Page 1 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Level 1 Certificate of Conformity

Australian Certification Services Pty Ltd grants to the WaterMark User:

Plastec Australia Pty Ltd the right to use the WaterMark as shown above in conjunction with the Certificate No. on product/s as identified in the

WaterMark Schedule and as listed on the WaterMark database www.abcb.gov.au/Product-Certification/WaterMark-

Certification-Scheme which have been shown to comply with the relevant Standard/s and level of certification referred

to below. The WaterMark User is granted a licence to use the WaterMark subject to the rules governing the use of the

WaterMark.

Product Type: Waste Fittings

Brand: PLASTEC

Evaluated to: AS 2887:1993 Plastics waste fittings

WMTS 040:2016 Waste pipe connection outlets and gratings separate or integral

AS/NZS 1260:2009 PVC pipes and fittings for drain waste and vent application

Issue Date 7th September 2017 Paul Greig

Initial Issue Date: 9th June 2009 General Manager

Expiry Date: 8th June 2019

Certificate No.: 239

This certificate remains the property of Australian Certification Services Pty Ltd

WaterMark Level 1 certification is a conformity assessment scheme based on ISO Guide 67 (system 5)

Page 2 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

WaterMark Certification Schedule

The WaterMark User Plastec Australia Pty Ltd

2-4 Enterprise St Caloundra Queensland 4551 AUSTRALIA

Website: www.plastec.com.au

Certificate Number 239

Certification Standards: AS 2887:1993 Plastics waste fittings

Product Listing

Model

Identification Brand Name Product Description Material Designation

8502 Plastec DN100 PVC-U Pipe to Earthenware Adaptor ABS

11405 Plastec DN 100 Pan Collar Straight PP TPE

11406 Plastec DN 100 Pan collar Offset 20 PP TPE

11407 Plastec DN 100 Pan Collar Offset 40 PP TPE

11511 Plastec DN 100 90 Degree Pan Bend with Extended

Bracket PP TPE

11512 Plastec DN 100 90 Degree Pan Bend with Extended

Bracket PP TPE

16554 Plastec DN50x40 Trap Adaptor ABS

11620 Plastec DN 100 Pan Collar Offset 20 PP TPE ABS

11620 Plastec DN 100 Adjustable Pan Connector 0 to 40 ABS

11622 Plastec DN 100 Adjustable Pan Connector Offset 60

Recessed ABS

11624 Plastec DN 100 Pan Collar No Offset PP ASA TPE

11651 Plastec DN 100 Pressure Relief Open Grate DT Surround ASA Stainless steel

11656 Plastec DN 100 Pressure Relief Waste and Grate DT

Surround ASA

Page 3 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

11657 Plastec DN 100 Pressure Relief Open Grate DT Surround ASA Stainless steel

11666 Plastec DN 100 Finishing Collar Open Stainless ASA Stainless Steel

11667 Plastec DN 100 Finishing Collar Open Male ASA

11670 Plastec DN 100 Overflow Relief Grating PP ASA

11680 Plastec DN 100 Inspection Opening Kit ASA NR70

11686 Plastec DN 100 Bolted Trap Screw with Brass Lid Female

Socket Connection ASA NR70

11686 Plastec DN 100 Bolted Trap Screw Female Stainless steel ASA

Brass

11687 Plastec DN 100 Bolted Trap Screw with Brass Lid Chrome

Plated Female Socket Connection ABS/ASA

11688 Plastec DN 100 Bolted Trap Screw Assembly Brass Lid ASA/Brass

11706 Plastec DN 100 Inspection Opening ASA NR70 SS

11707 Plastec DN 100 Inspection Opening ASA Stainless steel

11736 Plastec DN 40 Cap and Lining Flexible Hose Kit TPE ABS PP NR70

11789 Plastec DN 80 x 50 Shower Waste Plastic Body ABS

11789 Plastec DN 80 x 50 Shower Waste Plastic Body Chrome

Plated ABS

11793 Plastec DN80 x 50 Shower Waste Plastic Body Chrome

Plated ABS

11795 Plastec DN 40 x DN 32 Threaded Reducer Nut PP NCR70

11960 Plastec DN 40 Plug and Waste Adaptor Hand Tighten Nut PP TPE ABS

11961 Plastec DN 50 Plug and Waste Adaptor PP TPE ABS

11962 Plastec DN 50 x DN 40 Plug and Waste Adaptor PP TPE ABS

Page 4 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

11964 Plastec DN 50 Elbow and Nut fitting PP ASA TPE

11970 Plastec DN 40 Plug and Waste Adaptor Wrenching Flats PP TPE ABS

11981 Plastec DN 40 Cap and Lining extension PP ASA TPE

11982 Plastec DN 50 Cap and Lining extension PP ABS TPE

11987 Plastec DN40 Cap and Lining Extension 200mm PP ABS TPE

11988 Plastec DN 50 Cap and Lining extension 200mm PP ABS TPE

12494 Plastec DN 100 x DN 80 Pipe Elbow ABS

12495 Plastec DN 100 x DN 50 Pipe Elbow ABS

12496 Plastec DN 80 x 50 Elbow ASA

12517 Plastec DN 40 180 Degree Elbow ABS

12518 Plastec DN 50 180 Degree Elbow ABS

12660 Plastec DN 80 x DN 65 Grate and Flange Adaptor ABS

12661 Plastec DN 100 x DN 90 Grate and Flange Adaptor ABS

12662 Plastec DN 80 x DN 46 Grate and Flange Adaptor ABS

12664 Plastec DN 100 x DN 46 Grate and Flange Adaptor ABS

12665 Plastec DN 100 x DN 65 Grate and Flange Adaptor ABS

12925 Plastec DN 40 Adaptor Joiner ABS

12926 Plastec DN 50 Adaptor Joiner ABS

12930 Plastec DN 100 Repair Coupling Pipe ABS

12937 Plastec DN 65 Adaptor ABS

12938 Plastec DN 80 Adaptor ABS

12939 Plastec DN 100 Adaptor ABS

Page 5 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

12940 Plastec DN 50 Pipe Joiner Adaptor ABS

12941 Plastec Pipe Joiner Adaptor 80 ABS

12942 Plastec Pipe Joiner Adaptor 100 ABS

12950 Plastec DN 40 MF Pipe Elbow ABS

12951 Plastec DN 50 MF Pipe Elbow ABS

12960 Plastec DN 40 MF Elbow ABS

12961 Plastec DN 50 MF Elbow ABS

12970 Plastec DN 50 Vent Cowl and Cap ASA Stainless steel

12971 Plastec DN 100 Vent Cowl and Cap ASA Stainless steel

13300 Plastec DN 80 x DN 50 Floor Flange ABS

13646 Plastec DN 100 Pan Connector Offset 40 Solvent Weld

Lowset ABS TPE PP

14500 Plastec DN 40 88 Degree Elbow ABS

14503 Plastec DN 50 88 Degree Elbow ABS

14551 Plastec DN 100 Slip Coupling with end stop ASA

14564 Plastec DN 100 x DN 40 Reducer Adaptor ASA

14749 Plastec DN 100 Pan Connector Offset 20 Flexi-Fin High

set PP TPE

14750 Plastec DN 100 Pan Connector Offset 40 High Set Flexi

Fin TPE PP

14751 Plastec DN 100 Pan Connector Offset 60 Flexi-Fin

Highset TPE PP

14761 Plastec DN 100 Pan Bend Connector Swan Neck TPE PP

Page 6 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

14767 Plastec DN 100 Pan Connector Offset 20 High Set Solvent

Weld TPE ABS PP

14768 Plastec DN 100 Pan Connector Offset 40 Solvent Weld

Highset ABS TPE PP

14769 Plastec DN 100 Pan Connector Offset 40 Solvent Weld

Highset ABS TPE PP

14787 Plastec DN 100 Three Piece Pan Connector Flexi Fin TPE ABS PP

14831 Plastec DN 100 x DN 80 Pan Connector Solvent Weld

Lowset ABS TPE PP

14834 Plastec DN 40 Double Bowl Connector TPE PP

14835 Plastec Double bowl connector 50 TPE PP

14836 Plastec DN 50 Low Level Flush Pipe PP

14837 Plastec DN 50 Mid Level Flush Pipe PP

14838 Plastec DN 40 Combination Adjustable Trap PP NCR70

14840 Plastec DN 50 P Trap PP NCR70

14841 Plastec DN 50 Waste Disposal Connector TPE PP

14842 Plastec DN 50 High Level Flush Pipe PP

14849 Plastec DN40 Combination P & S Trap with Dishwasher

Inlet PP

14876 Plastec DN 100 Repair Coupling Earthenware Pipe to PVC

Pipe ABS

14894 Plastec DN 100 x DN 50 Reducer Adaptor ASA

14913 Plastec DN 100 Adaptor Coupling Earthenware Pipe

(Spigot) to PVC Pipe (Spigot) ABS

14920 Plastec DN 50 Internal to External Nut PP NCR70

Page 7 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

14920 Plastec DN50 Adaptor ABS

14946 Plastec DN 100 Adaptor Coupling Earthenware Pipe (ID

Spigot) to PVC Pipe (Socket) ABS

14954 Plastec DN 40 P Trap Short PP

14972 Plastec DN50 Frog Flap ABS

14976 Plastec DN40 Adaptor-Internal Thread ABS

14977 Plastec DN50 Adaptor - Internal Thread ABS

14978 Plastec DN40 Adaptor-Internal Thread ABS

14979 Plastec DN50 Adaptor - Internal Thread ABS

14980 Plastec DN 100 End Cap ABS

14982 Plastec DN225 End Cap ABS

14984 Plastec DN40 Adaptor-Internal Thread ABS

14985 Plastec DN50 Adaptor-External Thread ABS

14987 Plastec DN50 Adaptor-External Thread ABS

14989 Plastec DN 40 Cover Plate End Cap ABS

14990 Plastec DN 50 Cover Plate End Cap ABS

14994 Plastec DN 50 Vent Cowl Mossie Proof ASA

14999 Plastec DN 80 Cover Plate End Cap ABS

14991 Plastec DN 100 Vent Cowl ABS

14992 Plastec DN 50 Vent Cowl ASA

14997 Plastec DN 100 End Cap (Insert) ABS

14998 Plastec DN 65 End Cap Cover Plate ABS

15001 Plastec DN 100 Threaded Cap ASA NR70

Page 8 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

15005 Plastec DN40 Elbow -Threaded ABS

15006 Plastec DN50 Elbow-Threaded ABS

15007 Plastec DN 40 Elbow-External Thread ABS

15008 Plastec DN40 Elbow -Threaded ABS

15009 Plastec DN50 Elbow-Threaded ABS

15010 Plastec DN 40 Elbow-External Thread ABS

15011 Plastec DN50 Elbow - Internal Thread ABS

15012 Plastec DN150 Bolted Trap Screw ASA TPE

15012 Plastec DN150 Bolted Trap Screw Assembly ASA

15013 Plastec DN 150 Bolted Trap Screw Assembly Brass Lid ASA Brass

15075 Plastec DN 50 Combination Adjustable Trap PP NCR70

15092 Plastec DN 50 P Trap with Twin Dishwasher Waste

Connectors PP

15097 Plastec DN50 Adjustable Cap and Lining PP

15098 Plastec DN40 Adjustable Cap and Lining PP

15099 Plastec DN40 Tube S Trap PP

15104 Plastec DN50 Double bowl connector x 350mm PP

15117 Plastec DN100 Repair Coupling for PVC Pipelines ASA

15168 Plastec DN40 Bath Waste Trap Loose Nut Connection

Ends ASA

15171 Plastec

DN40 Bath Waste Fitting with Pop Up Waste

Outlet and Integral Trap Loose Nut Connection

End

ASA

Page 9 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

15197 Plastec

DN40 Bath Waste Fitting with Pop Up Waste

Outlet and Integral Trap Loose Nut Connection

End Chrome Plated

ASA

15251 Plastec DN50xDN60 Adaptor ABS

15252 Plastec DN50xDN60 Dishwasher Overflow Adaptor ABS

15254 Plastec DN100 Frog Flap ASA

15280 Plastec Carbon Vent ABS

15290 Plastec DN 100 Bolted Trap Screw with Brass Lid Push In

Connection ABS

15292 Plastec Bolted Cap Flexi Fin 100 ASA

15302 Plastec DN 100 Slip joint coupling ASA

15541 Plastec DN50 Waste Disposal Connection Assembly x

350mm PP

15571 Plastec DN 100 MF Elbow ABS

15572 Plastec DN 40 Bath Waste Fitting with Waste Outlet Plug

and Integral Trap Loose Nut Connection End ASA

15600 Plastec DN 40 P Trap with Dishwasher Waste Connector PP

15605 Plastec DN 40 End Cap ABS

15606 Plastec DN 50 End Cap ABS

15607 Plastec DN65 End Cap ABS

15608 Plastec DN 80 End Cap ABS

15625 Plastec DWV Adaptor 90x80 ABS

15628 Plastec DN65 MF Elbow 88° ABS

15642 Plastec DN 100 Offset Pan Connector TPE ABS Polypropylene

Page 10 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

15781 Plastec DN300 End Cap ABS

15862 Plastec DN100x50 Reducer HDPE PP/NR

15866 Plastec DN 40 Telescopic P/S Trap with Dishwasher

Waste Connector PP

15873 Plastec DN 100 Slip Coupling ASA

15878 Plastec DN40 Combination Trap Short Leg PP

15879 Plastec 50 Short Leg Combination Trap PP

15916 Plastec

DN40 Bath Waste Fitting with Waste Outlet Plug

and Integral Trap Loose Nut Connection End

Chrome

ASA

15917 Plastec

DN40 Bath Waste Fitting with Pop Up Waste

Outlet and Integral Trap Loose Nut Connection

End Chrome

ASA

15920 Plastec DN40 Bath Waste Trap Chrome Plated Loose

Nut Connection Ends ASA

15932 Plastec DN 100 x 40 Adaptor PVC to PE ASA

15956 Plastec DN100 Slab Adaptor ABS

15962 Plastec DN100 End Cap (Insert) ABS

15963 Plastec DN40 In Pipe Plug ABS

15964 Plastec DN50 In Pipe Plug ABS

16351 Plastec DN 65 x DN 40 Reducer Adaptor ASA

16352 Plastec DN 65 x DN 50 Reducer Adaptor ASA

16554 Plastec DN50x40 Trap Adaptor ABS

16559 Plastec DN100x50x88 degrees Clip On Boss Assembly ASA

16600 Plastec DN 50 x 40 Threaded Adaptor ASA

Page 11 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

16630 Plastec DN50 Telescopic P/S Trap Assembly with

Dishwasher Inlet PP

16661 Plastec DN 100 x DN 50 x 4 Vacuum Head Waste Fitting

Offset 45° ASA

16672 Plastec DN 100 x DN 50 x 4 Vacuum Head Waste Fitting

Straight ASA

16699 Plastec DN 40 Straight Fitting x 450mm Chrome Plated ABS

16850 DECINA DN 80 x 50 Shower Waste Plastic Body Square

Grate ABS

16861 Plastec DN 100 Three Piece Pan Connector Flexi Fin

30mm Offset TPE ABS PP

17073 Plastec DN 100 Puddle Flange with included waste brass

grate and trap Brass ABS PP

17161 Plastec DN50 Combination S & P Trap Assembly PP

17162 Plastec DN40 Combination S & P Trap Assembly PP

17228 Plastec DN 50 Trap assembly for puddle flange PP

17256 Plastec DN 100 Drainage Flange with included waste

brass grate and trap

Brass, ABS,

Polypropylene

17386 Plastec DN 40 x 100mm long Waste Connector Assembly PP

17410 Plastec DN 80 x 50 Shower Waste with Integral 70mm

Water Seal ABS

17412 Plastec DN 80 x 50 Shower Waste (Chrome) with Integral

70mm Water Seal ABS

17423 Plastec DN 40 Bottle Trap with Integral Plug and Waste

Loose Nut Connection End ABS

17424 Plastec DN 40 Bottle Trap with Integral Pop Up Waste

Loose Nut Connection End ABS

Page 12 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

17425 Plastec DN 40 Bottle Trap Loose Nut Connection Ends ABS

17432 Plastec DN 40 Combination P/S Trap Chrome with

Dishwasher Inlet PP

17454 Plastec DN 40 Bottle Trap with Integral Plug and Waste

Loose Nut Connection End ABS

17455 Plastec DN 40 Bottle Trap Loose Nut Connection Ends

Chrome Plated ABS

17459 Plastec DN 40 Bottle Trap with Integral Plug and Waste

Loose Nut Connection End Chrome Plated ABS

17472 Plastec DN 50 P Trap with Twin Dishwasher Waste

Connectors Chrome Plated PP

15097 Plastec DN 50 Adjustable Cap and Lining PP

17471 Plastec DN 40 Combination P/S Trap Chrome with

Dishwasher Inlet PP

17506 Plastec DN 80 x 50 Shower Waste KADO Decina ASA

17635 Plastec DN50 Push Fit Elbow 90 degrees Chrome ABS

17728 Plastec DN100 Flexible Straight Coupling Flexi-Tec ASA/TPE

17732 Plastec DN32x200mm Adjustable Cap and Lining PP

17734 Plastec DN40x100mm Trap Extension with Overflow (2) PP

18095 Plastec DN65 Submerged Gully ABS/ASA

18105 Plastec DN 150 Bolted Trap Screw Assembly Brass Lid

Chrome Plated ABS/ASA

18162 Plastec DN 100 DWV Flexifin Clear-Out PE/Brass

18266 Plastec DN 80 x 50 Shower Waste Plastic Body Halo

Grate ABS

Page 13 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

18267 DECINA DN 80 x 50 Shower Waste Plastic Body Chrome

Plated Halo Grate ABS

18273 Plastec DN 80 x 50 Shower Waste SHOWERLINE ASA

18309 Plastec DN50 Double bowl connector 50 PE

18312 Plastec DN40 Combination S & P Trap Assembly PE

18316 Plastec DN50 Combination Adjustable Trap PE

18660 Plastec DN 100 DWV Flexifin Clear-Out PE

18866 Plastec DN 40 Trap with Dishwasher Connection and

Vent Loose Nut Ends Polypropylene NBR70

18867 Plastec DN 50 Trap with Dishwasher Connection and

Vent Loose Nut Ends Polypropylene NBR70

19035 Plastec DN 150 Vent Cowl with Cover Cap Solvent

Cement Socket Connection End ASA

19065 Plastec Floor Waste Gully DN 40 x 65 DN 100 Riser ASA

19066 Plastec Floor Waste Gully DN 40 x 50 DN 100 Riser ASA

Page 14 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

The WaterMark User Plastec Australia Pty Ltd

2-4 Enterprise St Caloundra Queensland 4551 AUSTRALIA

Website: www.plastec.com.au

Certificate Number 239

Certification Standards: WMTS 040:2016 Waste pipe connection outlets and gratings separate or

integral

Product Listing

Model

Identification Brand Name Product Description Material Designation

CU000 Plastec DN 40 Pop-Up Waste Brass

11710 Plastec Bath Flexible Hose Kit with Included Waste PP ABS

11713 Plastec Bath Flexible Hose Kit with Included Waste

Chrome Plated PP ABS

11730 Plastec Shower Flexible Hose Kit Brass ABS TPE Stainless

NR70

11740 Plastec DN 40 Bath Connection Kit ABS TPE Brass NR70

11760 Plastec DN 40 Plug and Waste PP ABS

11762 Plastec DN 40 Plug and Waste PPABS Stainless Steel

11773 Plastec DN 40 Plug and Waste Long ABS

11786 Plastec DN 50 Plug and Waste PP ABS

11788 Plastec DN 50 Plug and Waste Stainless Steel PP ABS Stainless Steel

11794 Plastec DN 50 Stainless Steel Sink Waste ABS Stainless steel TPE

11796 Plastec DN 40 Plug and Waste Elbow Kit ABS

11798 Plastec DN 40 Plug and Waste Elbow Kit ABS

12001 Plastec DN 80 Vinyl Floor Flange Flexible TPE Nylon Brass

Stainless Steel

12002 Plastec DN 100 Vinyl Floor Flange Flexible TPE Nylon Brass

Stainless Steel

Page 15 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

12007 Plastec DN 80 Solvent Weld Vinyl Floor Waste Brass Stainless Steel

ABS

12006 Plastec DN 80 Solvent Weld Vinyl Floor Waste Brass Stainless Steel

ABS

12008 Plastec DN 100 Solvent Weld Vinyl Floor Waste Brass Stainless Steel

ABS

12014 Plastec DN 100 Vinyl Floor Waste and Solid Grate Brass

12100 Plastec DN 80 x 50 Shower Waste and Flange ABS NR70

12103 Plastec DN 80 Shower Waste and Flange ABS NR70

12106 Plastec DN 100 Shower Waste and Flange ABS NR70

12138 Plastec DN 100 x 80 Shower Waste and Flange ABS NR70

12230 Plastec DN 80 x DN 50 Adjustable Waste and Flange ABS

12231 Plastec DN 80 x DN 80 Adjustable Waste and Flange ABS

12232 Plastec DN 100 Adjustable Waste and Flange ABS

12241 Plastec DN 100 Waste and Puddle Flange ABS

12244 Plastec DN 80 x DN 50 Waste and Flange ABS

12245 Plastec DN 80 x DN 80 Waste and Flange ABS

12247 Plastec DN 100 x DN 80 Waste and Flange ABS

12248 Plastec DN 100 Waste and Flange ABS

12249 Plastec DN 100 x DN 50 Waste and Flange ABS

12370 Plastec DN 80 Short Waste and Grate ABS

12373 Plastec DN 100 Short Waste and Grate ABS

12400 Plastec DN 80 Short Floor Waste Stainless PP Stainless steel

12401 Plastec DN 100 Short Floor Waste Stainless PP Stainless steel

Page 16 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

12430 Plastec DN 80 Brass Grate Slotted Brass

12432 Plastec DN 100 Brass Grate Slotted Brass

12450 Plastec DN 80 Floral Stubby Shower Waste and Grate Brass

12452 Plastec DN 100 Floral Stubby Shower Waste and Grate Brass

12460 Plastec DN 80 Brass Grate Slotted Square Brass

12462 Plastec DN 100 Brass Grate Square Brass

12490 Plastec DN 100 Tile Grate ABS

12491 Plastec DN100 Stainless Steel Bodied Tile Waste Stainless Steel

12521 Plastec DN 80 Puddle Flange ABS

12522 Plastec DN 100 Puddle Flange ABS

12523 Plastec DN 80 x DN 50 Puddle Flange ABS

12540 Plastec DN 100 Waste and Grate Flexible ABS TPE

12564 Plastec DN 80 x 50 Waste and Grate Stainless PP ABS TPE Stainless

steel

12570 Plastec DN 80 Waste and Grate Stainless PP ABS TPE Stainless

steel

12670 Plastec DN 50 Floor Waste ABS

12674 Plastec DN 80 Floor Waste ABS

12677 Plastec DN 100 Floor Waste ABS

12683 Plastec DN 50 Waste and Grate Stainless PP Stainless Steel

12700 Plastec DN 80 Adjustable Floor Waste PP

12702 Plastec DN 100 Adjustable Floor Waste PP

12712 Plastec DN 80 Flexible Floor Waste and Grate PP Stainless Steel

Page 17 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

12714 Plastec DN 100 Flexible Floor Waste and Grate PP Stainless Steel

12718 Plastec DN 80 Adjustable Floor Waste PP

12720 Plastec DN 100 Adjustable Floor Waste PP

12724 Plastec DN 80 Flexible Floor Waste Stainless PP Stainless Steel

12725 Plastec DN 100 Flexible Floor Waste Stainless PP Stainless Steel

12860 Plastec DN 80 x 40 Shower Waste and Grate Tapered ABS

12860 Plastec DN 80 x 40 Brass Grate Assembly Round Slotted

Holes ABS Brass

12866 Plastec DN 80 x 65 Brass Grate Assembly Round Slotted

Holes ABS Brass

12872 Plastec DN 100 x 80 Brass Grate Assembly Round Slotted

Holes ABS Brass

12893 Plastec DN 80 x 40 Brass Grate Assembly Square Slotted

Holes ABS Brass

12899 Plastec DN 80 x 65 Brass Grate Assembly Square Slotted

Holes ABS Brass

12905 Plastec DN 100 x 80 Brass Grate Assembly Square

Slotted Holes ABS Brass

13304 Plastec DN 80 x 50 Floor Flange Kit ABS

13306 Plastec DN 80 Floor Flange Kit ABS

13308 Plastec DN 100 x 50 Floor Flange Kit ABS

13310 Plastec DN 100 Floor Flange Kit ABS

13645 Plastec DN 80 x 50 Vinyl Floor Flange Flexible TPE Nylon Brass

Stainless Steel

13648 Plastec

DN80 x DN80 Adjustable Waste and Flange with Brass

Grate Round ABS/Brass

Page 18 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

13649 Plastec

DN100 x DN100 Adjustable Waste and Flange with

Brass Grate Round ABS/Brass

13655 Plastec DN 80 x 40 Floral Taper Shower waste and Grate Brass

13656 Plastec DN 80 x 65 Floral Taper Shower Waste and Grate Brass

13657 Plastec DN 100 x 80 Floral Taper Shower Waste and

Grate Brass

13661 Plastec

DN80 x DN80 Adjustable Waste and Flange with Brass

Grate Square ABS/Brass

13662 Plastec

DN100 x DN100 Adjustable Waste and Flange with

Brass Grate Square ABS/Brass

13693 Plastec DN 100 x 50 Balcony Floor flange ABS

13748 Plastec DN 65 Short Tail Waste and Grate ABS

13749 Plastec DN 90 Short Tail Waste and Grate ABS

13754 Plastec DN 80 x 50 Stainless Steel Sink Waste ABS Stainless steel TPE

14239 Plastec DN 100 x 90 Shower Waste and Grate ABS

14710 Plastec DN100 offset recess waste adaptor Roto Pan

100/50 ABS

14808 Plastec DN 100 Solvent Weld Vinyl Floor Waste 200mm

Flange

Brass Stainless Steel

ABS

14935 Plastec DN 32 Pop-Up Waste Brass TPE ABS Stainless

Steel

14936 Plastec DN 40 Pop-Up Waste Brass TPE ABS Stainless

Steel

14940 Plastec DN 32 Plug and Waste Brass TPE ABS Stainless

Steel

14941 Plastec DN 40 Plug and Waste Brass TPE ABS Stainless

Steel

Page 19 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

14947 Plastec DN 40 Pop-Up Waste Brass

14957 Plastec DN 100 Brass Vinyl Floor Waste TPE Nylon Brass

Stainless Steel Brass

14958 Plastec DN100X80 Vinyl Floor Waste Assembly Brass

Body Brass

15017 Plastec DN100 Raised Offset Recess Waste Adaptor Roto

Pan ABS

15021 Plastec DN100 Brass Vinyl Floor Waste with Solid

Grate/Cover

TPE Nylon Brass

Stainless Steel

15055 Plastec DN 32 Plug and Waste PP ABS

15077 Plastec DN 40 Adjustable Bath Waste ABS TPE Brass Stainless

Steel PBT

15078 Plastec DN 80 x 50 Adjustable Shower Waste ABS TPE Brass Stainless

Steel PBT

15097 Plastec DN100 Stainless Steel Bodied Tile Waste Stainless Steel

15110 Plastec DN 40 Single Dinger Waste TPE Stainless ABS Brass

NR70

15113 Plastec DN 40 Triple Dinger Waste TPE Stainless Steel ABS

Brass NR70

15114 Plastec DN 80 Triple Dinger Waste TPE S Stainless Steel

ABS Brass NR70

15115 Plastec DN 80 Single Dinger Waste TPE Stainless Steel ABS

Brass NR70

15135 Plastec DN 80 Waste Trap Large TPE Stainless ABS Brass

15139 Plastec DN40 Flexible Hose x 1m PVC

15141 Plastec DN 40 Spa Elbow Overflow to Spa Elbow Pop -Up

Outlet

Brass ABS Stainless

Steel TPE

Page 20 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

15200 Plastec DN40 Flexible Hose x 300mm PVC

15201 Plastec

DN100 x DN100 HDPE Adjustable Waste and Flange

with Brass Grate Round HDPE/Brass

15202 Plastec

DN100 x DN100 HDPE Adjustable Waste and Flange

with Brass Grate Square Chrome HDPE/Brass

15228 Plastec DN90xDN50 Sink Waste & Strainer ABS

15288 Plastec DN100 Waste and Grate Vinyl Floors Brass

15535 Plastec Waste Kit TPE PP ABS Stainless

15559 Plastec DN 50 Waste Trap Large TPE Stainless ABS Brass

15574 Plastec DN 40 Waste Trap Small TPE PP ABS

15585 Plastec DN 40 Waste Trap with Pop-Up Plug Brass NR70 ABS TPE

15597 Plastec DN 50 Triple Dinger Waste TPE Stainless ABS Brass

NR70

15598 Plastec DN 50 Single Dinger Waste TPE Stainless ABS Brass

NR70

15757 Plastec DN100x50 Roto Pan Bath Reducer ABS

15901 Plastec DN100 x 40 Waste and Grate Square Copper

Alloy (Brass) Brass

16379 Plastec DN100 Raised Offset Recess Waste Adaptor Roto

Pan ABS

16740 Plastec DN 50 Shower Waste with integral trap ABS

17071 Plastec DN 100 Puddle Flange with included waste brass

grate and trap Brass ABS PP

17073 Plastec DN 100 Puddle Flange with included waste brass

grate and trap Brass ABS PP

Page 21 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

17248 Plastec DN 100 Drainage Flange with included waste

brass grate and trap

Brass, ABS,

Polypropylene

17256 Plastec DN 100 Drainage Flange with included waste

brass grate and trap

Brass, ABS,

Polypropylene

17269 Plastec DN 100 Puddle Flange with Included Waste Brass

Grate (Square) and Trap

Brass ABS

Polypropylene

17385 Plastec DN100 Lid for Roto Pan Waste Adaptor ABS

17410 Plastec DN 80 x 50 Shower Waste with Integral 75mm

Water Seal ABS

17412 Plastec DN 80 x 50 Shower Waste (Chrome) with Integral

75mm Water Seal ABS

17456 Plastec DN100 Roto Pan Solid Lid ABS

17522 Plastec

DN100 Puddle Flange with Included Waste

Stainless Steel Grate (Smart Tile) Swivel Twist

Top Spigot Solvent Weld End Connection

PVC-U/Stainless Steel

17524 Plastec

DN100 Puddle Flange with Included Waste Brass

Grate (Round) Swivel Twist Top Spigot Solvent

Weld End Connection

PVC-U Brass

17525 Plastec

DN100 Puddle Flange with Included Waste Brass

Grate (Square) Swivel Twist Top Spigot Solvent

Weld End Connection

PVC-U Brass

17540 Plastec

DN80 Puddle Flange with Included Waste Brass

Grate (Round) Swivel Twist Top Spigot Solvent

Weld End Connection

PVC-U Brass

17541 Plastec

DN80 Puddle Flange with Included Waste Brass

Grate (Square) Swivel Twist Top Spigot Solvent

Weld End Connection

PVC-U Brass

17542 Plastec

DN100x80 Puddle Flange with Included Waste

Stainless Steel Grate (Smart Tile) Swivel Twist

Top Spigot Solvent Weld End Connection

PVC-U/Stainless Steel

Page 22 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification Brand Name Product Description Material Designation

17543 Plastec

DN80 Puddle Flange with Included Waste Brass

Grate (Round) Swivel Twist Top Push In O Ring

Seal Connection End

PVC-U ABS Brass

17544 Plastec

DN80 Puddle Flange with Included Waste Brass

Grate (Square) Swivel Twist Top Push In O Ring

Seal Connection End

PVC-U ABS Brass

17545 Plastec

DN100x80 Puddle Flange with Included Waste

Stainless Steel Grate (Smart Tile) Swivel Twist

Top Push In O Ring Seal Connection End

PVC-U/Stainless Steel

17546 Plastec

DN100 Puddle Flange with Included Waste

Stainless Steel Grate (Smart Tile) Swivel Twist

Top Push In O Ring Seal Connection End

PVC-U/Stainless Steel

17547 Plastec

DN100 Puddle Flange with Included Waste Brass

Grate (Round) Swivel Twist Top Push In O Ring

Seal Connection End

PVC-U ABS Brass

17548 Plastec

DN100 Puddle Flange with Included Waste Brass

Grate (Square) Swivel Twist Top Push In O Ring

Seal Connection End

PVC-U ABS Brass

17999 Plastec DN40 Double Bowl Connector NZ PP

18681 Plastec DN100 Waste and Grate Vinyl Floors for use with

Submerged Gully 18095 ABS/Brass

18982 Plastec DN100 Brass Grate Assembly Round Slotted

Holes Brass

18995 Plastec DN100 Brass Grate Assembly Square Slotted

Holes Brass

112899 Plastec DN80 x DN40 Brass bodied square waste and

included grate Brass

Page 23 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

The WaterMark User Plastec Australia Pty Ltd

2-4 Enterprise St Caloundra Queensland 4551 AUSTRALIA

Website: www.plastec.com.au

Certificate Number 239

Certification Standards: AS/NZS 1260:2009 PVC pipes and fittings for drain waste and vent

application

Product Listing

Model

Identification

Brand

Name Product Description Material Designation

11646 Plastec DN 100 Overflow Relief Waste and Grate DT

Surround PVC-U

11647 Plastec DN 100 Overflow Relief Waste and Grate DT

Surround with Stainless Steel Shroud PVC-U

11650 Plastec DN 100 Overflow Relief Waste and Grate DT

Surround PVC-U

11651 Plastec DN 100 Overflow Relief Waste and Grate DT

Surround with Stainless Steel Shroud PVC-U

11656 Plastec DN 100 Overflow Relief Waste and Grate DT

Surround with Lid PVC-U

11657 Plastec DN 100 Overflow Relief Waste and Grate DT

Surround with Lid and Stainless Steel Surround PVC-U

11662 Plastec DN140x100 Finishing Collar with Flat Grate

Square Holes PVC-U

11671 Plastec DN140 Flat Grate Square Holes PVC-U

11696 Plastec DN100 Bolted Cap Screw Brass Lid Chrome

Plated Solvent Cement Spigot PVC-U

11697 Plastec DN100 Bolted Cap Screw Brass Lid Chrome

Plated Solvent Cement Spigot PVC-U

11706 Plastec DN 100 Bolted trap Screw PVC-U

11707 Plastec DN 100 Bolted trap Screw with Stainless Steel

Surround PVC-U

Page 24 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

12050 Plastec DN40 PVC-U Puddle Flange PVC-U

12051 Plastec DN50 PVC-U Puddle Flange PVC-U

12537 Plastec DN 100 Adaptor PVC-U

12660 Plastec DN 80 Flange Adaptor PVC-U

12950 Plastec DN 40 MF Pipe Elbow PVC-U

12951 Plastec DN 50 MF Pipe Elbow PVC-U

12960 Plastec DN 40 MF Elbow PVC-U

12961 Plastec DN 50 MF Elbow PVC-U

14292 Plastec DN 50 Puddle Flange Round O Ring Seal PVC-U

14293 Plastec DN 100 Puddle Flange Square O Ring Seal PVC-U

14294 Plastec DN 100 Puddle Flange Round Maxi Swivel PVC-U

14295 Plastec DN 80 Puddle Flange Round PVC-U

14301 Plastec DN 80 Puddle Flange Threaded Plain Spigot PVC-U

14304 Plastec DN 100 Puddle Flange Threaded Plain Spigot PVC-U

14305 Plastec DN 50 Puddle Flange Threaded Plain Spigot PVC-U

14306 Plastec DN 100 Puddle Flange Round Threaded O Ring

Seal PVC-U

14307 Plastec DN 50 Puddle Flange Round Threaded O Ring

Seal PVC-U

14308 Plastec DN 80 Puddle Flange Round Threaded O Ring

Seal PVC-U

14350 Plastec DN 100 Flange Threaded Adaptor PVC-U

14353 Plastec DN 50 Flange Threaded Adaptor PVC-U

14354 Plastec DN 80 Flange Threaded Adaptor PVC-U

Page 25 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

14464 Plastec DN 100 Puddle Flange Round O Ring Seal PVC-U

14466 Plastec DN 50 Puddle Flange Round Maxi Swivel PVC-U

14571 Plastec DN100 Flange Adaptor PVC-U

14572 Plastec DN100 x 50 Flange Adaptor PVC-U

14573 Plastec DN 80 x 50 Flange Adaptor PVC-U

14705 Plastec DN65 MF Pipe Elbow PVC-U

14776 Plastec DN 80 Adaptor PVC-U

14848 Plastec DN 80 Puddle Flange Round O Ring Seal PVC-U

14926 Plastec DN100 Pan Collar Short Spigot PVC-U

14927 Plastec DN100 Offset Pan Collar Short Spigot PVC-U

14972 Plastec DN 50 Frog Flap PVC-U

14981 Plastec DN 150 End Cap PVC-U

14986 Plastec DN40 Adaptor-External Thread PVC-U

15001 Plastec DN 100 Threaded Cap PVC-U

15002 Plastec DN 150 Threaded Cap PVC-U

15117 Plastec DN 100 Repair Coupling for PVC Pipelines PVC-U

15128 Plastec DN 100 Slip Coupling PVC PVC-U

15129 Plastec DN100 Expansion Coupling Socket End PVC-U

15293 Plastec DN100 Bolted Cap Screw Brass Lid Flexi Fin

Spigot PVC-U

15294 Plastec DN100 Bolted Cap Screw Brass Lid Chrome

Plated Flexi Fin Spigot PVC-U

15295 Plastec DN100 Bolted Cap Screw Plastic Lid Flexi Fin

Spigot PVC-U

Page 26 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

15550 Plastec DN50 PVC-U Weathering Apron PVC-U

15882 Plastec DN80 MF Pipe Elbow PVC-U

16257 Plastec DN150 Bolted Cap Screw Brass Lid Chrome

Plated Solvent Cement Spigot PVC-U

16258 Plastec DN150 Bolted Cap Screw Brass Lid Chrome

Plated Solvent Cement Spigot PVC-U

16708 Plastec DN 100 Adaptor Threaded PVC-U

16774 Plastec DN 100 Tee Junction 90° PVC PVC-U

16775 Plastec DN 100 Tee Junction 45° PVC PVC-U

16787 Plastec DN50x40 PVC-U Reducing Bush PVC-U

16783 Plastec DN100x65 Socket Reducer PVC-U

16787 Plastec DN50x40 Reducer Adaptor Spigot x Socket PVC-U

16789 Plastec DN65x40 PVC-U Reducing Bush PVC-U

16788 Plastec DN65 x 50 Reducer Adaptor PVC-U

16789 Plastec DN65x40 Socket Reducer PVC-U

16837 Plastec DN100 Slip Connector Socket x Seal PVC-U

17099 Plastec DN100 x 88 degrees Disconnect Trap Assembly PVC-U

17100 Plastec DN 100 Sweep Bend PVC-U

17101 Plastec DN 100 Bend x 45 degrees Socket x Spigot PVC-U

17102 Plastec DN100 x 88 degrees Disconnector Gully PVC-U

17103 Plastec DN 100 x 180 degrees Disconnect Trap Bend PVC-U

17104 Plastec DN 100 x 88 degrees Disconnect Trap Elbow PVC-U

17107 Plastec DN100 x 88 degrees Disconnect Trap Assembly PVC-U

Page 27 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

17108 Plastec DN100 x 180 degree Elbow Socket x Socket PVC-U

17116 Plastec DN 80 x 50 x 40 4 Way Junction PVC-U

17116 Plastec DN80 PVC-U 4 Way Riser PVC-U

17117 Plastec DN 80 x DN 50 x DN 40 4 Way Junction Extended PVC-U

17118 Plastec DN 100 x 50 x 40 4 Way Junction PVC-U

17119 Plastec DN 100 x 50 x 40 4Way Junction PVC-U

17124 Plastec DN 100 x 92 degrees Sweep Bend PVC-U

17127 Plastec DN 80 x 65 Bend 180 degrees for Floor Waste

Gully PVC-U

17128 Plastec DN 100 x 65 Bend 180 degrees for Floor Waste

Gully PVC-U

17129 Plastec DN 65 Bend x 88 degrees Socket x Spigot PVC-U

17130 Plastec DN 65 x 50 Bend x 88 degrees Socket x Spigot PVC-U

17131 Plastec DN80x50 PVC-U Floor Waste Gully PVC-U

17132 Plastec DN80x65 PVC-U Floor Waste Gully PVC-U

17133 Plastec DN 100x65 Floor Waste Gully Assembly PVC-U

17134 Plastec DN 100x65 Floor Waste Gully Assembly PVC-U

17154 Plastec DN 100 x 88 degrees x DN 150 Clearout Socket x

Spigot PVC-U

17157 Plastec

DN 100 x 88 degrees x DN 150 Clearout Socket x

Spigot Included with Model 15002 (Threaded

Cap) and 17108 (Elbow)

PVC-U

17175 Plastec DN 40 x 90˚ Bend Push Fit x Push Fit PVC-U

17176 Plastec DN50 Push Fit Elbow 90 degrees PVC-U

Page 28 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

17177 Plastec DN 40 x 45˚ Bend Push Fit x Push Fit PVC-U

17178 Plastec DN50 Push Fit Elbow 45 degrees PVC-U

17179 Plastec DN 40 x 15˚ Bend Push Fit x Push Fit PVC-U

17180 Plastec DN50 Push Fit Elbow 15 degrees PVC-U

17181 Plastec DN 40 Connector Push Fit x Push Fit PVC-U

17182 Plastec DN50 Push Connector PVC-U

17183 Plastec DN 40 x 90˚ Bend Push Fit x Spigot PVC-U

17184 Plastec DN50 Push Fit/Pipe Elbow x 90 Degrees PVC-U

17185 Plastec DN 40 x 45˚ Bend Push Fit x Spigot PVC-U

17186 Plastec DN50 Push Fit/Pipe Elbow x 45 Degrees PVC-U

17187 Plastec DN 40 x 15˚ Bend Push Fit x Spigot PVC-U

17188 Plastec DN50 Push Fit/Pipe Elbow x 15 Degrees PVC-U

17189 Plastec DN 40 Connector Push Fit x Spigot PVC-U

17190 Plastec DN50 Push Fit/Pipe Straight Connector PVC-U

17191 Plastec DN40 Push Fit Tee 90 degrees PVC-U

17192 Plastec DN50 Push Fit Tee 90 degrees PVC-U

17193 Plastec DN 40 Y Connector x 45 degrees Push Fit x Push

Fit PVC-U

17194 Plastec DN50 Push Fit Y Junction x 45 degrees PVC-U

17195 Plastec DN50 x 40 Push Fit/Pipe Straight Connector PVC-U

17202 Plastec DN 40 Connector Push Fit x Socket PVC-U

17203 Plastec DN50 Push Fit/Socket Straight Connector PVC-U

17204 Plastec DN 40 Connector Push Fit x Tapered Spigot PVC-U

Page 29 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

17205 Plastec DN50 Push Fit/Tapered Spigot Straight

Connector PVC-U

17225 Plastec DN 150 Repair Coupling Clamp PVC-U

17230 Plastec DN 100 x 88˚ R225 Swept Bend Socket x Socket PVC-U

17232 Plastec DN 80 x 40 (2) x 50 (2) 4 Way Riser PVC-U

17233 Plastec DN100 PVC-U 5 Way Riser PVC-U

17233 Plastec DN 100 x 40 (3) x 50 (1) 4 Way Riser PVC-U

17246 Plastec DN 150 Threaded Socket PVC-U

17260 Plastec DN100x90 Stormwater Adaptor PVC-U

17273 Plastec DN 100x50 Extended Elbow PVC-U

17278 Plastec DN225 x 88 degrees Swept Bend Socket x Socket PVC-U

17281 Plastec DN225 x 45 degrees Bend Socket x Socket PVC-U

17294 Plastec DN225 x 45 degrees Junction Socket x Socket x

Socket PVC-U

17300 Plastec DN225 x 88 degrees Square Junction Socket x

Socket x Socket PVC-U

17307 Plastec DN225 x 150 Level Invert Taper Socket x Spigot PVC-U

17395 Plastec DN32 x 90˚ Elbow Push Fit PVC-U

17396 Plastec DN32 x 45˚ Elbow Push Fit PVC-U

17397 Plastec DN32 x 15˚ Elbow Push Fit PVC-U

17398 Plastec DN32 Connector Push Fit PVC-U

17399 Plastec DN32 x 90˚ Elbow Push Fit x Spigot PVC-U

17400 Plastec DN32 x 45˚ Elbow Push Fit x Spigot PVC-U

Page 30 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

17408 Plastec DN100 x 45degree Extended Elbow Socket x

Spigot PVC-U

17428 Plastec DN 150 Adaptor Spigot x Socket PVC-U

17431 Plastec DN150 Finishing Collar Socket Connection PVC-U

17437 Plastec DN 40 x 90˚ Bend Push Fit x Push Fit Chrome

Plated PVC-U

17457 Plastec DN 40 Connector Push Fit x Tapered Spigot PVC-U

17475 Plastec DN80 Floor Waste and Grating Vinyl PVC-U

17485 Plastec DN100 Floor Waste and Grating Vinyl PVC-U

17496 Plastec DN80x50 Socket Reducer PVC-U

17497 Plastec DN100 x 80 Reducer Adaptor PVC-U

17499 Plastec DN50 x 40 Reducer Adaptor PVC-U

17500 Plastec DN100x65 PVC-U Pipe Reducer PVC-U

17528 Plastec DN 150 Frog Flap PVC-U

17638 Plastec DN40 Connector Spigot x Spigot PVC-U

17639 Plastec DN50 Connector Spigot x Spigot PVC-U

17661 Plastec 100x100mm x DN50 Smart Tile Leak Bypass

Drainage Flange Solvent Cement Connection End PVC-U

17669 Plastec 100x100mm x DN50 Smart Tile Leak Bypass

Drainage Flange Oring Push Fit Connection End PVC-U

17750 Plastec DN100 PVC-U Effuent Diverter Socket x Socket

Tapered PVC-U

17882 Plastec DN32 PVC-U 45 degree Bend Socket x Socket

Tapered PVC-U

Page 31 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

17883 Plastec DN32 PVC-U 88 degree Bend Socket x Socket

Tapered PVC-U

17884 Plastec DN40 PVC-U 45 degree Bend Socket x Socket

Tapered PVC-U

17885 Plastec DN40 PVC-U 88 degree Bend Socket x Socket

Tapered PVC-U

17886 Plastec DN50 PVC-U 45 degree Bend Socket x Socket

Tapered PVC-U

17887 Plastec DN50 PVC-U 88 degree Bend Socket x Socket

Tapered PVC-U

17888 Plastec DN65 PVC-U 45 degree Bend Socket x Socket

Tapered PVC-U

17889 Plastec DN65 PVC-U 88 degree Bend Socket x Socket

Tapered PVC-U

17890 Plastec DN80 PVC-U 45 degree Bend Socket x Socket

Tapered PVC-U

17891 Plastec DN80 PVC-U 88 degree Bend Socket x Socket

Tapered PVC-U

17892 Plastec DN100 PVC-U 5 degree Bend Socket x Socket

Tapered PVC-U

17893 Plastec DN100 PVC-U 15 degree Bend Socket x Socket

Tapered PVC-U

17894 Plastec DN100 PVC-U 30 degree Bend Socket x Socket

Tapered PVC-U

17895 Plastec DN100 PVC-U 45 degree Bend Socket x Socket

Tapered PVC-U

17896 Plastec DN100 PVC-U 88 degree Bend Socket x Socket

Tapered PVC-U

Page 32 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

17897 Plastec DN50x40 PVC-U 45 degree Bend Spigot x Socket

Tapered PVC-U

17898 Plastec DN65 PVC-U 45 degree Bend Spigot x Socket

Tapered PVC-U

17899 Plastec DN65x85 degress PVC-U Bend FemalexFemale

with Inpection Opening PVC-U

17900 Plastec DN50x85 degress PVC-U Bend FemalexFemale

with Inpection Opening PVC-U

17901 Plastec DN32 PVC-U Junction x 45 degrees

FemalexFemalexPlain Ends PVC-U

17902 Plastec DN32 PVC-U Junction x 85 degrees

FemalexFemalexPlain Ends PVC-U

17903 Plastec DN40 PVC-U Junction x 45 degrees PVC-U

17904 Plastec DN40 PVC-U Junction x 88 degrees PVC-U

17905 Plastec DN50 PVC-U Junction x 45 degrees PVC-U

17906 Plastec DN50 PVC-U Junction x 88 degrees PVC-U

17907 Plastec DN65 PVC-U Junction x 45 degrees PVC-U

17908 Plastec DN65 PVC-U Junction x 88 degrees PVC-U

17909 Plastec DN100x50 PVC-U Reducing Junction x 45 degrees PVC-U

17910 Plastec DN100x65 PVC-U Reducing Junction x 45 degrees PVC-U

17911 Plastec DN100 PVC-U Junction x 45 degrees PVC-U

17912 Plastec DN100 PVC-U Junction x 88 degrees PVC-U

17913 Plastec DN150x100 PVC-U Junction x 85 degrees

FemalexFemalexPlain Ends PVC-U

17914 Plastec DN100 PVC-U Inspection Coupling

FemalexFemale PVC-U

Page 33 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

17915 Plastec DN100 PVC-U Inspection Coupling MalexFemale PVC-U

17916 Plastec DN50x40 PVC-U Level Invert PVC-U

17917 Plastec DN65x40 PVC-U Level Invert PVC-U

17918 Plastec DN65x50 PVC-U Level Invert PVC-U

17919 Plastec DN80x40 PVC-U Level Invert Taper PVC-U

17920 Plastec DN80x50 PVC-U Level Invert Taper PVC-U

17921 Plastec DN100x50 PVC-U Level Invert PVC-U

17922 Plastec DN100x65 PVC-U Level Invert PVC-U

17923 Plastec DN100x80 PVC-U Level Invert PVC-U

17924 Plastec DN150x100 PVC-U Level Invert Taper PVC-U

17925 Plastec DN32 PVC-U Straight Coupling PVC-U

17926 Plastec DN40 PVC-U Socket PVC-U

17927 Plastec DN50 PVC-U Socket PVC-U

17928 Plastec DN65 PVC-U Socket PVC-U

17929 Plastec DN65 PVC-U Puddle Flange PVC-U

17930 Plastec DN 50 PVC-U Slip Repair Coupling PVC-U

18017 Plastec DN100 Bend x 5 degrees Bend Socket x Spigot PVC-U

18018 Plastec DN100 Bend x 15 degrees Bend Socket x Spigot PVC-U

18019 Plastec DN100 Bend x 30 degrees Bend Socket x Spigot PVC-U

18020 Plastec DN100 x 88 degrees Swept Bend Socket x Spigot PVC-U

18022 Plastec DN100 x 45° Junction PVC-U

18023 Plastec DN100 x 88˚ Swept Junction PVC-U

Page 34 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

18033 Plastec DN100 x 45˚ LH Access Junction Assembly PVC-U

18034 Plastec DN100 x 45˚ RH Access Junction Assembly PVC-U

18043 Plastec DN100 Inspection Opening Expansion PVC-U

18071 Plastec DN225 Threaded Cap PVC-U

18091 Plastec DN100 Stack Diverter PVC-U

18100 Plastec

DN100 Stack Diverter (18091) Combined with

Expansion Joint (18671) and Inspection Opening

(18834)

PVC-U

18102 Plastec DN100 x 88˚ Stormwater/DWV Boss PVC-U

18103 Plastec DN100 x 45˚ Stormwater/DWV Boss PVC-U

18111 Plastec DN225 Bolted Cap Screw PVC-U

18154 Plastec DN100 Bend x 42.5 degrees Bend Socket x Spigot PVC-U

18156 Plastec DN225 Threaded Coupling PVC-U

18208 Plastec DN65 Bend x 42.5 degrees Bend Socket x Spigot PVC-U

18215 Plastec DN100 Bend x 42.5 degrees Bend Socket x Spigot PVC-U

18532 Plastec DN100 x 45 degree Junction PVC-U

18582 Plastec DN40 Repair Slip Connector Spigot x Socket PVC-U

18586 Plastec DN 100 x 65 Extended Elbow PVC-U

18655 Plastec DN 100 x 45 M/F Elbow Heavy Duty PVC-U

18667 Plastec DN 100 Socket x Spigot Flanged Adaptor PVC-U

18708 Plastec DN100 Push Fit Adaptor Solvent Cement Spigot PVC-U

18711 Plastec DN150 Push Fit Adaptor Solvent Cement Spigot PVC-U

18781 Plastec DN 100 x 43 degree Spigot x Socket Elbow Heavy

Duty PVC-U

Page 35 of 35

Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:admin@certificationservices.com.au www.certificationservices.com.au

www.jas-anz.org/register

Certificate Number: 239

Issue Date: 7th September 2017

Issue: 02 Revision: 30

Model

Identification

Brand

Name Product Description Material Designation

18782 Plastec DN 100 x 43 degree Socket x Socket Elbow Heavy

Duty PVC-U

18795 Plastec DN40 x 43 degree Elbow Socket x In Pipe Spigot PVC-U

18796 Plastec DN50 x 43 degree Elbow Socket x In Pipe Spigot PVC-U

18834 Plastec DN100 Inspection Opening Spigot x Spigot PVC-U

18837 Plastec DN150 Inspection Opening Solvent Weld Spigot x

Spigot PVC-U

18841 Plastec DN225 Inspection Opening Solvent Weld Spigot x

Spigot PVC-U

18842 Plastec DN150 x 43 degree Elbow Solvent Weld Socket x

Spigot PVC-U

18843 Plastec DN150 x 43 degree Elbow Solvent Weld Socket x

Socket PVC-U

18844 Plastec DN150 x 45 degree Y Junction PVC-U

18848 Plastec DN225 x 45 degree Y Junction PVC-U

18870 Plastec DN40 Push Fit Connector Elastomeric Seal PVC-U

18871 Plastec DN50 Push Fit Connector Elastomeric Seal PVC-U

18931 Plastec DN100 Stack Diverter PVC-U

18949 Plastec DN100 x 80 degree Sweep Bend Socket x Socket

Solvent Weld PVC-U

18964 Plastec DN100 x 50 x 50 x 50 x 40 Riser Junction

Extended Top Solvent Weld PVC-U

18991 Plastec DN100 x 50 x 50 x 40 x 40 Riser Junction

Extended Top Solvent Weld PVC-U

19041 Plastec DN150 x 100 Reducer Adaptor PVC-U