Organisation Profile
KUSHWAHA INDUSTRIES
Office & Works Survey No. 219, Gate No. 2344, Near Bansal Bright Bar Company, Wagholi, Pune 412207 Tel: +91-7798880785 Email: [email protected] Web: http://www.kushwahaengineers.com
2014-15
3
INDEX
SN Description Page Number
1 Company Details 4
2 Organization Chart 5
3 Product Range 6 - 8
4 Manufacturing Facility 9 - 10
5 Proposed Major Machinery & Infrastructure 11
6 Quality Control 12
7 Inspection 13
8 Record of Major Supplies 14 - 15
8 Government Recognized Testimonials 16 - 20
9 Client Testimonial For Manufacturing 21 - 26
4
DETAILS
Name of the firm : Kushwaha Industries Registered office & Works S.no 219, Gat no 2344,p.no42 (part) Near Bansal Bright Bar Company Saisatyam Godown Area Wagholi, Pune-412207 Email: [email protected] om
Mr.V.N.Kushwaha – + 91-9422025778 Mr.D.C.Pawar - +91-7798880785
Mr.J.V. Ahire - +91-9960322558 Website : http://www.kushwahaengineers.com
E mail : [email protected] [email protected]
6
PRODUCT RANGE
Kushwaha Industries is a highly committed manufacturer of the following range of
products
Pressure Vessels
Our Industrial Pressure Parts are widely used in Power chemical, food,
pharmaceutical and various other industries. Today, we have carved a niche as one
of the prominent Manufacturer of Pressure parts based in India. (
Manufacture under the CODE OF IBR 1950 & ASME ). Our range of pressure parts
includes.
Deareator
Blow down Tanks, CBD, IBD
Storage & Vapour Tank
Feed Water Tank
Condensate Tank
Air Receiver
Filters Like Multi Grade, Sand Filter and
Calcite Filter etc.
Pressure Parts & Piping
All IBR & Non IBR piping as per requirements including piping design . Pressure
parts offered by us is ideal to hold Steam, gases as well as liquids at different
pressure ranges.
Boiler Bank Tubes
Super Heater & Intermediate Headers
Riser Down Comer
Steam Piping
Integral Piping
Feed Water Pipe Racks
All types of Supports for Piping.
7
Steam Coils
(Manufacture under the CODE OF IBR 1950 & ASME ). Our range of Coils includes.
Super Heater Coils
Evaporator Coils
Economiser Coils
Pipe Racks
Stainless Steel fabrication
We are fully equipped with a complete range of the fabrication of Stainless Steel
material of various grades such as
AISI 304,309, 410, 316, 321, 310
& SS 409 M.
Process Equipments
We have a complete In house designing team which customize the equipments as
per the site condition and client
requirement.
Juice Heaters
Evaporators
Pans
Crystallisers
Weighing Scales Etc...
8
Material Handling Equipment
We have a complete In house designing team which customize the equipments as
per the site condition and client requirement.
Our proprietary equipments are as under
Grass Hoppers
Bucket Elevators ( Chain & Belt Type )
Graders
Cane & Rake Carriers.
Belt Conveyers
EOT Cranes Etc...
Storage Bin with Weighing & Conveying System
We have a complete In house designing team which customize the Weighing system
as per the site condition and client requirement.
Round / Square Silo
Weighing Machine for 25 to 100 Kgs.
Bag Stitching Machine
Conveying system upto Godown.
HIGH PRESSURE N2 STORAGE TANK MANUFACTURED FOR
M/S. MAWENI LIME STONE, TANGA, TANZANIA
9
MANUFACTURING FACILITIES
The following manufacturing facilities are available at our works at Wagholi , Pune
1 LOCATION
15 km from Pune Office
10 km from Pune Airport
2 SIZE
Plot Area - 36000 sq ft.
Built Up Area - 8500 sq ft.
Open Area - 27500 sq ft
Office Area - 2500 sq ft.
Employees (including workers) - 70
3 MACHINERY
DESCRIPTION MAKE CAPACITY QTY
3.1 CUTTING
Air Plasma Cutting D & H 25 mm 1
Oxy-Acetylene Cutting set Esab - 7
PUG Cutting Esab - 4
Air Plasma Cutting Gerard 40 mm/25 mm 2
3.2 EDGE PREPARATION & GRINDING
Angle Grinder KPT/ Bosch AG7 6
Angle Grinder Bosch AG 5 / 4 12
Sander Grinder KPT SH 7 2
Pedestal Grinder 1 HP 2
10
3.3 TUBE / PLATE BENDING
Single axis Tube Bending M/C Electropneumatic 100 NCX 1
Plate Bending 2.0 m x 16 mm 1
Plate Bending 2.0 m x 12 mm 2
3.4 WELDING
MIG Welding Memco 400A 2
Welding Rectifier with Argon set D & H 400A 6
Welding Transformer Memco/D&H 300A 15
Electrode Heating Oven 5
3.5 MACHINE SHOP
Lathe Machine HMT 9 Ft. 1
Radial Drill (RM 63 ) HMT 60 mm 1
Pedestal Drill 20 mm 1
Portable Drill Wolf 20 /13 mm 3
Power Hack Saw 3
Tool Room Grinder 0.75 HP 1
3.6 MATERIAL HANDLING
EOT Crane 15 Ton 1
Chain Pulley Blocks INDEF 5, 3 &1 Ton 4
Hydraulic Mobile Crane ESCORTS 12 Ton 3
Lifting Frames, Chains & Shackles are available for heavier
jobs
3.7 UTILITIES
Air Compressor Crompton 8 bar 1
Air Compressor Crompton 7 bar 1
D.G. Set Cummins 62 KVA 1
Hydro test Pump Mercury 40 Bar 1
11
PROPOSED MAJOR MACHINERY
No. Description
1. Horizontal Boring machine 80 mm spindle diameter
2. Centre Lathe DIA 1500 mm x 6 mtr.
3. CNC Profile cutting machine
OTHER INFRASTUCTURE
No. Facility Description
1. Office Location Office is located at heart of the city, accessible from anywhere and transportation is available any time
2. Computer
Systems Networked IT Infrastructure with necessary number of
Desktop’s Laptop’s and printers
3. Connectivity 2 mbps Broadband line for world wide web connectivity
4. Communication Group Mobile facility at site
ISD/STD Telephone, Fax, Internet, Xerox facilities at office
Note: Kushwaha Engineers is capable and is ready to invest in machine tools as per client’s requirement and specifications.
12
QUALITY CONTROL
Measuring Instruments:
No Instruments Size
1. Dial Vernier 0-300 mm
2. Micro Meter 0-200 mm
3. Dial Gauge 0 – 10 mm
4. Steel Rule 300 -3000 mm
5. Master Level
6. Straight Edge 3000 mm
7. Measuring tape 3 - 30 mtr.
Non-Destructive Testing (NDT):
No Type Source
1. Die-Penetrate test In-house
2. Ultrasonic Testing (UT) Out-sourced as per requirement
3. Magnetic Particle Test (MT) Out-sourced as per requirement
4. Radiography Test (RT) Out-sourced as per requirement
Stress relieving:
No Type Source
1. Stress relieving Electric resistance /Furnace/ Vibratory stress relieving can be out-sourced as per requirement
Cleaning
No Type Source
1. Shot Blasting Machine Out-sourced as per requirement
Painting / Coating
Sr.No Type Source
1. Spray panting Machine In house
13
INSPECTION
Mechanical Properties Test:
Mechanical Properties test specimen and method shall be performed in accordance
to IS standard / Manufacturers standard / Clients requirement and the same will be
tested in reputed “NABL” approved / government approved laboratories.
Chemical Properties Test:
Chemical Properties test specimen and method shall be performed in accordance to
IS standard / Manufacturers standard / Clients requirement and the same will be
tested in reputed “NABL” approved /government approved laboratories.
Heat Treatment:
Heat treatment shall be done as per Client’s requirement
Mill Sheet:
Mill sheet for mechanical properties and chemical composition shall be furnished as
per requirement.
In process Inspection:
Stage wise Inspection as per Approved QA Plan.
14
RECORD OF MAJOR SUPPLY BY KUSHWAHA INDUSTRIES
Sr. No
CLIENT PROJECT EQUIPMENT QUANTITY/ WEIGHT
1 OLAM Agro Industries Barwani (MP) SS Hopper 1500 Wide - 3 Nos
2 Hemaras Industries Ltd Kolhapur (Mah.) SS Hopper 2000 Wide - 3 Nos
3 Sant Muktai SSK Ltd Mukatai nagar( Mah.) Hopper Tray 1500 Wide - 3 Nos
4 Shri Samarth SSK Ankushnagar ( Mah.) Hopper Tray 2000 Wide - 3 Nos
5 Shri Bhogawati SSK Parite ( Mah. ) Hopper Tray 2000 Wide - 2 Nos
6 Maweni Lime Stone
Tanga, Tanzania Tanga; TANZANIA
N2 Storage Pressure
Vessel
Dia 2100 x 11 Mtr Lg –
2 Nos
7 Mitibwa Sugar Estaes Ltd Tanzania
TANZANIA Catchall for 60 Ton pan 60 Ton - 1 no
8 Kantha Sugar Olpad; (Gujarat) IBR Steam Piping
Mill, Fiberizer,Power
turbine, HP & exhaust piping
9 NHEC Ttriveni, Uniworld(TN ) S.S. Massecute feeding
& Syrup seperator 9 Set
10 Kantha Sugar Olpad; (Gujarat) IBR Boiler Tubing For 32 ton Boiler - 2 nos
11 Baghauli Sugar & Distl.
Ltd. Baghauli (U.P.)
IBR H.P. , L.P. & Exaust
Piping
for 25 T. Boiler, Co-gen.
& Distiliery
12 Uttam Sucrotech Wonji-Shoha ETHIOPIA Structur for Sugar Silo &
Grader 125 Ton
13 NHEC Chincholi ( Karnataka ) Structure 400 Ton
14 NHEC Chincholi ( Karnataka ) Structure & Ducting 150 Ton
15 NHEC Baghauli ( UP ) Structure & Ducting 150 Ton
16 NHEC Baghauli ( UP ) IBR HP & LP Piping for 25 T. Boiler, Co-gen.
& Distiliery
17 Forbes & Company IOCL ( Mah ) Turbine & Gear Box
Frames 16 Ton
18 Forbes & Company IFFCO ( Mah) Turbine & Gear Box Frames
10 Ton
19 NHEC Tendaho - ETHIOPIA Juice Heater 440 Sq. Mtr
HAS 440 Sq. mtr. -2 Nos.
20 NHEC Isgec - SUDAN Centrifugal M/c. S.S. Parts
3 Set
21 NHEC Tokai ( Mah) Semikestner 1000 Sq m. H.S.A. - 1 No
22 NHEC Chhatrapati ( Mah) Evaporator 900, 400 Sq. mtr.H.S.A. –
1 No Each
23 NHEC Tokai ( Mah) Evaporator 900, 400 Sq.m , H.S.A. – 1 No Each
24 NHEC Bhadrawati(Karnattaka) Grass Hopper 2000 wide – 1 no.
25 NHEC Tokai ( Mah) Structure 100 Ton
26 NHEC Tokai ( Mah) Ducting 100 Ton
15
Sr. No
CLIENT PROJECT EQUIPMENT QUANTITY/ WEIGHT
27 NHEC Tokai ( Mah) Mill Gearing Base 10 Ton
28 NHEC Chhatrapati ( Mah) Mill Gearing Base 10 Ton
29 NHEC Vietnam Shredder Frame 25 Ton - 1 Set
30 Jay Mahesh Sugar Majalgaon ( Mah) Vertical Crystelliser 250 Ton – 1 No.
31 NHEC Tendaho ETHIOPIA IBR Super Heater Coil 2 Set
32 NHEC Tokai ( Mah) Juice Heater 120 & 200 Sq. mtr.
H.S.A. - 5 Nos
33 NHEC Chhatrapati ( Mah) Juice Heater 120 & 200 Sq. mtr. H.S.A. - 5 Nos
34 Loknete Baburao patil Agro Industries Ltd
Mohol ( Mah ) Grass Hopper 2000 Wide – 2 Nos
35 NHEC Chhatrapati ( Mah) Hopper, Grader,
Elavator. 15 Ton / Hr. - 1 Set
36 NHEC Tokai ( Mah) Hopper, Grader,
Elavator. 15 Ton / Hr. - 1 Set
37 NHEC Mysore ( karnataka ) Melter & Elavator. 15 Ton / Hr. - 1 no Each
38 W. I. Ltd. Indreshwar,Barshi (Mah)
Cane/ Bugasse Carriers & Bagasse Elevators
for 2500 TCD
39 W. I. Ltd. Indreshwar,Barshi (Mah)
Structure 300 Ton
40 NHEC Chhatrapati ( Mah) Structure 200 Ton
41 NHEC Chhatrapati ( Mah) Ducting 150 Ton
42 NHEC Pune ( Mah ) Structure for C/F. M/C 150 Ton
43 NHEC Chengalrayan ( T. N. ) Grass Hopper 2000 Wide – 2 Nos
44 NHEC Dharampuri ( T. N. ) Grass Hopper 2000 Wide – 2 Nos
45 W. I. Ltd. Akluj ( Mah ) Structure 50 Ton
46 NHEC Vijaynagar ( Karnataka) Vapour Piping 100 Ton
47 West Kenya SugarCo. Ltd KENYA Hopper, Grader,
Elavator.
15 Ton / Hr.; 1500 Wide
– 2 nos
48 Uttam power & Steel Khopoli ( Mah ) Ash Silo 112 Ton
27
More information, please visit
http://www.kushwahaengineers.com or
mail us [email protected]
© 2011, Kushwaha Engineers. All rights reserved. The contents of this document
are the property of Kushwaha Engineers. No part of this work may be reproduced
or transmitted in any form or by any means, except as permitted in written license
agreement with Kushwaha Industries. has made every reasonable attempt to ensure
the completeness and accuracy of this document. However, the information
contained in this document is subject to change without notice, and does not
represent a commitment on the part of Kushwaha Engineers.