Date post: | 18-Nov-2014 |
Category: |
Technology |
Upload: | madonna-wallace |
View: | 895 times |
Download: | 1 times |
2010 solutions portfolio
WHERE LED TECHNOLOGY LIVES
Clean Light Green Light
If just 25% of fluorescent lighting fixtures in the U.S. were converted to
LEDs, we could:
• prevent the release of green house gases
equal to 10 million cars
• save 15 billion in electricity costs annually
• decommission 133 coal
burning power plants
• reduce carbon emissions by 158 metric tons and
avoid releasing 5,700 pounds of airborne mercury
WHERE LED TECHNOLOGY LIVES
Clean Light Green Light
Allow us to help you find the correct LED solution to reduce your energy consumption
and increase your profit margins
�
tab
le o
f co
nte
nts
LED off iceT8 tube lights pg. 6-7
Flat ceiling panels pg. 8-9
Recessed can retrofit pg. 10-11
LED warehouseHigh bay line pg. 12-13
High Bay tubes pg. 14-15
LED outdoorWall pack series pg. 16-17
Canopy series pg. 18
Flood light series pg. 19
LED streetSTLX series pg. 20-21
STL series pg. 22-23
Courtyard series pg. 24-25
LED bulbsReplacements pg. 26-27
LED retrofitLRP series pg. 28-29
Terms of payment pg. 30
5
Environmental impact of tradit ional l ighting
A typical commercial building’s lighting averages 37-50% of its electrical demand.
1 Billion fluorescent lamps are disposed of every year globally. That’s 50,000 pounds of mercury waste. It takes only 4 mg of mercury to poison 7,000 gallons of water. Enough mercury to pollute every gallon of water in the U.S. & Canada. 70% of the nation’s electricity comes from dirty coal burning plants.
If just 25% of fluorescent lighting fixtures in the U.S. were converted to LEDs, we could:Prevent the release of green house gases equal to 10 million cars.
Save 15 billion in electricity costs annually.
Decommission 133 coal burning power plants.
Reduce carbon emissions by 158 metric tons & avoid releasing 5,700 pounds of airborne mercury.
•
•
•
•
•
•
Energy savings average 50-80%.
70% efficacy point of a fluorescent is 8000 hours, LED is 50,000 hours.
No maintenance on re-lamping. The storage of bulbs, replacement parts, and the logistics involved are hidden costs to any re-lamping project.
No low-level radiation or damaging UV rays.
Working temperatures of - 40° to 140° Fahrenheit.
LED have an average lifetime 6.2 times longer than fluorescents.
Average lifetime return on investment value 300-500% or more.
Better light quality over lifetime; no flickering.
Low heat emanation means money saved on cooling costs.
LED light is very easy on the eyes. Studies have shown that they can cure Seasonal Affective Disorder as well as increase productivity by 3% or 1 hour a week.
Meets or exceeds Energy Star standards in SSL and meeting the Dark Sky Standards of the IDA.
•
•
•
•
•
•
•
•
•
•
•
Advantages of LED l ighting
�
T8 tube l ights
after
The perfect LED l ighting solution to replace your
existing f luorescents while creating an electrical savings of over 50%
before
�
T8 tube l ights DIP/SMD series
LE
D o
ffice
Wattage 14.4W
Lumens 1154
Approx. Weight 1 lb. 1 oz.
Approx. Length 4 feet
CLGL342 (4' DIP retrofit tube)
Wattage 8W
Lumens 577
Approx. Weight 8 oz.
Approx. Length 2 feet
CLGL174 (2' DIP retrofit tube)
Wattage 12W
Lumens 866
Approx. Weight 14 oz.
Approx. Length 3 feet
CLGLT836 (3' LED tube Bi-pin)
Wattage 19.5W
Lumens 1560
Approx. Weight 1 lb. 5 oz.
Approx. Length 5 feet
CLGLT860 (5' LED tube)
Wattage 24W
Lumens 1920
Approx. Weight 1 lb. 12 oz.
Approx. Length 6 feet
CLGLT872 (6' LED tube)
Wattage 29W
Lumens 2320
Approx. Weight 3 lbs.
Approx. Length 8 feet
CLGLT896 (8' LED tube)
100% recyclable tube
Engineered for use with standard T8 or T12 fixtures
Direct wire voltage, no ballast needed
Heat Wick® heat sink technology
24-hour run hard design
Extensive warranty – 5 years
•
•
•
•
•
•
Customization – Any color, size or design
Poly carb or glass tube options – safe for food prep areas
No hazardous substances – ROHS compliant
No mercury or lead
UL/cUL approved
Manufactured in the USA
•
•
•
•
•
•
Wattage 17W
Lumens 1343
Approx. Weight 1 lb. 1 oz.
Approx. Length 4 feet
CLGL342 (4' SMD retrofit tube)
Il lustration not to scale
�
f lat ceiling panels
after
before
A flood of l ight that looks as beautiful as it is energy eff icient, this f ixture displays
as well as it l ights
�
LE
D o
ffice
f lat ceiling panels series
Aluminum housing
Heat Wick® heat sink technology
24-hour run hard design
Extensive warranty – 5 years
Frosted poly carb shield – safe for food prep areas
Lamp colors – 3300K, 5500K, 6500K
•
•
•
•
•
•
No hazardous substances – ROHS compliant
No mercury or lead
UL/cUL approved
Manufactured in the USA
•
•
•
•
Wattage 38W
Lumens 2280
Approx. Weight 6 lbs. 2 oz.
Approx. Length 2 x 2 feet
CLGL 22 (2' x 2')
Wattage 75W
Lumens 4505
Approx. Weight 12 lbs. 5 oz.
Approx. Length 2 x 4 feet
CLGL 24 (2' x 4')
Wattage 38W
Lumens 2280
Approx. Weight 6 lbs. 2 oz.
Approx. Length 1 x 4 feet
CLGL 14 (1' x 4')
Wattage 19W
Lumens 1140
Approx. Weight 3 lbs.
Approx. Length 1 x 1 feet
CLGL 11 (1' x 1')
I l lustrations not to scale
10
recessed can retrofit
The play of l ight seen from this piece
is unl ike most LED recessed cans
you see on the market
LR6 (3500K) – 108 Watts
LR6 (2700K) – 108 Watts
Compact Fluorescent (18W DTT)* – 180 Watts
*Ballast consumes additional 2w per lamp
Incandescent (65W BR30) – 585 Watts
11
LE
D o
ffice
recessed can retrofit series
Aluminum alloy housing
10-year warranty on housing
Acrylic lens
No hazardous substances – ROHS compliant
•
•
•
•
IP 56
No mercury or lead
UL/cUL approved
Energy Star Certified
•
•
•
•
Wattage LR4E 15: 10.5W
LR4E 30: 11.1W
Lumens LR4E 15: 540
LR4E 30: 515
CLGLR4 (4" recessed can retrofit )
Wattage 12W
Lumens 54.17 LPW
Approx. Weight 3 lbs.
CLGLR6 (6" recessed can retrofit )
The LT6 trim accessories are designed to snap onto LR6 downlight modules and provide a clean aperture appearance.
They are available in a number of color options to compliment the interior design.
They actually decrease high angle brightness with minimal effect on the fixture output.
CLGLR6 (retrofit tr im)
The SC6 is a cylindrical surface mounted housing designed to accommodate the LR6-GU24. The SC6 expands the application of the LR6 to locations where it is not possible to recess into the ceiling.
CLGLR6 (surface mount housing)
The LR4 is a recessed architectural downlight designed for use in commercial and residential applications. The LR4 generates white light with LEDs in a new way that enables an unprecedented combination of light output, efficacy, beautiful color and affordability.
CLGLR4 (retrofit tr im)
12
The same look of your existing l ighting, energy eff icient, years
of maintenance free applications
and high CRI of LED l ight
high bay l ine
13
LE
D w
are
ho
use
high bay l ine
100% recyclable materials
Hook and eye hanging system
Heat Wick® heat sink technology
24-hour run hard design
Extensive warranty – 5 years
No on/off hour rating specifications
Works with existing occupancy sensing technology
IP rating 65
•
•
•
•
•
•
•
•
No hazardous substances – ROHS compliant
No mercury or lead
•
•
Wattage 34W
Lumens 2556
Effective Lumen Output 100-150W
Approx. Weight 3 lbs. 9 oz.
Revolutionary 30W chip array
CLW 30 (70-100W)
Wattage 44W
Lumens 3312
Effective Lumen Output 100-150W
Approx. Weight 3 lbs. 9 oz.
Revolutionary 40W chip array
CLW 40 (100-150W)
Wattage 57W
Lumens 3827
Effective Lumen Output 200-250W
Approx. Weight 3 lbs. 9 oz.
Revolutionary 50W chip array
CLW 50 (125-175W)
Wattage 68W
Lumens 4933
Effective Lumen Output 175-250W
Approx. Weight 4 lbs. 5 oz.
Revolutionary 60W chip array
CLW 60 (175-250W)
Wattage 76W
Lumens 5179
Effective Lumen Output 320W
Approx. Weight 5 lbs.
Revolutionary 70W chip array
CLW 70 (250-320W)
Wattage 108W
Lumens 8121
Effective Lumen Output 400W
Approx. Weight 6 lbs. 4 oz.
Revolutionary 100W chip array
CLW 100 (400W)
1�
high bay tubes
after
before
A highly eff icient and cost effective way
to deploy one of our best sel l ing products,
our CLGL LED T8 Tubes
15
LE
D w
are
ho
use
high bay tube series
I-beam fluorescent high bay
Fixture 100% efficacy
Wide destribution (120˚)
Heavy gauge steel
Extensive warranty – 5 years
•
•
•
•
•
No ballast for quick installation of LED tube lights
UL/cUL approved
Manufactured in the USA
•
•
•
Wattage 102W
Lumens 8058
6 x T8 SMD LED tubes (CLGL 342 - SMD)
6 lamp open (6 x T8 SMD tubes)
Wattage 68W
Lumens 5372
4 x T8 SMD LED tubes (CLGL 342 - SMD)
4 lamp open (4 x T8 SMD tubes)
Wattage 58W
Lumens 4616
4 x T8 DIP LED tubes (CLGL 342 - DIP)
4 lamp open (4 x T8 DIP tubes)
Wattage 87W
Lumens 6924
6 x T8 DIP LED tubes (CLGL 342 - DIP)
6 lamp open (6 x T8 DIP tubes)
1�
CLGL is proud to present the largest l ine of
outdoor l ighting products avai lable to the marketplace
wall pack series
after
before
1�
LE
D o
utd
oo
rwall pack series
Aluminum alloy housing – glass lens
Heat Wick® heat sink technology
24-hour run hard design
Extensive warranty – 7 years
•
•
•
•
10-year warranty on housing
No hazardous substances – ROHS compliant
No mercury or lead
UL/cUL approved
Manufactured in the USA
•
•
•
•
•
Wattage 80W
Lumens 3224
Approx. Weight 11 lbs. 11 oz.
CLGL WP88 (400W HID EQ.)
Wattage 27W
Lumens 1118
Approx. Weight 6 lbs. 8 oz.
CLGL WP27 (150W HID EQ.)
Wattage 23W
Lumens 1100
Approx. Weight 5 lbs. 6 oz.
CLGL WP20 (100-125W HID EQ.)
Wattage 17W
Lumens 850
Approx. Weight 4 lbs. 2 oz.
CLGL WP15 (70-100W HID EQ.)
Wattage 56W
Lumens 1118
Approx. Weight 6 lbs. 8 oz.
CLGL WP56-FC (250W HID EQ./Ful l cut-off)
9”
13 3/4”
8”
17”
16”
1�
canopy series
Aluminum alloy housing
Acrylic lens.
24-hour run hard design
No hazardous substances – ROHS compliant
•
•
•
•
Extensive warranty – 5 years
10-year warranty on housing
IP rating 56
No mercury or lead
•
•
•
•
Wattage 150W
Lumens 9800
Approx. Weight 29 lbs
GSC 150
(gas station canopy)
Wattage 120W
Lumens 7800
Approx. Weight 28 lbs 2 oz
GSC 120 & GSC 120 24-hr
(gas station canopy)
Wattage 100W
Lumens 6500
Approx. Weight 27 lbs
GSC 100 & GSC 100 24-hr
(gas station canopy)
1�
LE
D o
utd
oo
r
flood light series
Aluminum alloy housing
Glass lens.
5000K standard
24-hour run hard design
Extensive warranty – 5 years
10-year warranty on housing
•
•
•
•
•
•
IP rating 65
No hazardous substances – ROHS compliant
No mercury or lead
Beam angle options are 40°, 80°, 120° 80° (standard)
•
•
•
•
Wattage 140W
Lumens 9380
Approx. Weight 13 lbs.
FLOOD 04
(U-bracket mounting spot l ight)
Wattage 82W
Lumens 5494
Approx. Weight 12 lbs. 6 oz.
FLOOD 03
(U-bracket mounting spot l ight)
Wattage 70W
Lumens 4690
Approx. Weight 11 lbs. 4 oz.
FLOOD 02
(U-bracket mounting spot l ight)
Wattage 38W
Lumens 2584
Approx. Weight 9 lbs. 10 oz.
FLOOD 01
(U-bracket mounting spot l ight)
20
STLX series
With l ight focused on the roadway, glare and night
vision associated with types of tradit ional street
l ighting are el iminated
afterbefore
Wattage 66W
Lumens 3601
Approx. Weight 9 lbs. 1 oz.
STLX 2 (175W HID Equivalent)
Wattage 151.1W
Lumens 7151
Approx. Weight 15 lbs. 4 oz.
STLX 4 (250W HID Equivalent)
Wattage 209.3W
Lumens 10,730
Approx. Weight 19 lbs. 3 oz.
STLX 6 (400-700W HID Equivalent)
Wattage 281W
Lumens 13,408
Approx. Weight 24 lbs. 1 oz.
STLX 8 (700-1000W HID Equivalent)
21
LE
D stre
et
STLX series
Aluminum housing – all weather design
Patented roadway optics
Heat Wick® heat sink technology
No hazardous substances – ROHS compliant
•
•
•
•
Extensive warranty – 7 years
10-year warranty on housing
5500K and IP 65
No mercury or lead
•
•
•
•
Wattage 31W
Lumens 2077
Approx. Weight 3 lbs. 9 oz.
STL RET (LED street l ight retrofit )
Mogul or Edison Base
Heat Wick® heat sink technology
No hazardous substances – ROHS compliant
•
•
•
Extensive warranty – 5 years
No mercury or lead
•
•
22
The STL series is designed to stay
in-tune with current roadway l ighting f ixtures
around the world
STL series
23
LE
D stre
et
STL series
Weatherproof housing/finish
Poly carb drop-down lens
Tool-less entry
Heat Wick® heat sink technology
No hazardous substances – ROHS compliant
•
•
•
•
•
Extensive warranty – 7 years
10-year warranty on housing
No mercury or lead
100% recyclable head
•
•
•
•
Wattage 88W
Lumens 6810
Approx. Weight 6 lbs. 8 oz.
STL 80 (250-400W HID Equivalent)
Wattage 58W
Lumens 4250
Approx. Weight 4 lbs. 1 oz.
STL 50 (175-250W HID Equivalent)
Wattage 39W
Lumens 2550
Approx. Weight 3 lbs. 2 oz.
STL 30 (100-150W HID Equivalent)
2�
courtyard series
The Courtyard series is a versati le f it for the Lamp Post
series and is an easy way to retrofit your f ixture to a
LED fixture
25
LE
D stre
et
courtyard series
100% recyclable materials
360˚ viewing angle
Glass tubes with ABS base
Heat Wick® heat sink technology
24-hour run hard design
•
•
•
•
•
Extensive warranty – 5 years
No hazardous substances – ROHS compliant
No mercury or lead
Lifetime >50,000 hrs/70% efficacy point
•
•
•
•
Wattage 38W
Lumens 2600
Approx. Weight 1 lb. 7 oz.
CYS 40 (100-150W l ighting equivalent)
Wattage 25W
Lumens 1625
Approx. Weight 1 lb. 7 oz.
CYS 25 (75-100W l ighting equivalent)
Wattage 18W
Lumens 1170
Approx. Weight 12 oz.
CYS 18 (60W l ighting equivalent)
2�
LED bulbs
2�
LE
D b
ulb
sLED bulbs – replacements
Heat Wick® heat sink technology
Durable die-cast aluminum
No hazardous substances – ROHS compliant
•
•
•
24-hour run hard design
Extensive warranty – 5 years
No mercury or lead
•
•
•
Wattage 6.5W (cree 3x3W chips)
Lumens 293
Approx. Weight 7 oz.
MR16x9
Wattage 4.5W (cree 3x2W chips)
Lumens 203
Approx. Weight 7 oz.
MR16x6
Wattage 6.5W (cree 3x3W chips)
Lumens 293
Approx. Weight 7 oz.
PAR20x9-ND & PAR20x9-D
Wattage 8W (cree 7x2W chips)
Lumens 360
Approx. Weight 9 oz.
PAR30x14-ND & PAR30x14-D
Wattage 16.5W (cree 12x2W chips)
Lumens 725
Approx. Weight 1 lb. 3 oz.
PAR38x36-ND & PAR38x36-D
Wattage 13W (cree 12x2W chips)
Lumens 585
Approx. Weight 1 lb. 3 oz.
PAR38x24-ND & PAR38x24-D
Wattage 11.5W (cree 7x3W chips)
Lumens 518
Approx. Weight 9.6 oz.
PAR30x21-ND & PAR30x21-D
2�
The Retrofit Series is perfect for the Lamp Post Series
of l ighting. The retrofit for these bulbs is a very simple,
easy way to retrofit your f ixture to an LED fixture
LRP series
after before
after
before
2�
LE
D re
trofit
LRP series
Heat Wick® heat sink technology
Cree chips
24-hour run hard design
No hazardous substances – ROHS compliant
•
•
•
•
Extensive warranty – 7 years
No mercury or lead
UL/cUL approved
Manufactured in the USA
•
•
•
•
Wattage 85W
Lumens 5099
Approx. Weight 6 lbs. 6 oz.
LRP 88X (replacement of up to a 400W HID)
Wattage 85W
Lumens 4312
Approx. Weight 6 lbs. 6 oz.
LRP 88 (replacement of up to a 400W HID)
Wattage 56W
Lumens 2216
Approx. Weight 4 lbs. 4 oz.
LRP 56 (replacement of up to a 250W HID)
Wattage 27W
Lumens 1444
Approx. Weight 2 lbs. 2 oz.
LRP 27 (replacement of up to a 150W HID)
30
terms of payment
Clean Light Green Light LLP is the sole receiver of payments.
Our terms of receiving payment are:
Wire transferBelow are the domestic (USA) and international accounts and codes:
Address:
The Huntington National Bank 41 S High Street, Columbus, OH 43215, USA
Domestic wires (non-Global)
Account Number: 01381790711 Routing number: 044000024
International wires (non-Global)
Account Number: 01381790711 Swift code: HUNTUS33 Company or certified cashiers check. Checks will need 7-10 days to clear. Payable to Clean Light Green Light LLP.
Letter of creditA letter of credit can be obtained by the customer at their discretion. You can obtain this by way of your trusted financial institution and should be made in favor of Clean Light Green Light LLP. There are some extra percentage fees imposed by your bank and/or agents working on your behalf in the country of origin.
How a letter of credit works. Your bank of trust will use your good standing to levy a letter of credit in favor of Clean Light Green Light. Upon completion of a common set of standards – usually a packing list and a bill of lading from the Steam Ship Line – the bill is to be paid in full to the issuing bank. This mechanism is in place for first time customers who might not be aware of our exceptional quality or superb reputation. This course of action can help calm perceived risk for customers at the buyers expense. Clean Light Green light will not subsidize any portion of L/C fees and/or agent fees.
Ask your LED agent about our lease-to-own program.
31
At Clean Light Green Light we special ize in helping our cl ients reduce their energy consumption while helping them to keep
more of their hard earned money
energy savings averages 50-80%
average l i fet ime return on investment value is 300-500% or more
better l ight qual ity over l i fet ime – no f l ickering
low heat emanation means money saved on cooling costs
LEDs have an average l i fet ime 6.2 t imes longer than f luorescents
meets or exceeds Energy Star standards in SSL and meeting the Dark Sky standards of the IDA
•
•
•
•
•
•