LESSON PLAN
Faculty Harish Kumar
Discipline Electronics & Communication Engg.
Semester 6th
Subject Wirless & Mobile Communication
Lesson Plan Duration
15 WEEKS(From January 2018 to April 2018)
Work Load (Lecture) / Practical per week (in hours)
Theory - 04, Practical - 03
Week Theory Practical
Lect. Day Topic Practical Day Topic
1st
1st Basics of Wireless Communication
1st (3 Hours)
Introduction to wireless & Mobile
communication and systems
2nd Advantages of wireless communication
3rd Electromegnetic waves
4th Frequency Spectrum used
2nd
1st Paging system
2nd (3 Hours)
Study the features, specification and
working of cellular mobile
2nd Cordless Telephone System
3rd Cellular Telephone System
4th Communication between base station & mobile in a cellular telephone system
3rd
1st Definitions related with wirless communication
3rd (3 Hours)
Signal strength measurement of
various points from a transmitting
antenna/cordless phone
2nd Comparison of Pager, Cordless telephone and Cellular telephone systems
3rd Revision, Assignment of Unit - 1
4th First Generation cellular telephone system
4th
1st Second Generation cellular telephone system
4th (3 Hours)
Revision and internal viva
2nd Third Generation cellular telephone system
3rd Fourth Generation cellular telephone system
4th Revision, Assginment of Unit - 2
5th
1st Test of Unit - 1 & 2
5th (3 Hours)
Visit of a Mobile Switching Centre
(MSC) in the nearest M.S. Facility
provider
2nd Cellular Concept & Cell Area
3rd Fundamental Concepts of Cellular Telephone
4th Cellular Capacity and frequency reuse concept
6th
1st Frequency reuse factor
6th (3 Hours)
Demonstration of Base Trans Receiver (BTS) with nearby
cellular tower
2nd Interference,Co-Channel Interference
3rd Adjacent-Channel Interference
4th Power Control for Reducing Interference
7th
1st Improving Coverage and Capacity in Cellular System
7th (3 Hours)
Observing call processing of GSM
trainer Kit
2nd Revision, Assignment of Unit - 3
3rd Multiple Access Techniques for Wireless Communication
4th Introduction to Multiple Accesses
8th
1st Frequency Division Multiple Access (FDMA)
8th (3 Hours)
Revision and internal viva
2nd Features of FDMA
3rd Tme Division Multiple Access (TDMA)
4th Features of TDMA
9th
1st Efficiency of TDMA, No. of Channel in TDMA System
9th (3 Hours)
Observing call processing of CDMA
trainer Kit
2nd Code division multiple access (CDMA)
3rd Features of CDMA
4th Space Division multiple access (SDMA)
10th
1st Spread Spectrum Multiple Access (SSMA)
10th (3 Hours)
Revision
2nd Frequency Hopping Spread Spectrum (FHSS)
3rd Comparison of FDMA/TDMA/CDMA
4th Revision, Assignment of Unit- 4
11th
1st Test of Unit - 3 & 4
11th (3 Hours)
Pairing of two devices using
Bluetooth
2nd Introduction to Mobile communication systems
3rd Introduction of Global system for mobile communication (GSM)
4th GSM Features
5th GSM Services
12th
1st GSM System Architecture
12th (3 Hours)
Revision
2nd Introduction of CDMA System
3rd Spread Spectrum Multiple Access
4th Comparison between CDMA and GSM Systems
13th
1st Introduction to GPRS
13th (3 Hours)
Data transfer using Wi-Fi
2nd Introduction to GPS
3rd GPS Services
4th Introduction to Bluetooth
14th
1st Introduction to Wi-Fi
14th (3 Hours)
Revision and internai viva
2nd Revision, Assignment of unit - 5
3rd Introduction to Digital and Data Communication
4th Block Diagram of Digital & Data Communication System
15th
1st Advantages of Digital communication
15th (3 Hours)
Value aided experiments
2nd Comparison of Digital Data Communication system with Analog communication system
3rd Revision, Assignment of Unit - 6
4th Test of Unit - 5 & 6
Government Polytechnic for Women Sirsa
Name of Faculty: Sh. Raj kumar
Discipline: Electronics and Communication Engineering
Semester: 6
Subject: ENTREPRENEURSHIP DEVELOPMENT AND MANAGEMENT
Lesson Plan Duration: 45 DAYS
WEEK THEORY Topic
1st week
Day 1 ENTREPRENEURSHIP Concept /Meaning and its need
day 2 Qualities and functions of entrepreneur and barriers in entrepreneurship
day 3 Sole proprietorship and partnership forms of business organizations
2nd week
day 4 Schemes of assistance by entrepreneurial support agencies at National, State
day 5 Schemes of assistance by entrepreneurial support agencies at DISTRICT level
day 6 organisation: NSIC, NRDC, DC, MSME, SIDBI, NABARD
3rd week
day 7 Commercial Banks, SFC’s TCO, KVIB, DIC, Technology Business Incubators (TBI) and Science and Technology Entrepreneur Parks
day 8 Scanning of the business environmentMarket Survey and Opportunity Identification
day 9 Salient features of National and State industrial policies and resultant Types and conduct
of market surveybusiness opportunities
4th week
day 10 Assessment of demand and supply in potential areas of growth
day 11 Identifying business opportunity
day 12 Considerations in product selection
5th week
day 13 Preliminary project report Project report Preparation
day 14 Detailed project report including technical, economic and market feasibility
day 15 Common errors in project report preparations
6th week
day 16 Exercises on preparation of project report
day 17 Introduction to Management and its need
day 18 Definitions and importance of management
7th week
day 19 Functions of management: Importance and process of planning, organising, staffing, directing and controlling
day 20 Principles of management (Henri Fayol, F.W. Taylor)
day 21 Concept and structure of an organization
8th week
day 22 Types of industrial organisations a) Line organization
day 23 b) Line and staff organisation c) Functional Organisation
day 24 Leadership Definition and Need Qualities and functions of a leader
day 25 Types of leadership Manager Vs leader
9th week
day 26 Motivation Definitions and characteristics
day 27 Factors affecting motivation Theories of motivation (Maslow, Herzberg, Douglas, McGregor)
10th day 28 Management Scope in Different Areas Human Resource Management
week day 29 Introduction to Man power planning, recruitment and selection Introduction and objective
day 30 Doubt will be taken
11th week
day 31 Introduction to performance appraisal methods
day 32 Introduction functions Material and Store Management
day 33 ABC Analysis and EOQ objectives
12th week
day 34 Introduction, importance Marketing and sales
day 35 Physical distribution and its functions
day 36 Introduction to promotion mix Sales promotion
13th week
day 37 Introductions, importance and its functions Financial Management
day 38 Elementary knowledge of income tax, sales tax, excise duty, custom duty and VAT
day 39 Miscellaneous Topics Customer Relation Management (CRM)
14th week
day 40 Definition and need ,Types of CRM
day 41 Statistical process control Total Quality Management (TQM)
day 42 Just in time (JIT) Total employees Involvement
15th week
day 43 Intellectual Property Right (IPR)
day 44 Introductions, definition and its importance
day45 Infringement related to patents, copy right, trade mark
Name of The Faculty:
Sh.Vikramaditya
Discipline : ECE Semester : 4th Subject : Maintenance of computer system
Lesson plan
duration:
15 weeks (from january,2018 to april,2018)
Week
Theory Practical
Lecture day Topic including assignment test
Practical day Topic
1st
1st Introduction to different type
of motherboard
1st Operation,maintenance,install
ation and testing of monitor 2nd Single Board based system
3rd Block diagram of motherboard
4th installation of computer
system
2nd
5th Assignment: Motherboard
2nd Operation,maintenance,install
ation and testing of HDD patitioning and formating
6th Test
7th Different Types of buses
8th PCI
3rd
9th SCSI
3rd Operation,maintenance,install
ation and testing of DOT matrix printer
10th Serial and Parrallel Ports (COM
ports)
11th Ports COM1,LPT1
12th USB
4th
13th RS 232 C
4th Operation,maintenance,install
ation and testing of laser printer
14th use of computer for
instrumentation
15th Assignment:Buses and Ports
16th Test
5th
17th Principle and contruction of HDD
5th Revision 18th Floppy Disk Controller
19th Hard disk controller
20th Pen Drives
6th
21st common faults of HDD
6th motherboard based on latest
microprocessor and chipsetCMOs set up
22nd common faults of FDD
23rd RAM module
24th Assignment:HDD,FDD
7th
25th Test
7th DVD-ROM/DVD writer
26th Block diagram of keyboard
controller
27th Keyboard switches
28th Keyboard faults
8th
29th Mouse
8th connectors and cables 30th common faults of mouse
31st optical mouse
32nd scanner, digitizer
9th
33rd computer monitor block
diagram
9th Revision 34th
difference between TV and Computer Monitor
35th video display
adaptor(monochrome)
36th video display adaptor(colour)
10th
37th introduction to solid state
displays
10th MODEM/ROUTER/SWITCHES 38th
Assignment:CRT display Devices
39th Test
40th Printing mechanism
11th
41st Dot matrix printer
11th Installation of any operating
system 42nd inkjet printer
43rd laser printer
44th printer controller
12th
45th centronics interface
12th establish LAN/WLAN using
networkin devices 46th
signals from PC to printer and printer to PC
47th Assignment:Printer
48th Test
13th
49th introduction to networking
devices
13th Revision 50th LAN
51st WAN
52nd wi-fi,WLAN
14th
53rd Router
14th Study of Laptop,IPAD and
smart phone
54th switches
55th HUB
56th Modems
15th
57th need and functions of Modems
15th Revision 58th
Laptops their need and applications
59th Assignment:Modem
60th Test
LESSON PLAN
Name of Faculty : KRISHAN KUMAR
Discipline :ELECTRONICS & COMMUNICATION ENGG
Semester : 6th
Subject : MEDICAL ELECTRONICS
Work Load : Lecturer - 04, Practical - 06
Week Lecture Day
Practicals Week Practical Day Practicals
Topic Topic
1 1 INTRODUCTION TO SUBJECT IMPORTANCE / NEED, SYLLABUS CONATENTS REFERENCE BOOKS
1 1ST INTRODUCTION ABOUT SYLLABUS SUBJECT INTRODUCTION ABOUT SYLLABUS SUBJECT
2 UNIT-1: Anatomy and physiology · Elementary ideas of cell structure, VARIOUS ORGAN SYSTEMS
3 Heart and circulatory system.
4 Central nervous system
2 5 Muscle action · Respiratory system
2 2ND INTRODUCTION BRIEFING ABOUT THE COMPONENTS, KIT, APPARATUS THAT WILL BE USED IN THE SUBJECT
6 Body temperature and reproduction system
7 OVERVIEW OF UNIT-1, DISCUSSION OF IMPORTANT QUESTIONS REGARDING EXAMS POINT OF VIEW REVISION
8 Overview of Medical Electronics Equipments- CONTENTS OF UNIT, BIO-MEDICAL INSTRUMENTATIONS SYSTEM GROUP-TYPE OF MEDICAL MEASUREMENTS, PERFORMANCE REQUIREMENT OF MEDICAL EQUIPMENT, CLASSIFICATION OF MEDICAL EQUIPMENTS
3 9 diagnostic Equipments , X-RAYS 3 3RD TO OPERATE & FAMILIRISATION OF B.P. APPARATUS
10 ULTRASONOGRAPHY
11 COMPLETE TOMOGRAPHY
12 MAGNETIC RESONANCE IMAGING (PRINCIPLES, MACHINES, COMPONENTS, APPLICATIONS, ADVANTAGES & DISADVANTAGES OF THE ABOVE
4 13 clinical laboratory equipment- TYPES, CALORIMETER, SECTROPHOTOMATRY
4 4TH TO OPERATE & FAMILISATION OF ECG MACHINE 14 FLAME PHOTOMETER, KYMOGRAPH,
ELECTROPHORESIS
15 THEREPEUTIC EQUIPMENTS - TYPES HEAMODIALYSIS, ANAESTHESA MACHINES, OPERATION
16 VENTILATOR, HEART LUNG MACHINE, HEARING AIDS, NEBULIZER- OPERATION APPLICATION
5 17 UNIT-3: ELECTRODES-CONTENTS OF UNIT, BIO-ELECTRIC SIGNALS-SOURCES, TYPES ORIGIN
5 5TH TO MEASURE THE CONCENTRATION OF BLOOD SUGAR WITH 18 BIO ELECTRODES, PROPERTIES OF BIO-
ELECTRODES, ELECTRODES GLUCOMETER (FASTING, P.P RANDOM)
19 ELECTRODE-TISSUE INTERFACE-METAL ELECTROSYTE INTERFACE, ELECTROLYTE SKIN INTERFACE, ELECTRODE MODEL CKT
20 CONTACT IMPEDANCE, TYPES OF ELECTRODES-ELECTRODES ON THE BASIS OF ELECTEODE ACTION, PLACE OF USE , APPLICATION
6 21 ELECTRODES USED FOR ECG, EEG, EMG, EEG ELECTRODES, EEG ELCTRODES-TYPES, BRIEF DESCRIPTION
6 6TH TO MEASURE THE RESPIRATION RATE
22 OVERVIEW, DISCUSSION OF IMPORTANT QUESTION REGARDING EXAMS POINT OF VIEW REVISION
23 ASSIGNMENT-1, DISCUSSION & DOUBT CLEARANCE OF UNIT-1,2,3
24 UNIT-4: PHYSICAL LOGICAL TRANSDUCERS: INTRODUCTION, CONTENTS OF TRANSDUCERS USE OF TRANSDUCERS FOR DIFFERENT SIGNAL PARAMETERS
7 25 PERFORMANCE CHARACTERSTICS OF TRANSDUCERS-STATIC, DNAMIC, OTHER CHARACTERISTICS, TRANSDUCER SELECTION CRITERIA
7 7TH TO MEASURE THE PULSE RATE
26 PHYSICLOGICAL SENSORS / TRANSDUCERS- IDEA, TYPES, PRESSURE TRANSDUCER STRAIN GUAGE, LVDT
27 PRESSURE TRANSDUCER- CAPACITIVE PRESSURE PIEZOELECTRIC PRESSURE TRANSDUCERS. FLOW TRANSDUCERS-IDEA
28 TYPE OF FLOW TRANSUDERS. EXPLANATION
8 29 TEMPERATURE TRANSUDERS- TYPES EXPLANATION
8 8TH INSTALLATION OF SMALL MEDICAL EQUIPMENT IN LABS OF HOSPITAL PRECAUSTIONS TO BE TAKEN
30 PULSE SENSORS-TYPES, EXPLANATION
31 RESPIRATION SENSORS-TYPES EXPLANATION REVISION & DISCUSSION OF UNIT-4
32 ASSIGNMENT -2, ORAL TEST OF UNIT-4
9 33 UNIT-5: BIO MEDICAL RECORDERS INTRODUCTION, CONTENTS OF UNIT, ECG, BASICS, WAVEFORM, INTERPRETATION OF HUMAN ECG, ELECTRODES & LAB FOR ECG
9 9TH STUDY OF LARGE MEDICAL EQUIPMENT IN HOSPITAL NURSING HOME
34 PROCESS/METHODS OF RECORDING ECG, ECG MACHINE / RECORDER-DESCRIPTION, TYPES OF ECG RECORDER, FACTORS THAT AFFECT NORMAL ECG, APPLICATIONS OF ECG, MERITS & DEMERITS
35 EEG-BASIC CONCEPT, BIOELECTRIC SIGNALS FROM BRAIN, ELECTRODE PLACEMENT, EEG RECORDING MODES, METHOD/PROCESS OF EEG RECORDING , EEG MACHINE, APPLICATION , MERITS & DEMERITS
36 ELECTROMYOGRAPHY-EMG M/C TYPES OF EMG, APPLICATION, ADVANTAGES
10 37 REVISION OF UNIT-5, DISCUSSION OF IMPORTANT QUESTIONS REGARDING EXAM POINT OF VIEW
10 10TH OPERATION & USE OF ELECTRO PHYSIOTHERAPY
38 DOUBT CLEARENCE, DISCUSSION & EXPLANATION OF TOPICS THAT STUDENTS WANT TO REPEAT
39 UNIT-6: PATIENT MONITORING SYSTEMS INTRODUCTION, CONTENTS OF UNIT, NEED/IMPORTANCE
40 HEART RATE MEASUREMENT - DIFF. METHODS
11 41 PULSE RATE MEASUREMENT - DIFFERENT TYPES & METHODS
11 11TH MAINTENANCE SCHEDULE FOR DIFFERENT EQUIPMENT & THEIR RECORDS IN HOSPITAL
42 RESPIRATION RATE MEASUREMTN- DIFFERENT METHODS
43 BLOOD PRESSURE MEASUREMENT- DIRECT METHODS, INDIRECT ( NON-INVASIVE)
44 ADVANTAGES, DISADVANTAGES OF METHODS OVER EACH OTHER COMPARISON
12 45 PACEMAKEER-NEED, EXPLANATION , COMPARISON BETWEEN EXTERNAL & INTERLA PACEMAKER; APPLICATIONS
12 12TH REPEAT OF EXPERIMENTS OF 1,2,3 (FOR ABSENTEE STUDENTS EARLIER)
46 DEFIBRILLATOR- IMPORTANCE, TYPES OF ELECTRODES USED IN IT, CLASSIFICATION OF DEFIBRILLATORS
47 USE OF MICROPROCESSOR IN PATIENT MONITORING, REVISION OF TOPICS STUDIED IN UNIT-6
48 DISCUSSION OF IMPORTANT QUESTIONS FROM EXAM POINT OF VIEWS, ASSIGNMENT-3
13
49
UNIT-7: SAFETY ASPECTS OF MEDICAL INSTRUMENTS-NEED, IMPORTANCE EFFECTS OF ELECTRICAL CURRENT ON THE HUMAN BODY- PHYSIOLOGICAL, PSYCHOLIGICAL
13 13TH REPEAT OF EXPERIMENTS OF 4,5,6 (FOR ABSENTEE EARLIER)
50 SAFETY ASPECTS OF CURRENT- GROSS SHOCK, MICRO CURRENT SHOCK
51 LEAKAGE CURRENTS- TYPES, PRECAUTIONS TO MINIMISE ELECTRIC SHOCK HAZARDS.
52 METHODS OF ACCIDENT PREVENTION, TESTING OF BIOMEDICAL EQUIPMENTS
14 53 SPECIAL DESIGNS FROM SAFETY CONSIDERATION, SEFETY STANDARDS
14 14TH REPEAT OF EXPERIMENTS -7 (FOR ABSENTEE EARLIER) 54 REVISION OF TOPICS STUDIED IN UNIT-7
55 ASSIGNMENT-4, DISCUSSION OF IMPORTANT QUESTIONS REGARDING EXAMS POINT OF VIEW
56 DOUBT CLEARANCE, DISCUSSION OF TOPICS THAT STUDENTS WANT TO DISCUSS
15 57
REVISION OF UNITS-6,7 ; DISCUSSION & EXPLANATION OF TOPICS THAT STUDENTS OF TOPICS THAT STUDENTS WANT TO REPEAT
15 15TH REPEAT OF EXPERIMENTS OF EARLIER ABSENTEE
58 REVISION OF UNIT-4,5; DISCUSSION & EXPLANATION OF TOPICS THAT STUDENTS OF TOPICS THAT STUDENTS WANT TO REPEAT
STUDENTS
59 REVISION OF UNIT-1,2,3; DISCUSSION & EXPLANATION OF TOPICS THAT STUDENTS OF TOPICS THAT STUDENTS WANT TO REPEAT
60 PAPER ATTEMPTION TIPS, IMPORTANT QUESTION REGARDING EXAMS POINT OF VIEW
Lesson Plan (ES II)
Name of the Faculty: Krishan Kumar
Discipline: Electronics and Communication Engg.
Semester: 6th
Subject : ES-II
Lesson Plan Duration: (From Jan, 2018 to April, 2018)
Work Load (Lecture/Practical) per week (In hour): Practical-02
Week
Theory Practical
Lecture Day Topic(including assignment/Test) Practical Day
Topic
1st 1st Moke Interview: Discussion of general questions asked in the interviews.
2nd 2nd Moke Interview: Discussion on the proper answers.
3rd 3rd Moke Interview.
4th 4th Preparing for meeting: Writing the agenda of the meeting, list of key persons, orders of the meeting.
5th 5th Preparing for meeting: Views of all the members; a discussion.
6th 6th Preparing for meeting: Minutes of the meeting.
7th
7th
Group discussion ( Assignment of topics)
8th 8th Group Discussion
9th 9th Group Discussion
10th 10th Seminar ( Division of topics)
11th 11th Seminar
12th 12th Seminar
13th 13th Making a presentation
(Elements of good presentation)
14th 14th Making a presentation
(Structure and tools of presentation)
15th 15th Making a presentation (Paper
reading)
16th 16th Making a presentation(Power point presentation)