LED controller
20m
m
135mm
128mm
30m
m
1 2
60mm9mm
10
4m
m
10
8m
m
78
mm
Receiver RF remote
1. Parameter:
3. Product Size:
Remote holder
RF WIRELESS
M3/M6/M7
Wall-mounted
www.ltech-led.com
Remote:
Model:
Working Voltage:
Working Frequency:
Working Temp.:
Dimensions:
Weight(N.W.):
M3/M6/M7
3V (battery
433.92MHz
-30℃~55℃L104×W58×H9(mm)
42g
CR2032)
Model:
Power Input:
Current Load:
Output Power:
Working Temp.:
Dimensions:
Weight(N.W.):
M3-3A
12~24Vdc
3A×3CH Max. 9A
(0~36W...72W)×3CH
-30℃~55℃L135×W30×H20(mm)
47g
Receiver:
Total Weight(G.W.): 135g
M series LED controller reflected LTECH more than 10 years’ powerful independent R&D ability in LED field,
Its volume is only 1/3 of the conventional controller, but can implement features such as dimming, RGB and color
temperature control. Its high cost performance and creative design, allowing users to enjoy the benefits and
convenience.
ini
2. System Diagram:
warranty5 years
Internet
Global remote controlL-Home
Cloud Service
Smart Remote(Gateway Version)
M1+M3-3A M2+M3-3A M3+M3-3A M5+M3-3A M6+M3-3A M7+M3-3A M4+M4-3A M8+M4-3A SPI-16S+M16S
4. Operating Instruction for Remote Control :
3 4
7. Wiring Diagram:
ON/OFF
Loop Play
Color Shortcut Key
Mode Shortcut Key Speed+/Speed-
Brightness+/-
ON/OFF
Speed/Brightness+
Mode Key
Speed/Brightness-
Touch Color Circle
ON/OFF Color Shortcut Key
Mode Shortcut Key
RGB Brightness +/-
Speed/ +Speed/Brightness-
Brightness
Loop Play
Color-save Key
(Press 2S and save)
Tables of Changing Mode:
5. Static Purple6. Static Cyan7. Static White8. RGB Skipping
9. 7 Colors Skipping10. RGB Color Smooth11. Full-color Smooth
1. Static Red2. Static Green3. Static Blue4. Static Yellow
(Change the modes in sequence)
M3-3A
PowerAdapter
RGB strip
Update Time: 2017.11.27
ZHUHAI LTECH TECHNOLOGY CO., LTD. WWW.LTECHONLINE.COM [email protected]
M6
M3
M7
www.ltech-led.com
5. Operating Instruction for Receiver:
Power input socket
Remote ID learning button
Indicator light
LED lamp connection
W W W + Dimming, M1
C W / V+ Color temperature, remote M2 M5
R G B V+ RGB control, remote M3 M6 M7
V remote
Learning ID: Short press ID learning button on the receiver M3-3A, the running light is on, then press any key on the remote control, the running light flashes several times, activated.
Cancel ID: Long press ID learning button on the receiver .for 5 seconds
Remote control has been matched to the receiver before leave factory, if deleted accidentally, you can learn IDas follow.
6. The Learning ID Method of Remote Control:
Attn: one receiver can be matched with max 10 same or different kinds remote. Receiver is no quantity limit when it match up with remote or gateway.