Kitchen Aid Coffee Mill Grinder

8/7/2019 Kitchen Aid Coffee Mill Grinder

1/38

P R O L I N E S E R I E S


2/38

P R O L I N E S E R

MODEL

KPCG100BURR CO


3/38

Designed to the highest standards of comme

performance and reliability, the KitchenAid

PRO LINE Series Burr Coffee Mill is y

making the finest coffee and espresso possib

Two precision, flat cutting burrs will grind to superb consistency, while the low-noise

and gear reduction system work to minimi

frictional heating of the grinds, maximizing

coffees flavor and aroma. The all-metal ho

l h t l d bl t li h d il l d th


4/38

INTRODUCTION

Introduction............................................................

Proof of Purchase & Product Registration ...............

Coffee Maker Safety ..............................................

Important Safeguards ............................................

Electrical Requirements ..........................................

FEATURES AND OPERATION

Coffee Mill Features................................................

Using the Coffee Mill

TABLE OF CONT


5/38

TABLE OF CONTENT

WARRANTYAND SERVICE INFORMATION

Warranty for the 50 United States & District of Columbia...........

Warranty for Puerto Rico .............................................................

Arranging for Hassle-Free Replacement .......................................

Ordering Accessories and Replacement Parts .............................

Arranging for Service After the Warranty Expires .......................Arranging for Service Outside the 50 United States

& Puerto Rico...............................................................................


6/38

PROOF OF PURCH& PRODUCT REG

Always keep a copy of the sales receipt showing the

your Coffee Mill. Proof of purchase will assure you of

Before you use your Coffee Mill, please fill out and m

registration card packed with the unit. This card will

you in the unlikely event of a product safety notificatcomplying with the provisions of the Consumer Prod

card does not verify your warranty.

Please complete the following for your personal reco


7/38

COFFEE MILL SAFE

Your safety and the safety of others are very imporWe have provided many important safety messages in this manual and appliance. Always read and obey all safety messages.

This is the safety alert symbol.This symbol alerts you to potential hazards that can kill or and others.

All safety messages will follow the safety alert symbol andthe word DANGER or WARNING. These words mean:

You can be killed or seriously if you dont immediately followinstructions.

You can be killed or seriously if you dont follow instructions

!DANGER

WARNING


8/38

When using electrical appliances, basic safety precau

be followed, including the following:

1. Read all instructions.

2. To protect against the risk of electric shock, do n

in water or other liquids.3. Close supervision is necessary when any applia

near children.

4. Unplug the Coffee Mill from the outlet when no

putting on or taking off parts, and before cleani

5 A id t ti i t

IMPORTANT

SAFEGUA


9/38

Volts: 120 V.A.C. only.

Hertz: 60 Hz

NOTE: This

Coffee Mill has a

3 prong

grounded plug.

To reduce the

risk of electrical

shock, this plug

will fit in an

ELECTRICAL

REQUIREMENT

WARN

Electrical Shock

Plug into a ground3 prong outlet.

D t


10/38

P R O L I N E S E R

FEATURESAND

OPERAT


11/38

MODEL KPCG100

BURR COFFEE MIL

FEATUR

Model KPCBurr Coffe


12/38

Motor HousingDie-cast metal housing is stable,

durable, and easy to clean.

Bean Hopper

7 oz. capacity bean

hopper unscrewsfrom the motor

housing for simple

cleaning. Press-fit hopper lid makes

for quick and easy filling. Hopper


13/38

Faceplate Assembly& Screws

Assembly includes the

grind control dial and

grind level ring. Two

faceplate screws attach the

faceplate assembly to the motorhousing. Loosen the screws and

remove the faceplate assembly to

access the burrs.

Low-RPM OperationA special DC motor and ge

reduction system slows th

of the cutting burrs, minim

the frictional heating of th

and preserving coffee flavo

aroma. The low rpm opera

reduces the static charge

cling of coffee grinds.

Power Cord with Tie

MODEL KPCG100

BURR COFFEE MILL

FEATUR


14/38

2. Slide the cplatform; t

the motor

slightly to

Make certa

in the mid

Before First Use

Before using the coffee mill, wipe

the motor housing and cord with a

clean damp cloth. Wash the bean

hopper, hopper lid, and coffee bin in

hot soapy water, then rinse and dry.

The bean hopper, hopper lid, and

coffee bin can also be washed in the

top rack of a dishwasher.

Operating the Coffee Mill

USING THE

PRO LINE SERIEBURR C


15/38

6. Select the grind by turngrind control dial to the

setting on the grind leve

the grind setting table o

page to match the grind

your brewing process. W

youll be able to refine t

to match your own tast

USING THE

PRO LINE SERIESBURR COFFEE

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prongoutlet.

Do not remove ground prong.


16/38

7. To grind coffee, flip the On/OffSwitch to the On position.


17/38

Setting

8

5

1

Grind

Fine

Medium

Coarse

For

Espresso

Automatic Drip

French Press

Average Grind Sproduced by the coffee mill b

325 microns

750 microns

1250 microns

Adjusting the Cutting Burrs Adjusting for MaximumGrind Fineness

Grind Setting Table

ADJUSTING THE

CUTTING BUR


18/38

3. Using a 532-inch allen wrench orhex-head screwdriver, remove the

screw located in the front of the

grind control dial by turning it

counter-clockwise. Hold the grind

control dial so that it does not

rotate as the screw is removed.

Once the screw is free, remove

the grind control dial.

5. Rotate the clockwise 1

time until y

touching o

touch, the

rubbing


19/38

7. Re-attach the grind control dial,making certain the dial indicator

points to grind level 8.

NOTE: If the coffee mill produces a

grating or rubbing sound during

use, the burrs have been improperly

adjusted. Damage to the burrs will

result. Readjust the burrs immediately.

Adjusting to Provide

screw is free, remove tcontrol dial.The white g

control gear should be v

the dial is removed.

3. Rotate the grind contro

counter-clockwise 1 cdetent at a time until t

clicking sound dimin

the gear offers little res

being turned.

ADJUSTING THE

CUTTING BUR


20/38F t d d d i ff

PRO LINE

SERIES

BURR COFFEE

TI

Select the correct grind for the b

using. 15 grind levels are availab

increments from 1 to 8. Level 8

grind perfect for espresso, 412 to

appropriate for automatic drip c

1 is a coarse grind suited to FrenExperiment your tastes may be

using a slightly finer or coarser g

1


21/385Clean the coffee bin and cutting burrs frequently.

3Ground coffee loses flavor and aroma very quickly. For th

results, grind only as much as you intend to immediately

4

To retain freshness, coffee beans should be stored in an airtig

container and kept in a cool, dark place. It is not recommendyou store beans in the grinders bean hopper for a prolonged

PRO LINE

SERIES

BURR COFFEE MI

TIPS


22/38

The flavor of coffee depends on avariety of factors, including the

quality, freshness, and roast of the

beans, the purity of the brew water,

the cleanliness of the brewing

equipment, and the brewing

temperature. The finenessand consistency of the grind

is also critical.

oils and essenthin and wea

grind is used,

simply makes

without maki

The consistean importan

coffee and

HOW THE GRIND

AFFECTS FLA


23/38

Coffee grind quality is directly relatedto the type of grinder used. High

speed grinders with small burr sets

are usually not able to produce

the fineness or consistency required

for the best espresso. They also

excessively heat the beans whilegrinding, resulting in lost flavor

and aroma.

The PRO LINE Series Burr Coffee


24/38

P R O L I N E S E R I

CAREAND

CLEANI


25/38

CARE ANDCLEANING

Cleaning the Motor Housingand Hoppers

Make sure the coffee mill is switched

unplugged before cleaning.

Do not immerse the motor housing in

Never immerse the cutting burrs, burr

assembly, or face-plate assem

Keep them dry at all times.


26/38

Cleaning the Cutting BurrsIf the mill is used frequently, the

cutting burrs need to be cleaned

every few weeks for best performance.

Cleaning enables the burrs to achieve

the finest, most consistent grinds

possible which is especially importantwhen grinding coffee for espresso.

Foreign objects like pebbles or twigs

sometimes find their way into whole

2. Using a flatthe two fac

clockwise u

assembly is

screws have

prevent the

from the fa


27/38

3. Carefully slide the faceplateassembly away from the motor

housing. A separate burr-shaft

assembly on the inside of the motor

housing will usually slide out with

the face plate assembly. Place a

hand under the burr-shaft assemblyto prevent it from falling as the

faceplate assembly is removed. If

the burr-shaft assembly does not

slide out with the face-plate

assembly grasp the center shaft of

CARE ANDCLEANING


28/38

5. After cleaning, tilt the grinderbackward so the front of the motor

housing faces upward.

7. Once the bu


29/38

8. Place the faceplate assembly ontothe motor housing. Make sure the

numbers on grind level ring are

positioned across the top of the

assembly. Using your fingers, tighten

the faceplate screws by turning them

clockwise. Alternate tightening thescrews, keeping them even do not

completely tighten one screw before

tightening the other.

Adjusting The CuttinFor Wear

The cutting burrs are made

quality stainless steel for exc

longevity. After prolonged u

the burrs might require adju

compensate for wear. If youespecially espresso are no

they used to be, an adjustm

probably needs to be made

CARE ANDCLEANING


30/38

Replacing the Cutting BurrsIf the cutting burrs are damaged, or

have reached the end of their life

(usually after grinding 600800 lbs.

of coffee), they can be replaced easily.

Contact KitchenAid at 1-800-541-6390

to order a set of replacement burrs.

To replace the burrs:

1. Remove the faceplate and burr-shaft

assemblies. For instructions, see

Cl i h C i B

3. Remove thehousing by

mounting s

until free.


31/38

TROUBLESHOOTIN

If the mill does not run when switched on:

Check to see if the mill is plugged into a grounded 3 prong outlet.

the mill, then plug it back in again. If the grinder still does not wo

fuse or circuit breaker on the electrical circuit the mill is connected

sure the circuit is closed. If the mill does not run after taking these

object may be jamming the cutting burrs. See Cleaning the Cuttin

page 25 for more information.

If the mill runs when switched on, but coffee does not grind:

The cutting burrs require cleaning or are worn. See Cleaning the C


32/38

P R O L I N E S E R I

WARRANTY

AND SERVIINFORM

WARRANTY


33/38

COFFEE MILL WARRANTY

FOR THE 50 UNITED STAAND DISTRICT OF COLUM

This warranty extends to the purchaser and any succeeding owner for PRO

Burr Coffee Mills operated in the 50 United States and District of Columbi

KitchenAid Will Pay For Your

Choice of:

Hassle-Free

Replacement of

your Coffee Mill.See Arranging for

Hassle-Free

Replacement for details, or call

the KitchenAid Customer

Satisfaction Center toll free at

KitchenAid

Pay F

A. Repairs w

Coffee Mi

in other tnormal sin

home use

B. Damage re

accident, a

misuse or a

Length of

Warranty:

Two Year Full

Warranty for

Household Use,from date of

purchase.

COFFEE MILL


34/38

COFFEE MILL

WARRANTY

FOR PUERTO

A limited two year warranty extends to the purchaser and any

PRO LINE Series Burr Coffee Mills operated in Puerto Rico. D

period, all service must be handled by an Authorized KitchenA

Please bring the Coffee Mill, or ship it prepaid and insured, to

Service Center. Call toll-free 1-800-541-6390 Monday throug

(Eastern Time), or Saturday, 10 a.m. to 5 p.m. to learn the loc

near you. Your repaired Coffee Mill will be returned to you pr


35/38

ARRANGING FOR

HASSLE-FREE REPLAC

IF YOU RESIDE IN THE 50 UNITED STATES and your KitchenAid PRO LI

Burr Coffee Mill should fail within two years of ownership, simply call our

Customer Satisfaction Center at 1-800-541-6390 Monday through Friday,

8 p.m. (Eastern Time), or Saturday, 10 a.m. to 5 p.m. Give the consultant

complete shipping address. (No P.O. Box Numbers, please.)

KitchenAid will arrange to deliver an identical or comparable replacement

free of charge and arrange to have your failed Coffee Mill returned to usreplacement unit will also be covered by our two year full warranty.

When you receive your replacement PRO LINE Series Burr Coffee Mill, use

and packing materials to pack-up your failed Coffee Mill. In the carton,


36/38

ARRANGING FOR SERVIC

THE WARRANTY E

For service information, call toll-free 1-800-541-6390 Monda

8 a.m. to 8 p.m. (Eastern Time), or Saturday, 10 a.m. to 5 p.m

Customer Satisfaction Center, KitchenAid Portable Appliances,

St. Joseph, MI 49085-0218.

WARNING

Electrical Shock Hazard


37/38

Date post:	08-Apr-2018
Category:	Documents
Upload:	roman-tatus
View:	224 times
Download:	1 times

Kitchen Aid Coffee Mill Grinder

Documents