PH: 847-678-5150 . FAX: 847-678-6817 . E-MAIL: [email protected] . www.justmfg.com9233 KING STREET . FRANKLIN PARK . ILLINOIS . 60131-2111JUST MANUFACTURING COMPANY
JUST MFG. COMPANY CONTINUES TO MAKE QUALITY AND FUNCTIONALITY A MARK OF THE JUST PRODUCT LINE. WE RESERVE THE RIGHT TO CHANGE PRODUCT INFORMATION WITHOUT NOTICE. DIMENSIONS MAY CHANGE AND MAY BE SUBJECT TO CHANGE WITHOUT NOTICE. NO RESPONSIBILITY IS ASSUMED FOR USE OF SUPERCEDED OR VOIDED DATA. JUST MFG. CO. SINKS ARE MADE IN THE U.S.A. WHEN COMPARING OTHER BRAND PRODUCTS, BE SURE TO COMPARE USA QUALITY ALONG WITH FEATURES AND DIMENSIONS.
SPECIFICATION • ADA Compliant - Wall-Hung.• Seamless welded construction of 16 gauge, type 304 stainless
steel.• Enclosure of 18 gauge, type 304 stainless steel.• Interior and exposed exterior to have a satin blended No. 4
• Underside of sink to be sound deadening to insulate for sound and reduce condensation.
• Tapered front bowl wall provides greater ADA Compliant access.• Support brackets of 14 ga. type 304 included. Wall clips included.• JSL-46 Sensor faucet (AC or Battery)• Thermostatic mixing valve.• Emergency eyewash, swing down to operational position activat-
ing water Each head with top" dust cover, internal control. ANSI-compliant sign included. Tested and comply with ANSI Z358.1-2014
• In-line on eyewash and sensor faucets.• Separate thermostatic mixing valves for eyewash and faucet.• Eyewash mixing valve High Temp Limit set at 900F (320C). Outlet
dial thermometer color coded to view temperature. Internal cold water bypass on failure of hot water supply. Min. hot and cold supply 30 psi; max supply pressure 125 PSI. 2.0-9.0 GPM. 1/2" inlets with check and stop valves. Polished chrome plated brass construction with housing cover of type 316 stainless steel. ASSE 1071-2012 tested. Pre-piped enclosure connections to be completed at jobsite.
• Just J-35-SSF stainless steel grid drain, pre-installed.
SU
BM
ITTA
L D
ATA
PH: 847-678-5150 . FAX: 847-678-6817 . E-MAIL: [email protected] . www.justmfg.com9233 KING STREET . FRANKLIN PARK . ILLINOIS . 60131-2111JUST MANUFACTURING COMPANY
PHARMACY SERIESFITTINGS PACKAGE
JPHADA2224CT
JSL-46-ACSensor-operated backsplash mount gooseneck faucet Lead-Free, chrome plated solid brass construction. Chrome plated spout 11-7/8” from base to aerator with 8-3/8” reach. 2.0 GPM laminar control. Manual override on base.
AC powered vandal resistant with armored control/power cable. Power adapter, standard plug-in type provides 12V DC output. Slow closing solenoid valve, piston-operated, provides reliable smooth operation without water hammer. In-line
with clean-out trap. Sensor self-adapting. Automatic 30-second ime out feature.
Battery powered unit available. same as above except pro-vides 6V DC and includes battery holder for four AA batteries (included) in lieu of plug-in power adapter. Low lead to NSF 372.
JTM-47 - Thermostatic Mixing Valve Anti-Scald mixing valve with bronze body, integral check valves and adjustment cap with locking feature. 1/2” sweat union inlet and outlet connections. Temperature range from 60° to 120° (16° C to 49°C) ASSE Standard 1016 listed, 1070 listed. Low lead to NSF 372.
JT-150 P-TrapChrome plated cast brass 1-1/2" P-trap with cleanout. Drain pipe of 17 ga. chrome plated brass.
JG1800 EyewashBacksplash mounted “AutoFlow” swivel eye washwith ½” IPS plug-type valve with T coated O-ring seals and stainless steel enclosure. Supplied with in-line strainer to prevent debris from affecting the valve. Unit shall have (2)polypropylene spray heads with integral dust covers, and 1.6-GPM control mounted on a chrome plated brass eyewash assembly (Specify spray head Activate valve by rotating 90° from stored position. Unit shall include ANSI compliant sign. Unit shall be fully factory assembled and hydro-statically tested to meet or exceed ANSI Z358.1 – 2009, and come with a full 2-year warranty.
JMXE-300 Eyewash Mixing ValveEmergency eye/face wash mixing valve to control and maintainwater temperature at eyewash. Self-contained and includesthermostatic water mixing valve, dial thermometer on the outlet,angle stops, wall mounting bracket. Unit set for 85ºF(29ºC) and a maximum temperature of 90ºF(32ºC). After setting correct temper ature, must be locked to prevent accidental changing of temperature.
NOTE: responsible to determine the delivered watertemperature to the safety Comfortable range consideredto be between 60ºF to 90ºF (15ºC to 32ºC).
IMPORTANT: According to ANSI/ISEA Z358.1-2014, emergency equipment must be used and maintained regularly. Thermostatic mixing valves should also be cycled and maintained on a regular basis. At installation, the mixing valve's temperature settings may have to be adjusted based on the incoming hot water supply temperature.
![ResearchArticle ...downloads.hindawi.com/journals/jph/2013/680580.pdf · 2 JournalofPharmaceutics self-assemblageintovesiclesinapH-dependentmanner [14].Fattyacidsbeinghighlysolubletendtopartition](https://static.documents.pub/doc/80x56/60435fd2f3f4f97c0574e294/researcharticle-2-journalofpharmaceutics-self-assemblageintovesiclesinaph-dependentmanner.jpg)
