MiTek Mark 1 Press
Timber Engineering Machinery
Shaping the future
30 tonne hydraulic press with 700 x 500 mm platen•
Control panel with touch screen monitor•
Pressing area dependant on number of tables•
Optical and mechanical high-speed emergency stops•
Pneumatic ejectors with individual stop valves•
Steel tables 4.2 – 4.8 x 1.93m with Halfen rails•
Fully compatible with MiTek software•
Independent truss ejector zones•
Trackless Mono Press System
TABLE PRESS
MARK 1 PRESS.indd 1 18/1/11 12:20:30
Contact:Mr Roy Troman - Sales & Marketing DirectorMr Peter
Bullock - Special Products Manager
Website: www.mitek.co.uk Shaping the future
DescriptionRugged, versatile and dependable, the Mark I press
satisfi es the needs of all truss fabricators. The fast effi cient
single 30 tonne press head combines the strength of the Mark VII
with the versatility of the Mark 8 press. It combines the best
mechanical features with the latest in fabricating technology, to
provide you with a state of the art press for the 21st Century.
Standard FeaturesOne or two parking zones•
Wi-Fi network connection•
Pucks and jig kit accessories•
Traversing ejectors Bridges for ejector gaps•
Physical DataOverall table width: Max 4.8mOverall length: Varies
with table numbers See illustrated layout
Typical Plant Layout
MiTek Mark 1 Press
Timber Engineering Machinery
Trackless Mono Press System
TABLE PRESS
MiTek Industries LtdGrazebrook Ind Est, Peartree LaneDudley,
West Midlands DY2 0XW
Tel (+44) 1384 451400Fax (+44) 1384 451411
Contact:
Typical Plant Layout
MiTek Industries LtdMiTek Industries LtdMiTek Industries Ltd
MARK 1 PRESS.indd 2 18/1/11 12:20:40
