All Pathway ® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice. Alzak ® is a registered trademark of Alcoa. Fixture: Type: Project: Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: [email protected]APPLICATION Round-aperture, shallow profile LED fixture features tilt and rotational adjustability that is suitable for applications that require adjustable accent lighting, high efficacy, superior color rendering, long LED life and a variety of beam distributions. PRODUCT DATA REFLECTOR: Upper primary reflector optics are available in a variety of beam distributions. Lower reflector is standard in soft specular clear Alzak® and features a 5/8 inch polished flange. Optional finishes available upon request. AIMING MECHANISM: LED engine and primary reflector are mounted to an aiming mechanism so that they adjust in unison. Lockable aiming provides for 359° rotation and tilts up to 35°. HOUSING: 18 gauge steel with black finish. Standard plaster flange allows for a one- inch ceiling thickness. Adjustment features include mounting ears that allow for vertical adjustment of 2” and longitudinal adjustment along hanger bars. Internal components are finished in matte black to minimize component visibility from below. MOUNTING: Universal mounting brackets adjust vertically and accept L-BAR interocking, expandable c-channel hanger bars which are supplied standard. L-BARS are suitable for T-bar, wood joist and metal joist ceiling styles. Additional features on last page. ELECTRICAL: 120 or 277 VAC, 50-60 Hz. JUNCTION BOX: Heavy-gauge galvanized junction box pre-wired with grounding pigtail. Easy access covers. Multiple conduit knockouts listed for through branch circuit wiring. LED MODULE: Bridgelux V13 LED module. CRI = 80. Available in 90 CRI. HEAT MANAGEMENT: Engineered heat sink provides passive cooling for optimum heat management of LED engine. SERIES AS4LB Round Aperture Adjustable Accent/Downlight, 1006 - 2848 Lumen, Bridgelux LED LDBV31.0 CUMCUA • Expected lamp life to be 50,000 hours with 70% lumen maintenance when ambient tem- perature do not exceed 45°C. Lower ambient temperatures yield longer lamp life. Manufactured and tested to UL#1598, UL#8750 and CSA standards. Note: Suitable for damp location. Fixtures are not designed for direct contact with insulation. Rough Opening 5.13" 5.42" 4.42" 5.66" 4.33" 14.97" x 13.81" Catalog #: AS4LB ACC4420 Example: ACC4420SCLPF Example: AS4LB2035KE1N34DA Trim Trim Finish w/polished flange SCC44 – Open Straight Cut Cone for Downlight Use ACC4420 – 20° Angle Cut Cone for Adjustable Accent Use ACC4418 – 18° Angle Cut Cone for use with Optional Lenses Only* LW6 – Acrylic Micro Linear Spread Lens* L3 – C73 Prismatic Glass Lens* L5 – Frosted Glass Lens* L6 – Frosted Acrylic Lens* L7 – Solite Micro-Prismatic Glass Lens* L8 – Clear Poly Carbonate Lens* L9 – Clear Tempered Glass Lens* SCLPF – Soft Specular Clear Alzak HAZPF – Haze Alzak For white painted flange, drop “PF” from Catalog #. For other finishes, consult last page. Fixture Series Delivered Lumens* Color Temp. Input Voltage Beam Dist. Dimming AS4LB 10 (1006L - 1105L) 15 (1388L - 1525L) 20 (1926L - 2117L) 25 (2263L - 2487L) 30 (2593L - 2848L) C9 = 90 CRI 5K = 5000K 4K = 4000K 35K = 3500K 3K = 3000K 27K = 2700K E1 120 Volt E2 277 Volt S26 = 26° N34 = 34° M50 = 50° W60 = 60° L = Wide, for use with lensed trim DA = 0-10V Xitanium 1% (linear) standard See Next Page for More Options * Lens is installed on 18° angle cut cone. Model #ACC4418 *Open Reflector/80 CRI For Damp Location Options q F = Fuse and Fuse Holder Emergency Battery Pack not available 1" THICK CEILING 5 Year Warranty S4 SHALLOW PLENUM SERIES
Transcript
All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.
APPLICATIONRound-aperture, shallow profile LED fixture features tilt and rotational adjustability that is suitable for applications that require adjustable accent lighting, high efficacy, superior color rendering, long LED life and a variety of beam distributions.
PRODUCT DATAREFLECTOR: Upper primary reflector optics are available in a variety of beam distributions. Lower reflector is standard in soft specular clear Alzak® and features a 5/8 inch polished flange. Optional finishes available upon request.AIMING MECHANISM: LED engine and primary reflector are mounted to an aiming mechanism so that they adjust in unison. Lockable aiming provides for 359° rotation and tilts up to 35°.HOUSING: 18 gauge steel with black finish. Standard plaster flange allows for a one-inch ceiling thickness. Adjustment features include mounting ears that allow for vertical adjustment of 2” and longitudinal adjustment along hanger bars. Internal components are finished in matte black to minimize component visibility from below.MOUNTING: Universal mounting brackets adjust vertically and accept L-BAR interocking, expandable c-channel hanger bars which are supplied standard. L-BARS are suitable for T-bar, wood joist and metal joist ceiling styles. Additional features on last page.ELECTRICAL: 120 or 277 VAC, 50-60 Hz. JUNCTION BOX: Heavy-gauge galvanized junction box pre-wired with grounding pigtail. Easy access covers. Multiple conduit knockouts listed for through branch circuit wiring.LED MODULE: Bridgelux V13 LED module. CRI = 80. Available in 90 CRI. HEAT MANAGEMENT: Engineered heat sink provides passive cooling for optimum heat management of LED engine.
SERIES AS4LB Round Aperture Adjustable Accent/Downlight, 1006 - 2848 Lumen, Bridgelux LED
LDBV31.0CUMCUA
• Expected lamp life to be 50,000 hours with 70% lumen maintenance when ambient tem-perature do not exceed 45°C. Lower ambient temperatures yield longer lamp life.
Manufactured and tested to UL#1598, UL#8750 and CSA standards. Note: Suitable for damp location. Fixtures are not designed for direct contact with insulation.
Rough Opening 5.13"
5.42"4.42"
5.66"
4.33"
14.97" x 13.81"
Catalog #:AS4LB ACC4420
Example: ACC4420SCLPFExample: AS4LB2035KE1N34DA
Trim Trim Finish w/polished flange
SCC44 – Open Straight Cut Cone for Downlight UseACC4420 – 20° Angle Cut Cone for Adjustable Accent UseACC4418 – 18° Angle Cut Cone for use with Optional Lenses Only*
DK = EldoLED DALI 0% (logarithmic)DL = EldoLED DALI 1% (logarithmic)
Miscellaneious Dimming Options
DM = Two-wire forward/reverse phase dimming, 120V only
Dimming Options: Specify option by suffix (shown in bold-face type)Our White Paper regarding Linear vs. Logarithmic Operating Characteristics is available in our 'Downloads' section of our website, or you may request one by emailing [email protected]
Our standard reflector finish is soft specular clear Alzak (SCL) with a polished self-flange (PF). Additional hues are noted to left. Several of these are offered in both a soft specular and a diffused/matte finish. For colors not shown, contact our sales department for advice on custom anodized finishes.
Specified suffix of desired finish.Example: 4VLEDSCLPFFor white painted flange omit PF.
Interlocking L-Bar hanger bars are now standard with all recessed Coventry Architectural lighting fixtures. Installer friendly features include:• L-Bars are fabricated from identical L-shaped cross sec-
tions that form a sturdy ½” by 1-1/2” C-channel profile for superior rigidity.
• Pre-marked with spacing locations for 24” T-bar; 16” and 24” joist ceilings (wood and metal).
• Extension locks with an easy-to-use integral twist tab. No separate fastener.
• Interlocking and expandable to 24”. Can be increased to 36” or 48” with the use of one additional bars.
• Allows for offset mounting.• Integral and barbed nail spike for wood joist ceilings.• Fits into the c-channel notches on our butterfly
mounting bracket.• Complete details including video demonstration is avail-
able at www.pathwaylighting.com.
To increase the included L-Bar set to a 36” length, order two model #015-954 and use one per side. To increase to a 48” length, order one #LBAR which is a complete set of four bars and use two per side.
