SHORT FORM LIGHTING CATALOGUE
2019/20
light creates colour...
About us We as Genlux Lighting are one of the leading local manufacturers of high performance outdoor, commercial, industrial and roadway lighting continuously strive to incorporate local and international best available technologies in our products.
With this commitment to “B.A.T” (Best Available Technology) in our product range we have aligned ourselves with local and international technology partners to ensure that we meet all relevant technical standards, ensuring that we supply our customers with the highest quality products on time and at a competitive market related price.
Genlux Lighting boasts a range of locally produced high pressure die cast aluminum (LM6 grade) luminaires, we are one of the largest local manufactures of outdoor, commercial, industrial and roadway lighting in South Africa. We are proud to be 100% South African owned and managed.
Genlux Lighting has a strong focus on continuous improvement throughout the organisation which is reflected through the on-going optimisation of our current lighting range and the identification, sourcing and introduction of new lighting technologies to the South African market.
Index About us outdoor Led LIghtIng roAdwAy Led LIghtIng IndustrIAL Led LIghtIng Indoor Led LIghtIng sensors InformAtIon
23
4 - 5 6 - 78 - 9
1011
2
our mIssIonOur mission, is to remain a sustainable and profitable business within the ACTOM (Pty) LTD group that provides quality products in the industrial, roadway, outdoor commercial, indoor commercial, area lighting and light management systems market sectors.
We intend, in particular, to provide energy efficient lighting solutions by utilising and offering the latest lighting technology and trends, combined with strong technical and solution support to our customers. We will serve the interests of our customers, staff and shareholders by continously striving to achieve this task.
AbOUT UsWe as Genlux Lighting are one of the leading local manufacturers of high performance outdoor, commercial, industrial and roadway lighting continuously striving to incorporate local and international best available technologies in our products.
With this commitment to “B.A.T” (Best Available Technology) in our product range we have aligned ourselves with local and international technology partners to ensure that we meet all relevant technical standards, ensuring that we supply our customers with the highest quality products on time and at a competitive market related price. We are also proud to be 100% South African owned and managed.
Genlux Lighting has a strong focus on continuous improvement throughout the organisation which is reflected through the on-going optimisation of our current lighting range and the identification, sourcing and introduction of new lighting technologies to the South African market.
dIscLAImerE.&O.E. (errors and omissions excepted)Important note: Due to the rapid development in LED technology the performance values, power consumption and lumen output levels stated herewithin are subject to change without prior notice.
symboL gLossAry
IPXX FIngress Protection Rating
Class 1 Insulation Classification
Dimming Protocol Suitable to be mounted on normally flammable surfaces
EMG
Emergency Compatible
IKXX
Impact Protection Rating
Unified Glare Rating
UGR<19
DALI Compatible
1-10V
OUTDOORLED LIGHTING
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:17W 1 820 lm 50 000 hours @ 10 hrs
average burning time per day @ ta 35°C
Gravity die-cast LM6 aluminium finished with durable corrosion and weather-resistant epoxy powder coating. Stainless steel grub screws for all weather conditions with vacuum-formed, UV-stabilized high-impact acrylic diffuser, sealed to the base and luminaire cover with silicone gaskets.
35W 3 630 lm
50W 5 450 lm
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:10W 840 lm 50 000 hours @ 10 hrs
average burning time per day @ ta 35°C
High-pressure die-cast LM6 aluminium finished with powder coating with an injection-molded high-impact acrylic diffuser is fitted over a silicone gasket. The diffuser is manufactured in an opalized material for optimum diffusion and uniform light output.
15W 1 134 lm
20W 1 511 lm
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:10W 840 lm 50 000 hours @ 10 hrs
average burning time per day @ 35°C
High-pressure die-cast LM6 aluminium finished with powder coating with an injection-molded high-impact acrylic diffuser is fitted over a silicone gasket. The diffuser is manufactured in an opalized material for optimum diffusion and uniform light output.
15W 1 134 lm
20W 1 511 lm
3
Venus
neptune
VestA
IP65
IP66
IP66
ROADWAY LED LIGHTING
gen IILED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:70 - 280W 9 090 - 33 656 lm 100 000 hours @ 10
hrs average burning time per day @ ta 35°C
High-pressure die-cast LM6 aluminium finished with durable polyester epoxy powder coating with a clear tempered glass diffuser.
gen ILED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:15 - 120W 1 704 - 14 094 lm 100 000 hours @ 10
hrs average burning time per day @ ta 35°C
High-pressure die-cast LM6 aluminium finished with durable polyester epoxy powder coating with a clear tempered glass diffuser.
gen ZeroLED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:20 - 52W 2 353 - 6 301 lm 100 000 hours @ 10
hrs average burning time per day @ ta 35°C
High-pressure die-cast LM6 aluminium finished with durable polyester epoxy powder coating with a clear tempered glass diffuser.
IP66 IK08 1-10V
IP66 IK08
IP66 IK08
1-10V
1-10V
4
proxImo
5
AtLAs bAsIc
AtLAs eVo
AtLAs AdVAnced
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:34W 4 150 lm 100 000 hours @ 10
hrs average burning time per day @ ta 25°C
High-pressure die-cast ADC12 aluminium finished with durable polyester epoxy powder coating with a clear tempered glass diffuser.
42W 5 660 lm
66W 8 200 lm
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:93W 12 270 lm 100 000 hours @ 10
hrs average burning time per day @ ta 25°C
High-pressure die-cast ADC12 aluminium finished with durable polyester epoxy powder coating with a clear tempered glass diffuser.
120W 15 800 lm
151W 19 860 lm
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:93W 12 270 lm 100 000 hours @ 10
hrs average burning time per day @ ta 35°C
High-pressure die-cast EN44100 aluminium body, finished with durable polyester epoxy powder coating with a clear tempered glass diffuser.
120W 15 800 lm
151W 19 860 lm
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:132W 17 050 lm 100 000 hours @ 10
hrs average burning time per day @ ta 25°C
High-pressure die-cast ADC12 aluminium finished with durable polyester epoxy powder coating with a clear tempered glass diffuser.
160W 20 600 lm
roAdLedLED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:24 - 70W 2 575 - 7 539 lm 60 000 hours @ 10 hrs
average burning time per day @ ta 35°C
High-pressure die-cast EN44100 aluminium body incorporating atmospheric pressure regulating features, finished in an epoxy powder coating and a clear tempered glass diffuser.
34 - 100W 3 494 - 10 272 lm
93 - 138W 10 042 - 14 612 lm
132 - 196W 13 583 - 20 116 lm
IP66 IK08
IP66 IK08
IP66 IK08
IP66 IK08
IP66 IK08
1-10V
INDUSTRIALLED LIGHTING
6
KrAtos
VuLcAn eVoLED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:20 - 35 W 2 500 - 4 200 lm 100 000 hours @ 10
hrs average burning time per day @ ta 35°C
High-pressure die-cast LM6 aluminium finished with durable polyester epoxy powder coating with a clear tempered glass diffuser.
55 - 70W 5 850 - 8 400 lm
VuLcAn LedLED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:35W 4 630 lm 50 000 hours @ 10 hrs
average burning time per day @ ta 35°C
The main body is manufactured from high-pressure die-cast LM6 aluminium with an injection molded high-impact, acrylic diffuser with internal prisms secured with 4 stainless steel screws.
80W 6 945 lm
70W 9 260 lm
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:100 - 300W 12 547 - 35 955 lm 100 000 hours @ 10
hrs average burning time per day @ ta 35°C
High-pressure die-cast LM6 aluminium finished with durable polyester epoxy powder coating with a clear tempered glass diffuser.
360 - 596W 41 020 - 71 910 lm
895W 107 865 lm
IP65 F EMG
IP66 F IK08
IP66 F EMG
IK08
seLene
chI eVo
7
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:10 - 15W 1 140 - 1 760 lm 50 000 hours @ 10 hrs
average burning time per day @ 35°C
Stainless steel body, with a translucent, chemically resistant, tempered glass diffuser and a white epoxy powder coated, stainless steel reflector. Safety film available on request.
18 - 43W 2 090 - 5 100 lm
22 - 54W 2 540 - 6 410 lm
Body sizes: 2ft., 4ft., 5ft.
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:10 - 15W 1 260 - 1 950 lm 50 000 hours @ 10 hrs
average burning time per day @ ta 35°C
UV stabilised and impact-resistant, grey polycarbonate body, UV stabilised and impact-resistant, translucent, polycarbonate diffuser and a rolled steel, sheet metal reflector. Zone 2 / 22 version available.
18 - 43W 2 320 - 5 650 lm
22 - 54W 2 810 - 7 090 lm
Body sizes: 2ft., 4ft., 5ft.
fortes 4-wAyLED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:140W 22 400 lm 100 000 hours @ 10
hrs average burning time per day @ ta 35°C
CNC formed 304 stainless-steel housing. Epoxy powder coated. With a hot dipped, galvanized, adjustable 304 stainless-steel stirrup bracket, with an integrated angular degree indicator.
208W 32 800 lm
292W 40 400 lm
fortes 6-wAyLED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:210W 33 600 lm 100 000 hours @ 10
hrs average burning time per day @ ta 35°C
304 Stainless-steel strengthening sub-frame structure encloded in a laser cut and CNC formed 304 stainless-steel housing. Epoxy powder coated. With a high strength, adjustable 304 stainless-steel stirrup bracket system, with an integrated angular degree indicator.
312W 49 200 lm
348W 60 600 lm
gen fLoodserIes LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:
80 - 120W 9 451 - 14 094 lm 100 000 hours @ 10 hrs average burning time per day @ ta 35°C
High-pressure die-cast LM6 aluminium finished with durable polyester epoxy powder coating with a clear tempered glass diffuser.
140 - 280W 16 802 - 33 656 lm
IP65 F EMG
IP66 IK08
IP66 IK08
IP66 IK08
IK10
IP65 F EMGIK10
1-10V
1-10V
1-10V
AdeLIA
ALenA
mILA
INDOORLED LIGHTING
8
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:10 - 22W 1 040 - 2 350 lm 50 000 hours @ 10 hrs
average burning time per day @ ta 35°C
Roll formed, white powder coated, sheet steel body with a UV stabilised and impact-resistant, translucent, polycarbonate diffuser.
18 - 42W 1 910 - 4 640 lm
22 - 53W 2 310 - 5 800 lm
Body sizes: 2ft., 4ft., 5ft.
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:18 - 30W 2 300 - 3 920 lm 50 000 hours @ 10 hrs
average burning time per day @ ta 35°C
UV stabilised and impact-resistant, grey polycarbonate body, with an aluminium heat sink, a UV stabilised and impact-resistant, translucent, polycarbonate diffuser and a rolled steel, sheet metal reflector.
35 - 85W 4 570 - 11 660 lm
44 - 106W 5 750 - 14 580 lm
Body sizes: 2ft., 4ft., 5ft.
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:35W 4 384 lm 70 000 hours @ 10 hrs
average burning time per day @ ta 25°C
White epoxy powder coated, sheet metal housing, with a UV stabilised and impact-resistant, translucent, acrylic diffuser. Also available in micro linear prismatic diffuser.
53W 6 575 lm
IP66 F EMG
IP40 F EMG
IP20 EMG
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:9.5 - 18.5W 1 000 - 2 350 lm 50 000 hours @ 10 hrs
average burning time per day @ ta 25°C
High-pressure die-cast aluminium frame finished in textured powder coating. Extruded anodised aluminium heat sink. LED recessed downlight with a deep recessed light function. With faceted aluminium reflector and optional clear or frosted glass.
9.5 - 38.5W 1 000 - 4 300 lm
Cut out ø sizes: 115mm; 140mm
oLgA L
oLgA s
oLgA r
bAtten
9
downLIghts
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:18 - 58W 2240 - 7280 lm 50 000 hours @ 10 hrs
average burning time per day @ ta 35°C
UV stabilized and impact-resistant white polycarbonate body, with a UV stabilized and impact-resistant translucent, polycarbonate diffuser and a white epoxy powder coated, CNC punched sheet metal reflector.
Body sizes: 4ft.
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:10 - 27W 1 180 - 2930 lm 50 000 hours @ 10 hrs
average burning time per day @ ta 35°C
UV stabilized and impact-resistant white polycarbonate body, with a UV stabilized and impact-resistant translucent, polycarbonate diffuser and a white epoxy powder coated, CNC punched sheet metal reflector.
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:10 - 27W 1 180 - 2 890 lm 50 000 hours @ 10 hrs
average burning time per day @ ta 35°C
UV stabilized and impact-resistant white polycarbonate body, with a UV stabilized and impact-resistant translucent, polycarbonate diffuser and a white epoxy powder coated, CNC punched sheet metal reflector.
LED OptiOns: LED LifE CyCLE: KEy tEChniCaL infO:20 - 40W 1 260 - 1 950 lm 70 000 hours @ 10 hrs
average burning time per day @ ta 25°C
White epoxy powder coated (RAL 9003), 0.8mm mild steel, CNC formed sheet metal body, with a UV stabilized and impact-resistant opalised, polycarbonate diffuser. For surface or P2000 mounting.
35 - 50W 4 784 - 6 260 lm
Body sizes: 4ft., 5ft.
IP54 F EMG
IP54 F EMG
IP54 F EMG
IP40 F UGR<19 EMG
IP40 F EMG
10
ceILIng sensor
hIgh bAy sensor
wALL mount sensor
SENSORS
typE: KEy tEChniCaL infO:PIR / Ultrasonic (Dual Technology) Ceiling Mounted Sensor
• Mounting height from 2.5m to 3.4m• Coverage area:
• PIR 148m²• Ultrasonic 93m²
• Switches up to 800W• 360° viewing field • 5 sec to 30 min adjustable time delay • Adjustable ambient light level overide
typE: KEy tEChniCaL infO:PIR / Ultrasonic (Dual Technology) Wall Mounted Sensor
• Mounting height from 1.2m to 1.5m• Coverage area:
• PIR 111m²• Ultrasonic 37m²
• Switches up to 800W• 180° viewing field• 15 sec to 30 min adjustable time delay • Adjustable ambient light level overide
typE: KEy tEChniCaL infO:PIR High bay Sensor • Mounting height from 4.5m to 15m
• Coverage area:• Lens (1) 111m²• Lens (2) 260m²
• Switches up to 800W• 360° viewing field• 15 sec to 30min adjustable time delay • Adjustable ambient light level overide
11
Ingress protectIon And ImpAct protectIon gLossAry
No Protection.
0
Any large surface of the body > 50mm, such as the back of a hand.1
2
3
0
1
2
3
7
8
ip ip iK
MEChaniCaL iMpaCt REsistanCE
2nD figuRELiquiD paRtiCLE pROtECtiOn
1st figuREsOLiD paRtiCLE pROtECtiOn
Fingers or similar objects >12.5mm.
Tools, thick wires, etc. >2.5mm.
No Protection.
Dripping water (vertically falling drops).
Water dripping at any angle up to 15º from the vertical.
Water falling as a spray at any angle up to 60º from the vertical.
Immersion in water.
Continuous and prolonged immersion in water.
05 0mm
12.5mm
0
4 4Most wires, screws, etc. >1mm.
Water splashing from any direction.
5 5Protected against dust. Water projected by a nozzle
from any direction.
6 6No ingress of dust. (dust tight).
Water projected in powerful jets from any direction.+
+
00 0.0J No Protection.
01 0.15J
02 0.20J
03 0.35J
04 0.50J
05 0.70J
06 1.00J
08 5.00J
10 20.00J
09 10.00J
07 2.00J
0.2kg
0.2kg
0.2kg
0.2kg
0.2kg
0.5kg
1.7kg
5kg
3kg
0.5kg
75mm
100mm
175mm
250mm
350mm
200mm
295mm
400mm
200mm
400mm
www.genluxlighting.co.za
JOHANNESBURG (Head office)4 Branch Rd, Driehoek, Germiston, 1401P.O. Box 1183 Germiston
Tel: +27 (0)11 825 3144/5Fax: +27 (0)86 508 5595
Email: [email protected]
DURBAN70 Solomon Mahlangu Drive, Rossburgh 4094P.O. Box 922, Durban 4000
Tel: +27 (0)31 465 4170Fax: +27 (0)31 465 4189
Email: [email protected]
PORT ELIZABETH200 Kempston Road, Sidwell, Port Elizabeth 6001P.O. Box 3503, North End, Port Elizabeth 6056
Tel: +27 (0)41 451 5641Fax: +27 (0)41 451 5650
Email: [email protected]
CAPE TOWN12 Hawkins Avenue, Epping Industria No 1, 7460P.O. Box 276, Eppindust, Cape 7475
Tel: +27 (0)21 532 2000Fax: +27 (0)21 532 2013
Email: [email protected]