LED RETROFIT SOLUTIONS - ZLed LightingLED lighting solutions for commercial and residential...

(800) 679-9243ZLED-LIGHTING.COM

2018LED RETROFIT

SOLUTIONS

TABLE OF CONTENTS

Letter From The President . . . . . 1

About ZLedLighting . . 2

How Does LED Work? . 3

Lighting Comparison . 4

Retrofit Opportunities . 5

Choosing A Retrofit Product 6

Comcast - A Case Study . . 7

Building Z - An ROI Estimation 8

LED Small Corn Lamps 9-11

LED HE Large Corn Lamps . . . 12-13

LED Corn Paddle Lamps 14-15

LED Enclosed Corn Lamps . . 16-17

LED Pyramid Corn Lamps 18-19

LED Post Top Lamps 20-21

LED Stubby Corn Lamps . 22

Corn Lamp Base Converters 23

PL and CFL Lamps . . . . . 24-25

HIDR Kits . . . . . . . 26-27

Recessed Downlights 28-29

Magnilumen - Magnetic Retrofit Kit 30-33

Notes

Version 1.09.18

LETTER FROM THE PRESIDENT

Lighting technology has come a very long way just

in the past decade Lower energy bills, better looking

properties, and rebates are just a few of the benefits that

come from retrofitting your businesses’ lighting!

A retrofit, or a relighting, is the renovation of your old

lighting fixtures and/or bulbs that improves the lighting

output and temperature of light all while emitting less

heat and saving energy As the government strives to

be greener and to meet our ever-growing expectations

of making less impact on the environment, there are

many incentives to get you to retrofit Most cities and

states have utility rebates A rebate is a payback on your

retrofit You’re essentially getting paid back a certain

percentage of what you paid for your retrofit because

you’re “taking a step in the right direction ”

Once you have decided to complete a lighting retrofit on

your property, how do you evaluate the differences in

competing proposals?

The bottom line is that you will want to determine which proposal offers your project the most value and

convenience Do both proposals offer the same services such as full site audits, photometric analysis, energy

audit, and rebate research? Some companies will not offer all of this to you and will have to outsource certain

services Here at ZLedLighting, we offer a “one stop shop” for all your site lighting needs So when you

contact us about a retrofit, we promise you’re getting the best there is to offer while each of our proposals are

complimentary to each customer

I have been In the lighting and electrical business for 30 years and have been involved in all aspects from

distribution to lighting design to manufacturing I have always felt that it is important to hear what the

customer’s needs are first and then put together a program that works for them

Working with ZLedLighting has given me the opportunity to bring energy efficient LED lighting fixtures

and retrofit products to customers across the country Since 2009, using the highest quality components,

ZLedLighting has developed creative lighting solutions for a wide variety of applications and sites These proven

solutions result in many cost and energy saving benefits to our customers and it is the singular reason they

consistently choose ZLedLighting for their high-performance LED lighting needs

Sincerely,

Ross Greenberg, IALD,LC LEED-AP O&M

1

ZLedLighting is a manufacturer of innovative energy-efficient LED lighting

fixtures and retrofit kits. Since 2009, ZLedLighting has been developing creative

lighting solutions utilizing quality components. Our employees come from

a variety of local, and national, contractor, distributor and manufacturing

backgrounds. This has enabled us to develop a set of marketing tools, and

strategies to help our customers and partners become more effective and

efficient in providing lighting conversion solutions.

We offer a broad spectrum of LED retrofit kits including but not limited to: corn lamps,

sign modules, flood lighting, under cabinet lighting, rope and strip lighting, and other

LED lighting solutions for commercial and residential applications

ZLED-LIGHTING.COM | (800) 679-9243

CONTRACTOR:

“I have been buying my

electrical supplies for a long

time. When I needed some

LED products I turned to

ZLedLighting. They sold me the

Magnilumen GAME CHANGER

magnetic retrofit product,

which was perfect for the job.

It was easy to install and they

helped my customer get all the

rebates. They both did a great

Job helping me satisfy my

customer.”

- Jay Davis, Electrical Contractor

END USER:

“ZLedLighting’s service was

phenomenal They were always

available for questions and jumped

in with both feet. They were totally

committed and were eager to do

whatever was needed to make sure

the project was done in a timely

and cost efficient way. I would

recommend them unconditionally

to any (car) dealer wanting to

reduce electric and maintenance

costs.”

- Richard Saccomanno Jr , Cherry Hill Audi

ABOUT

2

HOW DOES LED LIGHTING WORK?

LEDs are simply diodes that are designed to give

off light. When a diode is forward-biased so that

electrons and holes are zipping back and forth

across the junction. they’re constantly combining

and wiping one another out. Sooner or later, after

an electron moves from the n-type into the p-type

silicon, it will combine with a hole and disappear.

That makes an atom complete and more stable

and it gives off a little burst of energy in the form

of a tiny photon of light. This happens quintillions

of times per second.

3

LIGHTING COMPARISON


INCANDESCENT

MODERN

HALOGEN

COMPACT

FLUORESCENT LED

40W $22/YEAR

29W $16/YEAR

10W $5/YEAR

5W $2/YEAR

60W $32/YEAR

43W $22/YEAR

13W $7/YEAR

8W $4/YEAR

75W $41/YEAR

53W $29/YEAR

16W $9/YEAR

13W $7/YEAR

100W $54/YEAR

72W $39/YEAR

20W $11/YEAR

15W $8/YEAR

LEAST EFFICIENT

LE

SS

BR

IGH

T

MOST EFFICIENT

MO

RE

BR

IGH

T

1600 LUMENS

1100 LUMENS

800 LUMENS

450 LUMENS

80-85%MORE EFFICIENT

WHY SHOULD YOU CONVERT TO LED LIGHTING? LEDs are the latest technological advancement in the lighting industry LEDs operate

differently than traditional incandescent light bulbs, this makes LEDs far more rugged and

durable LED technology also offers many additional advantages over incandescent, neon and compact

fluorescent lighting devices - such as exceptionally longer life span (60,000 hours)

lower energy usage (90% more efficient) and reduced maintenance

costs and increased safety

4

RETROFIT OPPORTUNITIES

POTENTIAL SAVINGS: 90% PER YEAR!

LARGE/180° CORN LAMPS

LED HO PAR LAMPS

LED SINGLE COLOR FLOODS

LED UNDER CABINET LIGHTING

LED S-LAMPS

LED SIGN MODULES

SMALL CORN LAMPS

DOB CAN RETROFIT MAGNILUMEN MAGNETIC TROFFER

5

CHOOSING A RETROFIT PRODUCT

Choosing a retrofit product just got a lot easier We have created

this convenient chart and accompanying photos to help you

choose the LED retrofit product that will best fit your project

You will notice that the green checked boxes indicate a highly

recommended LED retrofit product for that application The

yellow boxes indicate that while you could use it; it’s not the

perfect retrofit product The red box indicates that the product is

not suitable for that application

In some instances you will see two or even three choices For

example, if you wanted to replace your existing work lights you

would have a choice of our large corn lights or our 180 degree

corn lights The latter only lights the front of the area because

it is perhaps attached to the ceiling and you might not need

light reflecting off the ceiling Other times, your work lights are

located lower and you need lighting above

Small Corn

Lamps

Large Corn

Lamps

180° Corn

Lamps

HID Retrofit

Kits

Magnilumen

Magnetic

Retrofit

T8 LED

Tubes

CFL

Replacement

Products

Architectural

Retrofit Kits

Bollards

P !

Scones

POutdoor

Jelly Jar PRecessed

Cans P P PWorklights

! P PHi/Low Bay

PShoeboxes

P P PCobrahead

P P PFloodlights

! P P PPosttops

P P PTroffers

P PIndustrial

Channel P P6

THE COMCAST CENTER | LIGHTING UPGRADE

In 2014, Comcast approached Hatzel & Buehler, Inc

to spearhead their search for an alternate lighting

concept, which would ultimately replace the

fluorescent lighting at the Comcast Center After

thorough research, several product attempts and

mock-up installations, a collective decision was made

to move forward with ZledLighting

ZLedLighting provided magnetically backed LED

retrofit kits, as well as CFL replacement lamps for the

Comcast Center Project Both products install very

quickly with minimal tools, and have high efficiency

ratings The magnetic retrofit product installs in less

than ten minutes, simply falling into place, turning

the entire body of the metal fixture into a heat sink

In addition to offering the most suitable products

for the Comcast Center, ZLedLighting’s installation

experience and product knowledge further

distinguished them

In partnership with ZledLighting, Hatzel & Buehler

was able to meet Comcast’s extremely aggressive

schedule for completion

Despite the difficult floor-plan and high

ceilings, the simplified design and com-

pactness of the ZLedLighting products

provided a more efficient installation,

when compared to conventional fixture

replacements

The lighting replacement project

will yield an energy savings of over

39,000 KWH per floor and an estimat-

ed 1,600,000 KWH annually The entire

project is expected to see an estimat-

ed annual 61% decrease in lighting

load per floor, which will generate a 19

month return on investment

ZLED-LIGHTING.COM | (800) 679-9243 7

WELCOME TO BUILDING Z!

Located in New York City Building Z is considering an LED retrofit with ZLedLighting’s

Magnilumen product Depending on what kind of fixtures they are replacing and what kind of

labor they use; there are different payback periods, all less than 18 months! Each city and each

building is different and ZLedLighting can build any customer a custom ROI scenario report!

ASSUMPTIONS:

• Building contains 100 fixtures

• All existing fixtures are replacedwith a 2 Lamp Magnilumen kit

• T-8’s will qualify for a $25 rebate

• T-12’s will qualify for a $50 rebate

• Con Ed Rate of $0 25/kWh, Code 13

• Product Tax Rate: 8 37%

• Service Tax Rate: 0 00%

• Existing Fixture Maintenance:

EXISTING

FIXTURES

LABOR

RATE

PROJECT

COST

NET COST

(WITH

REBATES)

10 YR

SAVINGS

PAYBACK

PERIOD

(YEARS)

COST OF

WAITING (PER

YEAR)

T8 - 4 Lamps

Union Labor $ 13,328 $10,828 $121,870 1 3 $12,672

Non Union Labor $12,028 $9,528 $121,870 1 2 $12,672

Maintenance Labor $11,248 $8,748 $121,870 1 1 $12,672

T8 - 3 Lamps

Union Labor $13,328 $ 10,828 $98,150 1 3 $9,360

Non Union Labor $12,028 $9,528 $98,150 1 3 $9,360


T8 - 2 Lamps

Union Labor $13,328 $10,828 $60,400 1 5 $5,670

Non Union Labor $12,028 $9,858 $60,400 1 3 $5,670


T12 - 4 Lamps

Union Labor $13,328 $8,328 $200,400 0 7 $19,400

Non Union Labor $12,028 $7,028 $200,400 0 6 $19,400


T12 - 3 Lamps

Union Labor $13,328 $8,328 $138,100 0 8 $14,200

Non Union Labor $12,028 $7,028 $138,100 0 8 $14,200


T12 - 2 Lamps

Union Labor $13,328 $8,328 $85,300 1 3 $8,235

Non Union Labor $12,028 $7,028 $85,300 1 3 $8,235


UNION LABOR NON UNION LABOR

~ $52 00/Fixture ~$39 00/Fixture ~$31 20/Fixture

LED RETROFIT RETURN ON INVESTMENT

8

TECHNICAL SPECIFICATIONS:

Part Number WattageLumens

+/- 10%

Dimensions

Approximate L x D

C-E26-7-NW-UL 7 770 6” X 2.375” 60w --

C-E26-9-NW-UL 9 1000 5.25” X 2.375” 90w --

C-E26-12-NW-UL 12 1320 6” X 2.375” 120w --

C-E26-15-NW-UL 15 1650 6.75” X 2.375” 150w 50w

C-E26-15-NW-MINIC-E39-15-NW-MINI

15 2,1005 13” x 2 75”

5 53” x 2 75”-- 50-100w

C-E26-18-NW-ULC-E39-18-NW-UL

Formerly 20W - same lumens!

18 2000 7.50” X 2.375”

7.50” X 2.375”

200w 70-100w

C-E26-7-NW-FR 7 700 5 12” x 1 89” 13W

C-E26-9-NW-FR 9 900 5 71” x 1 89” 13W

C-E26-12-NW-FR 12 1200 6 10” x 1 89” 26W

Suggested Equivalent

Incand. HID

ORDERING INFORMATION:

CERTIFICATIONS: CE - RoHS - UL

RATED: Up to 50,000 Hours

APPLICATIONS: Warehouse and manufacturing facilities,

outdoor post tops, bollards, commercial

and residential recessed cans, institutional

and educational facilities, and other

specialty projects

Type Base Wattage Kelvin Temp* UL Frosted Mini

C E26 Medium

E39 Mogul

7, 9, 12,

15, 18

Standard

NW - 4500-5000K - Natural White

Special Order

EW - 2700K - Extra Warm White

WW - 3100K - Warm White

DL - 5500K-6500K - Daylight

* Kelvin Temperatures may vary +/- 250K

UL FR MINI

Example: C-E26-15-NW-UL = Sm Corn - Med Base - 15 W - Natural White - UL

SPECIFICATIONS/FEATURES:

Operating temperature: -4F to + 104F

Actual wattage +/- 10%

100-305VAC

5 year limited warranty

See website for more information

Small LED Corn Lamps

PRODUCT DATASHEET

Updated 01/03/2018

Frosted Lens

Available by special order

C-E26-9-NW-FR

9W Frosted corn - Non-UL

Suggested CFL Equivalent

C-E26-15-NW-MINI

15W Mini Specially designed lamp fits

in most MINI HID Fixtures including

mini wallpacks & shoeboxes

INSTALLATION:

Secure incoming power Disconnect

ballast of old HID system and hardwire

socket to incoming power Corn lamps

contain an auto sensing driver that can

accommodate 100-305 VAC or 50-305

VDC

Corn lamps should be installed by a

qualified electrician

5.13”

2.75”

717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | [email protected] Actual product may vary.

SMALL CORN LAMPS

Small LED Corn Lamps are great for

a variety of retrofit applications. They

are perfect for post tops, bollards and

recessed cans.

They are very easy to install, coming in a

wide assortment of wattages. colors and

bases to replace nearly every CFL and

incandescent bulb currently in use.

Remove the cap and any diffusers/ lens.

Disconnect power and remove CFL bulb.

Direct wire the fixture to the power supply and insert the CFL adapter

Cut lines to the ballast and then remove.

Screw in the new equivalent Small LED Corn Lamp. Retrofit is complete!

Remove the CFL or incandescent bulb(s).

Replace with equivalent Small LED Corn Lamp(s). Retrofit is complete!

10


CERTIFICATIONS: ETL, DLC


Ventilation in any fixture can increase

the rated lifespan of corn lamps.

APPLICATIONS: Warehouse/manufacturing

factories, outdoor post tops, bollards,

commercial/residential recessed cans,

institutional/educational facilities, and more

Type Base Wattage Kelvin Temp* Input

C E26 Medium

E39 Mogul

30, 40, 60, 80,

100, 120, 150,

200, 250, 300

Standard

NW - 5000k - Natural White

Special Order

WW - 3000k - Warm White

W- 4000k - White

DL - 6000k - Daylight

* Kelvin Temperatures may vary +/- 250k

HE Special

Order

480VAC

Ex: C-E39-60-NW-HE= High Efficiency Corn - Mogul Base - 60 W - Natural White




CRI: >80Ra

PF: >0 9

100-277VAC

277-480 VAC available on following

wattages: 30, 40, 60, 80, 100, 120

5 year limited warranty

See website for more information

INSTALLATION:

Secure incoming power Disconnect


socket to incoming power Corn lamps


accommodate 100-305 VAC or 50-305

VDC


qualified electrician Units 60w and

above are recommended for

installation in ventilated housings,

particularly in high heat environments.



+/- 10%

Dimensions

Approx W x L

Suggested

HID EquivCerts

C-E26-30-NW-HE30 4,350

3.66”X 7.28”100-150W n/a

C-E39-30-NW-HE 3.66”X 7.68”

C-E26-40-NW-HE40 5,800

4 17” x 7 87” 150-175W

ETL

C-E39-40-NW-HE 4 17” x 8 27” ETL, DLC

C-E26-60-NW-HE60 8,700

4 17” x 9 84” 200-250W

ETL

C-E39-60-NW-HE 4 17” x 10 24” ETL, DLC

C-E26-80-NW-HE80 11,600

4 17” x 10 63”320-360W

ETL

C-E39-80-NW-HE 4 17” x 11 02” ETL, DLC

C-E26-100-NW-HE 100 14,500

4 17” x 11 61”400W

ETL

C-E39-100-NW-HE 4 17” x 12 01” ETL, DLC

C-E39-120-NW-HE 120 17,400 5 20” x 10 63” 450-500W ETL, DLC

C-E39-150-NW-HE 150 21,750 5 20” x 10 63” 500-600W ETL, DLC

C-E39-200-NW-HE 200 29,000 5 20” x 11 73” 600-800W ETL, DLC

C-E39-250-NW-HE 250 36,250 5 20” x 12 28” 800-1000W ETL, DLC

C-E39-300-NW-HE 300 39,000 5 20” x 13 39” 1000-1200W n/a

High Efficiency

LED Large Corn Lamps

For Non-Enclosed Fixtures

PRODUCT DATASHEET

Updated 01/03/2018

for approved fixture categories

*Where noted

DLC for approved fixture categories and only available

with Mogul Bases

Suitable for use in

Enclosed Fixtures:

30W, 40W, 60W, 80W,

100W, 120W, and 150W


Large LED Corn Lamps are an excellent LED retrofit

product. They are perfect for post tops, hi-bay fixtures,

shoeboxes, cobraheads, worklights and floodlights.

They are very easy to install, coming in a wide

assortment of wattages, colors and bases to replace

nearly every HID, CFL and incandescent bulb in use.

Large LED Corn Lamps offer 360° illumination and

come both UL rated and Non-UL rated and have a rated

lifetime of up to 50,000 hours.

Disconnect power and remove the CFL or Incandescent bulb(s) from the post top.

Install the equivalent Large LED Corn Lamp in the fixture.

LARGE CORN LAMPS


ZL-PAD-E39-80-NW

CERTIFICATIONS: CE - RoHS - UL - where noted


CRI: >80Ra

WARRANTY: 5 year limited warranty

INPUT: 100-300VAC, 50-60Hz

480VAC available

APPLICATIONS: Street lights, landscape lighting, wallpacks, shoe boxes, enclosed and outdoor fixtures

180° LED Corn Paddle Lamps

PRODUCT DATASHEET

Updated 01/03/2018

Part Number Wattage Kelvin TemperaturesLumens +/- 10%

Dimensions Width x Length

ULSuggested

HID Equivalent

CP-180d-E26-27-NWCP-180d-E39-27-NW

27 NW - 5000K - Natural White 2970 lm3 62” x 7 80”

3 62” x 8 19”-- 100-150W

CP-180d-E26-36-NWCP-180d-E39-36-NW


3 62” x 9 33”UL 150-175W

CP-180d-E26-45-NWCP-180d-E39-45-NW


3 62” x 10 47”-- 175-200W

CP-180d-E26-54-NWCP-180d-E39-54-NW

54 NW - 5000K - Natural White 5940 lm 3 62” x 10 63”

3 62” x 11 02”UL 250W

CP-180d-E26-75-NWCP-180d-E39-75-NW


3 62” x 11 81”UL 320-360W

30% more useable light with 180°

beam!

Heavy-duty heat sink for

enclosed fixtures

Heavy-duty heat sink

for enclosed fixtures

Support Bracket included

Base rotates for proper alignment

ORDERING INFORMATION: Example: CP-180d-E39-75-NW - 180° Corn paddle, E39 base, 75W, Natural White ZL-PAD-E39-100-NW - 180° Corn paddle, E39 base, 100W, Natural White

Type Base Wattage Kelvin Temp*

CP - 180dE26 - Medium Base

E39 - Mogul Base

27, 36,

45, 54, 75

Standard

NW - 5000K - Natural White

Special Order WW - 2700-3000K - Warm White

CW - 6000-6500K - Cool White

DL - 7000-8000K - Daylight

* Kelvin Temps may vary +/- 250K

ZL-PAD E39 - Mogul Base 80, 100, 120

IP65

Operating temp to 122°F. Specially designed for

outdoor, limited space and minimal ventilation!

Operating temp to 131°F. Specially

designed for outdoor, limited

space and minimal ventilation!

Retrofit existing fixtures

*for approved fixture categories


Part Number Wattage Kelvin TemperaturesLumens

+/- 10%

Dimensions

Length x width x heightUL

Suggested

HID Equivalent

ZL-PAD-E39-80-NW 80 NW - 5000K - Natural White 8,000 lm 10 83” x 5 91” x 3 15” UL 300-350W

ZL-PAD-E39-100-NW 100 NW - 5000K - Natural White 10,000 lm 10 83” x 5 91” x 3 15” UL 350-400W

ZL-PAD-E39-120-NW 120 NW - 5000K - Natural White 12,000 lm 10 83” x 5 91” x 3 15” UL 400W+

CP-180d-E39-54-NW

FEATURES: 180° Beam angle

Input Voltage: 100-277VAC, 50-60Hz

480VAC available

CRI: ≥80, PF: ≥0.9

Working Temp: -22° ~ 131°F

5 year limited warranty.

See website for more information.

Base rotates for

proper alignment

RECOMMENDED: Before installing,

please remove the existing reflector

to allow for better heat dissipation.

This will increase the longevity of

the LED lamp.

If reflector cannot be removed, then

vent holes should be placed in the

reflector for better heat transfer.


Disconnect the power supply and remove the cover.

Remove the HID or CFL lamp from the fixture. Cut the wires from the ballast to the socket.

Wire the power supply to the socket. Install the 180° LED Corn Lamp into the fixture. Retrofit is complete!

180° CORN LAMPS

180° Corn Lamps are perfect for wall

packs, landscape lighting, street lights and

shoeboxes.

They are very easy to Install, coming In a

wide assortment of wattages, colors and

bases to replace nearly every HID, CFL and

incandescent bulb in use.

They are perfect for situations where you

require light in only one direction. Typically

reflectors are used with HIDs or CFLs

but this lamp conserves energy by only

emitting 180° light.

14


CERTIFICATIONS: CE - RoHS - UL


WARRANTY: 5 year limited.

APPLICATIONS:

Enclosed outdoor fixtures, outdoor post tops,

bollards, commercial and residential

recessed cans, institutional and educational

facilities, shoeboxes, and wallpacks.

IP64 & IP65LED Corn Lamps

PRODUCT DATASHEET

Updated 01/08/2018


Type Base Wattage IP Gen Kelvin Temp ( May vary +/- 250K)

C E26 Medium

E39 Mogul

16, 20, 25, 27, 36, 45,

54, 75, 80, 100, 120

Special Order: 200, 250

IP64

IP65

G2 Standard

NW -5000K -

Natural White

Special Order

EW - 2700K - Extra Warm White

WW - 3000K - Warm White

W - 4000K - White

DL - 6000K - Daylight

Example: C-E39-36-IP65-G2-NW = Corn - Mogul Base - 36 Watts - IP65 - Generation2 - Natural White

TECHNICAL SPECIFICATIONS: Voltage 100-277 VAC, 480VAC Available on G2, IP65 lamps

Part Number Wattage Base Type Dimensions Lumens +/- 10% Suggested HID Equiv.

C-E26-16-IP65-G2-NW 16W E26 2.95”x 6.49” 2,400 lm 90-100W

C-E26-20-IP64-NW 20W E26 2.38” x 7.19” 2,200 lm 50-100W

C-E26-25-IP64-NW 25W E26 2.38” x 7.88” 2,750 lm 100-150W

C-E26-27-IP65-G2-NW

C-E39-27-IP65-G2-NW27W

E26

E39

3.74” x 6.89”

3.74” x 7.28”4,050 lm 150-175W

C-E26-36-IP65-G2-NW

C-E39-36-IP65-G2-NW36W

E26

E39

3.74” x 7.87”

3.74” x 8.27”5,400 lm 175-225W

C-E26-45-IP65-G2-NW

C-E39-45-IP65-G2-NW45W

E26

E39

3.74” x 8.86”

3.74” x 9.25”6,750 lm 225-275W

C-E26-54-IP65-G2-NW

C-E39-54-IP65-G2-NW54W

E26

E39

3.74” x 9.84”

3.74” x 10.24”8,100 lm 275-325W

C-E26-75-IP65-NW

C-E39-75-IP65-NW75W

E26

E39

3.74” x 11.81”

3.74” x 12.20”10,125 lm 320-360W

C-E39-80-IP65-G2-NW 80W E39 5.51” x 9.05” 12,000 lm 400W

C-E39-100-IP65-G2-NW 100W E39 5.51” x 9.65” 15,000 lm 400-500W

C-E39-120-IP65-G2-NW 120W E39 5.51” x 10.43” 18,000 lm 400-600W


Operating temp to 122°F. Specially designed for

outdoor, limited space and minimal ventilation!

* Note * Medium base (E26) can be converted to Mogul base (E39) without adding length by using “Adapter-8”

High Lumens

Suitable for wet and

damp locations


Enclosed LED Corn Lamps are an excellent LED retrofit

product. They are perfect for a variety of enclosed fixtures, including enclosed outdoor fixtures, outdoor

post tops, bollards, commercial and residential recessed cans, and for institutional and educational facilities.

They are very easy to install, coming in a wide

assortment of wattages, colors and bases. They are UL Listed and rated up to 50,000 hours.

Disconnect power and remove the Incandescent bulb(s) from the post top or other fixture.

Install the equivalent Enclosed

LED Corn Lamp in the fixture.

ENCLOSED CORN LAMPS



CERTIFICATIONS: UL


APPLICATIONS: Warehouse and

manufacturing high bays, parking garage

fixtures, gas station lighting, and in

various canopy lighting.

Type Base Wattage Kelvin Temp* Efficacy (L/W) Lens

C -PYR E26 Medium

E39 Mogul

30, 40, 50, 60,

70, 80

Standard


Special Order



* Kelvin Temps may vary +/- 250k

150L - 150 Lumens/Watt Special Order

FR - Frosted Lens

Example: C-PYR-E39-60-NW-150L = Pyramid Corn - Mogul Base - 60 W - Natural White - 150 Lumens/Watt efficacy




Frosted Lens available by special order

100-277VAC input voltage

Ballast must be bypassed.



LED Pyramid Corn Lamps

PRODUCT DATASHEET

Updated 01/03/2018



Part NumberAvailable

Base TypesWattage

Lumens

+/- 10%Kelvin Temp

Dimensions

Approx Diam x Length

Suggested

HID Equiv

C-PYR-E26-30-NW-150L


E26 Medium

E39 Mogul30 4500 NW-5000K 5.04” x 7.48” 75-105w MH, HPS



E26 Medium

E39 Mogul40 6000 NW-5000K 5.04” x 7.48” 125-150W MH, HPS



E26 Medium




E26 Medium




E26 Medium

E39 Mogul70 10,500 NW-5000K 5.91” x 8.66” 250-275W MH, HPS



E26 Medium

E39 Mogul80 12,000 NW-5000K 5.91” x 8.66” 275-300W MH, HPS

The conical surface LEDs

layout design direct all light

down to the ground.

No light wasted in the

sky = greatly improved

the lighting efficiency

and lighting effect.

RETROFIT EXISTING FIXTURES


PYRAMID CORN LAMPS


Disconnect the power supply and remove the lamp lens.


Wire the power supply to the socket. Install the Pyramid Corn Lamp into the fixture. Retrofit is complete!

For street lights, disconnect the power supply and remove the lamp lens. Remove the existing incandescent bulb and install the new Pyramid Corn Lamp.

LED Pyramid Corn Lamps have a unique design, which

distributes light downward and outward at a downward

angle. This makes these lamps ideal as replacements

for highbays, lowbays and warehouse lighting.

They also look fantastic in street lighting and

decorative applications where light direction is

very important. They come in a wide variety of

colors, temperatures, and wattages with a rated

lifetime of 50,000 hours.

18


CERTIFICATIONS: UL


APPLICATIONS:

Outdoor post tops

and acorn fixtures

Example: C-PST-E39-60-NW-150L= Post Corn - Mogul Base - 60 W - Natural White - 150 Lumens /watt

LED Post top Corn Lamps

PRODUCT DATASHEET

Updated 01/03/2018


Part NumberAvailable

Base TypesWattage

Lumens

+/- 10%Kelvin Temp

Dimensions

Approx Diam x Length

Suggested

HID Equiv

C-PST-E26-30-NW-150L


E26 Medium

E39 Mogul30 4500 NW-5000K 5.04” x 7.48” 75-105w MH, HPS



E26 Medium




E26 Medium




E26 Medium


The conical surface

LEDs layout design

direct all light down

to the ground.

No light wasted in the

sky = greatly improved

the lighting efficiency

and lighting effect.






Frosted Lens available by special order

100-277VAC input voltage

Ballast must be bypassed.

5 year limited warranty. See website for more information.

Type Base Wattage Kelvin Temp* Efficacy (L/W) Lens

C -PST E26 Medium

E39 Mogul

30, 40,

50, 60

Standard


Special Order



* Kelvin Temps may vary +/- 250k

150L - 150 Lumens/Watt Special Order

FR - Frosted Lens


POST TOP CORN LAMPS


Disconnect the power supply and remove the lamp lens.


Wire the power supply to the socket. Install the Post Top Corn

Lamp into the fixture. Retrofit is complete!

For street lights, disconnect the power supply and remove the lamp lens. Remove the existing incandescent bulb and install the new Post Top Corn Lamp.

LED Post Top Corn Lamps have a unique design, which

distributes light downward and outward at a downward

angle. This makes these lamps ideal as replacements

for highbays, lowbays and warehouse lighting.

They also look fantastic in street lighting and

decorative applications where light direction is

very important. They come in a wide variety of

colors, temperatures, and wattages with a rated

lifetime of 50,000 hours.

20



Ventilation in any fixture can increase

the rated lifespan of corn lamps.

APPLICATIONS: Warehouse/manufacturing factories,

outdoor post tops, bollards, commercial/

residential recessed cans, institutional/

educational facilities, and more.

Type Base Wattage Kelvin Temp*

C E26 Medium

E39 Mogul

15, 20, 30, 40, 50, 65,

85, 105, 135

Standard


Special Order



* Kelvin Temperatures may vary +/- 250k

MINI

STUB

Example: C-E39-65-NW-STUB = Stubby Corn - Mogul Base - 65 W - Natural White




On-board fan

CRI: >80Ra

PF: >0.9

100-300VAC

480 VAC available on following

wattages: 30, 40, 50, 65, 85, 135W



INSTALLATION:

Secure incoming power. Disconnect


socket to incoming power. Corn lamps


accommodate 100-300VAC or 50-305

VDC.


qualified electrician.



+/- 10%

Dimensions

Approx L x W

Suggested

HID EquivalentCerts

C-E26-15-NW-MINI15 2,100

5.24” x 2.95”50-100W ETL

C-E39-15-NW-MINI 5.24” x 2.95”

C-E26-20-NW-STUB20 2,800

5.91” x 2.95”100-150W --

C-E39-20-NW-STUB 5.91” x 2.95”

C-E26-30-NW-STUB30 4,350

6.30” x 4.17”

100-150W

ETL

C-E39-30-NW-STUB 6.69” x 4.17” ETL

C-E26-40-NW-STUB40 5,800

6.30” x 4.17”

150-175W

ETL

C-E39-40-NW-STUB 6.69” x 4.17” ETL, DLC

C-E26-50-NW-STUB50 7,250

6.30” x 4.17”

175-200W

ETL


C-E26-65-NW-STUB65 9,425

6.50” x 4.17”

200-250W

ETL


C-E26-85-NW-STUB85 12,325

6.50” x 4.17”

300-400W

ETL


C-E39-105-NW-STUB 105 15,225 9.65” x 4.17” 400-450W ETL, DLC

C-E39-135-NW-STUB 135 19,575 9.45” x 5.20” 400-550W n/a

LED Stubby Corn Lamps

PRODUCT DATASHEET

Updated 01/07/2018

Stubby Corn Lamps are great for

Short Fixtures and Specialty Applications!

15W Mini retrofitting “Mini” HID Wallpack

CERTIFICATIONS: where noted

Suitable for use in

Enclosed Fixtures:

15W, 20W, 30W, 40W, 50W,

65W, 85W, and 135W


Fit

s M

INI

HID

Fix

ture

s

Cherry Hill, NJ 08034 | Office (800) 679-9243 | Fax (888) 336-2165 | [email protected] Actual product may vary.

Base Converters + Extenders

PRODUCT DATASHEET

Updated 09/11/17

Candelabra > Medium

#1

Intermediate > Candelabra

#2

Intermediate > Medium

#3 #5

Medium > Medium (Extender)

Mogul > Medium Mogul > Mogul (Extender)

Adds 1.25” to length

Adds 1.25” to length

Medium > Mogul

#6 #7

Mogul > Medium

No

Extra

Length #8

Part

NumberFixture Socket TO Lamp Type

#8 Adapter-8 Mogul (E39) >Medium (E26)

(No Extra Length)

#9 Adapter-9Mogul (E39)

(Extender)> Mogul (E39)

#10 Adapter-10 GU24 > Medium (E26)

#11 Adapter-11 G24d-1/2/3 > Medium (E26)

#12 Adapter-12G24Q-1/2/3

GX24Q-1/2/3/4/5> Medium (E26)

#13 Adapter-13 Gx23-1/2/3 > Medium (E26)

#14 Adapter-14 G23-1/2/3 > Medium (E26)

#15 Adapter-15Mogul (EX39)

(Pulse Start)> Mogul (E39)

LED Replacement is approximately 1/2 of the CFL wattageConverters add an additional 1/4”

to length of the lampG24q“q” = 4 pins “d” = 2 pins

G 2 4 d

Double Bayonette > Medium

#4

GU24> Medium

#10

Pulse Start Mogul > Mogul

#15

G24D(1/2/3)> Medium

#11

G24Q(1/2/3)> Medium

Also replaces: Gx24Q (1/2/3/4/5) #12

G23(1/2/3)> Medium

#14

#9

Gx23(1/2/3)> Medium

#13

Part

NumberFixture Socket TO Lamp Type

#1 Adapter-1 Candelabra (E12) > Medium (E26)

#2 Adapter-2 Intermediate (E17) >Candelabra

(E12)

#3 Adapter-3 Intermediate (E17) > Medium (E26)

#4 Adapter-4Double Contact -

Bayonette> Medium (E26)

#5 Adapter-5Medium (E26)

(Extender)> Medium (E26)

#6 Adapter-6 Medium (E26) > Mogul (E39)

#7 Adapter-7 Mogul (E39) > Medium (E26)

22

LED LONG TUBE FLUORESCENT REPLACEMENT PLUG-IN: 120VPart No. Example: SP-2G11-15w-30-C-UR Small Paddle, 2G11 Plugin Base, 15 W, 3000K., Clear Lens, UR

Type Base Type WattageKelvin Temp

may vary +/- 250KLens Type

Lumens +/- 10%

URSuggested

CFL Replace.

SP 2G11

15W27 - 2700K 30 - 3000K 41 - 4100K

50 - 5000-5500K 60 - 6000K

C Clear

FFrosted

1400 UR 26/32W

20W 1900 UR 42W

CERTIFICATIONS: CE - RoHS UL RATED: Up to 50,000 Hours APPLICATIONS: Recessed cans, sconces, and fi xtures.

Cherry Hill, NJ 08034 | Offi ce (800) 679-9243 | Fax (888) 336-2165 | [email protected] Actual product may vary.

CFL Replacement LED Lamp

PRODUCT DATASHEET

Updated 08/24/2017

HORIZONTAL MOUNT PL LAMP Input: AC100-277V (50~60Hz)

Part Number

Available Bases

(Must specify in

Part Number)

WattageAvailable

Kelvin TempLumens

Dimensionslength x diam.

Suggested

Equivalent

PL-(Base)-6-NW-H G23

GX23

G24d

G24q

GX24q

GU24

6WNW - 4100WW - 3000

620 5.30” x 1.35” 13W CFL

PL-(Base)-8-NW-H 8WNW - 4100WW - 3000

850 6.30” x 1.35” 18W CFL

PL-(Base)-11-NW-H 11WNW - 4100WW - 3000

1270 7.20” x 1.35” 26W CFL

VERTICAL MOUNT PL LAMP Input: AC100-277V (50~60Hz)

Part Number

Available Bases

(Must specify in

Part Number)

WattageAvailable

Kelvin TempLumens

Dimensionslength x diam.

Suggested

Equivalent

PL-(Base)-6-NW-V G23

GX23

G24d

G24q

GX24q

GU24

6WNW - 4100WW - 3000

620 4.70” x 2.20” 13W CFL

PL-(Base)-8-NW-V 8WNW - 4100WW - 3000

850 4.70” x 2.20” 18W CFL

PL-(Base)-11-NW-V 11WNW - 4100WW - 3000

1270 4.70” x 2.20” 26W CFL

LED LONG TUBE FLUORESCENT REPLACEMENT PLUG-IN:

2G11 Base

Other Bases available by special order

Dimensions: SP-2G11-15W: 16.6”x 1.71”x 1.15” SP-2G11-20W: 21.06”x 1.71”x 1.15”

READ BEFORE INSTALLATION: IN ORDER TO USE THIS PL

REPLACEMENT LAMP, THE BALLAST MUST BE BYPASSED AND

FIXTURE REWIRED ACCORDING TO THE DIAGRAM BELOW. 110-277V

LINE AND NEUTRAL MUST BE CONNECTED TO OPPOSITE PINS OF

LAMP. IF ANY QUESTIONS OR CONCERNS, CALL (800) 679-9243

BEFORE INSTALLING. IF INSTALLED WITHOUT BYPASSING THE

BALLAST , THIS LAMP WILL BE DESTROYED.

CFL ballast must be Bypassed Directly to Lamp Socket

Checking for room in the fi xture before

ordering is critical since there many style

fi xtures that take the same PL Lamps.

Ballast must be bypassed

• =Line =Neutral

G24q - 4 pin base wiring

• =Line =Neutral

G24d - 2 pin base wiring

23

CFL Replacement LED Lamps are great for applications

where you are happy with the fixture itself, for example

decorative wall sconces or recessed cans that can be

difficult to remove and leave behind holes in the drywall

or other unsightly damage. Our line of PL Replacement

lamps make it easy to retrofit these fixtures.

PL lamps are available in a variety of wattages, color

temperatures, and base styles to fit any fixture. They

often require 50% less power than the CFL’s they replace.

Disconnect the power and remove CFL bulb.

Disconnect the power and remove CFL bulb.



Install the PL lamp into the fixture. Retrofit is complete!

Install the PL lamp into the fixture. Retrofit is complete!

PL REPLACEMENT LAMPS

24

Standard E39 BracketSupplied with kit


CERTIFICATIONS:

CE - RoHS , UL, DLC


APPLICATIONS:

Shoeboxes, streetlights,

floodlights, wall packs, high

bays, and canopy retrofits.

Type Wattage Kelvin Temp - may vary +/- 250K Voltage

HIDRP (Philips Chips)

45, 60, 80, 100, 120, 150,

200, 240, 300, 400, 480

Standard

NW - 5000K -

Natural White

Special Order

CW - 4000K - Cool White

CW+ - 4500K - Cool White +

DL - 5700K - Daylight

90-277V - standard

HV - 200/480V

Example: HIDRP-480-NW

LED HID Retrofit Kit with Philips Chips

PRODUCT DATASHEET

Updated 01/03/2018

Brackets can be mounted vertically or horizontally in fixture

Adjustable Mounting Bracket

Order separately

Part number: AMB

Part Number Wattage Lumens DimensionsSuggested Equivalent

Incandescent CFL HIDDLC

HIDRP-45-NW45 4,950 4.69” x 4.69” x 2.69” 300W 100W 175W

No

HIDRP-45-NW-HV No

HIDRP-60-NW60 7,500 (7.08-8.27) x 5.20 x 5.12 450W 150W 300W

Yes

HIDRP-60-NW-HV No

HIDRP-80-NW80 10,000 (9.25-11.22) x 6.30 x (5.12-5.91) 600W 180W 375-400W

Yes

HIDRP-80-NW-HV No

HIDRP-100-NW100 12,500 (9.25-11.22) x 6.30 x (5.12-5.91) 800W 250W 400W

Yes

HIDRP-100-NW-HV No

HIDRP-120-NW120 15,000 (9.25-11.22) x 6.30 x (5.12-5.91) 900W 300W 400-600W

Yes

HIDRP-120-NW-HV No

HIDRP-150-NW150 18,750 (12.80-13.98) x 7.17 x (5.12-6.30) 1200W 350W 700-800W

Yes

HIDRP-150-NW-HV No

HIDRP-200-NW200 25,000 (12.80-13.98) x 7.17 x (5.12-6.30) 1500W 500W 800-1000W

Yes

HIDRP-200-NW-HV No

HIDRP-240-NW240 30,000 (12.80-13.98) x 7.17 x (5.12-6.30) 1800W 550W 1000W

Yes

HIDRP-240-NW-HV No

HIDRP-300-NW300 37,500 (14.96-17.52) x 10.24 x (5.12-6.30) 2500W 700W 1500W

Yes

HIDRP-300-NW-HV No

HIDRP-400-NW400 50,000 (14.96-17.52) x 10.24 x (5.12-6.30) 3000W 900W 1500W+

Yes

HIDRP-400-NW-HV No

HIDRP-480-NW480 60,000 (14.96-17.52) x 10.24 x (5.12-6.30) 3500W 1000W 1500W+

Yes

HIDRP-480-NW-HV No


SPECIFICATIONS/ FEATURES:

UL cUL certificate, DLC

PHILIPS Chip, SUNON fan

HIDRP: CRI: > 80Ra

Input voltage 90-277VAC.

200/480VAC where listed by HV

No UV or IR in the beam

Easy to install and operate

Instant start, NO flickering, NO humming

Green and eco-friendly without mercury.

5 year limited warranty.See website for more information.

available where noted

Number ranges under “Dimensions” account for adjustable mounting brackets.


HID Retrofit Kits are the best choice to replace

high energy consuming site lighting and flood

lighting. They start up instantly and never flicker.

The light they emit is soft and uniform and very

pleasing to consumers eyes. Car dealerships

choose the HID Retrofit Kits because their

automobiles look amazing under this bright,

even light. Residential communities experience

an increase in safety lighting, while cutting up to

80% off their lighting energy consumption.

Disconnect the power. Remove the lens and/or cover.

Install the new LED driver in the ballast compartment. Install the HIDR bracket, that can be mounted vertically or horizontally and slides and rotates for the correct angle. Plug in the HIDR lamp and the retrofit is complete!

Remove the HID lamp and cut out the ballast.

HID RETROFIT KITS


Cherry Hill, NJ 08034 | Office (800) 679-9243 | Fax (888) 336-2165 | [email protected] Actual product may vary.

ZL-LEDH-ARFK6 6" Architectural LED

120~277V, 6” Non-IC 14W, 23W, 30W & 45W LED Retrofit-Kit

PRODUCT DATASHEET

Updated 03/21/2016

DESIGN FEATURES

REFLECTOR

• Heavy gauge aluminum reflector anodized in clear, haze, gold, champagne and pewter

color finish Reflectors may provide with black and white milled groove baffle collar

RETROFIT MOUNTING

• Designed for use with most existing 6-3/8”~7-1/4” aperture architectural incandescent,

fluorescent and metal halide housings Supplied with flexible metal conduit for connection

to existing electrical junction box Existing frame-in kits mounting via frictions or clips

ELECTRICAL CONNECTION

• Attach supply line to existing junction box through one of the knockouts provided in

junction box The existing socket whip and ballast can be set aside above the ceiling or

removed completely

LED POWER SUPPLY DRIVER

• 120~277V input high efficacy drivers with the capability to dim by a Triac 120V low voltage

electronic dimmer switches by 0-10V dimmer switches

• Driver feature power factor > 90, THD <20% and has integral thermal protection to sense

over temperature or internal failure

• Driver mounts externally to the module, allowing future replacement, if needed

• Install thermal detectors for 120V or 277V upon customer orders

DESCRIPTION

Architectural grade LED Recessed Downlight Retrofit Trim Module with Clear Cone

Designed for use with existing 6” Architectural Incandescent, Fluorescent and Metal Halide

Housing Also, compatible with most 6” architectural housings measuring at least 5-5/8”

high with an inside diameter between 6-3/8” and 7-1/4” (See Housing Compatibility

section) Provided in high efficacy LED with integral dimmable driver and the optical

diffusion produces high lumen transmission and even illumination Suitable for Damp

location

SPECIFICATIONS

LED Quantity 1ea (COB)

Input Voltage 120-277V AC

Wattage (+/-5%) 14W 23W 30W 45W

Lumens (+/-5%) 947 1573 2078 2886

Efficacy (LPW) 67 6 68 4 69 3 65 3

Beam Angle 75° 75° 75° 75°

Color (+/-5%) 3000K, 3500K, 4000K

CRI (Typical) 80

Dimming Triac (Standard), 0-10V

Rated up to 50,000 hr

Environment Damp & Wet Location

Triac Approved Dimmers

* Lutron: NovaT (Ntelv 300&600)

Diva (Dvelv-300P&303P)

* Leviton: Acenti: Ate06-1Lw

* Leviton Trimatron #705W (incandescent)

0-10V Approved Dimmers

* Lutron: Nova 0-10V : NTFTV

Diva 0-10V : DVTV

* Leviton: Decora 0-10V : IP710DL

Consult tech, service or factory for

additional dimmers

Easy Quick Connector Case

℃

①②

OPTIONS

• Emergency battery back-up : Available

in mounted to fixture or remote adjacent

to luminaire (consult with factory for

exact application)

WARRANTY

• 50,000 hr lamp life

Listing ETL & cETL Listed

-State of California Title 24

-Energy star Approved & Listed

Ceiling Cut-out : 6-3/8”~7-1/4”

①②

6-1/16”153mm

5-5/8”(143.2mm)

①②

7-15/16”(201mm)

DRIVER

①②

27

RECESSED DOWNLIGHT RETROFIT


Recessed downlight retrofits are an easy alternative to

installing new fixtures when you want to upgrade to

LED and select a new reflector and trim kit. They are

designed for use with existing 6” architectural housings

measuring at least 5-5/8” high with an inside diameter

between 6-3/8” and 7-1/4”. They are high efficiency LED with

internal dimmable driver and suitable for damp locations.

Reflectors come in clear, haze, gold, champagne and

pewter. Trim options include black and white.

Disconnect power and pull trip and reflector down from ceiling.

Disconnect ballast (if CFL) and remove. Remove socket and wire from the electrical box.

Wire the retrofit kit to the electrical box, attach the driver to the box or framing kit. Push the new reflector and trim kit into the ceiling

28

Magnilumen Magnetic LED

Fluorescent Retrofit Kits

Retail Packaging

PRODUCT DATASHEET

Updated 01/03/2018

Part Number - (Available Colors) Watt.LED

Strips

# of

Drivers

- Total

Wattage

Color Temp

(Must specify in

part number)

Lumens (with / without)

frosted diffuser lens

on led boards

Certifications

with without

MRK2430-(35k/40k/50k) [Retail packaging] 30W 2 x 4ft 1 - 30W35k - 3500k

40k - 4000k

50k - 5000k

3600 4260 ETL/DLC Premium

MRK2440-(35k/40k/50k) [Retail packaging] 40W 2 x 4ft 1 - 40W 4800 5680 ETL/DLC Premium

MRK2450-(40k/50k) [High Output] [Retail packaging] 50W 2 x 4ft 1 - 50W 6000 7100 ETL/DLC Premium

MRK2220-(35k/40k/50k) [Retail packaging] 20W 2 x 2ft 1 - 20W 2400 2840 ETL/DLC Premium

Retail Packaging: Full-color box sleeve

design with installation instructions

MUST SPECIFY IF ORDERING RETAIL PACKAGING (Available only on kits listed in table below)


Almost any light fixture can be renovated

with a Magnilumen Retrofit kit

THE GAME CHANGER IN LED RETROFITTING

CERTIFICATIONS: ETL, DLC Premium


APPLICATIONS:

2ft & 4ft Troffers

2ft, 4ft, 6ft & 8ft Channel Lights

2ft, 4ft & 8ft Surface Mount Fixtures

2x2, 2x4 & 2x8 ft Highbay Fixtures

2ft, 4ft, 6ft & 8ft Vapor Tight Fixtures

2x2 & 2x4 ft Direct & Indirect Fixtures

SPECIFICATIONS:

Input: 120/305VAC

Luminous Efficiency: >145 lm/W for the LED Module

>124–132 lm/W in a Luminaire

CRI (Ra): 83 nominal, Up to 95 CRI Avail.

Power Factor >.920

Ambient Temp. Range: -4° to 122°F

L70 >50,000 hours

IP: LED Board - IP30, LED Driver - IP20

5 year warranty. See warranty

page for details.

RETROFIT KITS INCLUDE:• LED boards • LED Driver (Pwr Supply)

• Wiring Harness • Magnetic Mounting

Maximum Watts per LED Board

LED Board Size : Max Watts per Board (per Color Temp)

16in: 10 W (3000-6000K) 10 W (Red/Grn/Blue/Blk)

2ft: 10 W (3000-6000K) 10 W (Red/Grn/Blue/Blk)

3ft: 15W (3000-6000K) 15 W (Red/Grn/Blue/Blk)




On-board 0-10V Dimmable Magnetic Driver

“Plug & Play“ 2-Way Wiring Harness

Quick-Connect

Clips

Clips to LED Boards

Input

PowerCERTIFICATIONS: ETL, DLC Premium


APPLICATIONS:

2ft & 4ft Troffers

2ft, 4ft, 6ft & 8ft Channel Lights

2ft, 4ft & 8ft Surface Mount Fixtures

2x2, 2x4 & 2x8 ft Highbay Fixtures

2ft, 4ft, 6ft & 8ft Vapor Tight Fixtures

2x2 & 2x4 ft Direct & Indirect Fixtures

Magnilumen Magnetic LED

Fluorescent Retrofit Kits

Job Packs

PRODUCT DATASHEET

Updated 01/03/2018

SPECIFICATIONS:

Input: 120/305VAC

Luminous Efficiency:

>145 lm/W for the LED Module

>124–132 lm/W in a Luminaire

CRI (Ra): 83 nominal,

Up to 95 CRI Available

Power Factor >.920

Ambient Temperature Range:

-4° to 122°F

L70 >50,000 hours

IP: LED Board - IP30, LED Driver - IP20

5 year warranty.

See warranty page for details.RETROFIT KITS INCLUDE:

• LED boards

• LED Driver (Power Supply)

• Wiring Harness

• Magnetic Mounting

4FT RETROFIT SPECIFICATIONS - 43” (Economy packaging)

Part Number - (Color) Watt. LED Strips # of

Drivers

- Total

Wattage

Color Temp

(Must specify in

part number)



on led boards

Certifications

with without

MRK1410-(30k/35k/40k/50k) 10W 1 x 4ft 1 - 10W

30k - 3000k

35k - 3500k

40k - 4000k

50k - 5000k


MRK1420-(30k/35k/40k/50k) 20W 1 x 4ft 1 - 20W 2400 2840 ETL/DLC Premium




MRK2450-(30k/35k/40k/50k) [High Output] 50W 2 x 4ft 1 - 50W 6000 7100 ETL/DLC Premium



MRK3450-(30k/35k/40k/50k) [High Output] 50W 3 x 4ft 1 - 50W 6000 7100 ETL


2FT RETROFIT SPECIFICATIONS - 21” (Economy packaging)

MRK1210-(30k/35k/40k/50k) 10W 1 x 2ft 1 - 10W

30k - 3000k

35k - 3500k

40k - 4000k

50k - 5000k





MRK4230-(30k/35k/40k/50k) 30W 4 x 2ft 1 - 30W 3600 4260 ETL



ORDERING GUIDE: Example part number - MRK3450-50k

SERIES BOARD QTY BOARD LENGTH WATT. COLOR TEMP

MRK

1 - BOARD

2 - BOARDS

3 - BOARDS

4 - BOARDS

F15 - 16 IN

2 - 2 FT

3 - 3 FT

4 - 4 FT

5 - 5 FT

5

10

20

30

40

50

30k - 3000k

35k - 3500k

40k - 4000k

45k - 4500k

50k - 5000k

2ft (21” LED boards)

4ft (43” LED boards)

Standard Kits come with all necessary components. Example: MRK3450-50k

Includes 3-way harness, LED driver, 3 sets of Mag-No-Hook mounting pieces & frosted lens

Only specify “Special Order Options” in part number

Example part number: MRK3450-50k-Harness-3-way-EXTHARNESS MOUNTING DIFFUSER LENS

Harness-1-way-Ext

Harness-3-way-Ext

Harness-4-way-Ext

Mag-Hook

No-Mag-Hook-Only

No-Mag-No-Hook

End-Tab

Clear

None4500 Kelvin (45k) and 6000 Kelvin (60k) kits available

by special order - minimum order quantity may apply


Magnilumen Magnetic LED Fluorescent Retrofit Kits - Cont’dOdd Lengths & Specialty Colors

JOB PACKS

PRODUCT DATASHEET

Updated 01/03/2018

Part Number - (Color) Watt. LED Strips

# of

Drivers

- Total

Wattage

Color Temp

(Must specify in

part number)



on led boards

Certifications

with without

16IN RETROFIT SPECIFICATIONS - 16” (F15 LAMP REPLACEMENT)40k - 4000k

50k - 5000kMRK-1-F15-5W-(40k/50k) 5W 1 x 16in 1 - 5W 600 710 ETL

MRK-2-F15-10W-(40k/50k) 10W 2 x 16in 1 - 10W 1200 1420 ETL

3FT RETROFIT SPECIFICATIONS - 31”

MRK1310-(30k/35k/40k/50k) 10W 1 x 3ft 1 - 10W

30k - 3000k

35k - 3500k

40k - 4000k

50k - 5000k

1200 1420






Part Number - (Color) (Economy packaging) Watt. LED Strips # of Drivers - Total Wattage

Color Temp Certifications

4FT SPECIALTY COLORS - 43”

MRK2430-(60k/Red/Grn/Blue/Blk) 30W 2 x 4ft 1 - 30W

60k - 6000K

Red - Red

Grn - Green

Blue - Blue

Blk - Blacklight

(Must specify

in part number)

ETL (6000K only)

MRK2440-(60k/Red/Grn/Blue/Blk) 40W 2 x 4ft 1 - 40W ETL (6000K only)


MRK3450-(60k/Red/Grn/Blue/Blk) [High Output] 50W 3 x 4ft 1 - 50W ETL (6000K only)

MRK4450-(60k/Red/Grn/Blue/Blk) [High Output] 50W 4 x 4ft 1 - 50W ETL (6000K only)

2FT SPECIALTY COLORS - 21”





5FT RETROFIT SPECIFICATIONS - 58”

MRK1520-(30k/35k/40k/50k) 20W 1 x 5ft 1 - 20W

30k - 3000k

35k - 3500k

40k - 4000k

50k - 5000k

2400 2840 ETL








4500 Kelvin (45k) and 6000 Kelvin (60k) kits available


**Note** Specialty colors (Red, Grn, Blue, Blk) efficacy: 20 Lumens per watt

RETROFIT KITS INCLUDE: • LED boards • LED Driver (Power Supply) • Wiring Harness • Magnetic Mounting


SERIES BOARD QTY BOARD LENGTH WATTAGE COLOR TEMP

MRK

1 - BOARD

2 - BOARDS

3 - BOARDS

4 - BOARDS

F15 - 16 IN

2 - 2 FT

3 - 3 FT

5

10

20

30

40

50

Red - RedGrn - GreenBlue - BlueBlk - Blacklight30k - 3000k35k - 3500k40k - 4000k45k - 4500k50k - 5000k60k - 6000k

Special sizes and colors available

minimum order quantity may apply.

Specialty Colors - 3 year limited warranty

(Economy packaging)

Standard Kits come with all necessary components. Example: MRK3450-50k Includes 3-way harness, LED driver,

3 sets of Mag-No-Hook mounting pieces & frosted lens



Harness-1-way-Ext

Harness-3-way-Ext

Harness-4-way-Ext

Mag-Hook

No-Mag-Hook-Only

No-Mag-No-Hook

End-Tab

Clear

None



SERIES BOARD QTY BOARD LENGTH WATT. COLOR TEMP

MRK

1 - BOARD

2 - BOARDS

3 - BOARDS

4 - BOARDS

F15 - 16 IN

2 - 2 FT

3 - 3 FT

4 - 4 FT

5 - 5 FT

5

10

20

30

40

50

30k - 3000k

35k - 3500k

40k - 4000k

45k - 4500k

50k - 5000k

On-board 0-10V Dimmable Magnetic Driver

“Plug & Play“ 2-Way Wiring Harness Quick-Connect Clips

Clips to LED Boards

Input Power

PLUG & PLAY HARNESSES

Harness-1-way Connects 1 LED board to 1 driver.

Lead from driver connection to splitter: 11.00”;

1 board lead: 11.75”

Harness-1-way-Ext (Special Order) Connects 1 LED

board to 1 driver, has 8 ft extension on driver end.

Harness-2-way Connects 2 boards to 1 driver (Standard).


2 board leads: each 11.75”

Harness-3-way Connects 3 boards to 1 driver.



Harness-3-way-Ext (Special Order) Connects 3 boards

to 1 driver, has 6 ft extension on driver end. Lead from driver

connection to splitter: 11.00”; 2 board leads: each 11.75”, 1

board lead: 72.00”

Harness-4-way Connects 4 led boards to 1 driver



Harness-4-way-Ext Connects 4 led boards to 1 driver

2 board leads: each 11.75”, 2 board leads: 72.00”

Mag-Hook Clip with Magnet and Tab Feet for

optional TekScrew attachment

No-Mag-No-Hook Clip with center hole for TekScrew attach-

ment - NOT Magnetic

No-Mag-Hook-Only Tab Feet for TekScrew

attachment - NOT Magnetic

End-Tab Attaches to ends of LED board. Tab with

hole for optional TekScrew attachment -

Driver-10W 10W Dimmable Driver





STANDARD DRIVERS 0-10V Dimmable, Magnetic Backing for quick mounting w/ holes for optional

Tek Screw attachment. Driver Dimensions: 10.94”L x 1.12”W x 0.88”H

MOUNTING OPTIONS

STANDARD MOUNTING

Frosted (Standard)

Clear (Special Order)

None (Special Order)

REMOVABLE DIFFUSER LENS

Triac dimming coming soon! See website for more information.

(2 pcs supplied per LED board) Must specify in part number if required

MRK3460-(30k/35k/40k/50k) - Three 4ft boards

MRK4460-(30k/35k/40k/50k) - Four 4ft boards

MRK2560-(30k/35k/40k/50k) - Two 5ft boards

MRK3560-(30k/35k/40k/50k) - Three 5ft boards

MRK4560-(30k/35k/40k/50k) - Four 5ft boards

High Output Kit with 60W Driver available - Special Order - minimum quantities may apply Lumens (with / without)

Frosted diffuser lens on led boards

with without

7200 lm 8520lm

Magnilumen Kit Components

PRODUCT DATASHEET

Updated 01/03/2018

Maximum Watts per LED Board

LED Board Size : Max Watts per Board (per Color Temp)

16in: 10 W (3000-6000K) 10 W (Red/Grn/Blue/Blk)

2ft: 10 W (3000-6000K) 10 W (Red/Grn/Blue/Blk)




Standard Kits come with all necessary components. Example: MRK3450-50k

Includes 3-way harness, LED driver, 3 sets of Mag-No-Hook mounting pieces & frosted lens



Harness-1-way-Ext

Harness-3-way-Ext

Harness-4-way-Ext

Mag-Hook

No-Mag-Hook-Only

No-Mag-No-Hook

End-Tab

Clear

None

Mag-No-Hook (Standard) Clip with Magnet. Magnetic attachment only. Comes with all kits unless

other mounting specified

4500 Kelvin (45k) and 6000 Kelvin (60k) kits available



N OT E S

Extra Warm White Warm White Daylight

N OT E S

2500 KELVIN 3500 KELVIN 4000 KELVIN

Natural White

5000 KELVIN

Cool White

6500 KELVIN

COOL LIGHTAPPROXIMATE COMPARATIVE KELVIN COLOR TEMPERATURE CHARTWARM LIGHT

GENERAL NOTES:

While some lamps are designed

specifically for enclosed fixtures

and high-operating temperatures,

in general, adequate ventilation

around an LED lamp increases the

life of the lamp.

DLC certification of lamp only qualifies

for approved fixture categories.

Kelvin Temperatures may vary +/- 250K

Lumen Output may vary +/- 10%

Actual Wattage may vary +/- 10%

Due to rapid advancements in LED technology,

these specifications are subject to change.

Please visit us online at ZLed-Lighting.com

for full specifications, installation & ordering details.

COMMON BASE TYPES:

E26 - Medium Screw Base

E39 - Mogul Screw Base

E12 - Candelabra Screw Base

• View our complete catalog

• Get a custom lighting quote

• Chat with one of our

lighting designers

• Learn about ZLedLighting

• View our website

ONE APPTONS OF FEATURES

AVAILABLE FOR DOWNLOAD AT:

ZLed-Lighting.com

(800) 679-9243

Paper, i t ’s not an Earth-fr iendly word

these days. Our catalogs of energy saving,

environmentally friendly products use over 50

pieces of paper. By using our app instead of a

paper catalog you are helping us do even better

for our planet. Find us in the app store under

ZLED Catalog.

• View our complete catalog

• Get a custom lighting quote

• Chat with one of our lighting designers

• Learn about ZLedLighting

• View our website

2018 LED RETROFIT PRODUCTS

CHECK OUT THE CATALOG APP!

717 Fellowship Road Mount Laurel, NJ

(800) 679-9243

www.ZLed-Lighting.com

Date post:	11-Oct-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

LED RETROFIT SOLUTIONS - ZLed LightingLED lighting solutions for commercial and residential...

Documents