Reinforce x8
1
2
3
Post x2 Beam x8
4
5
Shelf x4 Corner Protection x4
A
M6X12 Screw x 16
B C
M8X16 Screw x 16
D
M8 Nut x 16
E
Washer x 16
M6 Nut x 16
Furniture Assembly Instructions Style Guide
5 / 12
Assembly
E
Step 1
Step 2
x1
1
C
X4
D
X4 X4
2
X1
NOTE: Make sure all Screws(C), Nut(D), Washer(E) are locked.
D
E
C
2
Beam End Clip Tabs
1
Furniture Assembly Instructions Style Guide
6 / 12
Step 4 Step 3
Step 5
B
X4
A
X4 A
B
4
2
x1
3
X1
NOTE: Make sure all Screw(A), Nut(B) are locked.
2
Beam End Clip Tabs
1
Furniture Assembly Instructions Style Guide
7 / 12
E
Step 6
Step 7 Step 8
C
X4
D
X4 X4
A
B
B
X4
A
X4
4
3
X1
X1
NOTE: Make sure all Screws(C), Nut(D), Washer(E) are locked.
NOTE: Make sure all Screw(A), Nut(B) are locked.
D
E
C
Furniture Assembly Instructions Style Guide
8 / 12
E
Step 9
Step 10
2
C
X4
D
X4 X4
x1
X1
NOTE: Make sure all Screws(C), Nut(D), Washer(E) are locked.
D
E
C
2
Beam End Clip Tabs
1
Furniture Assembly Instructions Style Guide
9 / 12
Step 11
Step 13
A B
3
B
X4
A
X4
Step 12
4
2
x1
X1
NOTE: Make sure all Screw(A), Nut(B) are locked.
2
Beam End Clip Tabs
1
Furniture Assembly Instructions Style Guide
10 / 12
E
Step 14
Step 15
C
X4
D
X4 X4
B
X4
A
X4
A
B
3
X1
X1
NOTE: Make sure all Screw(C), Nut(D), Washer(E) are locked.
NOTE: Make sure all Screw(A), Nut(B) are locked.
D
E
C
Furniture Assembly Instructions Style Guide
12 / 12
MAXIMUM WEIGHT CAPACITY
• The shelving is designed to carry up to 1000kg per layer.
• DANGER – To prevent furniture from toppling, attach, mount, bolt or otherwise secure to walls and floors. Do not put heavy items on top shelves. Do not place unstable furniture near where children play.
• WARNING – In an environment where infants and children are present, this product should be anchored to a wall or other suitable surface to avoid serious injury.
• Suitable anchor kits are available at your nearest hardware store.
• Place equipment evenly and ensure it does not overlap.
• The product is intended to hold the maximum weight indicated.
• Exceeding the maximum weight will result in instability and may cause injury.
CAUTION
CAUTION
Note: 1000kg per shelf
Thank you for your purchase. Please retain your receipt to validate warranty. If you would like to know more about our furniture products, please visit www.officeworks.com.au