LED Par 64 V2 ORDERCODE 42460

Congratulations! You have bought a great, innovative product from Showtec.

The Showtec LED Par 64 brings excitement to any venue. Whether you want simple plug-&-play action or

a sophisticated DMX show, this product provides the effect you need.

You can rely on Showtec, for more excellent lighting products.

We design and manufacture professional light equipment for the entertainment industry.

New products are being launched regularly. We work hard to keep you, our customer, satisfied.

For more information: iwant@showtec.info

You can get some of the best quality, best priced products on the market from Showtec.

So next time, turn to Showtec for more great lighting equipment.

Always get the best -- with Showtec !

Thank you!

1

2

2

3

4

5

5

5

6

7

8

9

9

9

10

Showtec

Showtec LED Par 64™ Product Guide

Warning.................................................................................…...……………..…………………………….………..…..

Safety-instructions…………………………………………………………………………………………………………

Operating Determinations.………………………………………………………………………………………………

Rigging.………………………………………………………………………………………………………………………

Description...............................................................................…...………………………………………….………..….

Features and Overview ………………………………...….……………….………….……………………….……….

Set Up and Operation.....................................................................……..…………………………………….…………

Control Modes……………………………………………………………………………………………………………...

DMX Channels.........................................................................…………………………………………………..……

Light Output……..…………..…………………………………………………………….………………….……………

Maintenance...................................................................................………..………….…….………………………......

Troubleshooting............................................................................………………….………………….…………….......

No Light..…………………………………..........................................………………….…………………………….....

Product Specifications.................................................................……………….…….………………………………...

2

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to:

- be qualified

- follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to

warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-

observance of this manual or any unauthorized modification to the device.

Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

Never remove warning or informative labels from the unit.

Do not open the device and do not modify the device.

Never use anything to cover the ground contact.

Never look directly into the light source.

Never leave any cables lying around.

Never use the device during thunderstorms, unplug the device immediately.

Do not insert objects into air vents.

Do not connect this device to a dimmerpack.

Do not switch the device on and off in short intervals, as this would reduce the lamp’s life.

Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).

Do not shake the device. Avoid brute force when installing or operating the device.

Only use device indoor, avoid contact with water or other liquids.

Only operate the fixture after having checked that the housing is firmly closed and all screws are

tightly fastened.

Only operate the device after having familiarized with its functions.

Avoid flames and do not put close to flammable liquids or gases.

Always replace the lamp, when it is damaged or deformed due to the heat.

Always keep case closed while operating.

Always allow free air space of at least 50 cm around the unit for ventilation.

CAUTION!

Keep this device away from rain and moisture! Unplug mains lead before opening the housing!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

3

Always disconnect power from the mains, when device is not used, before cleaning or when

replacing lamp! Only handle the power-cord by the plug. Never pull out the plug by tugging the

power-cord.

Make sure that the device is not exposed to extreme heat, moisture or dust.

Make sure that the available voltage is not higher than stated on the rear panel.

Make sure that the power-cord is never crimped or damaged. Check the device and the power-

cord from time to time.

Make sure that no side forces can impact on the truss system.

The cable insert or the female part in the device must never be strained. There must always be

sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly

electrical shocks.

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do

not switch it on immediately. The arising condensation water might damage your device. Leave

the device switched off until it has reached room temperature.

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

For adult use only. Light effect must be installed out of the reach of children. Never leave the unit

running unattended.

For replacement use fuses of same type and rating only.

This device can be installed on a flat surface or onto truss systems via the mounting bracket.

The user is responsible for correct positioning and operating of the LED Par 64. The manufacturer

will not accept liability for damages caused by the misuse or incorrect installation of this device.

This device falls under protection class I. Therefore it is essential to connect the yellow/green

conductor to earth.

During the initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective.

Repairs, servicing and electric connection must be carried out by a qualified technician.

WARRANTY: Till one year after date of purchase.

OPERATING DETERMINATIONS

This device is not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

The minimum distance between light-output and the illuminated surface must be more than 0,5 meters.

The maximum ambient temperature ta = 45°C must never be exceeded.

The relative humidity must not exceed 50 % with an ambient temperature of 45° C.

If this device is operated in any other way, than the one described in this manual, the product may suffer

damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash

etc.

You endanger your own safety and the safety of others!

CAUTION ! EYEDAMAGES !. Avoid looking directly into the light source.

(meant especially for epileptics) !

4

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other

safety issues.

Do not attempt the installation yourself !

Always let the installation be carried out by an authorized dealer !

Procedure: If the LED Par 64 is lowered from the ceiling or high joists, professional trussing systems have to be

used.

Use a clamp to mount the LED Par 64, with the mounting-bracket, to the trussing system.

The LED Par 64 must never be fixed swinging freely in the room.

The installation must always be secured with a safety attachment, e.g. an appropriate safety net

or safety-cable.

When rigging, derigging or servicing the LED Par 64, always make sure, that the area below the

installation place is blocked and staying in the area is forbidden.

Improper installation can cause serious damage to people and property !

Connection with the mains Connect the device to the mains with the power-plug.

Always pay attention, that the right color cable is connected to the right place.

International EU Cable UK Cable US Cable Pin

L BROWN RED YELLOW/COPPER FASE

N BLUE BLACK SILVER NUL

YELLOW/GREEN GREEN GREEN EARTH

Make sure that the device is always connected properly to the earth!

5

Description of the device

Features The Showtec LED Par 64 is a LED parcan with high output and great effects.

• Never change lamps again!

• Beam angle 45 º

• DMX-512 controlled

• Signal connector XLR 3-pole Male/ Female

• Indoor use only

• Fuse 1A / 250V

• 18x 3in1 3W LEDs (18 Red, 18 Green, 18 Blue)

• 1, 2, 3 or 7 DMX channel Mode

NOTE: Knowledge of DMX is required to fully utilize this unit.

Overview

Mode Up Down

1 2

Fig. 1

1) DMX signal connector (IN)

2) DMX signal connector (OUT)

Installation Remove all packing materials from the LED Par 64. Check that all foam and plastic padding is removed.

Connect all cables.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage.

Damages caused by non-observance are not subject to warranty.

6

FUNCTIONS: There are 2 options for using the LED Par 64: Stand-alone

DMX Mode

Stand-alone In Stand-alone mode, you can use the menu button on the back of the device to scroll through the

options.

DMX Mode

The LED Par 64 will automatically detect the presence of a DMX signal.

If a DMX signal is present, the DMX LED will blink.

In order to receive a DMX signal, the controller must be attached to a DMX controller by a 3-pin DMX

cable and the DMX controller must be turned on.

The LED Par 64 system can operate as a 1, 2, 3 or 7-channel DMX fixture.

7

Mode Options

Mode 1 (1 DMX Channel) Mode 3 (3 DMX Channels)

Mode 2 (2 DMX Channels) Mode 4 (7 DMX Channels)

Mode 1 - 1 Channels

Channel 1 – Macro Colors

Mode 2 - 2 Channels

Channel 1 – Macro Colors

Channel 2 – Dimmer

Mode 3 - 3 Channels

Channel 1 – Red

Channel 2 – Green

Channel 3 – Blue

Mode 4 - 7 Channels

Channel 1 – Red

Channel 2 – Green

Channel 3 – Blue

Channel 4 – Macro Colors

Channel 5 – Strobe / (Speed only in combination with CH6)

0-255 35 Macro colors

0-255 35 Macro colors

0-255 Dimmer from 0 – 100%

0-255 Red from 0 – 100%

0-255 Green from 0 – 100%

0-255 Blue from 0 – 100%

0-255 Red from 0 – 100%

0-255 Green from 0 – 100%

0-255 Blue from 0 – 100%

0-255 35 Macro colors

0-255 Strobe, from slow to fast

8

Channel 6 – Built-in Programs

0-35 No function

36-71 Slow Fade IN to Full beam then Out

72-107 Full beam to slow Fade Out

108-143 Slow Fade IN to Full Beam to Slow Fade OUT

144-179 Continuous Flow of all colors from slow to fast

180-251 Color Switching

252-255 Sound-controlled

Note : from 36-143 the intensities only work if you also use CH1, CH2, CH3 .

From 36-251 CH5 controls the changing speed of the built-in programs.

Channel 7 – Dimmer

Light Output Light Output Measurement (for 25º beam angle)

0-255 Dimmer, from closed to open (0-100%)

9

Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be

inspected by an expert after every four years in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are to be

inspected by a skilled person once a year.

The following points have to be considered during the inspection:

1. All screws used for installing the device or parts of the device have to be tightly connected and must

not be corroded.

2. There may not be any deformations on housings, fixations and installation spots.

3. Mechanically moving parts like axles, eyes and others may not show any traces of wearing.

4. The electric power supply cables must not show any damages or material fatigue.

The Showtec LED Par 64 requires almost no maintenance. However, you should keep the unit clean.

Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and

then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and

a soft cloth. Do not use alcohol or solvents.

Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections

with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying

electric power.

Troubleshooting This troubleshooting guide is meant to help solve simple problems.

If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit

operates properly, do not carry out following steps.

1. If the device does not operate properly, unplug the device.

2. Check the power from the wall, all cables etc.

3. If all of the above appears to be O.K., plug the unit in again.

4. If you are unable to determine the cause of the problem, do not open the LED Par 64, as this may

damage the unit and the warranty will become void.

5. Return the device to your Showtec dealer.

No Light This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps

below in sequence until a solution is found. Once the unit operates properly, do not carry out following

steps.

If the light effect does not operate properly, refer servicing to a technician.

Response: Suspect two potential problem areas: the power supply or the LEDs.

1. Power supply. Check that the unit is plugged into an appropriate power supply.

2. The LEDs. Return the LED Par 64 to your Showtec dealer.

10

Product Specification Model: Showtec LED Par 64

Voltage: AC 100-240 VAC/47-63HZ. (CE)

Power: 65W

Fuse 1A / 250V

18x 3in1 3 Watt Leds

Beam angle: 45 degrees

Dedicated controller: DMX-512

Signal connector: XLR 3-pole Male/ Female

Operating temp: 0-40 degrees

Indoor use

Dimensions: 470x280x270mm (LxWxH)

Weight: 4,1 kg

Minimum distance: Minimum distance from flammable surfaces: 0.5m

Minimum distance to lighted object: 1.3m

Design and product specifications are subject to change without prior notice.

Website: www.Showtec.info

Email: service@highlite.nl