Juan Pablo Hernandez-Ortiz, Ph.D.

Full ProfessorDepartment of Materials and MineralsCalle 75 # 79A-51 Tel: +57 4 425-5249Bloque M17 Fax: +57 4 425-5254Facultad de Minas E-mail: jphernandezo@unal.edu.coUniversidad Nacional de Colombia E-mail: jphernandezo@wisc.eduSede Medellın E-mail: jphernandezo@rcc.uchicago.eduMedellın, Colombia http://www.unalmed.edu.co/∼jphernandezo

Date of Birth: March 15, 1977

PROFESSIONAL

2013−present Full Professor, Department of Materials and Minerals,Universidad Nacional de Colombia, Sede Medellın, Colombia(Youngest person to reach the Full Professor level at the University)

2008−2013 Associate Professor, Department of Materials and Bioengineering,Universidad Nacional de Colombia, Sede Medellın, Colombia

2010−2011 Visiting Scientist, Department of Chemistry-Genetics,and Department of Chemical and Biological Engineering,University of Wisconsin-Madison, United States

2007−2008 Assistant Professor, Department of Materials and Bioengineering,Universidad Nacional de Colombia, Sede Medellın, Colombia

1998−2000 Assistant Researcher, Energy and Thermodynamic Institute,Universidad Pontificia Bolivariana, Medellın, Colombia

EDUCATION

2004−2007 Postdoctoral Chemical and Biological EngineeringUniversity of Wisconsin-Madison, United StatesAdvisors: Professors J. J. de Pablo and M. D. Graham

2000−2004 Ph.D. Mechanical Engineering, minor in Chemical EngineeringUniversity of Wisconsin-Madison, United StatesAdvisor: Professor T. A. Osswald

1994−1998 B.S. Mechanical Engineering,Universidad Pontificia Bolivariana (UPB), Medellın, Colombia

LANGUAGES

− Fluent: Spanish and English

− Conversational: Portuguese and German

Juan P. Hernandez-Ortiz, Ph.D. 2/14

PROFESSIONAL SERVICES

2013 Accreditation Reviewer Coordinator, Department of Mechanical Engineering,Fundacion Universitaria los Libertadores, Bogota, Colombia

2013−present Editorial Board, Advances in Computational ChemistryHindawi Publishing Corporation, New York

2011−present Editorial Advisory Board, Journal of Polymer EngineeringVerlag Walter de Gruyter, Germany

2009−present Associate Editor, DYNA-Colombia, Facultad de Minas,Universidad Nacional de Colombia, Medellın, Colombia

2008−present Editorial Board, Journal of Plastics Technology, WAK,Carl-Hanser Verlag, Germany

2011−2012 Academic Chair, Department of Materials and Bioengineering,Universidad Nacional de Colombia, Medellın, Colombia

2012 Accreditation Reviewer, Department of Mechanical Engineering,Universidad del Valle, Cali, Colombia

2007−2012 External Advisory Committee, Nanoscale Science and EngineeringCenter (NSEC), University of Wisconsin-Madison, United States

2008−2010 Director, Material Characterization Laboratory,Universidad Nacional de Colombia, Medellın, Colombia

AWARDS and HONORS

2013 Honorary Associate Fellow, Biotechnology Center, Genomics Center of WisconsinUniversity of Wisconsin-Madison, United States

2012 Superior Performance, Department of Materials and Bioengineering,Universidad Nacional de Colombia, Medellın, Colombia

2012 2012 Distinction of Research and Teaching, Facultad de Minas,Universidad Nacional de Colombia

2009−2013 Honorary Associate Fellow, Department of Chemical and Biological Engineering,University of Wisconsin-Madison, United States

2010 Superior Performance, Department of Materials and Bioengineering,Universidad Nacional de Colombia, Medellın, Colombia

2005 ENSINGER-Preis, Wissenschaftlichen Arbeitskreises Kunststofftechnik, Germany(Best Ph.D. Thesis in the field of Polymer Engineering of centers associated withthe Polymer Technology Alliance (WAK))

2005 QUADRANT Award, Quadrandt AG, Switzerland(2nd Best Polymer and Composites Ph.D. Thesis in the world)

2005 PLACON Award, Rheology Research Center,University of Wisconsin-Madison, United States(Best student talk for the year)

2002 Doktorand, Forschung und Technologie. Fertigungstechnik, Daimler AG, Germany(Daimler Ph.D. Student Fellowship)

1999 Excellence Research Group Ranking, Energy and Thermodynamic Institute,UPB, COLCIENCIAS, Colombia

1999 Bolivarian Talent at the Scientific Area, UPB, Medellın, Colombia1998 Research Project of the Year, Ciencia y Tecnologıa, Antioquia, Colombia1996 Excellence Research Group Ranking, Energy and Thermodynamic Institute,

UPB, COLCIENCIAS, Colombia

Juan P. Hernandez-Ortiz, Ph.D. 3/14

RESEARCH

My research group currently has 15 graduate students and more than 12 undergraduates. The projectsare mainly funded by COLCIENCIAS in three different modes: Co-funded with private institutions,non-co-funded and through the Ph.D. program. There are several students that are funded by theUniversidad Nacional de Colombia Research Fund and the Faculty of Mines Ph.D. and M.Sc. tuitiongrant.

Projects that are in collaboration with the University of Wisconsin-Madison and the University ofChicago are funded by the National Science Foundation (NSF), the National Institute of Health(NIH), the Department of Energy (DOE) and the Keck Foundation. These collaborations in theUSA support co-advised students and postdocts in Juan de Pablo and Dave Schwartz’ groups. Theyprimarily provide funding for travel expenses, conferences and monthly expenses when colombianstudents visit US.

Research Projects1. Project: Modelacion del desgaste erosivo de alta temperatura en revestimientos de barrera

termica (TBC) para maquinas termicas de carga variable. FASE II: Aplicacion de plasma,diseno de polvos y mecanismos de erosion(Modeling high temperature erosion of thermal barrier coatings for thermal devices in non-constant operation conditions. FASE II: Air Plasma application, powder design and erosivemechanism).Funded by: Empresas Publicas de Medellın (EPM): $1,000,000 for 3 years.Involvement: co-PI with Professor Alejandro Toro.Students: 1 Ph.D. student, 2 Master students and 5 undergraduate students.Years: 2013 to 2016.

2. Project: New Physical Methodologies for Genomic AnalysisFunded by: The National Institute of Health (US): $1,500,000 for 3 yearsFunded by: Universidad Nacional de Colombia: $20,000Involvement: co-PI in collaboration with Professor David C. Schwartz (UW-Madison).Students: 1 Ph.D. student and 1 Master student in Colombia.Years: 2012 to 2015.

3. Project: The Genome AssemblerFunded by: The Keck Foundation (US): $1,000,000Funded by: Universidad Nacional de Colombia: $20,000Involvement: co-PI in collaboration with Professor David C. Schwartz (UW-Madison).Students: 1 Master student in Colombia.Years: 2012 to 2015.

4. Project: Hierarchical driven-assembly of nano-confined nematicsFunded by: Universidad Nacional de Colombia Ph.D. grant and Faculty of Mines M.Sc.tuition grant: $150,000 for 4 yearsInvolvement: PI (Colombia) and co-PI (US).Students: 1 Ph.D. student and 1 Master student in Colombia.Years: 2012 to 2016.Comments: This project is part of a collaboration with Professor Juan de Pablo in theInstitute for Molecular Engineering at the University of Chicago. The US funding comes fromNSF and DOE.

Juan P. Hernandez-Ortiz, Ph.D. 4/14

5. Project: Design and fabrication of light-weight composites through direct molding for ballisticapplicationsFunded by: Colciencias - National Ph.D. program: $100,000 for 4 years.Involvement: PI.Students: 1 Ph.D. student and 3 undergraduate students.Years: 2012 to 2016.Comments: This project is being presented for additional funding of $750,000 for 4 yearsto Colciencias, Colombian companies and the Colombian Army. In addition, it embraces theconcepts of Soldier Comfort R© and Light Soldier R©.

6. Project: Collective motion, chemotaxis and signaling in colonies of self-propelled organismsFunded by: Colciencias - National Ph.D. program: $100,000 for 4 years.Funded by: Universidad Nacional de Colombia, Sede Medellın: $20,000.Involvement: PI.Students: 1 Ph.D. student and 1 undergraduate student.Years: 2010 to 2014.Comments: This project is being presented for additional funding of $500,000 for 4 years toColombian mining companies to extend the study to bio-leaching mechanisms of bacteriafor gold recovery in mining tails.

7. Project: Modelacion y Simulacion del proceso de espumado en termofijos y elastomeros(Modeling and Simulation of thermosetting and elastomeric foaming processes)Funded by: Colciencias - Extrusiones S.A.: $300,000 for 3 years.Involvement: PI.Students: 1 Ph.D. student and 2 undergraduate students.Years: 2009 to 2012.

8. Project: Mechanism of proton transfer in polymeric membranes and catalytic surface reactionsFunded by: Colciencias - National Ph.D. program: $200,000 for 4 years.Involvement: PI.Students: 2 Ph.D. students.Years: 2007 to 2011.

9. Project: Modelacion del desgaste erosivo de alta temperatura en revestimientos de barreratermica (TBC) para maquinas termicas de carga variable(Modeling high temperature erosion of thermal barrier coatings for thermal devices in non-constant operation conditions).Funded by: Colciencias - Empresas Publicas de Medellın (EPM): $850,000 for 3 years.Involvement: co-PI with Professor Alejandro Toro.Students: 1 Master student and 3 undergraduate students.Years: 2008 to 2011.

10. Project: Metodo para la simulacion de macro-iones suspendidos en un solvente ionico con-tinuo: Nernst-Planck-GGEM(Method to simulate suspended macro-ions in an ionic continumm solvent).Funded by: The Research Division, Universidad Nacional de Colombia, Sede Medellın: $15,000.Involvement: PI, new faculty start-up project (computational resources)Year: 2008.

Juan P. Hernandez-Ortiz, Ph.D. 5/14

11. Project: Desarrollo mediante la tecnica UV-LIGA de un Micro-actuador ETM con potencialaplicacion en sistemas de conmutacion optica.(Design and fabrication of ETM micro-actuator for optical commutation by UV-LIGA).Funded by: The Research Division, Universidad Nacional de Colombia, Sede Medellın: $10,000.Involvement: PI.Students: 2 undergraduate graduation projects.Year: 2009.

12. Project: Fabricacion de micro-piezas por UV-Liga(Fabrication of micro-devices by UV-LIGA).Funded by: The Research Division, Universidad Nacional de Colombia, Sede Medellın: $10,000.Involvement: PI.Students: 2 undergraduate graduation projects.Year: 2008.

Submitted proposals for additional funding and non-funded projects1. Project: Design and fabrication of light-weight composites through direct molding for ballistic

applications.In preparation to: Colciencias co-funded by ThoR S.A. and TermalTec S.A.: $ 750,000Supported by: The Colombian Army, Navy and the Secretary of Defense.Current students: 1 Ph.D. student and 3 undergraduate graduation projects.Year: 2013-14

2. Project: Bio-leaching mechanisms of bacteria for gold recovery in mining tails.In preparation to: Colciencias co-funded by Mineros de Antioquia: $ 500,000Current students: 1 Ph.D. student and 1 undergraduate graduation project.Year: 2013-14

3. Project: Modeling the immune response in organ and islet transplantation.In preparation to: Ruta N - Regalias Antioquia: $ 500,000Collaboration: M.D. Luis Fernandez, Department of Surgery at the University of Wisconsin-Madison.Current students: 2 undergraduate graduation project.Year: 2013-14

4. Project: 4D flow from MRI: predicting rheological and mechanical properties in patients withpulmonary hypertension.In preparation to: CediMed - Ruta N - Regalias Antioquia: $ 500,000Collaboration: M.D. Ph.D. Christopher J. Francois, Department of Radiology at the Univer-sity of Wisconsin-Madison.Current students: 2 undergraduate graduation project.Year: 2013-14

5. Project: Multiple Myeloma characterization by means of genome analysis: NanoGenomics.In preparation to: Ruta N - Regalias Antioquia: $ 1,000,000Collaboration: Professor Dave Schwartz, Department of Chemistry, University of Wisconsin-Madison.Year: 2013-14

6. Project: Rheology of polymeric films through pattern leveling.In preparation to: Colciencias and the National Science Foundation (US): $ 250,000Possible collaboration: Professor Paul Nealey, Institute for Molecular Engineering at theUniversity of Chicago.Current students: 3 undergraduate graduation projects.Year: 2013-14

Juan P. Hernandez-Ortiz, Ph.D. 6/14

Figure 1: Research Group December 2012.

GRADUATE STUDENTS

Name Degree Graduation Comments1. Julian D. Osorio R. M.Sc. Material Science Feb-2012 Laureate Thesis

Propiedades de Transporte en Recubrimientos Ceramicos Utilizados enTurbinas a Gas. (Transport Properties in Thermal Barrier Coatings usedin Gas Turbines.)

2. Ana M. Gomez-Marın Ph.D Chemical Engineering Dec-2013 Laureate ThesisStructure and Charge Transfer Processes at the Pt(111)/Solid PolymerElectrolyte Interface: A Mesoscopic Approach.

Jarol E. Molina Ph.D. Chemical Engineering 2013 finishingNora Catalina Restrepo Ph.D. Material Science 2013 finishingAlejandro Vasquez M.Sc. Mathematics 2013 in processLiliam Cristina Agudelo Ph.D. Material Science 2014 in processAnderson Valencia M.Sc. Material Science 2014 in processViviana Palacio Betancur M.Sc. Material Science 2014 in processOrlando Barrios M.Sc. Material Science 2014 in processFabio A. Suarez Ph.D. Material Science 2015-16 in processStiven Villada Ph.D. Material Science 2015-16 in processJuan Fernando Montoya Ph.D. Material Science 2015-16 in processJuan David Ospina Correa Ph.D. Material Science 2017-18 startingSusana Calle M.Sc. Material Science 2016 startingDaniel Alejandro Olaya M.Sc. Material Science 2017 starting (Jan 2014)Paula Andrea Piedradita M.Sc. Material Science 2017 starting (Jan 2014)Diego Alerto Patino Ph.D. System Engineering 2019 starting (Jan 2014)

Juan P. Hernandez-Ortiz, Ph.D. 7/14

RESEARCH INTERESTS

− Computational Immunology: Epitopes to organ transplantation− Physiology of body fluids: Blood and Lymph− Non-equilibrium thermodynamics in biology and complex fluids− Nanoscale engineering for biotechnological applications− Driven-assembly and material design with complex fluids− Self-repairing and advanced ballistic materials

− Biophysics, Biology and Physiology− Statistical thermodynamics and transport phenomena− Polymer and non-condensed matter physics− Non-linear mathematics and stochastic calculus− Numerical methods, modeling and simulation

COURSES

− Courses at the Universidad Nacional de Colombia:

Title Type Average Average StudentStudents Evaluation

Material Science Undergraduate 60 Students 4.6/5.0Statistical Thermodynamics Graduate 15 Students 4.75/5.0Inter. Transport Phenomena Graduate 15 Students 4.5/5.0

− New Courses and courses in preparation:

Title TypePhysics of Complex Fluids 2014 GraduateAdvanced Mathematics for Engineers 2014 GraduateComputational Immunology 2015 Graduate

PUBLISHED PUBLICATIONS

Web of ScienceSM (December 2013)Times cited: 474Citing articles: 352Average Citations per Item: 13.94h-index: 11

1. Modelling and simulation of transient wood combustion processes, Renew. Energy, vol.15-16, pp 1992 (1998), with F. Chejne and W. F. Florez (2nd author)

2. Modeling and simulation of time-dependent coal combustion processes in stacks, FUEL, vol.79, pp. 987 (2000), with F. Chejne, W. Florez and A. F. Hill (1st author) [DOI: 10.1016/S0016-2361(99)00224-0]

3. Modeling and simulation of coal gasification process in fluidized bed, FUEL, vol. 81, pp. 1687(2002), with F. Chejne (co-author) [DOI: 10.1016/S0016-2361(02)00036-4]

4. Analysis of fiber damage mechanisms during processing of reinforced polymer melts, Eng.Anal. Boundary Elements, vol. 26, pp. 621 (2002), with T. Raush, A. Rios, S. Strauss andT. A. Osswald (1st author) [DOI: 10.1016/S0955-7997(02)00018-8]

Juan P. Hernandez-Ortiz, Ph.D. 8/14

5. Theoretical model for heat transfer in the single crystal making, Revista Facultad de In-genierıa - U. de A., vol. 26, pp. 79 (2003), with F. Chejne, W. Florez, and T. Ragimova(director author)

6. Simulation of viscous 2D-planar cylindrical geometry deformation using DR-BEM, Int. J.Num. Meth. Heat Fluid Flow, vol. 13, pp. 698 (2003), with T. A. Osswald and D. A. Weiss(1st author) [DOI: 10.1108/09615530310498385]

7. Theoretical analysis of fiber motion and loads during flow, Polym. Composites, vol. 25,pp. 1 (2004), with T. Raush, A. Rios, S. Strauss and T. A. Osswald (1st author) [DOI:10.1002/pc.20000]

8. A novel cure reaction model fitting technique based on DSC scans, J. Poly. Eng., vol. 25, pp.23 (2004), with T. A. Osswald (1st author)

9. Transport and collective dynamics in suspensions of confined swimming particles, Phys. Rev.Lett., vol. 95, pp. 204501 (2005), with C. Stoltz and M. D. Graham (1st author) [DOI:10.1103/PhysRevLett.95.204501]

10. N logN Fourier based method for hydrodynamic interactions in confined polymer solutions,J. Chem. Phys., vol. 125, pp. 164906 (2006), with J. J. de Pablo and M. D. Graham (1stauthor) [DOI: 10.1063/1.2358344 ]

11. Cross-stream-line migration in confined flowing polymer solutions: Theory and simulation,Phys. Fluids, vol. 18, pp. 123101 (2006), with H. Ma, J. J. de Pablo and M. D. Graham (1stauthor) [DOI: 10.1063/1.2397571]

12. Modeling the vulcanization of silicone rubber, Polym. Eng. Sci., vol. 47, pp. 675 (2007), withL. M. Lopez, A. B. Cosgrove and T. A. Osswald (co-director author) [DOI: 10.1002/pen.20698]

13. Mechanism of fiber-matrix separation in ribbed compression molded parts, Polym. Compos-ites, vol. 28, pp. 451 (2007), with A. Londono-Hurtado and T. A. Osswald (2nd author) [DOI:10.1002/pc.20295]

14. Fast computation of many-particle hydrodynamic and electrostatic interactions in a confinedgeometry, Phys. Rev. Lett., vol. 98, pp. 140602 (2007), with J. J. de Pablo and M.D.Graham (1st author) [DOI: 10.1103/PhysRevLett.98.140602]

15. Diffusion and spatial correlations in suspensions of swimming particles, Phys. Rev. Lett., vol.100, pp. 248101 (2008), with P. Underhill and M.D. Graham (2nd author) [DOI: 10.1103/Phys-RevLett.100.248101]

16. Diffusion and spatial correlations in suspensions of swimming particles, Virtual J. BiologicalPhysics Research, vol. 16(1), July 1st (2008), with P. Underhill and M.D. Graham (2ndauthor)

17. Dipole-induced self-assembly of helical β-peptides, J. Chem. Phys., vol. 129, pp. 015102(2008), with C. A. Miller, N. L. Abbott, S. H. Gellman and J. J. de Pablo (2nd author) [DOI:10.1063/1.2928700]

18. Dipole-induced self-assembly of helical β-peptides, Virtual J. Biological Physics Research,vol. 16(2), July 15th (2008), with C. A. Miller, N. L. Abbott, S. H. Gellman and J. J. de Pablo(2nd author)

19. Concentration distributions during flow of confined flowing polymer solutions at finite concen-tration: slit and grooved channel, Korea-Australia Rheology Journal, vol. 20, pp. 143(2008), with H. Ma, J. J. de Pablo and M. D. Graham (1st author)

20. Liquid crystal relaxation in three dimensions: The effect of hydrodynamic interactions,DYNA-Colombia, vol. 75, pp. 185 (2008), with B. T. Gettelfinger, F. R. Hung, O. Guzman, A. D. Rey,N. L. Abbott and J. J. de Pablo (co-director author)

Juan P. Hernandez-Ortiz, Ph.D. 9/14

21. Dynamics of confined suspensions of swimming particles, J. Phys. Condensed Matter, vol.21, pp. 204107 (2009), with P. Underhill and M. D. Graham (1st author) [DOI: 10.1088/0953-8984/21/20/204107]

22. Hydrodynamic effects on the translocation rate of a polymer through a pore, J. Chem. Phys.,vol. 131, pp. 044904 (2009), with M. Chopra, S. Geier and J. J. de Pablo (1st author) [DOI:10.1063/1.3184798]

23. Flow induced deformation of defects around nanoparticles and nanodroplets suspended in liquidcrystals, Soft-Matter, vol. 6(5), pp. 896 (2010), with B. T. Gettelfinger, J. A. Moreno-Razo,G. M. Koenig Jr., N. L. Abbott and J. J. de Pablo (co-director author) [DOI: 10.1039/b912551e]

24. Pair collisions of fluid-filled elastic capsules in shear flow: effects of membrane properties andpolymer additives, Phys. Fluids, vol. 22, pp. 123103 (2010), with P. Pranay, S. G. Anekaland M. D. Graham (co-director author) [DOI: 10.1063/1.3524531]

25. Pair collisions of fluid-filled elastic capsules in shear flow: effects of membrane properties andpolymer additives,Virtual J. Biological Physics Research, vol. 20(12) December 15 (2010),with P. Pranay, S. G. Anekal and M. D. Graham (co-director author)

26. Nanoscale science: a path for understanding nature, DYNA-Colombia, Editorial, vol. 163(2011)

27. Modeling processing of silicone rubber: liquid versus hard silicone rubber, J. Applied Polym.Sci., vol. 119, pp. 1864 (2011), with T. A. Osswald (co-author) [DOI: 10.1002/app.31995]

28. Numerical prediction of fiber orientation in fiber-reinforced composites, J. Reinforced Plast.Comp. vol. 30(9), pp. 781 (2011), with A. Londono-Hurtado and T. A. Osswald (co-directorauthor) [DOI: 10.1177/0731684411400227]

29. Modeling flows of confined nematic liquid crystals, J. Chem. Phys., vol. 134, pp. 134905(2011), with B. T. Gettelfinger, J. Moreno-Razo and J. J. de Pablo (1st author) [DOI: 10.1063/1.3567098]

30. Numerische Bestimmung der Durchgangsrate von Partikeln durch eine Porengeometrie,ChemieIngenieur Technik, vol. 83(6), pp. 900 (2011), with S. Geier and J. J. de Pablo (co-directorauthor) [DOI: 10.1002/cite.201000218]

31. Liquid crystal nanodroplets, and the balance between bulk and interfacial interactions, SoftMatter, vol. 8(5), pp. 1443-1450 (2012), with S.I. Hernandez, J. A. Moreno-Razo, A. Ramırez-Hernandez, E. Dıaz-Herrera and J. J. de Pablo (co-director author) [DOI: 10.1039/c1sm06425h]

32. Liquid crystal mediated interactions between nanoparticles in a nematic phase, Langmuir, vol.28(14), pp. 6124-6131 (2012), with V. Tomar, T. F. Roberts and J. J. de Pablo (co-directorauthor) [DOI: 10.1021/la204119p]

33. Liquid Crystal Mediated Self Assembly at Nanodroplet Interfaces, Nature, vol. 485(7396),pp. 86-89 (2012), with J. A. Moreno-Razo, E. J. Sambriski, N. L. Abbott and J. J. de Pablo(co-director author) [DOI: 10.1038/nature11084]

34. Morphological Transitions in Liquid Crystal Nanodroplets, Soft Matter, vol. 8(33), pp. 8679-8689 (2012), with V. Tomar, S. I. Hernandez and J. J. de Pablo (co-director author) [DOI:10.1039/ c2sm25383f]

35. Cinetica de curado de un caucho EPDM y una resina epoxica alifatica −modelamiento y analisissin y con difusion, Revista Iberoamericana de Polımeros, vol. 13(5), pp. 245 (2012), withN.C. Restrepo and T.A. Osswald (senior author)

36. A Novel Approach Towards Electrokinetic Phenomena in Soft Matter, DYNA-Colombia, vol.79(175E), pp. 105-113 (2012)

Juan P. Hernandez-Ortiz, Ph.D. 10/14

37. Thermal barrier coatings for gas turbine applications: failure mechanisms and key microstruc-tural features, DYNA-Colombia, vol. 79(176), pp. 149-158 (2012), with J. D. Osorio andA. Toro (senior author)

38. Mean field approximation of Langmuir-Hinshelwood CO-surface reactions considering lateralinteractions, J. Phys. Chem. C, vol. 117(30), pp. 15716-15727 (2013), with A. M. Gomez-Marın (senior author) [DOI: 10.1021/jp404711p]

39. Presentation of large DNA molecules for analysis as nanoconfined dumbbells, Macromolecules,vol. 46(20), pp. 8356-8368 (2013), with K. L. Kounovsky-Shafer, K. Jo, J. J. de Pablo, T. Odijkand D. C. Schwartz (co-senior author) [DOI: 10.1021/ma400926h]

40. Correlations between microstructure and mechanical properties of air plasma-sprayed thermalbarrier coatings exposed to high temperature, J. American Ceramic Soc., vol. 96(12), pp.39013907 (2013), with J. D. Osorio, M. Maya, A.C. Barrios, A. Lopera, F. Jimenez, J.M. Mezaand A. Toro (co-senior author) [DOI: 10.1111/jace.12621]

41. Microstructure of thermal barrier coating systems after exposure to high temperatures, Ce-ramics International, vol. 40(3), pp. 4663-4671 (2014), with J. D. Osorio and A. Toro(co-senior author) [DOI: 10.1016/j.ceramint.2013.09.007]

42. Ion Effects at Electrode/Solid Polymer Electrolyte Membrane Interfaces, Physical ChemistryChemical Physics, vol. 16(5), pp. 1945-1956 (2014), with A. M. Gomez-Marın (senior author)[DOI: 10.1039/c3cp54173h]

43. Effect of Poly(ethylene oxide) Homopolymer and Two Different Poly(ethylene oxide-b-poly(propyleneoxide)-b- poly(ethylene oxide) Triblock Copolymers on Morphological, Optical, and MechanicalProperties of Nanostructured Unsaturated Polyester,ACS Applied Materials & Interfaces,vol. 6(2), pp. 1073-1081 (2014), with D. Builes, A. Corcuera, I. Mondragon and A. Tercjak(co-author) [DOI: 10.1021/am4046266]

44. Langmuir-Hinshelwood mechanism including lateral interactions and species diffusion for COoxidation on metallic surfaces, J. Phys. Chem. C, in publication process (2014), with withA. M. Gomez-Marın (senior author) [DOI: 10.1021/jp409385k]s

45. Methodology for generation of Time-temperature-transformation (TTT)-diagram: AliphaticEpoxy Resin, J. App. Poly. Sci., in publication process (2014), with N. C. Restrepo (seniorauthor)

46. Phase transformations in air plasma sprayed Yttria-stabilized Zirconia thermal barrier coatings,DYNA-Colombia, in publication process (2014), with J. D. Osorio, A. Lopera and A. Toro(senior author)

47. Diffusion-reaction of aluminum and oxygen in Al2O3 thermally oxide grown layers, Heat &Mass Transfer, in publication process (2013-2014), with J. D. Osorio, J. Giraldo, J. C. Hernandezand A. Toro (senior author) [DOI: 10.1007/s00231-013-1249-1]

SUBMITTED PUBLICATIONS 2013

1. Numerical simulation to assess the elastic-strain energy distribution of a silicon rubber subjectedto a punch shear test, to DYNA-Colombia, with A. Lopera-Valle and F.A. Suarez-Bustamante(senior author)

2. Theoretical Voltammetric Response of Electrodes Coated by Solid Polymer Electrolyte Mem-branes, to Analytical Chimica Acta, with A. M. Gomez-Marın (senior author)

3. Armour ballistic assessment from tensile information: basic principle modeling, to J. Impact.Eng., with F.A. Suarez-Bustamante (senior author)

Juan P. Hernandez-Ortiz, Ph.D. 11/14

PUBLICATIONS IN PROCESS

1. Electrostatic Confinement and Manipulation of DNA Molecules for Genome Analysis, to Nat.Biotech., with K. L. Kounovsky-Shafer, K. Jo, J. J. de Pablo, T. Odijk and D. C. Schwartz(co-senior author), submission process

2. Towards the Colombian Light Soldier Concept, to Military Medicine, with N. Rozo-Lopez, G.D.Marın-Velasquez and F.A. Suarez-Bustamante (senior author), submission process

3. Bipolar, twisted-bipolar, hyper-twisted-bipolar and van Gogh mesophases in chiral liquid crystalnanodroplets, to Phys. Rev. Lett., with N. Martinez-Vara, J. A. Moreno-Razo, S.I. Hernaandez,E. Dıaz-Herrera and J. J. de Pablo (co-senior author), collapsing final results

4. Confined polyelectrolites with continuum solvent and ions: General Geometry Ewald-like methodand Nernst-Planck (NP-GGEM), to J. Theo. Comp. Chem., with J. Molina (director author),collapsing final results

5. Theoretically coarse-grain informed Monte Carlo method to study confined liquid crystals, toJ. Chem. Phys., with J. J. de Pablo and O. Guzman (co-author), collapsing final results

6. Global and local/quadrature RBF method in 3D: extraction of thermodynamic informationfrom free energy functionals, to SIAM J. Appl. Math, with V. Palacio and S. Villada (seniorauthor), collapsing final results

7. Glass transition and viscosity prediction of thin polymeric films from a leveling experiment, toJ. Chem. Phys. with A. Martiliano-Martinez, H. A. Castano-Osorio, D. A. Olaya-Munoz andP. Nealey (senior author), collapsing final results

8. Behavior and phases of molecular systems with chiral interactions, to Soft Matter, with N.Martinez-Vara, J. A. Moreno-Razo, S.I. Hernandez, E. Dıaz-Herrera and J. J. de Pablo (co-senior author), obtaining results

9. G’ and G” of thin polymeric films during leveling, to J. Rheol., with A. Martiliano-Martinez,H. A. Castano-Osorio, D. A. Olaya-Munoz and P. Nealey (senior author), obtaining results

10. Surface ordering in nano-drops containing nematic liquid crystals, to Soft Matter, with J. J. dePablo (co-author)

11. Parking and loading of polyelectrolytes at low ionic strength, to Phys. Rev. Lett., withK. L. Kounovsky-Shafer and D. C. Schwartz (1st author)

12. Modeling elastomeric and thermoset foams: kinetics, heat and nucleation, to Poly. Eng. Sci.,with N. C. Restrepo (director author)

13. Dimensional analysis for the ballistic protection mechanism in ceramic-polymer composites, toWEAR, Ceramics Int. or Polym. Comp, with F. A. Suarez (director autor)

14. An O(N) Green’s function method to calculate hydrodynamic interactions of particles in un-bounded and confined geometries: Stokesian-Dynamics-GGEM, to J. Fluid. Mech or J. Rheol-ogy, with M. D. Graham (co-author)

BOOKS and BOOK CHAPTERS

1. Boundary Integral Equations for Viscous Flows: non-Newtonian Behavior and Solid Inclusions,Ph.D. Dissertation, Department of Mechanical Engineering, University of Wisconsin-Madison,2004.

2. Polymer Processing−Modeling and Simulation, Hanser Publishers, Munich, 2006, with T. A. Os-swald [ISBN-10: 1569903980]

Juan P. Hernandez-Ortiz, Ph.D. 12/14

3. Continuous Equipment Simulation − Mixing Devices, with A. Londono-Hurtado and T.A.Osswald in Mixing and Compounding of Polymers, Ed. by I. Manas-Zloczower, 2nd Edition,Hanser Publishers, Munich, 2009 [ISBN-10: 1569904243]

4. KUNSTSTOFFVERARBEITUNG − Modellierung und Simulation, Hanser Publishers, Mu-nich, in process 2013-2014, with T. Tsigkopoulos and T. A. Osswald

5. Procesamiento de Polımeros − Modelacion y Simulacion, Editorial Guaduales, Cucuta, Colom-bia, in process 2013-2014, with I. D. Lopez and T. A. Osswald

INVITATIONS and LECTURES

2013 Invited Speaker, Feria Ingeniar 2013, Universidad Pontificia Bolivariana2013 Visiting Scholar, Department of Surgery, Division of Transplantation,

Dr. Luis Fernandez, University of Wisconsin-Madison2013 Visiting Scholar, Department of Radiology,

Dr. Christopher J. Francois, University of Wisconsin-Madison2013 Invited Speaker, 25th International Conference of Science and Technology of

Complex Fluids, Puebla, Mexico2013 Invited Professor, School of Science and Engineering Materials,

Universidad Autonoma de Mexico, Mexico DF2013 Speaker, Gordon Research Conferences, Physics and Chemistry of

Microfluidics Conference, Lucca, Italy2013 AiChE - Medellın, Inauguration Lecture, Universidad Nacional de Colombia, Medellın2012 Invited Professor, School of Science and Engineering Materials,

Universidad Autonoma de Mexico, Mexico DF2011 Session Chair, Society of Rheology 83rd Annual Meeting,

Cleveland, OH, United States2011 Keynote, Research Week, Universidad Nacional de Colombia, Medellın2011 Rheology Research Center Seminar, University of Wisconsin-Madison,

United States2010 International Silicone Conference, Cleveland, OH, United States2010 26th Engelberger Kunststofftechnisches, Engelberg, Switzerland2010 SFB 694 Lecture, University of Erlangen-Nuremberg, Germany2009 Short Course, Society of Rheology 81st Annual Meeting,

Madison, WI, United States2009 Workshop Flowing Complex Fluids, University of Minnesota,

Minneapolis, MN, United States2009 AiChE South-American Lecture, Universidad los Andes, Bogota, Colombia2009 SFB 694 Lecture, University of Erlangen-Nuremberg, Germany2008 Keynote, Colloquium ICIPC 15 anos, EAFIT, Medellın, Colombia2006 Invited Teaching Assistant, Technical University of Denmark, Copenhagen2002−2005 Invited Lecturer with Professor T. A. Osswald,

University of Erlangen-Nuremberg, Germany2004 Rheology Research Center Seminar, University of Wisconsin-Madison,

United States2004 Invited Lecturer, Universidad EAFIT, Medellın, Colombia2003 Rheology Research Center Seminar, University of Wisconsin-Madison,

United States

Juan P. Hernandez-Ortiz, Ph.D. 13/14

Other PROFESSIONAL SERVICES

− Ph.D. Committee: Department of Chemistry − University of Wisconsin-Madison; Departmentof Chemical Engineering, Department of Mechanical Engineering, Department of Mathematics −

Universidad Nacional de Colombia, Sede Medellın.− Proposal Reviewer: National Science Foundation, Colciencias, Universidad Nacional de Colom-bia and other Colombian universities− Reviewer: Journal of Applied Polymer Science, Physical Review Letters, Physical Review E,Journal of Fluid Mechanics, Journal of non-Newtonian Fluid Mechanics, Journal of Rheology, Ex-perimental Mechanics, Polymer Composites, Journal of Chemical Physics, Analyst, Nucleic AcidsResearch, New Journal of Physics, Applied Mathematics and Mechanics, Journal of the Royal Soci-ety Interface, Physics of Fluids, Heat and Mass Transfer and 10 other Colombian journals.− Scientific Advisory Board: Simtec Silicone Parts, TermalTec S.A., Ingema S.A.S., ThoR S.A.,and MEGA Solution Group

CONSULTING

I have performed consulting and advising to companies and institutions in aspects of materials science,energy management and research strategies: Gobernacion de Antioquia, Beneficiencia de Antioquia,IDEA, Colombian Armed Forces, Simtec Silicone Parts, Zenu S.A., Noel S.A., C.I. TermalTec S.A.,DevATecH S.A.S., Ingema S.A.S., ThoR, Plasticos Jordao, Amplax, Ingema, Sopesa, Ethus Group,Electricas de Medellın, Celsa S.A., Empresas Publicas de Medellın, IngePol S.A.

MEMBERSHIPS and ASSOCIATIONS

American Physical Society (APS):− Division of Fluid Dynamics (DFD)− Division of Polymer Physics (DPOPY)− Division of Biological Physics (DBIO)− Division of Condensed Matter Physics (DCMP)− Division of Computational Physics (DCOMP)

American Institute of Chemical Engineers (AiChE)

The Society of Rheology (SOR)

Juan P. Hernandez-Ortiz, Ph.D. 14/14

REFERENCES

Juan J. de PabloLiew Family Professor of Molecular Theory and SimulationInstitute for Molecular EngineeringUniversity of Chicago5747 South Ellis Avenue, JONES 216Chicago, IL 60637Tel: +1-773-702-7791Email: depablo@uchicago.edu

Tim A. Osswald (Ph.D. Thesis advisor)K.K. and Cindy Wang ProfessorDepartment of Mechanical Engineering,University of Wisconsin-Madison,1513 University Avenue,Madison, Wisconsin, 53706-172Tel: +1-608-263-9538Fax: +1-608-265-2316Email: osswald@engr.wisc.edu

David C. SchwartzProfessor of Chemistry and Genetics,University of Wisconsin-Madison,Laboratory for Molecular and Computational Genomics,425 Henry Mall,Madison, Wisconsin, 53706-1691Tel: +1-608-265-0546Email: dcschwartz@wisc.edu

Paul F. NealeyBrady W Dougan Family Professor in Molecular EngineeringInstitute for Molecular EngineeringUniversity of Chicago5747 South Ellis Avenue, Jones 217Chicago, IL 60637Tel: +1-773-702-9143Email: nealey@uchicago.edu

January 22, 2014. Medellın, Colombia.