2
Model 2000 -Pedestal Mount Model 3000 -Floor Mount Taurus 3000 18’ wide model shown with optional equipment Taurus Models 2000 and 3000 The Taurus is C&G Systems’ precision, large-format machine series. The Taurus line is designed for use with the latest in today’s Precision Plasma cutting systems as well as multi-head oxy-fuel applications. With pedestal or floor mounted rails, Taurus is available in standard widths from 5’ (1.5M) to 24’ (7.3M), and can be extended to over 150’ (45M) in length. Plasma & Oxy-Fuel Cutting This large format machine is capable of carrying up to ten cutting stations. Taurus can be equipped with up to 4 Plasma stations with power to 1,000 amps. Up to 8 Oxy- fuel stations with automatic ignition can be installed for maximum productivity. Heavy Duty Frame & Rail System Rugged frame and rail system components are designed to perform in the most demanding environments. Large structural steel tubing is welded together to form the end trucks and cross axis beam. Mating assembly surfaces are precision machined and ground for maximum accuracy. Large diameter crowned and hardened truck wheels glide over precision machined, tongue-in-grooved sections of hardened 90# Tee-Rails. Precision AGMA gear rack insures repeatability and accuracy throughout the entire cutting envelope. Precision Controls The Taurus line comes standard with a PC-based Burny 10 LCD Plus CNC controller. Dual-stage planetary gear- heads with Helicamber gear technology mounted directly to 750 Watt SERCOS high-torque servo motors, provide exacting motion control and ultra smooth cut surfaces. Digital SERCOS interfaced amplifiers insure accurate control of machine motion from 1-900 IPM (.03 - 22.9 M/min.). Torch Height Control Taurus is equipped with an Inova plasma torch height control system. Pierce height is precisely set each time the arc starts. The high-resolution (+/-4V) arc voltage regulator controls and constantly maintains the torch-to- work distance during cutting to optimize the quality and finish of your plasma cut parts. Arc voltage set point, pierce height, cut height and retract distance are all displayed and adjusted on the Inova’s LCD touch screen. Options C&G Systems offers a full line of options to configure and customize your Taurus with. Options include: motorized oxy-fuel stations with automatic ignition, plate marking system, air or water cutting tables, heat shields, exhaust systems, dedicated compressor systems, professional CAD/CAM, and nesting software packages. Large Format Plasma & Oxy-Fuel Cutting Machine Your Best Value in Precision Shape Cutting Systems. Call C&G Systems at (630) 467-0600 to consult with a sales representative today, or visit us on the web at www.cgsystems.com.
