+ All Categories
Home > Documents > KEY INDICATOR - ametuniv.ac.in

KEY INDICATOR - ametuniv.ac.in

Date post: 03-Nov-2021
Category:
Upload: others
View: 12 times
Download: 0 times
Share this document with a friend
30
Books 2019-2020 Sl. No. ISBN number Title of the book/chapters published/ Title of the paper/ Title of the proceedings of the conference/ Name of the conference Author Year of public ation Affiliating Institute at the time of publication Name of the publishe r 1 978-93-87862-82-1 Load Frequency Control in Deregulated Power System Dr.D.Lakshmi NA EEE NA 2 978-93-90084-05-0 Internet of Things Dr.T.Sasilatha 2020 EEE L ORDIN E NUOVO PUBLIC ATION S 3 978-81-945156-2-3 Basic Electrical and Electronics Engineering Dr.T.Sasilatha 2020 EEE L ORDIN E NUOVO PUBLIC ATION S 4 978-93-5351-024-4 A Review on utilization of drill cutting waste into cement - An Eco - friendly mud disposal J. Sudharsan 2020 Dept. of Petroleum Eng. , AMET NA CRITERION 3 Research, Innovation & Extension KEY INDICATOR 3.4 Research Publications and awards 3.4.6 Number of books and chapters in edited volumes/ Books published and papers published in national/international conference proceedings per teacher
Transcript
Page 1: KEY INDICATOR - ametuniv.ac.in

Books 2019-2020

Sl.

No. ISBN number

Title of the

book/chapters

published/

Title of the paper/

Title of the

proceedings of the

conference/ Name of

the conference Author

Year

of

public

ation

Affiliating

Institute at

the time of

publication

Name of

the

publishe

r

1 978-93-87862-82-1

Load Frequency

Control in

Deregulated Power

System Dr.D.Lakshmi NA EEE NA

2 978-93-90084-05-0 Internet of Things Dr.T.Sasilatha 2020 EEE

L

ORDIN

E

NUOVO

PUBLIC

ATION

S

3 978-81-945156-2-3

Basic Electrical and

Electronics

Engineering Dr.T.Sasilatha 2020 EEE

L

ORDIN

E

NUOVO

PUBLIC

ATION

S

4 978-93-5351-024-4

A Review on

utilization of drill

cutting waste into

cement - An Eco -

friendly mud disposal J. Sudharsan 2020

Dept. of

Petroleum

Eng. ,

AMET NA

CRITERION 3

Research, Innovation & Extension

KEY INDICATOR

3.4 Research Publications and awards

3.4.6 Number of books and chapters in edited volumes/ Books published and papers published in

national/international conference proceedings per teacher

Page 2: KEY INDICATOR - ametuniv.ac.in

Holistic Research

Perspectives Vol. 4

EXIT

Dr. R. Ganesan

Dr. V. Sasirekha

Dr. P. S. Venkateswaran

Dr. R. Parameswari

Page 3: KEY INDICATOR - ametuniv.ac.in

Holistic Research Perspectives

Volume 4] Copyright 2019 by Bonfring

be

All rights reserved. Authorized reprint of the edition published by Bonfring. No part of this book ma. reproduced in any form without the written permission of the publisher. Limits of Liability/Disclaimer of Warranty: The authors are solely responsible for the contents of the nan a s in this volume. The publishers or editors do not take any responsibility for the same in any manner. Errors any, are purely unintentional and readers are required to communicate such errors to the editors or publishers to avoid discrepancies in future. No warranty may be created or extended by sales or promotional materials. The advice and strategies contained herein may not be suitable for every situation. This work is sold with the understanding that the publisher is not engaged in rendering legal, accounting, or other professional services. f professional assistance is required, the services of a competent professional person should be sought. Further, reader should be aware that internet website listed in this work may have changed or disappeared between when this was written and when it is read.

Bonfring also publishes its books in a variety of electronic formats. Some content that appears in print may not be available in electronic books.

I7 89 3 8 7" 86 28 21"

ISBN 978-93-87862-82-1

August 2019

500 Authors

Dr. R. Ganesan

Dr.V. Sasirekha

Dr. P. S. Venkateswaran

Dr. R. Parameswari

Bonfring 309, 2nd Floor,

5h Street Extension, Gandhipuram, Coimbatore-641 012.

Tamilnadu, India.

E-mail: [email protected]

Website: www.bonfring.org

Phone: 0422 4213231

Page 4: KEY INDICATOR - ametuniv.ac.in

Editor Information

Dr. R. Ganesan

Chief Editor

&

Professor & Chairman National Foundation for Entrepreneurship Development (NFED)

Coimbatore, Tamil Nadu

Dr. V. Sasirekha

Editor

&

Professor Sri Sai Ram Institute of Management Studies

Sri Sairam Engineering College Chennai, Tamil Nadu

Dr. P. S. Venkateswaran

Editor

&

Professor

Department of Management Studies

PSNA College of Engineering & Technology

Dindigul, Tamil Nadu

Dr. R. Parameswari Editor

&

Associate Professor

Department of Computer Science

School of Computing Sciences

Vels Institute of Science Technology & Advanced Studies (VISTAS)

Pallavaram, Chennai, Tamil Nadu

Page 5: KEY INDICATOR - ametuniv.ac.in

C.No CHAPTERS & AUTHORS PAGE

NO.

Dreams Decoding: A Gateway to Self-Exploration & 01

Subconscious Healing

K. Ramya

2 Beauty and Brains: An Empirical Understanding the I 22

Brand in Cosmetics Brand Decisions

Dr. G. H. Kerinab Beenu

3 Weapon to Win the War for Talent: Guerilla Recruiting 36

Dr. J. Sathyapriya & Esther Zionia. A.

4 New Dimensions in Literature - Postfeminism & 44

Psychoanalytic Feminism

Dr. S. V. Karthiga & Dr. Soundarya K. R.

5 Retailing Horizon in India - A Conceptual Overview 52

P. Guru

6 3D Bioprinting Potential for Human Healthcare & 63

Personalized Medicines

Dr. Harikrishnan Ramasamy

Performance Improvement in VLSI Adders 16

Dr. A. N. Jayanthi

8 Implementation of High Order Modulation Formats in 88

OM to Compensate Fiber Non-linearity

R. Hema & Dr. S. Lakshmi

9 Workplace Attitude of Employees with Disabilities towards 102

Building Workplace Inclusiveness

Dr. J. Arthi

10 Control Techniques for Improving Quality of Power - A 107

Review

Dr. R. Zahira & Dr. D. Lakshmi

11 Load Frequency Control in Deregulated Power System 124

Dr. D. Lakshmi & Dr. R. Zahira

Page 6: KEY INDICATOR - ametuniv.ac.in

12 Role of Work Environment and Attitude of Employees for 134

Experiencing Occupational Stress in Software Industry in

India - An Empirical Approach

S. Kavitha

13 Impact of Agile Methodology in Digital Transformation- A 145

Conceptual Overview

Suki Ramasamy & Dr. P. Priyadarsini

14 A Study on Chronic Cough Detection using loT and Machine 151

Learning P. Hemalatha & R. Vidhyalakshmi

15 Social Implications of Advertising: A Perceptual Study 161

Dr. V. Sasirekha

16 The Mediating Role of Organizational Commitment in 174

Relationship between Talent Management Practices and

Talent Retention

Dr. Usman Mohideen K. S.

17 Traceability of Manufactured Parts in the Supply Chain 188

Dr. R. Jeyalakshmi & S. Helen Roselin Gracy 18 A Conceptual Review on Present Age Media Audiences with 200

Reference to Psychology & Sociological Perspectives Dr. M. Shanmugathai

19 Classification of Adenomatous Hyperplasia Thyroid Nodules 208

Using the Features Extracted from Ultrasound Images S. Kohila & Dr. G. Sankara Malliga

20 A Study on Service Quality, Customer Satisfaction and 219

Brand Loyalty Towards Non-Vegetarian Hotels

Dr. P. S. Venkateswaran & Ambrin

21 Application of Information System in Educational 228

Institutions in Dindigul District

Dr. S. Manimaran

Page 7: KEY INDICATOR - ametuniv.ac.in

22 Service Quality & Customer Loyalty in Commercial Banks 233

at Dindigul District

Dr. K. Binith Muthukrishnan

242 23 Financial Performance of Selected Nationalized Commercial

Banks

Dr. V. Ravikumar

250 24 A Comparative Study on Quality of Work Life (QWL)

Among Public & Private Hospital Nurses in Coimbatore

E. Felix Claret

258 25 Brain Tumor Classification Using Various Machine Learning

Algorithms A. Vidhya, Dr. R. Parameswari & S. Sathya

271 26 A Holistic Research on Iridology-Based Prediction of

Chronic Diseases

M. Vidhyasree & Dr. R. Parameswari

282 27 Breast Cancer Tumor Categorization using Logistic

Regression, Decision Tree and Random Forest Classification

Techniques Dr. A. Akila & R. Padma

Page 8: KEY INDICATOR - ametuniv.ac.in

Holistic Research Perspectives [Volume 4]

Load Frequency Control in Deregulated Power System

Dr. D. Lakshmi Associate Professor

Department of Electrical & Electronics Engineering Academy of Maritime Education & Training (AMET)

& Dr. R. Zahira

Assistant Professor Department of Electrical & Electronics Engineering

BSA Crescent Institute of Science & Technology

Chennai, Tamil Nadu

Abstract

Load frequency control (LFC) is an important issue in power system operation and

control. This chapter focuses on the view of restructuring the power system. The entities of the same were studied and the types of the same were discussed. The transactions made between Genco and Disco Participation Matrix (DPM) shows Disco in deregulated power system. The modeling of thermal power plant is dealt in detail.

Keywords: Load Frequency Control, Deregulated power system, Independent Service Operator, Disco Participation Matrix, ACE Participation Factor, Contract participation factor.

Introduction

The good quality of power supply requires the maintenance of frequency and voltage within the tolerable limits, i.e. the main objective of power system operation

and control is to provide a balance between the generation and the load. It is for betterment performance of the system and to meet the demand, many areas are interconnected with a tie-line. The load variation in an area affects the remaining areas, which will reflect as variation in frequency (real power), and voltage

(reactive power). The control of the real power is done by Load frequency Control

(LFC) whereas that of the reactive power is by Automatic Voltage Regulator (AVR). In this chapter, as we are considering the real power output of the

generating unit (or frequency). The LFC maintains the desired output frequency and the tie-line power flow. In addition, Vertical Integrated Utility (VIU) has its own generation-transmission-distribution systems that supply power to thee customer. VIU is the sole authority for fixing the price of electric energy. Thus, electrie power

124 DO1: 10.9756/BP2019.1002/11

Page 9: KEY INDICATOR - ametuniv.ac.in

Internet of Thingss

Authors Dr.M.Parameswari, Ms.S.Lincy Jemina

Dr.T.Sasilatha & Dr.A.Suresh

Page 10: KEY INDICATOR - ametuniv.ac.in

INTERNET OF THINGS

Authors

Dr. M. PARAMESWARI | Ms. S. LINCY JEMINA Dr. T. SASILATHA | Dr. A. SURESH

Published by L ORDINE NUOO PUBLICATION

[email protected] www.nuovopublication.com

Page 11: KEY INDICATOR - ametuniv.ac.in

CONTENTTS

Unit Title Page No.

1 Introduction to loT

27 loT Architecture

IlI IOT Protocol 47

IV Building loT with Raspberry PI & 118 Arduino

V Case Studies and Real-World 132 Applications

Page 12: KEY INDICATOR - ametuniv.ac.in

Internet of Things *****

UNIT 1

INTRODUCTION TO IOT

Internet of Things Physical Design- Logical Design- loT

Enabling Technologies loT Levels & Deployment Templates Domain Specific loTs-ToT and M2M IOT

System Management with NETCONF-YANG- loT Platforms Design Methodology

1.1 IoT definition Definition of loT A dynamic global network infrastructure with self-configuring

capabilities based on standard and interoperable communication

protocols where physical and virtual "things" have identities,

physical attributes, and virtual personalities and use intelligent interfaces, and are seamlessly integrated into the information

network, often communicate data associated with users and their

environments

Characteristics of loT

Dynamic & Self-Adapting

.Self-Configuring Interoperable Communication Protocols

Unique Identity Integrated into Information Network

1.2 Physical Design of IoT

The "Things" in loT usually refers to loT devices which have unique identities and can perform remote sensing,

actuating and monitoring capabilities.

loT devices can:

Exchange data with other connected devices and

applications (directly or indirectly), or

Collect data from other devices and process the data locally

and

or

1

Page 13: KEY INDICATOR - ametuniv.ac.in

About the Authors

Dr. M. Parameswari rcccived the B.E degrec in Computer Science and Engineering from S.A.Engincering College. Chcnnai in 2004 She received M.E degrec in Computer Science and Engineering from S.A.Engineering College, Chennai in 2008. She reccived Ph.D degrec in Information and Communication Engineering from Anna

University, Chennai in 2019.She was working in Kings Engineering

College as an Associate Professor in CSE Department. She had a

tcaching cxperience of 15 ycars. She had prescnted national and international conference of totally 22. She had published 16 Journal Papers. She had an

membership of lInternational Association of Engineers, IAENG, 2020. Her areas of

interest include Wircless Sensor Networks. Cloud computing and Networking with

IOT. S. Lincy Jemina received the B.E degree in Computer Science and

Engineering from Kings Engincering College. Chennai in 2018. She

is pursuing M,E degree in Computer Science and Engineering from

VV college of Engincering, Tisaiyanvilai. Her area of interest include

Data mining. Cloud computing, and Bigdata analysis.

Dr. T. Sasilatha is a Professor and Dean in the Department of Electrical and Electronics Engineering in Academy of Maritime Education and Training Deemed to be University, India. She is also the Academic Dean who plays a vital role in design and development of the curriculum and syllabi in the University. She has more than two decades of experience in teaching, research and administration. She has produced Five Ph.Ds in her credit in the area of VLSI Desig.

Wireless Sensor Networks and Biomedical Signal Processing. She has published more than 100 research articles and participated in several research projects.

Dr.A. Suresh obtained his M.E degree from Sathyabama University Chennai in 2005 and Ph.D. degree from Sathyabama University in the year 2012. His area of interest is Induction Heating. He has 20 vears of teaching experience in Engineering College and a member in various social bodies like IET, ISTE and GEPRA. He has published more than 100 papers in the arca of Power Electronics, Power Systems, Network Security and Data Mining. He has published books in the area of

Circuit Theory, Basic Electrical and Electronics Engineering and Power electronics for renewable energy system, Electric drives and Smart grids .He has received Indira

Gandhi Sadbavana Gold Medal award in 2014.He is currently working as a Professor

atAMETdeemed to be University, Chennai, India

ISBN 131008405-

Published by L ORDINE NUOVO PUBLICATION

[email protected] www.nuovopublication.com

Bo tel the b Reuatiorary 97a13 90"084 050"

Page 14: KEY INDICATOR - ametuniv.ac.in

Basic Electrical and Electronics Engineering Authors Dr. A. Suresh, Dr. T. Sasilatha

Dr. T. Baldwin Immanuel & Dr. P. Vinoth Kumar

Page 15: KEY INDICATOR - ametuniv.ac.in

Book Title BASIC

ELECTRICAL AND ELECTRONICS ENGIN EERING

Authors

Dr. A. Suresh

Professor

Department of Marine Engineering

AMET Deemed to be University, Chennai

Dr. T. Sasilatha

Dean

Department of Electrical and Electronics Engineering

AMET Deemed to be University, Chennai

Dr. T. Baldwin Immanuel

Associate Professor

Department of Electrical and Electronics Engineering

AMET Deemed to be University,

Chennai

Dr. P. Vinoth Kumar

Associate Professor

Department of Electrical and Electronics Engineering

Geethanjali Institute of Science and Technology,

Nellore

Book Subject Book Category

Copy Right

Electrical and Electronics

Authored Book

Authors

First Edition

April, 2020

Book Size B5

Paper 21 kg, Maplitho NS

Price 500/ LORDINE NUOVO PUBLICATION

E-mail: [email protected]

www.nuovopublication.com

Published by

Mobile:99442 12131.

SBN SUpported by

Raja Rammohun Roy National Agency for l/SBN, New Delhi-

11O066 (India)

ISBN: 978-93-90084-04-3

ISBN 939008404-0

97893 90'o8 4 043

Page 16: KEY INDICATOR - ametuniv.ac.in

CONTENTS

Page Title No.

Chapter

1 1. Fundamentals of Electricity and De Circuits

71 2 Measuring Instruments

81 3 Electrical Machines

118 4. Semiconductor Devices and Applications

140 Transistors

154 6. Digital Electronics

193 7. Fundamentals of Communication Engineering

Page 17: KEY INDICATOR - ametuniv.ac.in

Basic Electrical and Electronics Engineering

1 Chapter

FUNDAMENTALS OF ELECTRICITY AND DC CIRCUITS

1.1 INTRODUCTION All matters (solid, liquid or gas) are composed of minute particles called molecules, each molecules is

made of atoms. The central part of an atom is called as nucleus. The nucleus contains protons and neutrons. Protons are

positively charged particles while the neutrons have no charge. The outer part of an atom is known as extra- nuclear space and contains only electrons. An electron is negatively charged paricle having negative charge equal to the positive charge on a proton. The electrons move round the nuceus in diferent orbits.

From the above, it is clear that () Every matter is electrical in nature, i.e. it contains electrical particles namely protons and electrons. (i) Under ordinary conditions, a body does not posses any charge because the number of protons is equal to the number of electrons. Therefore, in normal condition, an atom is neutral.

All the electrons in one atom move around its nucleus in diferent orbits. The electrons revolving near the nucleus, i.e. inner orbits, are very tightly bound to the nucleus. The binding force of electrons with the nucleus goes on decreasing if it moves away from the nucleus. So, the electrons in the last orbit are very loosely bound

to the nucleus. These electrons are called valence electrons. In material, these valence electrons are so weakly attached to their nuclei that they can be removed or detached. Such electrons are called free electrons.

The free electrons move at random from one atom to another in material. All electrons in a metal are not free electrons. One atom of a metal can provide at the most one free electron.

If we remove some electrons from a neutral body, there occurs a deficit of electrons in the body. Consequently, it attains a positive charge.

If some electrons are supplied to a neutral body, there occurs an excess of electrons. Consequently, the body attains a negative charge.

From the above, it is clear that whether a given body exhibits electricity (i.e. charge) or not depends upon the relative number of particles of electricity, i.e. protons and neutrons and especially the electrons. This

chapter describes the basic concepts of electric circuits.

1.2.1 Charge The characteristics property of any elementary particles of mater is called charge. Normally, coulomb is

used as the unit of charge. One coulomb of charge is equal to the charge on 6.28 x 1018 electrons. 1 coulomb = Charge on 6.28 x 1018 electrons.

Therefore, if we say that a body has a positive charge of 1 coulomb, it means that it has a deficit of 6.28 x 1018 electrons. The symbol for the charge is Q or q.

Dr. A. Suresh, Dr. T. Sasilatha, Dr. T. Baldwin Immanuel& Dr. P. Vinoth Kumar

Page 18: KEY INDICATOR - ametuniv.ac.in
Page 19: KEY INDICATOR - ametuniv.ac.in

ACCREDITED WITH ‘A’ GRADE BY NAAC

Celebrating 90th Anniversary

(1929 - 2019)

PROCEEDINGS

2nd NATIONAL CONFERENCE

On INDUSTRIAL POLLUTION AND CONTROL TECHNOLOGY

[IPACT – 2019] March 13th and 14th, 2019

Organized By

Department of Chemical Engineering

Faculty of Engineering and Technology

Annamalai University

Annamalai Nagar – 608 002

Tamil Nadu

Funded By

Science and Engineering Research Board

Department of Science and Technology

(SERB-DST) Government of India

New Delhi

IPACT – 2019 SHARING THE KNOWLEDGE TO SAVE THE NATION

Page 20: KEY INDICATOR - ametuniv.ac.in

Book Title : Proceedings – 2nd National Conference on

Industrial Pollution And Control Technology – 2019

[IPACT – 2019]

Editor : Dr. S. Dhanasekaran

Staff ID No: 05468

Coordinator – IPACT-2019

Department of Chemical Engineering

Faculty of Engineering and Technology

Annamalai University

Annamalai Nagar – 608 002,

Tamil Nadu, India

Phone : 04144 239737

Fax : 04144 239737

Mobile : 994 262 6198

Mail : [email protected]

Associate Editor : Dr. B. Sivaprakash

Staff ID No: 08134

Coordinator – IPACT-2019

Department of Chemical Engineering

Faculty of Engineering and Technology

Annamalai University

Annamalai Nagar – 608 002,

Tamil Nadu, India

ISBN : 978-93-5351-024-4

Published by : Department of Chemical Engineering

Faculty of Engineering and Technology

Annamalai University

Annamalai Nagar – 608 002,

Tamil Nadu,

India

Publishing Year : 2019 [13th of March, 2019]

Printed By : Caprice Digital Printers

52F, Shivapuri Road

Annamalai Nagar – 608 002

Cuddalore District

Tamil Nadu

India

Price : Not For Sale

Page 21: KEY INDICATOR - ametuniv.ac.in

IPACT – 2019

CONTENTS

S. No. Paper ID Name Paper Title Page

No

1. BT 001 ARUL MANIKANDAN N

IIT Guwahati

CERATONIA SILIQUA PODS AS A NOVEL FEEDSTOCK

FOR SUSTAINABLE POLYHYDROXYBUTYRATE (PHB)

PRODUCTION

1

2. BT 002 SURESH B

Annamalai University

OPTIMIZATION AND KINETICS OF PECTINASE

PRODUCTION FROM AGRO-INDUSTRIAL RESIDUES

USING ASPERGILLUS FUMIGATUS BY SOLID-STATE

FERMENTATION

5

3. BT 003 RISWAN ALI S B

RAMESH S

Annamalai University

STATISTICAL OPTIMIZATION OF XYLANASE

PRODUCTION UNDER SUBMERGED FERMENTATION

USING RESPONSE SURFACE METHODOLOGY

1

4. BT 004 RATHAKRISHHNAN P

Annamalai University

OPTIMIZATION OF PROCESS PARAMETERS FOR

PROTEASE PRODUCTION USING AGRO WASTE FROM

B.LICHENIFORMIS USING RESPONSE SURFACE MODEL

9

5. BT 005 SUBHAGAR S

SUDHAKAR P

Annamalai University

OPTIMIZATION AND PRODUCTION OF LOVASTATIN

BY CO-CULTURE SOLID STATE FERMENTATION

FROM ORGANIC RESIDUES

15

6. BT 006 DEVANESAN M G

Annamalai University

SEQUENTIAL OPTIMIZATION OF JATROPHA AND

KARANJA OILS TRANSESTERIFICATION USING

IMMOBILIZED BIOCATALYST IN N-HEXANE MEDIUM

17

7. BT 007 SIVAGURUNATHAN P

Annamalai University

EFFECT OF FERMENTATION PARAMETERS ON

LACTIC ACID PRODUCTION USING CASHEW APPLE

JUICE AS SUBSTRATE

2

8. BT 008 UMA C

Annamalai University

CIYRIC ACID PRODUCRION FROM FRUIT WASTE

SAMPLES

2

9. BT 009 MANIKANDAN K

Annamalai University

STATISTICAL MEDIUM OPTIMIZATION STUDIES IN

INDUSTRIAL ETHANOL PRODUCTION FROM WASTE

CORN FLOUR BY SSF PROCESS IN BATCH

FERMENTATION

22

10. BT 010 PALANIRAJ R

Annamalai University

OPTIMIZATION OF NUTRIENTS FOR THE

PRODUCTION OF LACTIC ACID LACTOBACILLUS

DELBRUECKII USING AGROWASTE SUBSTRATE

25

11. BT 011 MANIKKANDAN T R

VASANTHAKUMAR T

Annamalai University

OPTIMIZATION OF CARBON SOURCE FOR HYDROGEN

PRODUCTION BY BACILLIUS LICHENIFORMIS

30

12. BT 012 HARICHANDANA DASARI

CHALLA SRAVANI

CHARLES DAVID

Vignan’s Foundation for

Science, Technology and

Research, Andhra Pradesh

PROSPECTS OF AN INTEGRATED

PHYTOREMEDIATION-HYDROPONICS SYSTEM FOR

DOMESTIC GREY WATER REMEDIATION USING

CANNA INDICAPLANT SPECIES

3

13. BT 013 KARTHIKEYAN M

AMET University, Chennai

CASSIA JAVANICA BIODIESEL BLENDS WITH SIO2

NANO ADDITIVES FOR IC ENGINE APPLICATIONS

32

14. BT 014 DILIPKUMAR M

Annamalai University

ENHANCED INULINASE PRODUCTION:

OPTIMIZATION BY RESPONSE SURFACE

METHODOLOGY

3

15. BT 015 MUTHU K

SELVI V

ICT Taramani, Chennai

STUDIES ON STATISTICAL OPTIMIZATION OF

PROCESS PARAMETERS FOR THE PRODUCTION OF

BIODIESEL USING FRESH PALM OIL AND WASTE

COOKING PALM OIL

37

Page 22: KEY INDICATOR - ametuniv.ac.in

16. BT 017 SHALAGHA SHARMA

Shobhit Deemed University,

Uttar Pradesh

EFFECT OF BIOLOGICAL ACTIVE MOLECULES OF

CALOTROPIS GIGANTEA AGAINST E. COLI

47

17. BT 018 ASHOKKUMAR S

VELMURUGAN J

Annamalai University

BIOLOGICAL TREATMENT OF POLLUTED AIR

CONTAINING MEK USING CORN STACK AND

PRESSMUD AS PACKING MATERIALS

4

18 BT 019 DHINAGARAN R*

Kongu Engineering College,

Perundurai

PRODUCTION OF BIOPLASTICS FROM WASTE

NEWSPAPER

4

19. BT 020 CHARMI HUMBAL

Annamalai University

LEVELS OF CULTURABLE BACTERIA IN AMBIENT AIR

OF RAJKOT CITY: A TYPICAL URBAN AREA

49

20. BT 021 RAMESH T

Marwadi University,

Gujarat

SCREENING AND OPTIMIZATION OF LACCASE FROM

A MARINE FUNGAL ISOLATE: TRICHODERMA SPECIES

55

21. BT 022 JAYABALAN K

Annamalai University

OPTIMIZATIONS OF INGREDIENTS FOR SENSORY

EVALUATION OF YOGURT WITH BANANA STEM

POWDER USING RESPONSE SURFACE METHODOLOGY

59

22. BT 023 REVATHI K

ICT Taramani, Chennai

PROCESS PARAMETER OPTIMISATION STUDY OF

KERATINASE ENZYME USING RESPONSE SURFACE

METHODOLOGY

68

23 EE 001 MOHAMMED K

Vel Tech University,

Chennai

EXPERIMENTAL INVESTIGATION OF GARNET SAND

ON CONCRETE

74

24 EE 002 JEYA R

DINESHKUMAR S

Annamalai University

IMPACT OF CLIMATE CHANGE IN COTTON

CULTIVATION

77

25 EE 003 RAJARAJAN C

Annamalai University

A MECHANICAL AND METALLURGICAL BEHAVIOR OF

ECO-FRIENDLY LINEAR FRICTION WELDED

ALUMINIUM ALLOY JOINTS FOR AEROSPACE

APPLICATION

79

26 EE 004 SIVARAJ P

Annamalai University

EFFECT OF POST WELD HEAT TREATMENT ON

FRACTURE TOUGHNESS PROPERTIES OF ECO-

FRIENDLY FRICTION STIR WELDED AA7075-T651

ALUMINIUM ALLOY JOINTS

82

27 EE 005 SHIVUBHA SUMANIYA

SAGAR BHATT

Marwadi University,

Gujarat

EXTRACTION OF NICOTINE FROM TOBACCO 87

28 EE 006 JAYAVEL K

Vivekananda College of

Engineering for Women,

Namakkal

BIOSORPTION OF HEAVY METALS AND ISOLATION

OF AMYLASE ENZYME USING PSEUDOMONAS SPECIES

74

29 EE 007 RAJAMEGALA N

Vivekananda College of

Engineering for Women,

Namakkal

OPTIMIZATION AND REMOVAL OF HEXAVALENT

CHROMIUM FROM INDUSTRIAL EFFLUENT USING

FUNGAL SPECIES

75

30 EE 008 MOHAN SK

The Kavery college of

Engineering, Salam

OPTIMIZATION AND PRODUCTION OF BIOPLASTICS

USING BANANA PEEL AND SUGAR CANE

75

31 EE 009 ANKITA S, Delhi

Technological University

IN VITRO FUNGICIDAL ACTIVITIES OF FORCON

CANDID AND NORFLOX ANTIBIOTICS

AGAINST FUSARIUM SPP

89

Page 23: KEY INDICATOR - ametuniv.ac.in

32 EE 010 SUNDARAPANDIYAN M

DIVYA BHARATHI T

Periyar Maniammai

Institute of Science and

Technology, Thanjavur

PHYSICO-CHEMICAL CHARACTERISTICS OF LEATHER

TANNERY EFFLUENT

76

33 EE 011 ARUNA C

ASHA B

Annamalai University

INVESTIGATION ON AN ANAEROBIC MIGRATING

BLANKET REACTOR DURING START-UP USING

INSTITUTIONAL WASTEWATER

76

34 EP 001 PRAVEEN SAMPATH KUMAR

C

Annamalai University

CAUSES AND EFFECTS OF ENVIRONMENTAL

POLLUTION

98

35 EP 002 DARLING B SUJI

Annamalai University

INDIA’S RESPONSE TO ENVIRONMENTAL CRISIS

101

36 EP 003 VIJAYAN P

Annamalai University

ENVIRONMENTAL POLLUTION STUDIES ON

INDUSTRIAL EFFLUENTS WATER, RIVER CAUVERY,

METTUR SALEM DISTRICT TAMIL NADU

94

37 EP 004 ILAVALAGAN P

Academy of Maritime

Education and Training,

Chennai

A REVIEW AND MITIGATION PROCESSES TO PLASTIC

POLLUTION

94

38 EP 005 KRISHNAPRABU S

RANJITHKUMAR D

Annamalai University

BIODIVERSITY CONSERVATION TECHNIQUES AND

THREATS

95

39 EP 006 ARITH A, BALAJI A and

PRAVEEN E, Adhiyamaan

College of Engineering,

Hosur

CHEMO-CATALYZED PROCESS OF ENHANCED FAT

OIL EXTRACTION FROM CHICKEN WASTE

95

40 EP 007 SUPRIYA MANTRI

KRISHNAPRASAD

UPADHYA B

SAMIR MESHRAM

IIP Mumbai

BIODEGRADABILITY STUDIES ON ECO-FRIENDLY

PLASTIC FILMS

104

41 EP008 SIDHAR S, KONGU

ENGINEERING COLLEGE,

Perundurai

STUDIES ON NO2 ABSORPTION IN PACKED COLUMN

96

42 EP009 SARAVANAN A

HINDUSTAN INSTITUTE OF

SCIENCE AND

TECHNOLOGY

PRODUCTION OF BIOGAS FROM PHARMA WASTE

96

43 EP010 RAJAKRISHNAMOORTHY P

Annamalai University

SI ENGINES EMISSION REDUCTION USING ZEOLITE

AS CATALYST SYNTHESIZED FROM COAL FLY ASH

97

44 EP011 ARUNACHALAM E

SRINIVASAN K

Annamalai University

ESTIMATION OF GROUNDWATER RECHARGE IN

VEERANAM COMMAND AREA CUDDALORE DISTRICT

TAMILNADU

107

45 EP012 SAI ACHUTH M

Anna University, Chennai

PRODUCTION OF SUCCINIC ACID USING

PHANEROCHAETE CHRYSOSPORIUM MTCC787 WITH

CHLOROFORM AS SUBSTRATE

97

46 IET 001 RENGADURAI S

Annamalai University

KINETICS STUDIES ON BIO DECOLORISATION OF

SYNTHETIC TEXTILE DYES

117

47 IET 002 RAJESH KANNAN R

SUNDAR B

Annamalai University

APPLICATION OF STATISTICAL DESIGN FOR THE

REMOVAL OF DYE USING MARINE ALGAE

120

48 IET 003 BALAMURUGAN P

MUTHAMILSELVI P

SARAVANAN V

Annamalai University

EFFECT OF PROCESS PARAMETER ON PHENOL

DEGRADATION- KINETICS AND MODELING

110

Page 24: KEY INDICATOR - ametuniv.ac.in

49 IET 004 JAYAKUMAR R

Annamalai University

OPTIMIZATION STUDIES ON SORPTION OF CU (II)

REMOVAL FROM AQUEOUS SOLUTION USING

MARINE BROWN ALGAE SARGASSUM WHITII

126

50 IET 005 BALAJI K

Anna University, Panruti

COMPARATIVE STUDY ON EVALUATION OF

DECOLOURISATION AND BIODEGRADATION OF

SYNTHETIC TEXTILE EFFLUENT USING WHITE ROT

FUNGAL (WRF) SPECIES

110

51 IET 006 VIJAYALAKSHMI K

Srinivasa Subbaraya

Government Polytechnic

College, Puttur

ARTIFICIAL NEURAL NETWORK (ANN)

PROPAGATION MODEL FOR TREATMENT OF

DISTILLERY WASTEWATER BY ELECTRO

COAGULATION METHOD

111

52 IET 007 RAVICHANDRAN P

Annamalai University

COMPARATIVE STUDY ON DIFFERENT PACKING

MEDIA IN HYBRID ANAEROBIC REACTOR TREATING

DAIRY WASTEWATER

111

53 IET008 MANOHAR PINNIKA

ALEKHYAVOGGU

CHARLES DAVID

Vignan’s Foundation for

Science, Technology and

Research, Andhra Pradesh

PERFORMANCE ANALYSIS OF NANO-ZNO COATED

COMPACT DISC AGITATOR REACTOR FOR THE

DEGRADATION OF TEXTILE DYES

112

54 IET009 KARTHICK YALAMARTHY

RISHI MALLISETTY

CHARLES DAVID

Vignan’s Foundation for

Science, Technology and

Research, Andhra Pradesh

PERFORMANCE EVALUATION OF ZNO NANO

PARTICLE SYNTHESIZED FROM MORINGA OLEIFERA

RESIN FOR DYE DEGRADATION

112

55 IET010 KAMALANATHAN G

Annamalai University

OXIDATION OF ACID BLUE 15 THROUGH

ELECTROCHEMICAL OXIDATION BY USING DSA

ANODE AND ROTATING CATHODE IN ELECTRO-

CHEMICAL REACTOR

131

56 IET011 AYNUL RIFAYA M

CHITHRA DEVI S

ESTHER A and GAYATRI M

P.S.R Engineering college,

Sivakasi

INDUSTRIAL WASTE WATER TREATMENT USING

AZADIRACHTA INDICA PLANT LEAVES

113

57 IET012 BABU E

Tamil Nadu government

Polytechnic, Madurai

PACKED BED COLUMN STUDIES FOR THE SORPTION

OF NI(II) BY IMMOBILIZED MIXED BIOSORBENT :

KINETIC MODELLING

135

58 IET013 GOMATHI E

BIT campus, Trichy

ELECTROCHEMICAL DECOLOURISATION AND

DEGRADATION OF METHYLENE BLUE DYE USING AN

ELECTRO FENTON (EF) PROCESS

113

59 IET014 SAMPATHKUMAR G

The Kavery College of

Engineering, Mecheri,

Salem

PHOTO CATALYTIC DEGRADATION OF REACTIVE

BLUE DYE BY USING ZINC OXIDE NANO PARTICLE

114

60 IET015 ARAVAINTH KUMAR A

BHAVATHARANI B

GOWSALYA S

Kongu Engineering College

Perundurai

STUDIES ON REUSABILITY OF REVERSE OSMOSIS

REJECT IN TEXTILE DYING PROCESS

114

61 IET016 DIVYA NANDHINI R

ELAYANILA K

KEERTHANA V

Kongu Engineering College

Perundurai

STUDIES ON WASTEWATER TREATMENT USING

IRON OXIDE - CLAY COMPOSITES

115

Page 25: KEY INDICATOR - ametuniv.ac.in

62 IET017 KARAN CHABHADIYA

Marwadi Education

Foundation of Group of

Institution, Gujarat

PHYSICAL, CHEMICAL, BIOLOGICAL

CHARACTERIZATION OF SOIL AND GROUND WATER

AFFECTED BY TEXTILE EFFLUENT AT

JETPUR,GUJARAT

141

63 IET018 GEETHA M

Kongu Engineering College,

Perundurai

COMPARATIVE STUDIES ON REMOVAL OF DYE FROM

AQUEOUS SOLUTIONS BY ACTIVATED CARBON FROM

GLORIOSA SUPERBA PERICARP

115

64 IET019 ARAVINDH BABU R S

KAVIN M

DHARANI SRI B

Kongu Engineering College

Perundurai

HYBRID PROCESS ON TREATMENT OF TANNERY

EFFLUENT USING CONSTRUCTED WETLAND

116

65 IET020 ANHURADHA S

ARRIVUKKARASAN S

Annamalai University

BIODEGRADATION OF DISTILLERY INDUSTRIAL

EFFLUENT WITH ORGANIC LOAD USING CHITOSAN

AS AN ADSORBENT

145

66 IET021 JEEVABHARATHI S

KRISHNAPRABU S

Annamalai University

EFFECT OF NANOTECHNOLOGY IN THE

SUSTAINABLE AGRICULTURE

116

67 IET022 ASHA B

SHEELA R

VALARSELVI G

Annamalai University

START-UP PROCESS OF AN UP-FLOW ANAEROBIC

SLUDGE FIXED FILM REACTOR FOR TREATING SAGO

WASTEWATER

149

68 SWM001 SUJITHRA S

MANIKKANDAN T R

VASANTHAKUMAR T

Annamalai University

REVIEW ON FRUIT AND VEGETABLE

WASTEMANAGEMENT

152

69 SWM002 J. SUDHARSAN

Academy of Maritime

Education and Training

Deemed to be University,

Chennai

A REVIEW ON UTILIZATION OF DRILL CUTTINGS

WASTE INTO CEMENT – AN ECO-FRIENDLY MUD

DISPOSAL

156

70 SWM003 ARTI THANKI

Marwadi University,

Gujarat

ASSESSMENT OF DISPERSION, RETENTION TIME AND

FRACTION OF PM10-20, AND PM0.23-1 IN IRON ORE

MINES

158

71 SWM004 THANKI ANKITA

Marwadi University,

Gujarat

ASSESSMENT OF VARIATION OF PARTICULATE

MATTER CONCENTRATION INSIDE AN OPENCAST

COPPER MINE

161

72 SWM005 RAMYA B

KAUSALYA S

Sree Sastha Institute of

Engineering and

Technology

BIO-ENERGY PRODUCTION FROM SOLID WASTE

152

73 SWM006 ALKESHA NAIK

Marwadi Group of

Institutions, Gujarat

CARBON SEQUESTRATION POTENTIAL OF NOVEL

COMPOSITE MATERIAL FOR MORTAR PREPARATION

USING FLY ASH REINFORCED WITH PLANT FIBRES

165

74 SWM007 CARL MAX S

ARUNISH S V

KASAVAPRASATH M A

Kongu Engineering College,

Perundurai

PRODUCTION OF THERMAL INSULATING BRICKS

USING COWDUNG AND PLASTIC

153

75 SWM008 SARAVANAN P

BIT Campus, Trichy

BIO-CATALYSIS OF MANGO INDUSTRIAL WASTE BY

TRICHODERMA REESEI FOR CELLULASE

PRODUCTION

153

76 SWM009 VIMALSHANMUGAM K

Tamil Nadu Government

Polytechnic, Madurai

OPTIMIZATION OF PROCESS PARAMETERS FOR

XYLANASE ENZYME PRODUCTION USING AGRO-

INDUSTRIAL WASTES BY SSF

154

Page 26: KEY INDICATOR - ametuniv.ac.in

77 SWM010 HARITHA S R

CHANDRACHOODAN K

DRAVID M K

Kongu Engineering College,

Perundurai

BIODEGRADABLE PLASTICS FROM MIXED STARCH

154

78 SWM011 PRAVEEN KUMAR J

VIJAYAGOPAL V

KAVITHA S

SURENDRAN G

JCT College of Engineering

and Technology

EXTRACTION OF PHENOL FROM WASTE

VEGETABLES AND OPTIMIZATION USING MULTIPLE

SOLVENT EXTRACTION

155

79 SWM012 GANESH P

Annamalai University

BIO-ENERGY PRODUCTION USING BIOLOGICAL

WASTES

169

80 SWM013 KRISHNAPRABHU S

JEEVABHARATHI

Annamalai University

GREEN OR CLEAN TECHNOLOGY FOR SUSTAINABLE

ENVIRONMENT

155

81 A 001 KALAIYARASAN C

Annamalai University

INFLUENCE OF INTEGRATED NUTRIENT AND WEED

MANAGEMENT ON WEEDS, GROWTH AND YIELD,

QUALITY AND NUTRIENT UPTAKE OF SUNFLOWER

174

82 A002 JAIGANESH V

Annamalai University

STUDIES ON THE USE OF PLANT ACTIVATOR AND

SILICON FERTILIZER FOR THE MANAGEMENT OF

SHEATH BLIGHT OF RICE WITHOUT DISTURBING

THE SOIL BIOTA

179

83 A 003 GAYATHIRI M

Annamalai University

INFLUENCE OF INTEGRATED NUTRIENT

MANAGEMENT ON YIELD PARAMETERS OF GLORY

LILY

184

84 A 004 NATARAJAN M

Annamalai University

MANAGEMENT OF CLIMATICAL EXTREMES WITH

CONCENTRATE ON FLOODS AND DROUGHTS IN

AGRICULTURE SECTOR AMONG THE RURAL AREAS

IN KALLAKURICHI DISTRICT-A CASE STUDY

173

85 A 005 UMA MAHESWARI

Annamalai University T

SEED BED SOLARIZATION AS A COMPONENT OF

INTEGRATED PEST AND DISEASE MANAGEMENT IN

CHILLI NURSERY

186

86 A 006 RAMESH S

JAYARAJ M

Annamalai University

EFFECT OF PRESSMUD COMPOST (SUGAR INDUSTRY

WASTE) ON GROWTH, SEED YIELD AND POST

HARVEST SOIL NUTRIENT STATUS IN SUN FLOWER

(HELIANTHUS ANNUUS L)

189

87 A 007 JAYA CHITRA J

Annamalai University

PHYSICO CHEMICAL ANALYSIS OF TEXTILE

EFFLUENT AND DECOLORIZATION OF TEXTILE DYE

BY BACILLUS SP AND PSEUDOMONAS SPP

191

88 A 008 KALIDASAN T

Annamalai University

GREEN HOUSE PURSURANCE AND GLOBAL

WARMING

173

89 C 001 THIRUNARAYANAN G

Annamalai University

ARULKUMARAN R

Government Arts College,

C-Mutlur

MANIKANDAN V

Thiruvalluvar Arts and

Science College, Kurinjipadi

ULTRASOUND ASSISTED SYNTHESIS OF 3-(9H-

FLUOREN-2-YL)-5-(SUBSTITUTED PHENYL)

ISOXAZOLES

194

Page 27: KEY INDICATOR - ametuniv.ac.in

90 CE 001 MOHAMED IBRAHIM M K

MOHAMMED IRFAN S R

PERARASAN K

Kongu Engineering College

Perundurai

IMPROVISED AND ENERGY EFFICIENT TECHNIQUE

FOR MIXING OF NON-NEWTONIAN FLUIDS USING

STATIC MIXERS

197

91 CE 002 SURIYAPRAKASH M

Annamalai University

CURCUMIN – ITS EFFECT ON HUMAN HEALTH

197

92 CE 003 GOWSALYA S

GOWRISANKAR S S

GOWRI T

Kongu Engineering College

Perundurai

HEAT TRANSFER STUDIES IN SPIRAL TUBE HEAT

EXCHANGER USING HYBRID NANOFLUIDS

198

93 CE 004 MEERA KERALIYA

Marwadi University,

Gujarat

ASSESSMENT OF FINE PARTICLE PROFILE IN

SURFACE MINE USING AN ARTIFICIAL NEURAL

NETWORK MODEL

206

94 CE 005 KOHILA M, KAAVYA R

MALINI D and KARAN

PRASATH S

Kongu Engineering College

Perundurai

STUDIES OF CHEMICAL PRECIPITATING AGENTS

MAGNESIUM AND CALCIUM OXIDE IN REMOVAL OF

CHROMIUM FROM CHROME TAN LIQUOR

198

95 CE 006 NISARG MEHTA

Marwadi University,

Gujarat

CLEANER PRODUCTION ASSESSMENT FOR A FISH

PROCESSING INDUSTRY, GUJARAT – A CASE STUDY

211

96 CE 007 SANTHI MAHESWARI K

SARANYA E

NISHVANRAJ S

Kongu Engineering College

Perundurai

REMOVAL OF PESTICIDES FROM WATER

USING PHOTOCATALYSIS

199

97 CE 008 HAJA SUHAIL M R

ALAGAPPAN P L

CHANDRU R

Kongu Engineering College

Perundurai

PULSATING GAS JET MIXER

199

98 CE 009 PRABHU C, VINITH R and

SHREERAM V, Kongu

Engineering College

Perundurai

AGITATED VESSEL COOLER FOR NON-VOLATILE

LIQUIDS

200

99 CE 010 SUNDARAVALLI A

Kongu Engineering College

Perundurai

A FOUR-WAY CATALYTIC SYSTEM FOR CONTROL OF

EMISSIONS FROM DIESEL ENGINE

200

100 CE 011 SUGASHINI M

Kongu Engineering College

Perundurai

HEAT TRANSFER STUDIES OF AZEOTROPE MIXTURE

ON COMPACT HEAT EXCHANGER

201

101 CE 012 ASHWIN M L,

HARIHARAN R

KARTHIKEYAN A

Kongu Engineering College

Perundurai

ENHANCING HEAT TRANSFER COEFFICIENT USING

CUO NANOPARTICLES IN CHANNELED HEAT

EXCHANGER

201

102 CE 013 ARAVIND T

ARAVIND V

LOGESH K

Kongu Engineering College

Perundurai

HEAT TRANSFER STUDIES IN A HYBRID HEAT

EXCHANGER USING NANO PARTICLES

202

Page 28: KEY INDICATOR - ametuniv.ac.in

103 CE 014 SIVARAM K,

YOGESWARAN D

PAHALAVAN G

Kongu Engineering College

Perundurai

EXTRACTION OF NATURAL DYES

202

104 CE 015 KARTHIKEYAN S

BALAJI MANIKANDAN V

ANBARASAN G

Kongu Engineering College

Perundurai

EXPERIMENTAL STUDIES OF FLOW PARAMETERS ON

OPTIMIZING THE MIXING TIME IN JET MIXER

203

105 CE 016 VIHASHINEE ELANGO

RUBIGA ANBU

Bannari Amman Institute of

Technology,

Sathyamangalam

CANCER CHEMO PREVENTIVE ACTIVITY OF

PHASEOLUS VULGARIS AN INVITRO APPROACH

203

106 CE 017 SATHYAPRIYA D

RASIKAA R V

Bannari Amman Institute of

Technology,

Sathyamangalam

EXTRACTION AND CHARACTERIZATION OF HYDROXY

CITRIC ACID FROM GARCINIA COMBOGIA

CULTIVATED AT TWO DIFFERENT LOCATIONS OF

MALABAR AND SRILANKA

204

107 CE 018 SIVAPRAKASH B

PONSUMITHAPATTU S

Annamalai University

PREDICTION OF STABLE OPERATING CONDITIONS IN

A CHEMOSTAT FOR COMPETITIVE TYPE

INTERACTION BETWEEN TWO MICROORGANISMS

WITH ANDREW'S GROWTH MODEL

214

108 CE 019 DINESHKUMAR R

Annamalai University

UNDERSTANDING THE HOST SPECIFICITY OF

MAGNAPORTHE SPECIES INFECTING DIFFERENT

CEREAL HOSTS

204

109 CE 020 RUCHI UPADHYAY

Marwadi Education

Foundation’s Group of

Institutions, Gujarat

EFFECT OF ORGANIC MANURING ON

CARBONSEQUESTRATION AND MICROBIAL

DIVERSITYIN RICE SOIL

219

110 CE 021 VENGATESAN D

Annamalai University

FACTORS AFFECTING FARM WOMEN IN THE

ADOPTION OF ENVIRONMENTAL FRIENDLY

AGRICULTURAL TECHNOLOGIES

221

111 CE 022 RAVISANKAR N

EZHISAIVALLABI K

Annamalai University

IMPACT ASSESSMENT STUDY OF AQUACULTURE

USING GIS IN NAGAPATTINAM DISTRICT, TAMIL

NADU STATE

223

112 CE 023 MAGESH A

Annamalai University

VITAMIN C STABILITY IN GUAVA, GRAPES, ORANGE,

SAPOTA UNDER DIFFERENT STORAGE CONDITIONS

USING DIFFERENT LEVELS OF SODIUM BENZOATE

226

113 CE 024 VIMALA B

MOHANKUMAR S

Annamalai University

SUSTAINABLE WATER MANAGEMENT – A REVIEW

229

114 CE 025 MOHAMMED ASHIKALI J

Srinivasa Subraya

Polytechnic College, Puttur

KINETIC MODELS FOR THE GENERATION OF BIOGAS

FROM MUNICIPAL SOLID WASTE USING DIFFERENT

INOCULUM

231

115 CE 026 RAMESH P

Annamalai University

SOLID WASTE MANAGEMENT THROUGH BIOGAS

PRODUCTION

205

116 CE 027 JEEVABHARATHI S

KRISHNAPRABHU S

Annamalai University

RECENT TRENDS IN AGRICULTURAL

BIOTECHNOLOGY

205

117 CE 0028 SURESH B

Annamalai University

OPTIMIZATION AND KINECTICS OF

POLYGALACTURONASE PRODUCTION FROM AGRO-

INDUSTRIAL RESIDUES USING ASPERGILLUS NIGER

BY SOLID-STATE FERMENTATION

236

Page 29: KEY INDICATOR - ametuniv.ac.in

118 CE 029 RAMSENTHIL R

DHANASEKARAN S

Annamalai University

DYNAMIC STUDIES IN A DOUBLE PIPE HEAT

EXCHANGER WITH MOTIONLESS MIXERS

240

119 CE 030 ASHWINI SACHINDRAN

SANJANA SHEKAR

SRIDAR SANDEEP

VARSHITA ANAND

Ramaiah Institute of

Technology, Bangalore –

560054, Karnataka, India

BIOSORPTION OF LEAD IONS USING SUGARCANE

BAGASSE: ISOTHERM AND KINETIC STUDIES

244

120 P 001 PAZHANIVELV

Annamalai University

COMPATABILITY STUDIES OF LISINOPRIL WITH

SELECTED EXCIPIENTS FOR AN ORAL

DISINTEGRATING FILM FORMULATION

247

121 P002 SWAMIVELMANICKAM M

SURESH R

Annamalai University

PREPARATION AND EVALUATION OF TRANSDERMAL

DRUG DELIVERY SYSTEM FOR NAPROXEN SODIUM

249

122 P 003 SURESH R

SWAMIVELMANICKAM M

Annamalai University

PHARMACEUTICAL POLLUTION PREVENTION AND

MANAGEMENT-A CRITICAL REVIEW

252

123 P 004 KATHIRESAN K

PANDIAN P

Annamalai University

PHARMACEUTICALS: ECOLOGICAL EFFECTS,

CONTAMINATION AND BROOD HEALTH

256

124 P 005 SIVAKRISHNAN S

PRADEEPRAJ D

Annamalai University

EVALUATION OF DRUG EXCIPIENT COMPATIBILITY

FOR LOXOPROFEN SODIUM USING FOURIER

TRANSFORM INFRARED (FT-IR) AND DIFFERENTIAL

SCANNING COLORIMETRY (DSC)

247

125 P 005 VENKATESAN P

Annamalai University

PHYTOCHEMICAL EVALUATION OF ETHANOLIC

EXTRACT OF LEAVES OF CORDIA OBLIQUA WILLD

259

126 P 007 JAYANTHI B

Annamalai University

VALIDATION OF PREDICTED OPTIMIZED EXTENDED

RELEASE ACECLOFENAC MICROPARTICLE

FORMULATIONS

262

127 P008 KILIMOZHI D

Annamalai University

POLLUTION OF PHARMACEUTICALS IN

ENVIRONMENT AND CONTROL METHODS - A

REVIEW

267

128 P009 RANI S

Annamalai University

A DETAILED REVIEW ON POLLUTION CONTROL IN

PHARMACEUTICAL INDUSTRY

248

129 P010 KRUTHI H B, SHREYA H

and DIVYA MISHRA, M.S.

Ramaiah Institute of

Technology, Bengaluru

PINE WOOD GASIFICATION BASED ON

THERMODYNAMIC EQUILIBRIUM MODEL USING

ASPEN PLUS

270

130 P011 SRIRAAMAN M

Annamalai University

REDUCING LOGISTICS POLLUTION AND

OVERCOMING CHALLENGES IN E-COMMERCE BY

RESTRICTING IT WITHIN EACH LOCAL BOUNDARY

274

131 P012 VIGNESH D

JAYASEELAN S

Annamalai University

INCREASING EFFICIENCY OF PHOTOVOLTAIC CELLS

USING THERMAL EMITTERS (THERMO

PHOTOVOLTAICS) AND PARABOLIC REFLECTORS

248

Page 30: KEY INDICATOR - ametuniv.ac.in

IPACT-2019 – SWM – 002; ISBN 978-93-5351-024-4

2nd

National Conference on Industrial Pollution And Control Technology – 2019 Funded by SERB-DST 156

PROCEEDINGS SOLID WASTE MANAGEMENT

A REVIEW ON UTILIZATION OF DRILL CUTTINGS WASTE INTO

CEMENT – AN ECO-FRIENDLY MUD DISPOSAL

SUDHARSAN J* Department of petroleum Engineering, Academy of Maritime Education and

Training [AMET] Deemed to be University, Chennai, Tamilnadu, India:

[email protected]

ABSTRACT

Disposal of drilling fluid is highly toxic to the environment as well as all living organisms in the world especially this becomes

major problem in the offshore organisms. Disposal of drilling fluids to the non-living area is also leading to the environmental issues not

with immediate effect. But it’s sure that it will contaminate soil and atmosphere. So producing cements from the drill cuttings waste will

be considerable idea which shows high strength compare to Portland cement yield. The paper discusses the cement manufacturing from

drilling fluids waste and its benefits rather than its disposal concerns.

Keywords Drilling Fluid, Eco Concern, Cement, Blast Furnace Slag, Rheology

INTRODUCTION

Drilling in petroleum industry without drilling fluid

is impossible. The drilling mud maybe water based or oil based

which consists of many additives and each plays an unique

role in the drilling operations. The additives of drilling fluid is

bringing greatness in successful drilling operation while it's

disposal is a major issue as per Environmental regulations.

Because it's not only toxic to living organisms and it also spoils

the yield and density of plants gradually. A study states that a

successful drilling provides the drilling waste to the

environment in the range of 1000 to 3000 ppm and which also

spreads to its surroundings almost 2,100 m. When human

beings or animals inhale its toxicity continuously this may

damage the respiratory system and skin cells. Our paper

mainly focuses on converting that waste into the cement which

can be used as cement slurry in the cementing operations in

the drilling progress. So we can eliminate the disposal and put

into the same well as it can save environmental issues. The

benefits of this approach are Proved method to bring cement

from all the drilling waste

1. The equipment which is used for cementing also can

be decreased as overall cost for a wellalso can be reduced.

2. The cementing operation time also will be reduced

3. The produced cement also can be used to any

formation like the Portland cement slurry.

CONVERSION PROCEDURE

Preparation of Blast Furnace Slag

Blast furnace slag is needed to add in the waste

mud. BFS is manufactured as a bi product from the iron and

steel making process. The product is allowed by a flowing

steam to produce glassy and annular product further it is dried

and powder form obtained. The composition of BFS is given in

table 1.

Table 1: The chemical composition of Blast Furnace Slag

S. No Chemicals of BFS Composition in %

1. Calcium Oxide (30-50%)

2. Silica oxide (28-38%)

3. Alumina oxide 8-24%)

4. Magnesium oxide (1-18%).

The following steps are necessary in the Preparation of

cement from waste Drilling fluids

1. The drilling fluid waste generally is high thick and

viscous after the final circulation. So water should be added to

dilute the mud and the amount of water is dependent on

concentration of mud.

2. The diluted mud is further added with cementing

additives such as dispersants and retarders with small amount

caustic soda and soda ash. All the additives should be mixed

uniformly in the mud.

3. Now add BFS in the mud slowly at the Low mixing

speed for a minute and change to high speed after the

completely added.

4. Pour this prepared slurry into the rheometer cup

and find its lab test according to API procedure either in

atmospheric pressure or pressurized conditions to prove its

withstanding capacity.

DISCUSSIONS

Settling strength

The stability of pumping cement slurry is an

important property because it only seals the zonal isolation

especially this is mandatory in deviated or horizontal wells.

The shrinkage of density correlates with this property. If the

shrinkage is high in density, It may lead to poor stability. The

result of this mud is excellent compared to Portland cement.

Fracture Toughness

All kinds of cements are brittle in nature after it

completely settled. Because formation fluids or casing

corrosion may lead to this happen. The brittleness indicates

fracture stability which can be obtained from stress and strain

strength. The result of this strength is falling in the desired

range as per API regulation.

Strength Regression

The prepared mud is subjected to the high

temperature at 110° C where the compression strength and

permeability of slurry should be measured to check this

property. Whenever cement silica ratio is much excessive than

1.0 it causes this kind of problems. Generally WBS based

cement slurry is required less amount C/S ratio compare to the

Portland cement slurries. The results are also providing

excellent thermal stability rather than other cementing.

CONCLUSION

The article demonstrates clearly the slug mix

cement is shown the good results than the normal Portland

cement does. In the environmental concern, this process is

efficient rather than disposal issue. Choosing the activator

such as Caustic soda and Soda ash is the only key point to

know the quality of slag mix cement. Yet this method is not

developed for the synthetic based drilling fluid which is only

used in drilling deep well. In the future, we have to use a

technique to develop for this mud to overcome completely

about the disposal concern.

REFERENCES

[1] Schlenmer, R.P., Branam, N.E., Edwards, T.M., and

Valenziano, R.C., "Drilling Fluid Conversion: Mud Selection and

Conversion Techniques," Paper 26324, presented at Society of

Petroleum Engineers 68th Annual Technical Conference and

Exhibition, Houston, Oct. 3-6, 1993.

[2] Nahm, J.J., Javanmardi, K., Cowan, K.M., and Hale, A.M., "Slag

Mix Mud Conversion Cementing Technology: Reduction of Mud


Recommended