GIVE ME A LIFTING POINT,AND I WOULD MOVE THE WORLD!
Juli Lifting Equipment
Phone: +27 (0)11 822-0200Fax: +27 (0)11 822-0220Email: [email protected]: No.3 Sam Green Street, Tunney Ext 6, Germiston, Johannesburg 1401www.juli.co.za
COMPANY PROFILE
Juli Lifting Equipment Pty Ltd is a South African registered company, we are the sole distributor of Juli Sling’s forged products in SADC region, as well as a distributor of full range of Juli lifting equipment in Southern Africa. We provide professional services and most complete range of lifting products. Juli Lifting Equipment has a BEE level 4, we have a number of international certifi ca-tions including ISO 9001, ISO14001, ISO18001, CE, GL, API, & DNV etc.
Juli Sling Co., Ltd was funded in 1985, today it is the largest rigging manufac-turer in Asia, turnover in 2011 reached USD 420 million. Juli was successfully listed in Shenzhen Stock Exchange on 26 January 2010.
OVERVIEW OF 670 000m2 JULI INDUSTRIAL PARK
Juli Sling Co., Ltd. is the largest rigging manufacturing company in China.
ENTERPRISE TECHNICAL CENTER & QUALIFICATION
RIGGING DESIGN AND RESEARCH INSTITUTEJuli Sling Co., Ltd is a Hi-Tech enterprise, we are able to issue credited certi-fi cations from our National Technology Centre, Hebei Sling Technology R&D Centre and national standard testing laboratory. Rigging Design and Research Institute has the leading technology in the industry, consist of 249 engineers.
Juli owns 124 exclusive patents, and has implemented 1 550 industry stand-ards in China. Juli also participated in setting up 21 Chinese National and Industrial Standards.
ENTERPRISE QUALIFICATIONJuli Sling Co., Ltd is ISO 9001, 14001 and 18001 approved. Other international certifi cations achieved are CE, LR, GL, DNV, CCS, API, CNAS, KR etc.
SALES NETWORK
Juli has a global marketing and service network, with 70 branches in China, 10 subsidiaries in the world, and a sales network that covers over 80 countries.
• To supply the best quality rigging equipment.
• To provide hoist and structural technical solutions.
PRODUCT CONTENT
TEXTILE SLING(P01-05)
STEEL WIRE ROPE SLING(P12-15)
CHAIN SLING FITTING(P23-26)
CHAIN BLOCK & LEVER HOIST(P34)
MOORING ROPE(P35-37)
CHAIN AND CHAIN SLING(P16-20)
STEEL WIRE ROPE(P06-11)
SHACKLES(P21-22)
CABLE(P38-40)
RIGGING EQUIPMENT(P42)
METALLURGY CLAMP(P29-33)
LIFTING CLAMP(P27-28)
TEXTILE SLING
Textile Sling
01
TEXTILE SLING
We supply common and special textile slings. Slings have 7:1 safety factor, WLL from 0.5 Tons to 2000 Tons, length from 0.5 Mtr to 100 Mtr.
TYPE W01 (EYE TYPE)
Note: 6:1 & 7:1 safety factor is available.
Art. No. WorkingLoad Limit
Approx Thickness Approx Width L
Eye Length
Weight
5, 6, 7:1 5, 6:1 7:1 Minimum Length
Maximum Length 5:1 6:1 7:1
W01-01 1000 7.5 25 30 1.1 100 300 0.19 0.20 0.26W01-02 2000 7.5 50 60 1.2 100 300 0.36 0.41 0.45W01-03 3000 7.5 75 90 1.3 100 350 0.56 0.60 0.71W01-04 4000 7.5 100 120 1.4 100 500 0.70 0.75 1.02W01-05 5000 7.5 125 150 2.0 100 550 0.89 1.02 1.21W01-06 6000 7.5 150 180 2.0 100 600 0.98 1.26 1.42W01-08 8000 7.5 200 240 2.0 100 700 1.36 1.69 1.89W01-10 10000 7.5 250 300 3.0 100 800 1.82 2.07 2.34W01-12 12000 7.5 300 300 3.0 100 900 2.22 2.37 2.98
Patent Number ZL 2006 2 0019175.8
TEXTILE SLINGTextile S
ling
02
TYPE W02 (HEAVY EYE TYPE)
Art. No. WorkingLoad Limit
Approx Thickness Approx Width LEye Length
Weight
5, 6, 7:1 5, 6:1 7:1 Minimum Length
Maximum Length 5:1 6:1 7:1
W02-02 2000 15 25 30 1.5 100 350 0.4 0.45 0.53W02-04 4000 15 50 60 1.5 100 400 0.8 0.85 0.93W02-06 6000 15 75 90 1.5 100 450 1.18 1.34 1.45W02-08 8000 15 100 120 2.0 100 500 1.55 1.79 2.05W02-10 10000 15 125 150 2.0 100 550 1.95 2.26 2.66W02-12 12000 15 150 180 3.0 100 600 2.29 2.72 2.96W02-16 16000 15 200 240 3.0 100 700 3.16 3.68 3.82W02-20 20000 15 250 300 3.0 100 800 4.32 4.73 4.96W02-24 24000 15 300 300 3.0 100 900 4.88 5.21 5.59
Note: 6:1 & 7:1 safety factor is available.
Patent Number ZL 2006 2 0019175.8
TYPE R01 (ENDLESS TYPE)
Art. No. WorkingLoad Limit
Approx Thickness
Approx Width
L Weight
Minimum Length
Maximum Length 6:1 7:1 8:1
R01-01 1000 6 40 0.5 80 0.30 0.35 0.42
R01-02 2000 7 50 0.5 80 0.44 0.52 0.62
R01-03 3000 8 60 0.5 80 0.65 0.74 0.89
R01-04 4000 9 70 0.5 80 0.83 0.91 1.09
R01-05 5000 11 75 0.5 80 1.01 1.29 1.55
R01-06 6000 12 80 1.0 80 1.19 1.39 1.67
R01-08 8000 13 90 1.0 80 1.50 1.75 2.10
R01-10 10000 15 100 2.0 80 1.95 2.28 2.74
R01-12 12000 16 110 2.0 80 2.46 2.87 3.44
R01-15 15000 18 125 2.0 80 2.97 3.47 4.16
R01-20 20000 20 150 2.5 80 4.66 5.44 6.53
R01-25 25000 24 180 2.5 80 5.84 6.82 8.18
R01-30 30000 32 200 2.5 80 9.23 10.8 13.0
R01-40 40000 40 200 2.5 80 12.1 14.2 17.0
R01-50 50000 45 220 2.5 80 14.1 16.3 19.6
R01-60 60000 65 240 4.0 80 17.3 20.2 24.2
R01-80 80000 70 260 4.0 80 22.2 25.9 31.1
R01-100 100000 80 290 4.0 80 26.0 30.3 36.4
R01-200 200000 120 450 5.0 80 55.0 64.1 77.0
R01-300 300000 160 525 5.0 80 79.0 92.2 110.6
R01-400 400000 200 670 5.0 80 98.4 114.8 137.8
R01-500 500000 220 750 8.0 80 121.2 141.4 169.7
R01-600 600000 240 820 8.0 80 145.0 169.2 203.0
R01-700 700000 260 870 8.0 80 168.0 196.0 235.2
R01-800 800000 280 930 9.0 80 192.0 224.0 268.8
R01-900 900000 300 990 9.0 80 215.0 250.1 300.1
R01-1000 1000000 320 1050 9.0 80 238.0 277.7 333.2
Note: 6:1 & 7:1 & 8:1 safety factor is available, can provide fl uorescence and light-fest style if required.
Patent Number ZL 2006 2 0019175.8
TEXTILE SLING
Textile Sling
03
TYPE R02 (PROTECTION TYPE)
Note: 6:1 & 7:1 safety factor is available, can provide fl uorescence and light-fest style if required.
Patent Number ZL 2006 2 0019175.8
Patent Number ZL 2006 2 0167465.7
LIFTING BELT ASSEMBLY
TEXTILE SLINGTextile S
ling
04
Act
ual p
erfo
rman
ce o
f the
slin
g is
affe
cted
by
liftin
g an
gle
and
styl
e.
TEXTILE SLING
Textile Sling
05
CARGO STRAPS
TYPE LS01
TYPE LS02
TYPE LS04
TYPE LS03
Note: End fi ttings are changeable.
Note: End fi ttings are changeable. Note: End fi ttings are changeable.
STEEL WIRE ROPES
teel Wire R
ope
06
STEEL WIRE ROPE
Steel wire rope factory has an annual design capacity of 100 000 tons. Products include ɸ1.8mm - ɸ260mm rope, line contact steel wire rope, compacted strand wire rope and steel cable. We have the largest KS8/2500 rope machine that has a maximum capacity of 350 tons. Column with the largest number of KGT72/630 basket stranding machine.
STEEL WIRE ROPE
Steel W
ire Rope
07
APPLICATION OF STEEL WIRE ROPE
STEEL WIRE ROPES
teel Wire R
ope
08
STEEL WIRE ROPE
Rope typeConstruction
Rope DiameterWire Rope Strand
Single-strand wire rope
1×7 (1+6) 1.8-10.51×19 (1+6+12) 3.0-161×37 (1+6+12+18) 4.2-22.51×61 (1+6+12+18+24) 18-321×91 (1+6+12+18+24+30) 22-40
6×76×7 (1+6) 6-36
6×9W (3+3/3) 14-36
6×19(a)
6×19S (1+9+9) 12-426×19W (1+6+6/6) 12-426×25Fi (1+6+6F+12) 16-42
6×26WS (1+5+5/5+10) 16-426×31WS (1+6+6/6+12) 18-42
6×19(b) 6×19 (1+6+12) 9-46
6×37(a)
6×29Fi (1+7+7F+14) 18-646×36WS (1+7+7/7+14) 16-906×41WS (1+8+8/8+16) 38-100
6×49SWS (1+8+8+8/8+16) 38-1006×55SWS (1+9+9+9/9+18) 38-102
6×37S (1+6+15+15) 16-646×37(b) 6×37 (1+6+12+18) 13-66
6×61(a)6×61FWS (1+5+5F+10+10/10+20) 60-1106×64SFS (1+9+9+9F+18+18) 60-102
6×61(ab)6×65FNS (1+6+6F+12-20+20) 60-116
6×80WSNS (1+7+7/7+14-22+22) 60-1306×84WSNS (1+7+7/7+14-24+24) 60-142
6×91(ab)6×111SWSNS (1+9+9+9/9+18-28+28) 60-1286×103FSNS (1+7+7F+14+14-30+30) 60-156
6×109SWSNS (1+8+8+8/8+16-30+30) 60-1566×61(b) 6×61 (1+6+12+18+24) 40-110
6×12 6×12+7FC (FC+12) 8-12
6×246×24 (FC+9+15) 12-46
6×24S (FC+12+12) 14-446×24W (FC+8+8/8) 14-44
8×19(a)
8×19S (1+9+9) 16-508×19W (1+6+6/6) 16-508×25Fi (1+6+6F+12) 18-56
8×26WS (1+5+5/5+10) 16-548×31WS (1+6+6/6+12) 16-92
7×[6×37(a)+IWR]6×[6×36WS+IWR]+IWRC 192-2606×[6×41WS+IWR]+IWRC 192-260
6×[6×49SWS+IWR]+IWRC 192-260
7×[6×61(a)+IWR]6×[6×55SWS+IWR]+IWRC 192-2606×[6×61FWS+IWR]+IWRC 192-2606×[6×64SFS+IWR]+IWRC 192-260
7×[6×37(b)+IWR] 6×[6×37+IWR]+IWRC 192-2607×[6×61(b)+IWR] 6×[6×61+IWR]+IWRC 192-260
9×[6×37(a)+IWR]8×[6×36WS+IWR]+IWRC 192-2608×[6×41WS+IWR]+IWRC 192-260
8×[6×49SWS+IWR]+IWRC 192-260
9×[6×61(a)+IWR]8×[6×55SWS+IWR]+IWRC 192-2608×[6×61FWS+IWR]+IWRC 192-2608×[6×64SFS+IWR]+IWRC 192-260
9×[6×37(b)+IWR] 8×[6×37+IWR]+IWRC 192-2609×[6×61(b)+IWR] 8×[6×61+IWR]+IWRC 192-260
Rou
nd S
tran
ded
Wir
e R
ope
Ste
el S
tran
d C
able
STEEL WIRE ROPE
Steel W
ire Rope
09
Rope typeConstruction
Rope DiameterWire Rope Strand
8×37(a)
8×29Fi (1+7+7F+14) 22-668×36WS (1+7+7/7+14) 18-1088×41WS (1+8+8/8+16) 28-120
8×49SWS (1+8+8+8/8+16) 40-1208×55SWS (1+9+9+9/9+18) 40-124
8×37(b) 8×37 (1+6+12+18) 60-86
8×61(a)8×61FWS (1+5+5F+10+10/10+20) 60-1368×64SFS (1+9+9+9F+18+18) 60-124
8×61(ab)8×65FNS (1+6+6F+12-20+20) 60-140
8×80WSNS (1+7+7/7+14-22+22) 60-1588×84WSNS (1+7+7/7+14-24+24) 60-172
8×91(ab)8×111SWSNS (1+9+9+9/9+18-28+28) 60-1568×103FSNS (1+7+7F+14+14-30+30) 60-190
8×109SWSNS (1+8+8+8/8+16-30+30) 60-1908×61(b) 8×61 (1+6+12+18+24) 60-120
18×717×7 (1+6) 12-4418×7 (1+6) 12-50
18×1918×19S (1+9+9) 18-5018×19W (1+6+6/6) 14-5018×19 (1+6+12) 14-50
34×734×7 (1+6) 16-6036×7 (1+6) 16-60
35W×735W×7 (1+6) 16-6024W×7 (1+6) 16-50
4V×394V×39S (FC+9+15+15) 14-504V×48S (FC+12+18+18) 20-50
6V×7 6V×19 (/1×7+3/+9) 20-36
6V×19
6V×21 (FC+9+12) 18-366V×24 (FC+12+12) 18-366V×30 (6+12+12) 22-386V×34 (/1×7+3/+12+12) 28-44
6V×376V×37 (/1×7+3/+12+15) 32-52
6V×37S (/1×7+3/+12+15) 32-526V×43 (/1×7+3/+15+18) 38-58
35W×K735W×K7 1+6 20-42
35W×K19S 1+9+9 35-5235W×K26S 1+5+5/5+10 40-60
18×K7 18×K7 1+6 12-4818×K19 18×K19S 1+9+9 24-6015×K7 15×K7 1+6 20-6016×K7 16×K7 1+6 20-60
16×K196×K19S 1+9+9 16-40
6×K26WS 1+5+5/5+10 16-406×K31WS 1+6+6/6+12 20-40
6×K376×K36WS 1+7+7/7+14 24-606×K41WS 1+8+8/8+16 38-60
8×K19
8×K17S 1+8+8 20-388×K19S 1+9+9 20-40
8×K26WS 1+5+5/5+10 20-428×K31WS 1+6+6/6+12 24-50
8×K378×K36WS 1+7+7/7+14 28-608×K41WS 1+8+8/8+16 30-72
JL1618K JL1618K 1+6 18-60
JL1710K
JL1710K26WS 1+5+5/5+10 20-50JL1710K31WS 1+6+6/6+12 20-50JL1710K36WS 1+7+7/7+14 30-50JL1710K41WS 1+8+8/8+16 30-50
JL1712KJL1712K7 1+6 20-40
JL1712K19S 1+9+9 30-60
JLCF16K
JLCF16K26WS 1+5+5/5+10 28-38JLCF16K31WS 1+6+6/6+12 28-40JLCF16K36WS 1+7+7/7+14 28-42JLCF16K41WS 1+8+8/8+16 40-50
JLCF17K
JLCF17K26WS 1+5+5/5+10 20-50JLCF17K31WS 1+6+6/6+12 28-50JLCF17K36WS 1+7+7/7+14 28-60JLCF17K41WS 1+8+8/8+16 40-72
STEEL WIRE ROPER
ound
Str
ande
d W
ire
Rop
eS
hap
Str
ande
dW
ire
Rop
eC
ompa
cted
Sta
ndW
ire
Rop
eC
ompa
cted
Sta
ndW
ire
Rop
e
STEEL WIRE ROPES
teel Wire R
ope
10
ROUND STRAND WIRE ROPE
• Rope type: 6×19(a), 6×37(a)• Rope Construction: 6×25Fi+FC 6×25Fi+IWR 6×26WS+FC 6×26WS+IWR 6×29Fi+FC 6×29Fi+IWR
6×31WS+FC 6×31WS+IWR 6×36WS+FC 6×36WS+IWR 6×37S+FC 6×37S+IWR 6×41WS+FC 6×41WS+IWR 6×49SWS+FC 6×49SWS+IWR 6×55SWS+FC 6×55SWS+IWR
WEIGHT FACTOR AND MINIMUM BREAKING STRENGTH FACTOR LARGE STEEL WIRE
ROPE
STEEL WIRE ROPE
Steel W
ire Rope
11
Note 1: in item 2 and 4, the weight factor will be 3% less when wires quantity of one stand is 19 or less than 19.Note 2: in item 13 stands are the weight factor and minimum breaking strength factor of equidistant twisted length, both factors will be 4% more than the list of table.Note 3: K1p is the weight factor for wire rope with polypropylene core.
WEIGHT FACTOR AND MINIMUM BREAKING STRENGTH FACTOR OF STEEL WIRE ROPE
FOR GENERAL PURPOSE
STEEL WIRE ROPE SLINGS
teel Wire R
ope Sling
12
STEEL WIRE ROPE SLING
We can supply Endless Wire Rope Sling, High Tension Endless Wire Rope Sling, Spliced Steel Cable Sling, Pressed and Casting Sling, Pressed and Spliced Sling. Scope from 6mm – 570mm diameter. We have the largest 10 000 tons pressing machine in Asia.
STEEL WIRE ROPE SLING
Steel W
ire Rope S
ling
13
• Grommet sling is available from ɸ10 - ɸ570mm.• Available for limited space lifting, the shortest sling circumference will be 35 times of sling diameter.• The minimum bend radius of the hanging point area
should not be less than 1.5 Dia.• Min breaking load of grommet sling is 6WLL.
ENDLESS WIRE ROPE SLING
STEEL WIRE ROPE SLINGS
teel Wire R
ope Sling
14
ENDLESS WIRE ROPE SLING (CONTINUED TABLE)
SPLICED STEEL CABLE SLING (SPLICED STEEL CABLE SLING)
STEEL WIRE ROPE SLING
Steel W
ire Rope S
ling
15
SPLICED STEEL WIRE ROPE SLING
PRESSED STEEL WIRE ROPE SLING Patent Number ZL 2006 3 0000330.7
SINGLE LEG PRESSED STEEL WIRE ROPE SLING
CHAIN AND CHAIN SLINGC
hain and Chain S
ling
16
CHAIN AND CHAIN SLING
Chain factory has annual output of more than 1 500 tons, mainly produce high tensile round link chain and chain sling. Chain making machines include WAFIOS (German) and SPECTROMAXx.
HIGH TENSION ROUND LINK CHAIN FOR MINING
• Standard: GB/T12718-2009• Quality grade: B• Marks: 1. Quality grade mark, such as “JLB”.• Marks: 2. Mining safety logo “MA”, “KA”.
The maximum elongation rate at testing load is 1.4%. The minimum total elongation rate at breaking load is 12%.
CHAIN AND CHAIN SLING
Chain and C
hain Sling
17
HIGH TENSION ROUND LINK CHAIN FOR MINING• Standard: GB/T12718-2009• Quality grade: C• Marks: 1. Quality grade mark, such as “JLC”.• Marks: 2. Mining safety logo “MA”, “KA”.
The maximum elongation rate at testing load is 1.6%. The minimum total elongation rate at breaking load is 12%.
ROUND LINK CHAINS FOR MINING• Standard: DIN22252:2001.• Quality grade: 2.
The maximum elongation rate at testing load is 1.6%. The minimum total elongation rate at breaking load is 14%.
HIGH-TENSILE STEEL COMPACT CHAINS FOR MINING
• Standard: MT/T929-2004.
The maximum elongation rate at testing load is 1.6%. The minimum total elongation rate at breaking load is 12%.
CHAIN AND CHAIN SLINGC
hain and Chain S
ling
18
STEEL COMPACT CHAINS FOR MINING
• Standard: DIN22255-2001.
LIFTING CHAIN• Standard: GB/T20946, EN818-2.• Strength grade: 8.• Safety assurance: 4 times safety factor.• Marks: strength grade, such as “G80”.
LIFTING CHAIN
• Standard: EN818-2.• Strength grade: 8.• Safety assurance: 4 times safety factor.
CHAIN AND CHAIN SLING
Chain and C
hain Sling
19
LIFTING CHAIN• Standard: GB/T24816-2009.• Strength grade: 8.• Safety assurance: 4 times safety factor.
ROUND LINK LASHING CHAIN• Standard: EN818-2, GB/T12718-2009.
ROUND LINK FISHING CHAIN• Standard: EN818-2, GB/T12718-2009.
CHAIN AND CHAIN SLINGC
hain and Chain S
ling
20
T (8) CHAIN SLING• Standard: Q/JL018.• Safety assurance: 4 times safety factor.
ENDLESS CHAIN SLING• Standard: Q/JL018.• Safety assurance: 4 times safety factor.
SHACKLES
Shackles
21
SHACKLES
Annual capacity is 20 000 tons. High quality alloy steel is used to manufacture Shackles that have minimum breaking load of 6 times of WLL. The working capacity is from 0.5 tons – 1 500 tons. We have 5T free forging machine, 4 000 tons, 2 500 tons, 1 000 tons friction press machine, and 750 kg – 1 000 kg air forging hammer. The minimum breaking load is 6 times of WLL. Our prod-ucts correspond with the technical requirement and test approach stipulated in ISO2415-2004.
SHACKLESS
hackles
22
GRADE S(6) BOW SHACKLE Patent Number ZL 2006 3 0000331.1
GRADE S6 D SHACKLE Patent Number ZL 2006 3 0000331.1
CHAIN SLING FITTING
Chain S
ling Fitting
23
CHAIN SLING FITTING
We supply chain sling connectors, hooks and rings that are used to assemble Chain Slings. The working capacity is from 0.5 – 600 tons.
EYE HOOK
• The hook body is manufactured using high-quality alloy steel by die forging.• Proof load is 2 times of the Working Load Limit. Minimum Ultimate Load is
4 times of the Working Load Limit.• Heat treated.• There are signs such as Working Load Limit and grade on the link.
CHAIN SLING FITTINGC
hain Sling Fitting
24
EYE SLIP HOOK
• The hook body is manufactured using high-quality alloy steel by die forging.• Proof load is 2 times of the Working Load Limit. Minimum Ultimate Load is
4 times of the Working Load Limit.• Heat treated.• There are signs such as Working Load Limit and grade on the link.
EYE GRAB HOOK
• The hook body is manufactured using high-quality alloy steel by die forging.• Proof load is 2 times of the Working Load Limit. Minimum Ultimate Load is
4 times of the Working Load Limit.• Heat treated.• There are signs such as Working Load Limit and grade on the link.
MACHINERY EYE BOLTS
• For the bolt of ring: M8-M64: Alloy steel forging, M72-M100: Alloy steel welded.
• Proof load is 2 times of the Working Load Limit. Minimum Ultimate Load is 4 times of the Working Load Limit.
• Profi le size and the testings should according to ISO3266-1984 and GB825-88
CHAIN SLING FITTING
Chain S
ling Fitting
25
CLEVIS GRAB HOOK
• The hook body is manufactured using high-quality alloy steel by die forging.
• Proof load is 2 times of the Working Load Limit. Minimum Ultimate Load is 4 times of the Working Load Limit.
• Heat treated.• There are signs such as Working Load Limit and grade on the link.
CLEVIS SLIP HOOK (WITH CLIP)
• The hook body is manufactured using high-quality alloy steel by die forging.
• Proof load is 2 times of the Working Load Limit. Minimum Ultimate Load is 4 times of the Working Load Limit.
• Heat treated.• There are signs such as Working Load Limit and grade on the link.
S HOOK• The hook body is manufactured using high-quality alloy steel by die forging.• Proof load is 2 times of the Working Load Limit. Minimum Ultimate Load is 4
times of the Working Load Limit.• Heat treated.• There are signs such as Working Load Limit and grade on the link.
CHAIN SLING FITTINGC
hain Sling Fitting
26
MASTER LINK• Adopt high-quality alloy steel and throughout swaged forging process.• Circular link is manufactured by forging.• Proof load is 2 times of the Working Load Limit. Minimum Ultimate Load
is 4 times of the Working Load Limit.• Heat treated.
G80 MASTER LINK ASSEMBLY (EUROPEAN TYPE)• According with standards DIN5688 3-86.• Adopt high-quality alloy steel and throughout swaged forging process and welding.• The master link assembly (European Type) is manufactured by forging and welding.• Special Heat Treated.• Non-destructive test was performed.
G80 CONNECTING LINK• Adopt high-quality alloy steel and throughout swaged forging process.• Working load limit: 1.5t - 31.5t.• Proof load is 2 times of the Working Load Limit. Minimum Ultimate
Load is 4 times of the Working Load Limit.• Heat treated. • There are signs such as Working Load Limit and grade on the link.• Used with chain, simply and fi rmly.
LIFTING & METALLURGY CLAMP
Lifting & M
etallurgy Clam
p
27
LIFTING & METALLURGY CLAMP
Juli specialises in design, develop, manufacture and install all types of lifting & metallurgy clamps, products with capacity from 1 – 1 000 tons.
HORIZONTAL LIFTING CLAMP
LIFTING & METALLURGY CLAMPLifting &
Metallurgy C
lamp
28
OVERTURN CLAMP
VERTICAL LIFTING CLAMP
(OIL DRUM CLAMPS) YQC
LIFTING & METALLURGY CLAMP
Lifting & M
etallurgy Clam
p
29
CLAMPS• 5 – 80 tons are available, please enquire for detailed specifi cations.
ELECTRIC SLAB CLAMP• 32 and 50 tons available, please enquire for detailed specifi cations.
ELECTRIC TRANSLATION SLAB CLAMP• 40, 60 and 90 tons are available, please enquire for detailed specifi cations.
MEDIUM PLATE• 10 – 32 tons are available, please enquire for detailed specifi cations.
LIFTING & METALLURGY CLAMPLifting &
Metallurgy C
lamp
30
PLATE CLAMP• 3 – 20 tons are available, please enquire for detailed specifi cations.
VERTICAL LIFTING REELING PLATE CLAMP (ENDLESS WIRE ROPE SLING TYPE)• 12.5, 16, and 32 tons are available, please enquire for detailed specifi cations.
VERTICAL LIFTING ROLLING PLATE CLAMP (BRACE RLD TYPE)• 6, 20 and 32 tons are available, please enquire for detailed specifi cations.
SINGLE-SIDE VERTICAL WRAPPED PLATE CLAMP• 32 tons is available, please enquire for detailed specifi cations.
LIFTING & METALLURGY CLAMP
Lifting & M
etallurgy Clam
p
31
DOUBLE-SIDE VERTICAL WRAPPED PLATE CLAMP• 15 and 30 tons are available, please enquire for detailed specifi cations.
C TYPE PLATE BENDING• 5 – 32 tons are available, please enquire for detailed specifi cations.
ELECTRIC HORIZONTAL ROLLING CLAMP (GEAR RACK DRIVE)• 10, 20, 30 and 40 tons are available, please enquire for detailed specifi cations.
ELECTRIC HORIZONTAL ROLLING CLAMP (THREE SLICES POLE DRIVE)• 10, 20, 30 and 40 tons are available, please enquire for detailed specifi cations.
LIFTING & METALLURGY CLAMPLifting &
Metallurgy C
lamp
32
ELECTRIC ROTATION HORIZON-TAL ROLLING CLAMP (GEAR RACK DRIVE)• 10, 20, 30 and 40 tons are available, please
enquire for detailed specifi cations.
ELECTRIC VERTICAL MODE TURN CLAMP• 30 tons is available, please enquire for detailed specifi cations.
ROUND STEEL CLAMP• 1 – 6 tons are available, please enquire
for detailed specifi cations.
MECHANICAL STEEL COIL CLAMP• 20 and 35 tons are available, please enquire for
detailed specifi cations.
LIFTING & METALLURGY CLAMP
Lifting & M
etallurgy Clam
p
33
STEEL INGOT HOISTING MECHANISMS• 25, 35, 150, 350 and 500 tons are available, please enquire for detailed specifi cations.
SINGLE ROLLER HOISTING MECHANISMS• 16 – 63 tons are available, please enquire for detailed specifi cations.
BEAM ROLLER HOISTING MECHANISMS
DOUBLE ROLLER HOISTING MECHANISMS• 10 – 63 tons are available, please enquire for detailed specifi cations.
CHAIN BLOCK & LEVER HOISTC
hain Block &
Lever Hoist
34
HSZ-A 619 CHAIN BLOCKModel HSZ-0.5A HSZ-1A HSZ-1.5A HSZ-2A HSZ-3A HSZ-5A HSZ-10A HSZ-20A HSZ-30A HSZ-50A
Capacity tons 0.5 1 1.5 2 3 5 10 20 30 50
Standard lift m 2.5 2.5 2.5 3 3 3 3 3 3 3
Running test load KN 7.5 15 22.5 30 45 62.5 125 250 375 625
Effort required to lift rated load N 231 309 320 360 340 414 414 414×2 435×2 435×2
Strands of load chain 1 1 1 1 2 2 4 8 12 22
Load chain diameter mm 6 6 8 8 8 10 10 10 10 10
A 131 140 161 161 161 186 207 215 350 406
Dimensions(mm)
B 127 158 174 187 199 253 398 650 680 962
C 270 317 399 414 465 636 798 890 1380 2578
D 35 35.5 45 42.5 50 64 85 110 110 170
K 30 28 36 33.5 40 50 64 85 85 85
Net weight kg 10 12 19 20 27 45.5 83 193 220 1092
Extra weight per metre of extra lift kg 1.7 1.7 2.3 2.3 3.7 5.6 9.7 19.4 29.1 53.4
HSH-0.5A LEVER HOIST
Model HSH-0.5A
Capacity tons 0.5
Standard lift m 1.5
Running test load KN 6.3
Effort required to lift rated load N 340
Strands of load chain 1
Load chain diameter mm 5
A 105
Dimensions(mm)
B 78
C 80
D 35
Hmin 260
L 300
K 30
Net weight kg 4
Packing measurement cm 35.5×9.5×11.5
Extra weight per metre of extra lift kg 0.52
Chain Block & Lever Hoist
MOORING ROPE
Mooring R
ope
35
MOORING ROPE
Mooring rope is made from high-quality synthetic fi bre, manufactured by advanced braiding machine and excellent craftwork. Construction incudes: 3, 6, 8 and 12 strands. Raw mate-rial includes: polyprophylene, polyester, nylon, ultrahigh molecular weight polyethylene and aramid fi bre. Working Capacity is ɸ6mm - ɸ140mm.
3-STRAND MOORING ROPE
Note: 1Ktex=1g/m 1daN=0.01kN
Mooring R
ope
36
MOORING ROPE
6-STRAND MOORING ROPE
Note: 1Ktex=1g/m 1daN=0.01kN
8-STRAND MOORING ROPE AND 12-STRAND MOORING ROPE
Note: 1Ktex=1g/m 1daN=0.01kN
MOORING ROPE
Mooring R
ope
37
HIGH STRENGTH 3-STRAND ROPE
Note: 1Ktex=1g/m 1daN=0.01kN
HIGH STRENGTH MOORING ROPE
CABLEC
able
38
CABLE
Juli specialises in design, develop, manufacture, test, install and construct cables with annual output of more than 50 000 tons. Largest cable built was ɸ7 x 649.
CABLE
Cable
39
CABLE BODY PARAMETER TABLE CABLE BODY PARAMETER TABLE
TECHNICAL PARAMETERS FOR PPWS SUSPENSION BRIDGE
TECHNICAL PARAMETERS FOR HOT-CAST UPSETTED ANCHORAGE PPWS SUSPENSION BRIDGE
TECHNICAL PARAMETERS OF UPSETTED ANCHORAGE FOR PPWS SUSPENSION BRIDGE
FORK-EAR UNIDIRECTIONAL THREADED ROD TYPE Patent Number ZL 2006 2 0175525.X
FORK-EAR AND SLEEVE TYPE Patent Number ZL 2006 2 0175527.9
SINGLE-EAR AND SLEEVE TYPE
CABLEC
able
40
DOUBLE THREADED RODS TYPE Patent Number ZL 2006 2 0175528.3
COLD CAST UPSETTED ANCHORAGE (ENTERPRISE STANDARD)
COLD-CAST UPSETTED ANCHORAGE (ENTERPRISE STANDARD)
CABLE-FOR ARCHITECTURAL CONSTRUCTION
FORK-EAR BIDIRECTIONAL THREADED ROD TYPE
CABLE-FOR ARCHITECTURAL CONSTRUCTION
SUCCESSFUL PROJECTS
Successful P
rojects
41
STEEL CABLE OF CONSTRUCTION
Guangzhou Railway Station• Size: 5x61-337. There are 6 sizes of cables used,
which total to 4074 pieces of cables.• 523.6 Tons of cables are used.• Maximum weight per cable is 7 Tons.
The Yangtze Highway Bridge in Changshou Chongqing
• Size: 7 x 127 – 283. There are 7 types of cables used, which total to 468 pieces of cables.
• 2451.30 Tons of cables are used.• The biggest single cable is 23.70 Tons.
SHIPYARD GANTRY CRANE
Lifting capacity: 100t ~ 600tSpan: 35m ~ 150m
RIGGING EQUIPMENTR
igging Equipm
ent
42
Rigging Equipment
Juli offers the most advanced deep-processing equipment for steel wire rope manufacture, which is up to 360mm diameter.
HYDRAULIC PRESSED MACHINE
MODEL YSD1 HYDRAULIC STEEL WIRE ROPE PRESSED MACHINE
MODEL YSD2 HYDRAULIC STEEL WIRE ROPE SLING PRESSED MACHINE
To provide the best all-around top quality sling in the world!
Phone: +27 (0)11 822-0200Fax: +27 (0)11 822-0220Email: [email protected]: No.3 Sam Green Street, Tunney Ext 6, Germiston, Johannesburg 1401www.juli.co.za
Juli Lifting Equipment
