86
www.leister.com 87
Floo
ring
/ In
terio
r Dec
orat
ion
Flooring / Interior Decoration
UNIFLOOR E / UNIFLOOR S 88GROOVER 89
General Catalog Plastic Welding
www.leister.com88
115.054
115.057
114.224
115.342
103.394
103.602
126.448
Hot air welder
UNIFLOOR E / UNIFLOOR S
With UNIFLOOR E you can weld floor coverings made of PVC-P, PE,linoleum and modified thermoplastics, without any reconfiguration,up to 24.6 ft per minute. It is reliable, technically perfect and easy tohandle.
b Reproducible results thanks to digital display of set and actual values
b Electronically controlled heatingb Steplessly controlled air flow (only UNIFLOOR E)b All floor coverings welded without reconfigurationb Automatic startb Integrated wall switch
Accessories UNIFLOOR E
Technical DataVoltage V~ 120Power W 1800Temperature °F 68 – 1148Speed ft/min 3.3 – 24.6Air flow range % 50 – 100Size (L !W ! H) inch 16.5 ! 10.6 ! 8.5Weight lbs 24.2 (with 10 ft cord)Conformity marking 2Approval mark 3Certification scheme CCAProtection class I 1
Article No.: 115.024 UNIFLOOR E 120 V / 1800 W, squeezed nozzle, without plug, temperature in °C116.133 UNIFLOOR E 120 V / 1800 W, squeezed nozzle, without plug,temperature in °F115.038 UNIFLOOR S 120 V / 1800 W, squeezed nozzle, without plug, temperature in °C
Immaculate weld seams with the UNIFLOOR E (Vietnam).
Perfectly stowed away in the providedstorage case.
Welding rod de-reeler
Trolley attachment
Floor welding nozzle, optimised for PVC material
Floor welding nozzle, for PVC and PUR material
Floor welding nozzle air-knife, optimised for PUR material
Heating element, 120 V / 1800 W
Storage case 23.8 x 19 x 12.3 inchmulti-layer plate, green
(included in delivery)
General Catalog Plastic Welding
www.leister.com 89
102.401
102.402
102.404
102.403
102.405
102.406
126.448
Grooving machine
GROOVER
The grooving machine GROOVER cuts welding grooves into thick,tough floor coverings made of PVC-P, PE and linoleum. The tool glideson three rollers and cuts a uniform grooving depth, even at highspeeds.
b Groove cutting of all types of floor coveringsb Very high rotational cutting speed at two levelsb Adjustable guide roller for tracking accuracyb Particle and dust-free operation with an additional fan and dust bagb Milling as close to the edge possible
Accessories GROOVER
Technical DataVoltage V~ 120 / 230Power W 350 / 700 (2 levels)Speed rpm Level 1: 14 500 (350 W)
Level 2: 18 500 (700 W)Groove depth adjustment inch 0 – 0.16Size (L !W ! H) inch 9.4 ! 8 ! 10Weight lbs 14.8 (with 10 ft cord)Conformity marking 2Approval mark 3Certification scheme CCAProtection class II 4
Article No.: 108.395 Groover 120 V, tungsten carbide tipped blade " 4.33 x 0.14 inch,
trapezium profile, with US plug 111.032 Groover 230 V, tungsten carbide tipped blade " 4.33 x 0.14 inch,
round profile, with Euro plug 108.393 Groover 230 V, tungsten carbide tipped blade " 4.33 x 0.14 inch,
round profile, with Euro plug
Strong drive suitable for PVC, PUR andlinoleum materials.
Floo
ring
/ In
terio
r Dec
orat
ion
Tungsten carbide tipped blade " 4.33 × 0.14 inch, trapezium profile
Tungsten carbide tipped blade " 4.33 × 0.16 inch, round profile
Tungsten carbide tipped blade " 4.33 × 0.1 inch, round profile
Tungsten carbide tipped blader " 4.33 × 0.14 inch, round profile
Diamond cutting blade " 4.33 × 0.14 inch, semi-round profile
Storage case 23.8 x 19 x 12.3 inchmulti-layer plate, green
(included in delivery)
Tungsten carbide tipped blade " 4.33 × 0.11 inch, round profile
General Catalog Plastic Welding
www.leister.com10 General Catalog Plastic Welding
Hot Air Tool
TRIAC PID
Closed-loop control of temperature and function monitoring thanks tomicroprocessor. The popular hand tool for top quality results.
• Reproducible results thanks to digital display of set and actual values of temperature.
• Constant temperature independent of voltage fluctuations and environmental conditions.
• Adaptor tube heat protection• Electronic heating element protection • Motor shut-off at minimal carbon level
Hot Air Tool
TRIAC S
The reliable, cost-effective and proven hand tool with stepless temperature range adjustment.
• Adaptor tube with heat protection • Electronic heating element protection • Motor shut-off at minimal carbon level • Multiple replacements of carbon brushes possible
Technical DataVoltage V~ 120Power W 1600 Temperature °F 122 – 1112 Size (L × !) inch 13.4 × 3.5, handle ! 2.2 Weight lbs 2.4 (without 10 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCA Protection Class II 4
Article No.: 100.749 TRIAC PID 120 V / 1600 W for push-fit nozzles with US plug / UL100.750 TRIAC PID 120 V / 1600 W for screw-on nozzles with US plug / UL
Other versions available upon request.
Technical DataVoltage V~ 120Power W 1600Temperature °F 68 – 1292Size (L "!) inch 13.4 × 3.5, handle ! 2.2Weight lbs 2.4 (without 10 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCA Protection Class II 4
Article No.: 100.726 TRIAC S 120 V / 1600 W for push-fit nozzles with US plug / UL100.727 TRIAC S 120 V / 1600 W for screw-on nozzles with US plug / UL
Other versions available upon request.
www.leister.com 13General Catalog Plastic Welding
Hot
Air
Too
ls
Floors / interior design
Tubular nozzle ! 0.2 inch, push-fit
Version extra-strong
100.303
105.578
Speed weld nozzle 0.18 × 0.5 inch for fillet weld, push-fit on tubular nozzle ! 0.2 inch
107.139
Speed weld nozzle for tape welding 0.31 inch, push-fit on tubular nozzle ! 0.2 inch
107.137
Speed weld nozzle 0.12 inch, push-fit on tubular nozzle ! 0.2 inch
Speed weld nozzle 0.16 inch, push-fit on tubular nozzle ! 0.2 inch
Speed weld nozzle 0.2 inch, push-fit on tubular nozzle ! 0.2 inch
106.989
106.990
106.991
Sieve reflector 0.5 × 0.4 inch, push-fit on tubular nozzle ! 0.2 inch
107.324
Sieve reflector 2.0 × 1.4 inch, push-fit
107.337
Sieve reflector 1.4 × 0.8 inch, push-fit
107.338
Shell reflector 1.0 × 5.9 inch, push-fit
107.326
Spoon reflector 1.06 × 1.4 inch, push-fit
107.307
Soldering reflector 0.7 × 1.5 inch, push-fit
107.339
Tacking nozzle, push-fit on tubular nozzle ! 0.2 inch
106.996
Rotary burr ! 0.23 inch (for drilling machine)
106.997
Speed weld nozzle 0.22 inch, push-fit on tubular nozzle ! 0.2 inch
106.992
Shrinking / soldering / vehicle repairs
Speed weld nozzle 0.12 inch, with small air-slide, push-fit on tubular nozzle ! 0.2 inch
Speed weld nozzle 0.16 inch, with small air-slide,push-fit on tubular nozzle ! 0.2 inch
Speed weld nozzle ! 0.2 inch, with small air-slide, push-fit on tubular nozzle ! 0.2 inch
105.431
105.432
105.433
Extension nozzle ! 0.2 inch, 5.9 inch 106.982
Other versions available upon request.Technical data are subject to change without prior notice.
Heating element, 120 V / 1600 W, for TRIAC PID
Heating element,120 V, 1550 W, for TRIAC S
100.650
100.702
The TRIAC S hand tool, used for weldinglinoleum, equipped with a speed weldnozzle.
TRIAC PID: monitoring of welding tem-perature for top quality.
Using the TRIAC PID to weld a patch on abuilding site.
0.12
0.2
0.16
0.12
0.2
0.16
www.leister.com14
1
2
3
4
5
6
7
8
1 + 2
5
6
3 + 4
General Catalog Plastic Welding
Hot air tool
TRIAC BT
The TRIAC BT fulfills all of the functionality and design requirements necessary for successful plastic welding. Weighting just 2.2 pounds, it is the lightest in its class and is made from high-quality material. EveryTRIAC BT kit undergoes stringent quality inspections before leavingthe factory in Switzerland. The sturdy storage case includes everythingan expert technician requires.
Easy welding with the ergonomicpressure roller.
Temperature setting:Convenient and reliable temperature adjustment.
Accidental start-up protection:The temperature adjustment becomeslit-up if the power to the tool is interrupted.
Filter: The fine mesh air filter prevents dirt fromclogging the air inlet.
Filter cleaning:The air filters on both sides can be easily removed and cleaned.
Tool handle: Ergonomically designed handle with a soft grip covering for a secure hold.
Nozzle:Extra strong integral 5 mm universal nozzle.
Spare heating element:Protected, packed and within easyreach.
Storage case:Enough space for all the accessories the professional needs.
www.leister.com 17General Catalog Plastic Welding
Hot
Air
Too
ls
The TRIAC BT floor welding kit is ideal for the ambitious flooring technician.
• Light and easy to handle • Ergonomic handle for welding without strain • Electronically protected heating element • Integral tabular nozzle 0.2 inch • Built in start-up protection in the event of power interruption
Hot air tool
TRIAC BT floor welding kit Accessories TRIAC BT
107.139
105.431
105.432
105.433
136.918
116.586
137.855
138.902138.539
Well balanced design for precise welding of floor coverings.
106.989
106.990
106.991
Technical DataVoltage V~ 120 Power W 1550 Temperature °F 68 – 1292 Size (L × !) inch 14.6 × 3.5, handle ! 2.2 Weight lbs 2.2 (without 6.5 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCA, CBProtection Class II 4
Article No.: 136.940 TRIAC BT 120 V / 1550 W floor welding kit, with US plug
Included in delivery: TRIAC BT, two speed welding nozzles 0.2 inch (one with small air-slide for PUR materials), spare heating element, storage case
0.12
0.16
0.2
Included in delivery.
Speed welding nozzle, 0.18 x 0.5 inch, for fillet weld, push-fit on tabular nozzle ! 0.2 inch
Speed welding nozzle 0.12 inch with small air-slide, push-fit on tabular nozzle Speed welding nozzle 0.16 inch with small air-slide, push-fit on tabular nozzle Speed welding nozzle 0.2 inch with small air-slide, push-fit on tabular nozzle
Heating element, 120 V / 1500 W
Storage case for TRIAC BT, TRIAC PID, TRIAC S, ELECTRON
Leister cutter with four blades
10 x 10 spare blades hook shape10 x 10 spare blades trapezoid shape
Speed welding nozzle 0.12 inch, push-fit on tabular nozzle ! 0.2 inch Speed welding nozzle 0.16 inch, push-fit on tabular nozzle ! 0.2 inch Speed welding nozzle 0.2 inch, push-fit on tabular nozzle ! 0.2 inch
0.12
0.16
0.2
www.leister.com18 General Catalog Plastic Welding
Hot air tool
HOT JET S
The most compact hand tool from Leister. HOT JET S is a low weightof only 1.3 lbs, includes cord and slim handle. It ensures fatigue-freewelding with high performance.
• The smallest Leister hot-air tool • Electronic steplessly controlled temperature • Electronic steplessly controlled air flow • Low noise • Integrated flexible tool stand
Accessories HOT JET S
Technical DataVoltage V~ 120Power W 460Temperature °F 68 – 1112Size (L × !) inch 9.3 × 2.8, handle ! 1.6Weight lbs 0.9 (without 10 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCAProtection Class II 4
Article No.: 100.861 HOT JET S 120 V / 460 W with US plug100.859 HOT JET S 120 V / 460 W with US plug (UL)
Other versions available upon request.
107.141
107.142
107.144
105.556
106.996
105.567
106.989
106.990
106.991
106.992
106.993
Profile A Profile B
105.431
105.432
105.433
Heating element,230 V~ / 1550 W
Leister-Cutter, mit 4 Ersatzklingen
Wide slot nozzle 0.6 inch, angled, push-fit
Wide slot nozzle 0.8 inch, angled, push-fit
Tubular nozzle ! 0.2 inch, push-fit
Extension nozzle ! 0.2 x 6.0 inch, straight
Angled nozzle 0.8 inch, 90° angled, push-fit
Tacking nozzle, push-fit on tubular nozzle ! 0.2 inch
Speed welding nozzle 0.12 inch, push-fit on tubular nozzle ! 0.2 inch Speed welding nozzle 0.16 inch, push-fit on tubular nozzle ! 0.2 inch Speed welding nozzle 0.2 inch, push-fit on tubular nozzle ! 0.2 inch
Speed welding nozzle 0.22 inch, push-fit on tubular nozzle ! 0.2 inch, A profile
Speed welding nozzle 0.28 inch, push-fit on tubular nozzle ! 0.2 inch, B profile
Speed welding nozzle 0.12 inch, with small air-slide, push-fit on tubular nozzle ! 0.2 inch Speed welding nozzle 0.16 inch, with small air-slide, push-fit on tubular nozzle ! 0.2 inch Speed welding nozzle 0.2 inch, with small air-slide, push-fit on tubular nozzle ! 0.2 inch
0.280.22
0.15 0.2
0.12
0.2
0.16
0.12
0.2
0.16
www.leister.com 19General Catalog Plastic Welding
Hot
Air
Too
ls
107.137
107.139
107.324
107.146
107.151
107.148
107.305
107.310
107.311
107.312
Fitting a solder shrink connection with theHOT JET S and a push-fit sieve reflector.
The HOT JET S is especially suited tocarry out work in areas which are difficultto access.
The small and light HOT JET S works also inclose corners.
103.607
Speed welding nozzle 0.31 inch, for tape welding , push-fit on tubular nozzle ! 0.2 inch
Speed welding nozzle 0.18 × 0.5 inchfor fillet weld, push-fit on tabular nozzle ! 0.2 inch
Sieve reflector 0.5 × 0.4 inch, push-fit on tubular nozzle ! 0.2 inch
Soldering nozzle ! 0.2 inch
Soldering nozzle ! 0.16 inch
Soldering nozzle ! 0.12 x 0.06 inch,oval
Sieve reflector 1.4 × 0.8 inch, push-fit
Sieve reflector 2.0 × 1.4 inch, push-fit
Spoon reflector 1.0 × 1.2 inch, push-fit
Ironing nozzle 0.6 x 1.0 inch
Heating element, 120 V / 435 W
www.leister.com20 General Catalog Plastic Welding
Hot air tool
GHIBLI
Derived from a hot desert wind – GHIBLI certainly lives up to its name!Thanks to two-step airflow switching and steplessly adjustabletemperature, it can be used for the most diverse applications.
• Universal tool for welding and shrinking• Welding results independent of voltage fluctuations and
ambient temperature• Two-step selectable airflow• Extensiv range of accessories
Accessories GHIBLI
Technical DataVoltage V~ 120Power W 1500Temperature °F 68 – 1112Size (L × W × H) inch 7.7 × 3.3 × 6.3, handle ! 2.2Weight lbs 2.0 (without 10 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCAProtection Class II 4
Article No.: 101.887 GHIBLI 120 V / 1500 W with US plug101.891 GHIBLI 120 V / 1500 W with US plug (UL)
Other versions available upon request.
106.998
106.999
107.154
107.006
107.308
107.309
107.313
107.325
107.319
107.315
107.007
107.345
101.850
Simple heating up fibre optic loose tubecables for further processing.
Welding pipes.
Wide slot nozzle 0.8 inch, angled, push-fit
Wide slot nozzle 1.6 inch
Tubular nozzle ! 0.2 inch, angled,push-fit
Extension nozzle ! 0.2 x 5.1 inch, straight
Sieve reflector 2.0 × 1.4 inch, push-fit Sieve reflector 1.4 × 0.8 inch, push-fit
Spoon reflector 1.0 × 1.2 inch, push-fit
Soldering reflector 0.7 × 1.3 inch, push-fit
Sieve reflector ! 2.6 inch, push-fit
Folding reflector 2.8 × 0.5 inch, push-fit
De-horning nozzle, push-fit
Welding mirror 5.3 inch, PTFE-coated
Heating element, 120 V / 1500 W
www.leister.com 21General Catalog Plastic Welding
Hot
Air
Too
ls
The handy, quiet and compact hot-air tool for universal use. It is appliedin fields as shrinking, vehicle labeling, forming, heating. Its balanceddesign allows strain-free welding. Excellent price/performance ratio.
• Light and compact• High stability in head-handle position for long term use• Balanced ergonomics with soft grip • Very quiet tool, ideal for indoor use • Constant temperature and closed-loop controlled electronics
Hot-air tool
SONORA S1 kit Accessories SONORA S1
Technical DataVoltage V 120Power W 1500Temperature ºF 176 – 1202Size inch 9.1 x 7.9Weight lbs 1.3 (without 6.5 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCAProtection Class II 4
Article No.: 140.997 SONORA S1 kit,120 V / 1500 W with US plug
Other versions available upon request.
119.269
119.270
119.314
119.271
119.316
119.315
119.312
107.324
107.308
Shrinking of cable labels Ergonomic design for strain-free carwrapping.
Included in delivery.
Glass protection nozzle
Wide slot nozzle 2.0 inch, push-fit
Reducer nozzle, push-fit (Included in delivery)
Reflector nozzle, push-fit (included in delivery)
Tubular nozzle 0.2 inch, push-fit
Wide slot nozzle 0.8 inch, push-fit
Solder sleeve reflector nozzle, push-fit (included in delivery)
Sieve reflector 0.5 x 0.4 inch, push-fit on tabular nozzle ! 2.2 inch
Sieve reflector 2.0 x 1.4 inch, push-fit
www.leister.com22 General Catalog Plastic Welding
Hot air tool
ELECTRON
Powerful and versatile, the ELECTRON is the tool on every spicialists’wishlist.
• Powerful • Compact • Robust • Construction site tried and tested
Accessories ELECTRON
Technical DataVoltage V~ 120 / 230 / 400 Power W 2700 / 3400 / 5500Temperature °F 68 – 1200Size (L !") inch 12.6 ! 3.7, handle " 2.5Weight lbs 2.8 (without 10 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCAProtection Class II 4
Article No.: 110.889 ELECTRON 120 V / 2700 W with 32A UK plug 107.791 ELECTRON 120 V / 2700 W, without plug107.781 ELECTRON 230 V / 3400 W with Euro plug116.055 ELECTRON 230 V / 3400 W with scraper nozzle, with Euro plug107.788 ELECTRON 400 V / 5500 W, with 16A CEE plug
Other versions available upon request.
For welding of bitumen sheets, use thepowerful ELECTRON with wide slot nozzle.
107.258
107.266
116.753
107.270
107.229
107.331
107.327
107.333
107.340
107.328
Wide slot nozzle, push-fit 2.8 × 0.4 inch, for bitumen
Wide slot nozzle 2.9 × 0.12 inch, push-fit,
with tool stand (Article 116.753)
Tool stand
Wide slot nozzle 5.9 × 0.5 inch, push-fit
Round nozzle 0.8 inch, push-fit
Folding reflector 2.8 × 2.8 inch,push-fit
Sieve reflector 3.3 x 3.3 iunch, push-fit
Sieve reflector 5.9 x 5.1 inch, push-fit
Shell reflector, 1.8 x 9.8 inch, push-fit
Folding reflector 2.3 × 2.9 inch,push-fit
www.leister.com 23
Hot
Air
Too
ls
General Catalog Plastic Welding
Accelerating the drying process of varnish, paint and body filler using theELECTRON.
ELECTRON with scraping nozzle. Scraping color without solvent!
106.127
107.330
116.054
105.961
107.347
107.346
107.348
113.269
101.273
103.588
Sieve reflector ! 2.6 inch, push-fit
Folding reflector 4.9 × 0.85 inch, push-fit
Scraper nozzle, (only use in combination with heatertube, article no. 116.053)
Sword-shaped nozzle 1.8 x 0.5 x 13.8 inch, push-fit,for foundries
Sword-shaped nozzle 2.9 x 0.5 x 20.5 inch, push-fit,edges rounded, PTFE-coated
Welding mirror 10.6 inch, push-fit
Tool rest
Heating element, 230 V / 3400 W
Heating element, 400 V / 5500 W
Heating element, 120 V / 2600 W
www.leister.com 31General Catalog Plastic Welding
Hot
Air
Too
ls
Hot air tools
General accessories
The hand roller is an essential accessoryfor tunnel applications.
Roofing Billboards / Tarpaulins
Pressure roller 1.6 inch with ball bearings (silicone)
5 spare silicones
140.160
140.599
Pressure roller 1.6 inch with ball bearings (silicone)
5 spare silicones
140.160
140.599
Pressure roller 1.1 inch with ball bearings (silicone)
5 spare silicones
140.161
140.598
Pressure roller 3.1 inch (silicone) 106.974
Leister cutter with four blades
10 x 10 spare blades hook shape10 x 10 spare blades trapezoid shape
137.855
138.902138.539
Storage case, for TRIAC BT, TRIAC PID,TRIAC S, ELECTRON
116.586
Pressure roller 1.1 inch with ball bearings (silicone)
5 spare silicones
140.161
140.598
Pressure roller, with ball bearings (brass)
106.972
Pressure roller 1.1 inch (PTFE) 106.976
Seam probe tester 138.314
Chamfer plane with ten spare blades
Spare blades kit containing ten blades
111.346
111.348
Leister cutter with four blades
10 x 10 spare blades hook shape10 x 10 spare blades trapezoid shape
137.855
138.902138.539
Storage case, for TRIAC BT, TRIAC PID,TRIAC S, ELECTRON
116.586
Brass brush 116.798
106.981 Pressure roller for custom seal
Pressure roller 3.1 inch (silicone) 106.974
www.leister.com32 General Catalog Plastic Welding
Leister cutter with four blades
10 x 10 spare blades hook shape10 x 10 spare blades trapezoid shape
137.855
138.902138.539
Storage case for TRIAC BT, TRIAC PID,TRIAC S, ELECTRON
116.586
Plastic fabrication
Tool rest for TRIAC PID, TRIAC S107.348
Floorings / Interior decoration
Leister cutter with four blades
10 x 10 spare blades hook shape10 x 10 spare blades trapezoid shape
137.855
138.902138.539
Pressure roller, with ball bearings (brass)
106.972
Pressure roller 1.1 inch (PTFE) 106.976
106.969 Spatula
Trimming guide, to use with spatula (106.969)
122.541
Spare blades for hand grooving tool106.968
Hand grooving tool106.966
Storage case for TRIAC BT, TRIAC PID,TRIAC S, ELECTRON
116.586
Civil Engineering / Tunnel / Landfill sites
Pressure roller 1.1 inch with ball bearings (silicone)
5 spare silicones
140.161
140.598
Pressure roller 1.1 inch (PTFE) 106.976
Pressure roller 1.6 inch with ball bearings (silicone)
5 spare silicones
140.160
140.599
Storage case for TRIAC BT, TRIAC PID,TRIAC S, ELECTRON
116.586
Hot air tools
General accessories
Leister cutter with four blades
10 x 10 spare blades hook shape10 x 10 spare blades trapezoid shape
137.855
138.902138.539
Pressure roller 1.6 inch with ball bearings (silicone)
5 spare silicones
140.160
140.599
Pressure roller 1.1 inch with ball bearings (silicone)
5 spare silicones
140.161
140.598
Pressure roller 3.1 inch (silicone) 106.974
www.leister.com 33General Catalog Plastic Welding
Hot
Air
Too
ls
Profile sizes
Welding rods
Diameters in inchProfile A
Profile B
Article packagingunits (lbs)
Welding accessories PE
104.283 Welding rod HDPE, profile A, black 6.6
104.294 Welding rod HDPE, profile A, white 6.6
104.284 Welding rod HDPE, profile B, black 11
104.299 Welding rod HDPE, profile B, white 11
106.650 Welding band HDPE, 0.32“ x 0.08“, white 2.2
104.300 Welding rod LDPE, profile A, black 6.6
Welding accessories PP
104.287 Welding rod PP, profile A, grey / beige 6.6
104.301 Welding rod PP, profile A, black 6.6
104.288 Welding rod PP, profile B, grey / beige 11
126.356 Welding band PP, 0.32“ x 0.08“, natural 4.4
Welding accessories PVC
104.296 Welding rod PVC-U (hard), profile A, transparent 6.6
104.278 Welding rod PVC-U (hard), profile A, grey 6.6
106.641 Welding rod PVC-U, profile A, brown 6.6
104.280 Welding rod PVC-U (hard), profile B, brown 11
104.279 Welding rod PVC-U (hard), profile B, grey 11
104.302 Welding rod PVC-P (soft), profile A, transparent 6.6
Welding accessories ABS
104.295 Welding rod ABS, profile A, white 6.6
113.587 Welding rod ABS, profile A, black 6.6
107.027 Welding band ABS, 0.32“ x 0.08“, white 2.2
Article packagingunits (lbs)
Welding accessories div.
104.297 Welding rod PA, profile A, black 6.6
104.298 Welding rod PC, profile A, transparent 6.6
104.313 Welding rod PC / ABS/ALPHA (Honda), profile A, black 6.6
104.311 Welding rod PC / PBTP (Xenoy), profile A, grey 6.6
104.309 Welding rod PS, profile A, white 6.6
104.308 Welding rod PUR, profile A, black 6.6
106.654 Welding band Xenoy, 0.32“ x 0.08“, grey 4.4
106.642 Welding rod PPs, profile A, grey, flame resistant 6.6
104.304 Welding rod PVDF, profile A, natural 6.6
104.303 Welding rod POM, profile A, natural 6.6
Test bundles
107.036 Test bundle bodywork welding rods, each consisting ofprofile A pieces of 14.6 inch single marked6x HDPE, 6x PP, 6x PA, 6x PC, 6x ABS, 6x PCABS / APLHAHonda, 6x PC / PBTP / Xenoy
107.037 Test bundles standard each consisting of profile A pieces of 14.6 inch single marked 5x PVC-U, 5x PVC-P, 5x PP, 5x ABS, 5x HDPE, 3x PC, 3x PA,3x POM, 3x LDPE, 3x PC / ABS / ALPHA Honda,3x PC / PBTP / Xenoy
107.040 Test bundle welding band each consisting of profile A pieces of 14.6 inch single marked 9x HDPE 0.32“ x 0.08“ white, 9x PP, 0.32“ x 0.08“ natural,9x ABS 0.32“ x 0.08“ white, 9x PC / PBTP / Xenoy grey
0.22
0.15
0.28
0.2