KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\010COV.fm masterpage: Cover

4-748-168-11(2)

TelevisionReference Guide

KLV-50W672G / 43W672G / 32W672G / 32W622G

KLV-50W672G

HOME

Customer Support and Contact:http://www.sony-asia.com/support

(Except KLV-32R422G)

Help Guide

/ 32R422G

/ 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

2GB

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\010COVTOC.fm masterpage: Left

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

Table of Contents

Safety Information . . . . . . . . . . . . . . . . . . . . . 3

Parts and Controls . . . . . . . . . . . . . . . . . . . 4Controls and Indicators . . . . . . . . . . . . . . . . .4

Using Remote Control . . . . . . . . . . . . . . . . 5Remote Control Parts Description. . . . . . . . . 5

Setting up the Internet Connection . . . . . 7Type 1: Secured network with Wi-FiProtected Setup™ (WPS) . . . . . . . . . . . . . . . . 7Type 2: Secured network without Wi-Fi Protected Setup™ (WPS) . . . . . . . . . . . . . . . .8Type 3: Unsecured network with any typeof wireless LAN router . . . . . . . . . . . . . . . . . .8Type 4: Wired network setup . . . . . . . . . . . .8Preparing a Wired Network . . . . . . . . . . . . . .9Viewing the Network Status . . . . . . . . . . . . .9

USB Tethering . . . . . . . . . . . . . . . . . . . . . . . 9

Privacy Policy . . . . . . . . . . . . . . . . . . . . . . 10

Changing the Viewing Style . . . . . . . . . . .11Changing the Wide Mode . . . . . . . . . . . . . . 11Setting Scene Select . . . . . . . . . . . . . . . . . . . 11

Navigating through Home Menu . . . . . . .11Apps/All Apps. . . . . . . . . . . . . . . . . . . . . . . . 11Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Network Setup . . . . . . . . . . . . . . . . . . . . . . . 22Customer Support . . . . . . . . . . . . . . . . . . . . 22Help Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Home Screen . . . . . . . . . . . . . . . . . . . . . . 23Recommendations Row. . . . . . . . . . . . . . . . 23Recent Channels . . . . . . . . . . . . . . . . . . . . . . 23

Connection Diagram . . . . . . . . . . . . . . . . 24

Using Audio and Video Equipment . . . . 27

Using Screen mirroring . . . . . . . . . . . . . . 27

Installing the TV to the Wall . . . . . . . . . . 28

Troubleshooting . . . . . . . . . . . . . . . . . . . 29Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Specifications . . . . . . . . . . . . . . . . . . . . . .32

To attach the Table-Top Stand, refer to the Setup Guide.

3GB

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\020REG.fm masterpage: Right

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

IntroductionThank you for choosing this Sony product.Before operating the TV, please read this manual thoroughly and retain it for future reference.

Note• Before operating the TV, please read the “Safety Information”

(page 3).• Read the supplied Safety Information for additional safety

information.• Instructions about “Installing the TV to the Wall” are included

within this TV’s instruction manual.• Images and illustrations used in the Setup Guide and this

manual are for reference only and may differ from the actual product.

Location of the identification labelLabels for the TV Model No. and Power Supply rating are located on the rear of the TV.

For models with supplied AC adapter:Labels for AC adapter Model No. and Serial No. are located at the bottom of AC adapter.

Installation/Set-upInstall and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electric shock or damage and/or injuries.Apparatus connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing – and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11).

Installation• The TV set should be installed near an easily accessible AC

power outlet (mains socket).• Place the TV set on a stable, level surface to prevent it from

falling over and causing personal injury or property damage.• Install the TV so that the TV’s Table-Top Stand does not protrude

out from the TV stand (not supplied). If the Table-Top Stand protrudes out from the TV stand, it may cause TV set to topple over, fall down, and cause personal injury or damage to the TV.

Transporting• Before transporting the TV set, disconnect all cables.• Two or three people are needed to transport a large TV set.• When transporting the TV set by hand, hold it as shown below.

Do not put stress on the LCD panel and the frame around the screen.

• When lifting or moving the TV set, hold it firmly from the bottom.

• When transporting the TV set, do not subject it to jolts or excessive vibration.

• When transporting the TV set for repairs or when moving, pack it using the original carton and packing material.

Topple prevention

(Except models with supplied support belt kit)

Help Guide (Manual) (Only on limited region/country/TV model)For more detailed information, press HOME on the remote control, then select [Help Guide] under [Settings] menu. You can also check the Help Guide from your PC or smartphone (information provided on the back cover of this manual).

Safety Information 1

M6 screw (not supplied)

8 mm - 12 mm

1.5 N·m/{15 kgf·cm}

Screw (not supplied)

Cord(not supplied)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\030PAR.fm masterpage: Left

Parts and Controls

KLV-50W672G / 43W672G

KLV-32W672G / 32W622G / 32R422G

(Power) /+/–

When the TV is off,

Press to power on.When the TV is on,

Press and hold to power off.Press repeatedly to change the function, then press + or – button to:• Adjust the volume.• Select the channel.• Select the input source of TV.

Sensors/LED indicator

• Receives signals from the remote control.Do not put anything over the sensor.Doing so may affect its function.

• Lights up in amber when the [Sleep Timer]* or [On Timer]* is set, or the TV is in Photo Frame Mode*.

• Lights up in white when [Power Saving]* is set to [Picture Off]*.

• Lights up in white when the TV is turned on.

• Does not light up when the TV is in standby mode.

• Flashes while the remote control is being operated.

(Only on limited region/country/TV model)

* For more detailed information, press HOME on the remote control, then select [Help Guide] under [Settings] menu.

Note• Make sure that the TV is completely turned off before

unplugging the AC power cord (mains lead).• To disconnect the TV from the AC power (mains)

completely, pull the plug from the AC power outlet (mains socket).

• Please wait for a while when perform input selection to change to other input.

Controls and Indicators

4GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\030PAR.fm masterpage: Right

Using Remote Control

STB (STB Standby) (STB)

Turn the STB on or switch to standby mode (refer Help Guide).

(TV standby) (TV)

Turn on or turn off the TV (standby mode).

/ (Input select/Text hold) (TV)

In TV mode: Display and select the input source.In Text mode: Hold the current page.

TV/STB Selector (TV/STB)

Change Remote to TV/STB Mode (refer Help Guide).

SYNC MENU (TV)

Press to display the BRAVIA Sync Menu and then select connected HDMI equipment from [Device Selection]. The following options can be selected from BRAVIA Sync Menu.

Remote Control Parts Description

The remote control shape, location, availability and function of remote control buttons may

vary depending on your region/country/TV model.

Note• The number 5, , PROG + and AUDIO buttons

have tactile dots. Use the tactile dots as references when operating the TV.

• The buttons with yellow characters printed on it are activated after pressing the STB selector.

For more detailed information on STB related buttonoperation, press HOME on the remote control, thenselect [Help Guide] under [Settings] menu.

5GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\030PAR.fm masterpage: Left

Device Control:

Use the [Device Control] to operate equipment that is compatible with BRAVIA Sync Control. Select options from [Home (Menu)], [Options], [Content List] and [Power Off] to operate the equipment.

Speakers:

Select [TV Speakers] or [Audio System] to output the TV’s sound from the TV speakers or connected audio equipment.

TV Control:

Use the [TV Control] menu to operate the TV from the [Home (Menu)] or [Options] menu.

Return to TV:

Select this option to return to the TV programme.

Number buttons (TV/STB)

(Wide Mode) (TV)/FAV (STB)

• Adjust the screen display. Press repeatedly to select the desired wide mode.

• FAV (favourite) for STB (refer Help Guide).

(Text) (TV)/VOD (STB)

• Display text information.• VOD (Video on Demand) Access On

Demand Service (refer Help Guide).

Colour buttons (TV/STB)

Execute corresponding function at that time.

YouTube (Only on limited region/

country/TV model) (TV)

Access the “YouTube” online service.

NETFLIX (Only on limited region/

country/TV model) (TV)

Access the “NETFLIX” online service.

/ (Info/Text reveal) (TV/STB)

Display information.

SLEEP (TV)

Press repeatedly until the TV displays the time in minutes ([Off]/[15 min]/[30 min]/[45 min]/[60 min]/[90 min]/[120 min]) that you want the TV to remain on before shutting off. To cancel the sleep timer, press SLEEP repeatedly until [Off] appears.

(TV)/GUIDE (STB)

• Exit Text mode, or switch to a TV display when displaying external input.

• Guide to browse channel (EPG) in STB (refer Help Guide).

RETURN (TV/STB)

Return to the previous screen.

OPTIONS (TV)

Display a list that contain shortcuts tosome setting menus.The listed options vary depending on thecurrent input and content.

HOME (TV/STB)

Display the TV Home menu.

//// (Navigation D-Pad) (TV/

STB)

On screen menu navigation and selection.

+/– (Volume) (TV/STB)

Adjust the volume.

(Jump) (TV/STB)

Return to the previous channel or input viewed more than 15 seconds.

(Mute) (TV/STB)

Mute the sound. Press again to restore the sound.

PROG +/–/ / (TV/STB)

In TV mode: Select the channel.In Text mode: Select the next ( ) or previous ( ) page.

AUDIO (TV)

Select the sound of multilingual source or dual sound for the programme currently being viewed (Depend on programme source).

REC (STB)

Record the current programme.

TITLE LIST (STB)

Display the Title list.

////// (TV/STB)

• Operate media contents on the TV and connected BRAVIA Sync-compatible device.

• This key also can be used to operate VOD (Video on demand) service playback. Availability is depend on VOD service. (Except KLV-32R422G)

• / are not supported for STB.

(TV)

Replay the scene/briefly fast forwards the scene.

6GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\040CTI.fm masterpage: Right

Setting up the Internet Connection(Except KLV-32R422G)To use the network features of your TV it needs to be connected to the Internet. The setup procedure differs depending on the type of network and LAN router. Before setting up the Internet connection, be sure to set up a LAN router. Check your wireless LAN environment using the following chart.

Wireless LAN

* Type 1 is easier to set up if your router has an automatic setting button, e.g. Air Station One-Touch Secure System (AOSS). Most of the latest routers have this function. Check your router.

Type 1: Follow the configuration for Secured

network with Wi-Fi Protected Setup™

(WPS).Type 2: Follow the configuration for Secured

network without Wi-Fi Protected

Setup™ (WPS).Type 3: Follow the configuration for Unsecured

network with any type of wireless

LAN router.Type 4: Follow the configuration for Wired

network setup.

The WPS standard makes security of a wireless home network as straightforward as pressing the WPS button on the wireless LAN router. Before setting up a wireless LAN, check the location of the WPS button on the router and verify how to use it.For security purpose, [WPS (PIN)] provides a PIN code for your router. PIN code is renewed every time you select [WPS (PIN)].

1 Press HOME, then select [Settings]* [System Settings] [Setup] [Network] [Network Setup].

2 IP Address setting/Proxy server:– automatic setting:[Set up network connection] [Easy]– manual setting:[Set up network connection] [Expert] [Wired Setup] or [Wireless Setup]

3 Select [WPS (Push Button)] for Push Button method or [WPS (PIN)] for PIN method.

NoteButton name of the WPS may differ depending on the router (e.g. AOSS button).

4 Follow the instructions on the setup screen.

Note• If you use WPS for network setup, the security

settings of the wireless LAN router activate, and any equipment previously connected to the wireless LAN in a non-secure status will be disconnected from the network.In this case, activate the security settings of the disconnected equipment and then reconnect. Or, you can deactivate the security settings of the wireless LAN router, and then connect the equipment to a TV in a non-secure status.

• To use the network with IPv6, select [Settings]* [System Settings] [Setup] [Network] [IPv6/IPv4 Priority] [IPv6], then select [Easy] in [Set up network connection].

• When IPv6 is selected, HTTP Proxy cannot be set.

Secure Wireless LAN? NOk Type 3

YES m

Do you use a wireless LAN router compatible with Wi-Fi Protected Setup™ (WPS)?

NOk Type 2

YES mType 1*

Wired LAN , Type 4

Type 1: Secured network with Wi-Fi Protected Setup™ (WPS)

7GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\040CTI.fm masterpage: Left

To set up a wireless LAN, SSID (wireless network name) and security key (WEP or WPA key) will be required. If you do not know them, consult the instruction manual of your router.



3 Select [Scan], then select a network from the list of scanned wireless networks.


Note• To use the network with IPv6, select [Settings]*

[System Settings] [Setup] [Network] [IPv6/IPv4 Priority] [IPv6], then select [Easy] in [Set up network connection].

• When IPv6 is selected, HTTP Proxy cannot be set.• Please make sure your surrounding is secure when

you key in your password.

To set up a wireless LAN, SSID (wireless network name) will be required.



3 Select [Scan], then select a network from the list of scanned wireless networks.


Note• Security key (WEP or WPA key) will not be required

because you do not need to select any security method in this procedure.



Enter the respective alphanumeric values for your router if necessary. The items that need to be set (e.g. IP Address, Subnet Mask, DHCP) may differ depending on the Internet service provider or router. For details, refer to the instruction manuals provided by your Internet service provider, or those supplied with the router.




Type 2: Secured network without Wi-Fi Protected Setup™ (WPS)

Type 3: Unsecured network with any type of wireless LAN router

Type 4: Wired network setup

8GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\040CTI.fm masterpage: Right

[Network Setup] can also be set from [Auto Startup] menu.

Note• Allows automatic configuration of your wired/

wireless network.When connecting with LAN cable: WiredWhen connecting with built-in Wireless LAN:

WirelessWhen connecting with both of the cables: Wired

• Set to [Easy], sets the IP address automatically. For proxy server is not use.



* Terminals and labels may vary depending on TV model.

Note• For LAN connections, use a Category 7 cable (not

supplied).

You can confirm your network status.


2 Select [View Network setting and status].

* Only on limited region/country/TV model.

USB Tethering(Except KLV-32R422G)Your smartphone (depending on models/compatible OS version) can be used as a wireless modem to share its mobile data connection with the TV via USB cable.Your TV will automatically detect USB Tethering connection if a compatible mobile with USB Tethering turned ON is connected.

To confirm your USB Tethering statusPress HOME, then select [Settings]*

[System Settings] [Setup] [Network]

[USB Tethering Status].


Preparing a Wired Network

Viewing the Network Status

Internet

Modem with router functions

or

Router

Modem

Internet

TV*

9GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\040CTI.fm masterpage: Left

Privacy Policy(Except KLV-32R422G)When you use the following functions to connect to the Internet, certain information will be sent to Sony Visual Products Inc. global servers, which is considered to be personal information, and requires your agreement in order for service providers to use it.• System software updates by connecting to

Sony Visual Products Inc. global servers via the Internet.

• Internet content or other Internet services from service providers like YouTube.

This TV has the setting screens in auto startup sequence or [Setup] menu to confirm your agreement to this after you read the detail of the Privacy Policy. If you want to use these functions, please check [Enable Smart TV] in each setting screen. If [Disable Smart TV] is checked, the above two functions are not available.However, even in this case, if [On] is selected at [Automatic Software Download] in auto startup sequence or [Customer Support] menu, the system software updating is available.You can change this setting by pressing HOME, then select [Settings]* [System Settings] [Setup] [Privacy Policy].


10GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\060NHM.fm masterpage: Right

Changing the Viewing Style

1 Press repeatedly to select the wide mode.

For HDMI PC Input (PC timing)

1 Press OPTIONS.

2 Press / then to select [Scene Select].When you select the desired scene option, the optimum picture and sound quality for selected scene are automatically set. The options you can select may vary. Unavailable options are greyed out.

Navigating through Home MenuThe HOME button allows you to access a variety of TV settings and features.

(Only on limited region/country/TV model)Internet Content delivers a variety of on-demand entertainment straight to your TV. You can enjoy your favourite internet content (Except KLV-32R422G), Photo Sharing Plus (Except KLV-32R422G), Photo Frame Mode and FM Radio.

Note• Be sure to connect your TV to the Internet and

complete [Network Setup] (page 18).

To use Internet Content

1 Press HOME.

2 Press /// then to select [Apps].

3 Press /// to select the desired internet service in service list.

4 Press to launch the desired internet content.

To exit Internet ContentPress HOME.

Note• If you experience difficulties with this feature, check

that the Internet connection is set up properly.• The interface to Internet content depends on the

Internet content providers.• To update Internet Content services, press HOME,

then select [System Settings] [Setup] [Network] [Refresh Internet Content].

To use NETFLIXPress NETFLIX button on the remote control to launch menu.

Note• It is possible that Netflix cannot be used via a Proxy

server.

Changing the Wide Mode

[Wide Zoom]* [Normal]

[Full] [Zoom]*

* Parts of the top and bottom of the picture may be cut off.

[Normal] [Full 1]

[Full 2]

Setting Scene Select

Apps/All Apps

11GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\060NHM.fm masterpage: Left

Photo Sharing PlusConnect, view and save favourite photos on TV using your devices (e.g. smartphones or tablets).

HOME [Apps] [Photo Sharing Plus]

Note• Follow the instructions on the screen to connect your

device to the TV.• Open web browser on device after all connections are

established, then follow the instructions on the screen to access the URL.

To display photo on TV

1 Tap on your device to start.

2 Select a photo.The selected photo will be displayed automatically on TV.

To save a photo displayed on TV

1 Tap thumbnail on your device, then hold the photo to open the context menu.

2 Select [OK].

Note• Up to 10 smartphones or tablets can be connected to

the TV at the same time.• Maximum file size of each photo is 10 MB.• You can also throw a background music with a

maximum file size of 30 MB.• The default browser for Android 2.3 or later is

supported.• The default browser for iOS is supported; however,

some functions cannot be used depending on the version of your iOS.

Photo Frame ModePhoto Frame Mode displays the clock and calendar at the same time as displaying a photo, and listening to music or FM radio.

HOME [Apps]/[All Apps]* [Photo Frame Mode]

To launch Photo Frame Mode while playback USB media

1 Press OPTIONS while playback a photo or music file.

2 Press / then to select [Photo Frame Mode] to launch Photo Frame.


To select Display modeYou can change the Photo Frame Mode display by selecting [Display Mode] in the [Photo Frame Settings] (page 19).

To select Clock Display modeYou can select among three clock display modes by selecting [Clock Display] in the [Photo Frame Settings] (page 19).

Note• This TV does not have a battery powered backup for

the clock. If there is a power failure or if you disconnect the power cord, the current date and time will reset automatically.

DurationTo save power, the TV continually plays back in Photo Frame Mode for up to 24 hours before powering off automatically. After automatic power off, do not use Photo Frame Mode for at least one hour to avoid panel burn-in. You can change the setting of the [Duration] in the [Photo Frame Settings] (page 19).

To avoid panel burn-in, the position of the photo, clock and calendar are switched automatically every hour.

FM Radio

HOME [Apps]/[All Apps]* [FM Radio]

Note• Press PROG +/– to select an FM radio station. Press

RETURN to exit FM Radio mode.

Presetting Radio StationsWhen you use FM Radio function for the first time, press HOME and select [Settings]* [System Settings] [Channel Setup] [FM Radio Setup] [Auto Tuning].

12GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


To change preset radio stations

1 Press OPTIONS in FM Radio mode.

2 Press / then to select [FM Radio Presets].

3 Press / then to select the radio station you want to change.

4 Press / then to change the FM frequency then press again to edit FM Radio station name.


Note• If the station has a noisy sound, you may be able to

improve the sound quality by pressing /.• When an FM stereo programme has static noise, press

AUDIO until [Mono] appears. There will be no stereo effect, but the noise will be reduced.

(Only on limited region/country/TV model

FavouritesThe Favourite feature allows you to specify up 18 channels of your favourite programmes.

1 Press HOME.

2 Press / then to select [Favourites].

3 Press / then to select a programme.

Playback Photo/Music/Video via USBYou can enjoy photo/music/video files stored in a Sony digital still camera/camcorder/smartphone (depending on models)* through a USB cable or USB storage device on your TV.

1 Connect a supported USB device to the TV.

* Device needs to be in Media transfer mode (MTP).

2 Press HOME.

3 Press /// then to select [Photo], [Music] or [Video] under [Media] menu.

4 [Device Selection] appears. Press / then to select a device.

5 Press /// then to select a file or folder.

Playback OptionsPress the red button in thumbnail view to display the list of USB playback settings.

Display SettingsPress OPTIONS in thumbnail view to display the option to change the thumbnail view to list view.

To adjust the picture and sound quality of USB media

Press OPTIONS during media playback then select [Picture] or [Sound].

Note• Press /// then to select and adjust an item.

To play a photo as a slideshow (Photo)

1 Press the green button in thumbnail/list view to start slideshow.To set [Slideshow Effect] and [Slideshow Speed], press OPTIONS [Playback Options]. To stop a slideshow, press RETURN.

Channels

Media

13GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


GB

Note• While the TV is accessing the data on a USB device,

observe the following: Do not turn off the TV. Do not disconnect the USB cable. Do not remove the USB device.The data on the USB device may be damaged.

• Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any connected devices or the TV.

• The file system on the USB device supports FAT16, FAT32 and NTFS.

• The file name and folder name may not display correctly in some cases.

• When you connect a Sony digital still camera, set the camera’s USB connection mode to Auto or Mass Storage. For more information about USB connection mode, refer to the instructions supplied with your digital camera.

• Use a USB storage device that is compliant with USB mass storage device class standards.

• If a selected file has incorrect container information, or is incomplete, it cannot be played back.

USB Photo format

USB Music format

USB Video format

File Format Extension

JPEG *.jpg / *.jpeg

Extension Audio Codec

*.mp3 MPEG1 audio layer3

*.wav LPCM

DTS-CD

*.wma WMA V8

*.flac FLAC

AVI (*.avi)

Video Codec Audio Codec

MPEG1MPEG2XviDMPEG4H.264Motion JPEG

PCMMPEG1 Layer1/2MPEG2 AACMPEG4 AACMPEG4 HE-AAC Dolby DigitalDolby Digital PlusWMA v8MP3

ASF (*.wmv, *.asf)


WMV9XviDVC-1

MP3WMA V8

MP4 (*.mp4, *.mov, *.3gp)


MPEG4H.264H.263Motion JPEGH.265

MPEG1 Layer1/2MP3MPEG2 AACMPEG4 AACMPEG4 HE-AACAC4OPUS

MKV (*.mkv)


WMV9MPEG4H.264VC-1

PCMMPEG1 Layer1/2MP3MPEG2 AACMPEG4 AACMPEG4 HE-AACAC3 [Dolby Digital]WMA V8E-AC3 [Dolby Digital Plus]DTSFLACOPUS

WebM (*.webm)


VP8VP9

VORBISOPUS

PS (*.mpg, *.mpeg, *.vro, *.vob)


MPEG1MPEG2

MPEG1 Layer1/2MP3Dolby DigitalDolby Digital PlusDTS

TS (*.ts, *.m2ts)


MPEG2H.264VC-1H.265

MPEG1 Layer1/2MP3MPEG2 AACMPEG4 AACMPEG4 HE-AACDolby DigitalDolby Digital PlusDTSAC4

14

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


15GB

Note• Playback of the above file formats is not guaranteed.

Some resolutions or other factors can cause the file cannot be playback.

Playback Photo/Music/Video via Home Network(Except KLV-32R422G)You can enjoy various content (e.g. photo/music/video files) stored on media servers. The home network feature allows you to enjoy network content in other rooms.

Playing Photo/Music/Video

1 Press HOME, then select [Media] [Photo], [Music] or [Video] the desired media server.

2 Select files or folders to play from the list.

Note• Files from a network device need to be in the

following formats:Still images: JPEGMusic: MP3, linear PCM, WMAVideo: AVCHD, MPEG2, MPEG1, MP4 (AVC), MP4

(MPEG4), WMV• Depending on the file, playback may not be possible

even when using the supported formats.

RendererYou can play back photo, music and video files stored in network devices (e.g. digital still cameras, mobile phones, PC) on the TV screen by directly operating the target device. The network should also be renderer-compatible devices.

Renderer settingsPress HOME, then select [Settings]* [System Settings] [Setup] [Network] [Home Network Setup] [Renderer].

Display Settings for Media ServersSelect home network servers to be displayed in the Home Menu. Up to 10 servers can be displayed.

1 Press HOME, then select [Settings]* [System Settings] [Setup] [Network] [Home Network Setup] [Server Display Settings].

2 Select the server to display in the Device Selection.


System SettingsNote• The options you can adjust vary depending on the

situation. Unavailable options are greyed out or not displayed.

Settings

Picture

Picture ModeSets a picture mode.

ResetResets all the [Picture] settings except [Picture Mode] and [Intelligent Picture Plus] to the default settings.

Backlight Adjusts the brightness of the backlight.

PictureIncreases or decreases picture contrast.

Brightness Brightens or darkens the picture.

Colour Increases or decreases colour intensity.

Hue Increases or decreases the green tones and red tones.

Colour TemperatureAdjusts the whiteness of the picture.

Sharpness Sharpens or softens the picture.

Reality CreationAdjusts fineness and noise for realistic picture.

Resolution: Adjusts fineness and clarity. Select [Manual] from [Reality Creation] to adjust the [Resolution].

Noise Reduction Reduces the picture noise (snowy picture) in a weak signal.

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


MPEG Noise Reduction Reduces the picture noise in MPEG-compressed video.

Film ModeProvides improved picture movement when playing BD (Blu-ray Disc), DVD or VCR images taken on film. Select [Auto] to represent original film-based content as it is.

Note• If the image contains irregular signals or too

much noise, [Film Mode] is automatically turned off even if [Auto] is selected.

Advanced Settings Sets [Picture] settings in more detail.

Reset: Resets all the advanced settings to the default settings.

Adv. Contrast Enhancer: Automatically adjusts [Backlight] and [Picture] to the most suitable settings for dark images scenes.

Black Corrector: Enhances black areas of the picture for stronger contrast.

Gamma: Adjusts the balance between bright and dark areas of the picture.

Clear White: Emphasises white colours.

Live Colour: Makes colours more vivid.

LED Motion Mode: Reduces blur in movies by controlling the LED backlight source, but the brightness decreases.

Intelligent Picture Plus SetupIntelligent Picture Plus: Enhances

picture quality according to preferred settings, channel or video input. The options that can be selected differ depending on the [Scene Select] settings.

Signal Level Indicator: When [On] is selected, the signal level bar will be displayed when you select analogue channel or video input.

Picture Optimisation: Allows you to enhance the picture to your preferred settings.

Sound

ClearAudio+Let you enjoy the best sound quality by the combination of a well-balanced digital signal processing technology.

Sound Mode Select according to content you want to enjoy.

Reset Reset [Surround], [Surround Effect], [Sound Restoration (DSEE)], [Equaliser], [Voice Zoom], [Advanced Auto Volume], [Balance], and [Volume Offset] settings.

SurroundVirtually reproduce realistic surround sound.

Surround EffectAdjust the surround sound effect.

Sound Restoration (DSEE)Reproduce the spatial natural sound quality by decoding high frequencies and small sound often lost by digital compression.

Equaliser Adjusts sound frequency settings.

Voice ZoomEmphasize voice or ambient audio.

Advanced Auto VolumeAutomatically compensates for the volume level that may vary by programme or input.

Balance Emphasises left or right speaker balance.

Volume Offset Adjusts the volume level of the current input relative to other inputs.

16GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


Dual Sound Sets the sound from the speaker to [Mono], [Stereo], [Main] or [Sub].

Note • If the signal is very weak, the sound becomes

monaural automatically.• If the stereo sound is noisy when receiving a

NICAM programme, select [Mono]. The sound becomes monaural, but the noise is reduced.

• The [Dual Sound] setting is memorized for each programme position.

• You cannot listen to stereo broadcast sound when [Mono] is selected.

Hint • If you select other equipment connected to the

TV, set [Dual Sound] to [Stereo], [Main] or [Sub].

Advanced SettingsDynamic Range: Compensates for

differences in the audio level between different channels.

Note• The effect may not function or may vary

depending on the programme regardless of the [Dynamic Range] setting.

Dolby Digital Plus Out: Select [Auto] to pass through Dolby Digital Plus stream to ARC when Dolby Digital Plus is available through connected Audio System. (Except KLV-32R422G)

During Dolby Digital Plus stream is output, Digital Audio Out (optical)* is muted. Select [Off] to convert Dolby Digital Plus stream to Dolby Digital for both ARC (Audio system) and Digital Audio Out (optical)*.


HE-AAC Audio Level: Adjust the HE-AAC audio sound level.

MPEG Audio Level: Adjusts the MPEG audio sound level.

Dolby AC-4 Dialog Enhancer: Adjust the dialog level for AC-4 source.

Screen

Wide Mode For details about wide mode, see page 11.

Auto Wide Automatically changes the wide mode according to the input signal from an external equipment.

4:3 Default Sets the default [Wide Mode] for a 4:3 input signal.

Auto Display Area Select [On] to automatically adjusts the display area based upon the content or [Off] to choose from the [Display Area] options.

Display Area Adjusts the picture display area.

Horizontal Shift Adjusts the horizontal position of the picture.

Vertical Shift Adjusts the vertical position of the picture.

Vertical SizeAdjusts the vertical size of the picture when [Wide Mode] is set to [Wide Zoom].

PC Settings Select [Wide Mode], see page 11.

Channel Setup

1 Digit DirectWhen [1 Digit Direct] is set to [On], you can select a channel using one preset number button (0 - 9) on the remote control.

Auto TuningTunes in all the available channels.

Programme SortingChanges the order in which the channels are stored on the TV.

17GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


Programme LabelsAssign a channel name of your choice up to seven letters or numbers.

Manual Programme PresetBefore selecting [Channel]/[AFT]/[Audio Filter]/[Skip]/[Colour System], press PROG +/– to select the programme number with the channel. You cannot select a programme number that is set to [Skip] (page 18).

Programme/TV System: Presets programme channels manually.

Channel: Selects a channel number.

AFT: Allows you to fine-tune the selected channel manually. When [On] is selected, the fine tuning is performed automatically.

Audio Filter: Improves the sound of individual channels when distortion occurs in mono broadcasts in TV system [B/G], [I], [D/K] and [M].Note • You cannot receive stereo or dual sound

when [Low]/[High] is selected.

Skip: Skips unused channels.

Colour System: Select the colour system according to the channel.

Signal Level: Displays the signal level for programme currently being watched.

FM Radio Setup Presets up to 30 FM radio channels that can be received in your area.

Auto Tuning: Allows you to automatically tune and store all the available channels.

FM Radio Presets: Allows you to manually tune and store each available channel one at a time.

Note • To enable this feature, access to FM Radio

mode by using Home (Menu) (page 12), then preset your desired FM radio channels according to the steps mentioned above.

Parental Lock

PIN Code Sets a PIN code. Use 0-9 on the remote control to enter a four-digit PIN code.

Change PIN Code Select to change your PIN code.

Programme Block Locks a channel from being watched. To view a blocked channel, select [Unblocked].

External Input Lock Locks an external input from being watched. To view a blocked external input, select [Unblocked].

Note • Entering the correct PIN code for blocked

channel or external input will temporarily deactivate the [Parental Lock] feature. To reactivate the [Parental Lock] settings, turn off and on the TV.

Hint• If you lost your PIN code, see page 33.

Internet Lock (Except KLV-32R422G)Locks internet content from being watched. To view a internet content, select [Unblocked].

Setup

Network (Except KLV-32R422G)Network Setup: Sets the network

status settings.

USB Tethering Status: Displays the USB Tethering status.

IPv6/IPv4 Priority: Switch between [IPv6] and [IPv4 (Recommended)].Note • To use the network with [IPv6], select [IPv6],

then select [Easy] in [Set up network connection].


• When IPv6 is selected, some Internet browser sites, applications or contents cannot be watched.

18GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


Built-in Wi-Fi: Turns the built-in wireless LAN [On] or [Off].Set to [Off], if you do not use the built-in wireless LAN.When you switch from [Off] to [On], establish the network connection via [Network Setup].

Wi-Fi Direct: Turns on/off to connect your TV with Wi-Fi Direct device such as PC, mobile phone or digital camera.

Wi-Fi Direct Settings: Set to connect a Wi-Fi direct device to the TV using the Wi-Fi Direct function. If you cannot connect, press OPTIONS key and select [Manual].

Device Name: Change the name of the TV shown on the connected device.

Refresh Internet Content: Connect to the internet to receive available Internet content services.

Home Network Setup:Server Display SettingsDisplays the connected server list. You can select the server to display in the Device Selection.Server DiagnosticsDiagnoses whether the TV can connect to each server on the home network.Remote StartThis feature allow connected device in the home network to turn on the TV.Note • The standby power consumption will

increase if [On] is set.Renderer

Renderer FunctionEnables the TV to play media files on a device (e.g. digital still camera).Renderer Access ControlAllows access from a specified control device.Renderer SetupAdjusts the [Renderer Setup] detailed settings.

Privacy Policy (Except KLV-32R422G)Select [Enable Smart TV] or [Disable Smart TV] for Privacy Policy confirmation. (page 10)

Photo Frame Settings Display Mode: Allows you to select the

display mode. See page 12.

Clock Display: Allows you to select the clock display. Note • This option is available when [Display

Mode] is set to [Image and Clock] or [Full Screen Clock].

Audio Application: Sets [FM Radio], [Music] or [Off] as audio application.

Image Selection: Select image.

Music Selection: Select music.

Slideshow Setting: Select from showing slideshow mode or single view photo.

Music Playback Setting: Select from listening to all tracks or a single music track.

Duration: Select the time period after which the TV automatically switches to standby mode.

First day of the week: Sets [Sunday] or [Monday] as the first day of the week on the calendar.

USB Auto Start When USB device is connected to the USB port, select [On] to automatically view the thumbnail of the last played Photo/Music/Video.

Clock/Timers Sets the timer and clock.

Sleep Timer: Sets the time in minutes that you would like the TV to remain on before shutting off automatically.

On Timer: Turns on the TV from standby mode at a time you set, and tuned to a channel or input of your preference. Before setting this function, make sure you set the correct current time.

Clock Set: Sets the current time and date.DateSet current date.TimeSet Current Time.

19GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


Auto Startup Starts the initial setup procedure. This option allows you to retune the TV after moving houses, or to search for new channels that have been launched by broadcasters.

Language Select the language in which the menus are displayed.

Physical keyboard (for web browser* only)Select the physical keyboard language when physical keyboard is connected to the TV.


Start-up Logo Select [On] to display the logo when the TV is turned on. Select [Off] to disable it.

LED Indicator Select [On] to light up the LED indicator. Select [Off] to disable it.

AV SetupVideo Labels: Assigns name to external

equipment input.EnableSelect [Auto] to display names only when the equipment is connected, or [Always] to display regardless of connection status.Label InputsUses one of the preset labels to assign a name to connected equipment. Select [Edit] to creates your own label.

Colour System: Selects the colour system according to the composite video signal from the input source.

Speakers: Select sound output from the TV speakers or external audio equipment.

Headphone/Audio Out: Sets the sound output to headphone, external audio systems or Active Subwoofer connected to the TV. Disconnect headphone from the TV when you select [Audio out (Fixed)], [Audio out (Variable)] or [Subwoofer]. Audio out (Fixed)The audio output of the TV is fixed. Use your audio receiver’s volume control to adjust the volume (and other audio settings) through your audio system.Audio out (Variable)When using an external audio system, volume output from audio out can be controlled using the TV’s remote control.

Headphone Speaker Link: Switches the TV’s internal speakers on/off when you connect headphone to the TV.

Headphone Volume: Adjusts the volume of the headphone. Note • This option is not available, when

[Headphone/Audio Out] is set to [Audio out (Fixed)], [Audio out (Variable)] or [Subwoofer].

Subwoofer: To enable, set [Headphone/Audio Out] to [Subwoofer].Subwoofer Level

Adjust subwoofer volume level.PhaseSelect the phase polarity.Subwoofer SyncAdjusts the time lag of Subwoofer sound.

Digital Audio Out: Sets the audio signal that is output by connecting using digital audio output (optical)* cable or HDMI cable.* Only on limited region/country/TV modelAuto 1Output compressed audio without change.Auto 2

Output only compressed audio for multichannel content without change.PCMAlways output in PCM.

20GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


TV Position: Improves the speaker settings when set as [Table-Top Stand] or [Wall Mount] according to your TV’s position.

HDMI Signal Format StandardStandard HDMI format for normal use.EnhancedSet only when using devices supporting HDMI 2K HDR (High Dynamic Range) format.Note • HDMI IN 1 and HDMI IN 2 signal format

changes at the same time.• Change to [Standard] if the picture and

sound do not output correctly in [Enhanced].

• Some contents may not be displayed as 2K HDR when 4K HDR contents playback from a source device.

BRAVIA Sync Settings Allows the TV to communicate with equipment that is compatible with the BRAVIA Sync Control function, and connected to the HDMI ports of the TV. Note that communication settings must also be made on the connected equipment.

BRAVIA Sync Control: Sets whether or not to link the operations of the TV and the connected equipment that is compatible with BRAVIA Sync Control. When set to [On], the following functions are available. If the specific Sony equipment that is compatible with BRAVIA Sync Control is connected, this setting is applied to the connected equipment automatically.

Auto Devices Off: When set to [On], the connected equipment that is compatible with BRAVIA Sync Control turns off when your TV goes to standby mode.

Auto TV On: When set to [On], the TV turns on when you turn on the connected equipment that is compatible with BRAVIA Sync Control.

BRAVIA Sync Device List: Displays a list of connected equipment that is compatible with BRAVIA Sync Control. Select [Enable] to update the [BRAVIA Sync Device List].

Device Control Keys: Select button functions of the TV’s remote control to operate the connected equipment. None Deactivates the control by the TV’s remote control. Normal For basic operations, such as navigation buttons (up, down, left or right, etc.).Tuning Keys For basic operations and operation of channel-related buttons, such as PROG +/– or (0-9), etc. Useful when you control a tuner or set-top box, etc.; via the remote control.

Menu Keys For basic operations and operation of the HOME/OPTIONS buttons. Useful when you select menus of a BD player, etc.; via the remote control. Tuning and Menu Keys For basic operations and operation of channel-related buttons and HOME/

OPTIONS buttons. Note• Some equipment with [BRAVIA Sync

Control] does not support the [Device Control Keys] feature.

Customer Support Provides information of your TV’s model, software, and others. For details, see page 22.

21GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


Eco

Reset Resets the current Eco settings to the default values.

Power Saving Reduces power consumption of the TV by adjusting the backlight. When you select [Picture Off], the picture is switched off. The sound remains unchanged.

Idle TV Standby Turns the TV off after it has been kept idle for the preset length of time.

Network Setup(Except KLV-32R422G)

View Network setting and statusDisplays network setting and status.

Set up network connection Allows you to set up the network connection.

Customer Support

Model Name Displays model name of your TV.

Software Version Displays current software version of your TV.

External Inputs View Video Labels: Allows you to view or

manage the TV and external inputs.

Picture CheckView Test Picture: Allows you to check the

picture condition on the display.

Software UpdateUpdates the TV system using USB memory or via Network.

Note • Software update via the internet may vary

depending on your region/country/TV model.• To update the software, please visit Sony support

website.

Automatic Software Download (Except KLV-32R422G)Select [On] to download the software automatically. Select [Off] to disable it.

Factory Settings Resets all settings to factory settings. After completing this process, the initial setup screen is displayed.

Note • Be sure not to turn the TV off during this period (it

takes about 30 seconds) or press any buttons.

Initialize Personal Information (Except KLV-32R422G)You can erase your personal information stored in the TV.

Product Information Displays your TV’s product information.

Help Guide (Except KLV-32R422G)Help feature offers a lot of information about your TV.

Legal information (Except KLV-32R422G)Display the notices and licenses for software used in this television.

Help Guide(Except KLV-32R422G)

Help GuideHelp feature offers a lot of information about your TV.

22GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


Home Screen(Only on limited region/country/TV model

Recommendations Row

Select [On] or [Off] to display recommended contents.

Recent Channels

Select [On] or [Off] to display recently viewed channels.

23GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\070OPT.fm masterpage: Left

Connection DiagramYou can connect a wide range of optional equipment to your TV.

Note• Terminals and labels may vary depending on region/country/TV model.

KLV-50W672G / 43W672G

<

Audio System with ARC/HDMI Device

VCR/Video game equipment/DVD player/Camcorder

HDMI Device

Digital still camera/Camcorder/USB storage media

Headphone/Audio System/Subwoofer

Router

Cable/Antenna

14mm

24GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\070OPT.fm masterpage: Right

KLV-32W672G / 32W622G / 32R422G

<

Audio System with ARC/HDMI Device

VCR/Video game equipment/DVD player/Camcorder

HDMI Device

Digital still camera/Camcorder/USB storage media

Headphone/Audio System/Subwoofer

Router

Cable/Antenna

14mm

25GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\070OPT.fm masterpage: Left

USB 1/2

• Connecting a large USB device may interfere with other connected devices beside it.

• When connecting a large USB device, connect to the USB 1 port.

HDMI IN 1/2

• HDMI interface can transfer the digital video and audio on a single cable.

•

• HDMI IN 1 ARC (Audio Return Channel)

Connect your audio system to the HDMI IN 1 to route TV audio to your audio system. An audio system that supports HDMI ARC can send video to the TV, and receive audio from the TV via the same HDMI cable. If your audio system does not support HDMI ARC, an additional connection with DIGITAL AUDIO OUT (OPTICAL) is necessary.

AUDIO OUT /• Supports 3-pole stereo mini jack only.• To listen to the TV’s sound through the

connected equipment, press HOME, then select [Settings]* [System Settings] [Setup] [AV Setup] [Headphone/Audio out] and then select the desired item.


<

<

12 mm

21 mm

26GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\070OPT.fm masterpage: Right

Using Audio and Video Equipment

1 Turn on the connected equipment.

2 Press to display the input source.

3 Press / then to select the desired input source.The highlighted item is selected if 5 seconds pass without any operation.

Note• When connecting a digital audio system not

compatible with Audio Return Channel (ARC) technology using an HDMI cable, you need to connect an optical audio cable to the DIGITAL AUDIO OUT (OPTICAL)* to output digital sound.

• When connecting with an HDMI cable, be sure to use HighSpeed HDMI Cable with Cable Type Logo. (Recommended SONY Cable).

• When connecting mono equipment, connect the audio cable to the L (mono) jack.


To use BRAVIA Sync devicesWhen connecting the TV to BRAVIA Sync compatible equipment, you can control them together.Be sure to perform the necessary settings in advance. The BRAVIA Sync Control settings must be set on both the TV and the connected equipment. See [BRAVIA Sync Settings] (page 21) for the settings on the TV side. Refer to the connected equipment operating instructions for the settings on the connected equipment side.

Using Screen mirroring(Except KLV-32R422G)Screen mirroring displays the screen of a compatible device (e.g. smartphones) on your large TV screen by Miracast technology.No wireless router (or access point) is required to use this feature.

1 Press the / button, then select [Screen mirroring] using / buttons.

2 Operate the Screen mirroring compatible device to connect with the TV. Once connected, the device screen will be displayed on the TV.

To show connected devices/deregister device

When the waiting screen for the Screen mirroring is displayed, press OPTIONS, then select [Show Device List / Delete].To deregister a device, select the device in the list to delete, press . Then, select [Yes] in the confirmation display.

To display registration notification when

attempting to connect a device with the TV

Activating this function can avoid an unintended device from being connected.When the standby screen for Screen mirroring is displayed, press OPTIONS, then select [Registration Notification] [On].Note that once you decline registration request from a device, you will not be able to connect the device unless you delete it from the device list.

To change the band setting (for experts)

When the standby screen for Screen mirroring is displayed, press OPTIONS, then select [Band Setting].

Note• Connecting devices must conform to the following:Screen mirroring compatible devices:

2.4 GHz connection (5 GHz not supported).• For information about the supported wireless band of

your device, refer to the instruction manual of your device.

27GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\080ADD.fm masterpage: Left

Installing the TV to the WallUse the Wall-Mount Bracket (not supplied) to install the TV to the wall.• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient

expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight.

• The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket thickness. Please see below illustration.

Note• Be sure to store the removed screws in a safe place, keeping them away from children. • If the Table-Top Stand is attached to the TV, detach the Table-Top Stand beforehand. See the Setup Guide and follow

in reverse order the steps to detach the Table-Top Stand.• Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth when

removing the Table-Top Stand from the TV to prevent damaging the surface of the LCD display.

1 To detach the Table-Top Stand from the TV

2 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied)

Note• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.

Screw (M6)

Wall-Mount Bracket

TV’s rear cover

8 mm – 12 mm

Screw (not supplied)

Wall-Mount Bracket (not supplied)

Soft cloth

28GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\080ADD.fm masterpage: Right

TroubleshootingWhen the LED indicator is flashing red, count

how many times it flashes (interval time is

three seconds).

If the LED indicator flashes red, reset the TV by disconnecting the AC power cord (mains lead) from the TV for two minutes, then turn on the TV.If the problem persists, contact your dealer or Sony service centre with the number of times the LED indicator flashes red (interval time is three seconds). Press on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your dealer or Sony service centre.

When the LED indicator is not flashing, check

the items as follows.

If the problem persists, have your TV serviced by qualified service personnel.

No picture (screen is dark) and no sound

Check the antenna (aerial)/cable connection. Connect the TV to the AC power outlet (mains

socket), and press on the TV or the remote control.

No picture or no menu information from

equipment connected to the video input jack

appears on the screen

Press to display the connected equipment list, then select the desired input.

Check the connection between the optional equipment and the TV.

Double images or ghosting

Check the antenna (aerial)/cable connection, location or direction.

Only snow and noise appear on the screen

Check if the antenna is broken or bent. Check if the antenna has reached the end of its

serviceable life (three to five years in normal use, one to two years at the seaside).

Distorted picture (dotted lines or stripes)

Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optional equipment.

When installing optional equipment, leave some space between the optional equipment and the TV.

Check the antenna (aerial)/cable connection.

Keep the antenna cable away from other connecting cables.

Picture or sound noise when viewing a TV

channel

Adjust [AFT] (Automatic Fine Tuning) to obtain better picture reception. This function is for analogue TV channels only.

Tiny black points and/or bright points appear

on the screen

The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction.

Picture contours are distorted

Change the current setting of [Film Mode] to other settings (page 16).

No colour on programmes

Select [Reset] (page 15).

No picture from the connected equipment

appears on the screen

Turn the connected equipment on. Check the cable connection. Press to display the connected equipment

list, then select the desired input. Correctly insert the memory card or other storage

device in the connected equipment. Use a digital still camera memory card or other

storage device that has been formatted according to the instruction manual supplied with the digital still camera.

Operations are not guaranteed for all USB devices. Also, operations differ depending on the features of the USB device and the video being played.

Cannot select the connected equipment on

the menu or cannot switch the input

Check the cable connection.

No sound, but good picture

Press +/– or (Mute). Check if [Speakers] in [AV Setup] is set to [TV

Speakers] (page 20). Check if the headphone plug is connected to the

TV.

No sound or noisy sound

Check if the TV system setting is appropriate (page 16).

Picture

Sound

29GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


Some channels are blank

The channel is for scrambled/subscription service only. Subscribe to a pay TV service.

Channel is used only for data (no picture or sound).

Contact the broadcaster for transmission details.

What kind of devices can be connected to use

the Screen mirroring function?

Sony Screen mirroring compatible devices (Xperia) can be connected.

Video or sound sometimes cuts out

Devices emitting radio waves, such as other wireless LAN devices or microwave ovens, may interfere with the Screen mirroring function using wireless LAN. Keep the TV or Sony Screen mirroring compatible devices (Xperia) away from such devices, or turn them off if possible.

Communication speed may change according to the distance or obstacles between devices, device configuration, radio wave condition, line congestion or what device you use. Communication may cut out due to the radio wave condition.

Some pay contents cannot be played

The source device needs to be compatible with HDCP (High-bandwidth Digital Content Protection) 2.2/2.3 system. Some pay contents may not be displayed via a non-compatible source device.

Apps are inaccessible

Check that the LAN cable or AC power cord (mains lead) of the router/modem* has been connected properly.

* Your router/modem must be set in advance to connect to the Internet. Contact your Internet service provider for router/modem settings.

Update the Internet Content services, press HOME, then select [Settings]* →[System Settings]→[Setup] →[Network] →[Refresh Internet Content].

Try using apps later. The app content provider’s server may be out of service.

Sometimes video streaming quality is poor

when using the wireless LAN

The wireless network connection quality varies depending on the distance or obstacles (e.g. wall) between the TV and the wireless router (access point), environment interference, and quality of the wireless router (access point).

Wireless LAN connection fails or radio

reception conditions are poor

Check the installation location of the TV and wireless router (access point). Signal condition may be affected for the following reasons. Other wireless devices, microwaves,

fluorescent lights, etc., are placed nearby. There are floors or walls between the wireless

router (access point) and TV.If the problem persists even after checking the above, try making a wired LAN connection.

Poor picture on Internet Video

Quality depends on the original video provided by the internet content provider and your connection bandwidth.

Certain internet content displays a loss of

detail, especially during fast-motion or dark

scenes

Video quality and picture size depend on broadband speed and delivery by content providers.

Good picture quality but no sound on the

internet content

Quality depends on the original content provided by the internet content provider and your connection bandwidth.

Due to the nature of Internet video, not all videos will contain sound.

Your TV cannot connect to the server

Check the LAN cable or connection to your server and your TV.

Check if your network is properly configured on your TV.

A message appears stating that the TV cannot

connect to your network

Check the current network settings. Press HOME, then select [Settings]* t [System Settings] t [Setup] t [Network] t [Network Setup] t [View Network setting and status]. If all of your network settings are “-”, your server may not be connected properly. Check your network connections and/or server’s instruction manual for connection information.

Reconfigure your network settings.

Channels

Network

30GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


If the LAN cable is connected to an active server and the TV has acquired an IP address, check your media server’s connections and configurations.

Note Your IP address configuration can be viewed by

selecting the [View Network setting and status] option.

Media server is inaccessible although it is

listed under [Media] in the Home Menu

Check your LAN cable/connection or your server connections. The TV may have lost connection with the server.

Perform [Server Diagnostics] to check if your media server is properly communicating with the TV. Press HOME, then select [Settings]* t

[System Settings] t [Setup] t [Network] t [Home Network Setup] t [Server Diagnostics].

Note Connection to all media servers are not

guaranteed.

When using the renderer function, music files

cannot be played back

Some applications display a photo file pre-installed in the PC simultaneously with music playback when using the renderer function. Depending on the pre-installed photo file, music playback may not be possible, but may become possible by changing the photo file.

You could not connect Internet

Check that the LAN cable or AC power cord (mains lead) of the router/modem* has been connected properly.

* Your router/modem must be set in advance to connect to the Internet. Contact your Internet service provider for router/modem settings.

You do not have YouTube ID

If you do not have a YouTube ID and password, register them through the address below.http://www.google.com/device(You can also register a YouTube ID and password from your PC.)After registering your ID, you can use it immediately.

The TV turns off automatically (the TV enters

standby mode)

Check if the [Sleep Timer] is activated (page 19). Check if the [Duration] is activated by [On Timer]

(page 19) or [Photo Frame Settings] (page 19). Check if the [Idle TV Standby] is activated

(page 22).

Some input sources cannot be selected

Select [Video Labels] and select [Always] of the input source (page 20).

Some programmes cannot be tuned

Check the antenna (aerial)/cable connection.

The remote control does not function

Replace the batteries.

HDMI equipment does not appear on [BRAVIA

Sync Device List]

Check that your equipment is compatible with BRAVIA Sync Control.

Cannot select [Off] in [BRAVIA Sync Control]

If you have connected any audio system that is compatible with BRAVIA Sync Control, you cannot select [Off] in this menu. To change the audio output to the TV speaker, select [TV Speakers] in the [Speakers] menu (page 20).

The [Parental Lock] password has been

forgotten

Enter 9999 for the PIN code. Update PIN code by pressing HOME and select

[Settings]* t [System Settings] t [Parental Lock] t [Change PIN Code].

Store Display Mode or Promoting Feature

Logo appears on the screen

On the remote control, press RETURN then press HOME and select [Settings]* t [System Settings] t [Setup] t [Auto Startup]. Be sure to select [Home] in [Location].

The TV surrounds become warm

When the TV is used for an extended period, the TV surrounds become warm.You may feel hot when touching there by the hand.


General

31GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


Specifications

System

Panel systemLCD (Liquid Crystal Display) Panel, LED Backlight

TV systemDepend on your country/area selectionAnalogue: B/G, I, D/K, M

Colour/video systemAnalogue: PAL/SECAM/NTSC3.58/NTSC4.43

Channel coverageDepend on your country/area selectionAnalogue: UHF/VHF/Cable

Sound output (Only for 19.5 V supply)KLV-50W672G / 43W672G: 10 W + 10 WKLV-32W672G / 32W622G / 32R422G: 8 W + 8 W + 14 W

Wireless technology (Except KLV-32R422G)Protocol IEEE802.11b/g/n

Input/Output jacks

Antenna (aerial)/cable75 ohm external terminal for VHF/UHF

VIDEO IN Video input (phono jack)

AUDIO INAudio input (phono jacks)

HDMI IN 1/2 (HDCP 1.4-compatible)Video: 1080p (30, 50, 60 Hz), 1080/24p, 1080i (50, 60 Hz), 720p (30, 50, 60 Hz), 720/24p, 576p, 576i, 480p, 480i

PC input: (Horizontal × Vertical, Horizontal frequency, Vertical frequency)KLV-50W672G / 43W672G / 32W672G:640 × 480, 31.5 kHz, 60 Hz800 × 600, 37.9 kHz, 60 Hz1,024 × 768, 48.4 kHz, 60 Hz1,280 × 720*1, 44.8 kHz, 60 Hz1,280 × 1,024, 64.0 kHz, 60Hz1,152 × 864, 67.5 kHz, 75 Hz1,600 × 900, 55.9 kHz, 60 Hz1,680 × 1,050, 65.3 kHz, 60 Hz1,920 × 1,080*1, 67.5 kHz, 60 HzKLV-32W622G / 32R422G:640 × 480, 31.5 kHz, 60 Hz800 × 600, 37.9 kHz, 60 Hz1,024 × 768, 48.4 kHz, 60 Hz1,280 × 720*1, 44.8 kHz, 60 Hz

1,360 × 768, 47.7 kHz, 60 Hz1,152 × 864, 67.5 kHz, 75 Hz 1,600 × 900, 55.9 kHz, 60 Hz 1,680 × 1,050, 65.3 kHz, 60 Hz

Audio: Two channel linear PCM: 32/44.1/48 kHz 16/20/24 bits, Dolby Digital, Dolby Digital Plus, DTS

ARC (Audio Return Channel) (HDMI IN 1 only)Two channel linear PCM: 48 kHz 16 bits, Dolby Digital, Dolby Digital Plus, DTS

AUDIO OUT / (Stereo mini jack)Headphone, Audio output, Subwoofer

1, 2USB port 1 and 2 support High Speed USB (USB2.0)

DC IN 19.5 V AC adapter input

LAN (Except KLV-32R422G)10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection speed may differ. The communication rate and quality are not guaranteed.)

Others

Optional accessoriesWall-Mount Bracket: SU-WL450

Operating temperature0 ºC – 40 ºC

Power and others

Power requirements19.5 V DC with AC adapterRating: Input 100 V - 240 V AC, 50/60 Hz

Screen size (measured diagonally) (Approx.)KLV-50W672G: 50 inches / 125.7 cmKLV-43W672G: 43 inches / 108.0 cmKLV-32W672G: 32 inches / 80.1 cmKLV-32W622G / 32R422G: 32 inches / 80.0 cm

Power consumptionIndicated on the rear of the TV

Standby power consumption*2*3

0.5 W

Display resolutionKLV-50W672G / 43W672G / 32W672G: 1,920 pixels (horizontal) × 1,080 lines (vertical)KLV-32W622G / 32R422G: 1,366 pixels (horizontal) × 768 lines (vertical)

Output RatingUSB 1/2

5 V , 500 mA MAX

32GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)


Dimensions (Approx.) (w × h × d)

with Table-Top StandKLV-50W672G: 1,130 × 719 × 268 mmKLV-43W672G: 974 × 628 × 268 mmKLV-32W672G / 32W622G / 32R422G: 731 x 493 x 206 mm

without Table-Top StandKLV-50W672G: 1,130 × 660 × 68 mmKLV-43W672G: 974 × 572 × 68 mmKLV-32W672G / 32W622G / 32R422G: 731 x 442 x 70 mm

Mass (Approx.)

with Table-Top StandKLV-50W672G: 11.4 kgKLV-43W672G: 8.2 kgKLV-32W672G / 32W622G / 32R422G: 6.6 kg

without Table-Top StandKLV-50W672G: 11 kgKLV-43W672G: 7.8 kgKLV-32W672G / 32W622G / 32R422G: 6.3 kg

*1 The 1080p and 720p timing when applied to the HDMI input will be treated as a video timing and not PC timing for Wide mode.

*2 Specified standby power is reached after the TV finishes necessary internal processes.

*3 (Except KLV-32R422G) Standby power consumption will increase when your TV is connected to the network.

Note• Optional accessories availability depends on

countries/region/TV model/stock.• Design and specifications are subject to change

without notice.

Notes on HDR (High Dynamic Range) (Only on limited region/country/TV model)• Compatible with all HDR PS4 Game titles

via HDMI and HDR videos of built-in Netflix and YouTube App only. (See Sony support website for more information).

• HDR image signal specifically means HDR10 Media Profile format (commonly referred to as HDR10).

• Compatibility with all HDR content is not guaranteed.

Trademark information• The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

• Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.

• “BRAVIA”, and BRAVIA Sync are trademarks or registered marks of Sony Corporation.

• “Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo are trademarks of Blu-ray Disc Association.

• “PlayStation” is a registered trademark and “PS4” is a trademark of Sony Interactive Entertainment Inc.

• For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc.DTS, the Symbol, & DTS and the Symbol together are registered trademarks, andDTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

• TUXERA is a registered trademark of Tuxera Inc. in the US and other countries.

(Except KLV-32R422G)• Vewd® Core. Copyright 1995-2019 Vewd

Software AS. All rights reserved. • Wi-Fi®, Wi-Fi Alliance®, Wi-Fi Direct® and

Miracast® are registered trademarks of Wi-Fi Alliance.

• Wi-Fi Protected Setup™ is a trademark of Wi-Fi Alliance.

• The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance.

• Netflix is a registered trademark of Netflix, Inc.

• “YouTube” and the “YouTube logo” are registered trademarks of Google LLC.

• All other trademarks are the property of their respective owners.

33GB

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

D:\SONY TV\2019\SY19_SVW_PAA_IM_112\Final\Full Set\4748168112\090BCO.fm masterpage: BCO

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G 4-748-168-11(2)

© 2019 Sony Visual Products Inc.

Help Guide

http://rd1.sony.net/help/tv/ginl4/h_in/

Printed in India



Date post:	23-Dec-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

KLV-50W672G / 43W672G / 32W672G / 32W622G / 32R422G

Documents