1

LIQUIPOX CTE(Two component high build Coal tar epoxy coating)

R

2

Technical Information

Colour : Black

Gloss : Egg shell

Specific gravity : 1.3 ± 0.05

Mixing ratio : 3 : 1

Film thickness : 125- 150 (microns / coat )

Surface dry : 2-4 hours

Recoatablity : 10 -12 hours

Full curing : 7 days

Easy to application

Better adhesion

Good corrosive resistant

Better Chemical resistant

Economical

Sewage and Effluent treatment plant.

Cooling towers and Storage tanks in fertilizer, refinery, petrochemical industry

Underground pipe lines

Thermal power plants-water inlet and outlet channels, ash ponds, coal handling units etc.

Splash zone in dock and harbors

Molasses tanks in sugar industry

Industrial flooring in chlorine alkali plants

Product DescriptionLIQUIPOX CTE is a combination of Coal tar & Epoxy with corrosive resistant in nature. It is a two component system. It is used as an anticorrosive and protective coating for concrete as well as steel structure, because, it has excellent chemical resistant properties in atmosphere or in contact with chemicals.

Uses

Advantages

Brush: Good to brush on small area only.

Roller: Thinned to 5% by volume maximum if required.

Conventional spray: Use standard and air pressure of 50-70 PSI.

Airless spray: Use tip size of 0.38-0.48 cm and tip pressure of 1800 -2300.

Application

LIQUIPOX CTER

Surface Preparation

Surface must be clean and free from dirt, rust, grease, oil and loose particles. Thoroughly clean the concrete surface by harsh wire brushing. Clean the dust by compressed air. If possible, wash the surface with water to remove accumulated dust & dirt to achieve good bonding. If it is steel surface, clean to remove rust scales, by wire brushing & scrapping. The best method to clean the surface is sand/grit blasting for best performance. For new surfaces to clean oil and grease use degreasing solvents, such as turpentine or thinners. Surface must be dry before application.

Coverage 3-3.5 m² per kg at 125 microns ofthickness.

Storage

Liquipox CTE has a Shelf life of 12 months from the date of manufacturing, if unopened containers are stored in a cool dry place.

Packing 15 Kg +5 Kg container(Base+Hardener).

Safety Precautions

Avoid prolonged contact with skin. Wear protective gear for the hands & eyes. Splashes on the skin should be washed away be cleaning with soap and water. In case of contact with eyes, wash thoroughly with clean water. If swallowed, do not induce vomiting. In both cases seek medical attention. The product is non-flammable.

IWL INDIA LIMITED

3

01-2018-A

LIQUIPOX CTER

www.iwl.in

IWL INDIA LIMITED - HEAD OFFICE

W-360, North Main Road, Anna Nagar West Extension, Chennai - 600 101

Ph: 044-26156000 / 044-26152100 / 044-26156900

E-mail : iwl@iwl.in

ISO 9001 : 2015 Certified Company

IWL India Limited was incorporated in 1988, to manufacture revolutionary, modified bitumen based, waterproofing membranes and anti corrosive tapes. Since then, we have diversified into a number of other product lines, including Road Products, Liquid Waterproofing Membranes, Coatings, Adhesives, Admixtures and Construction Chemicals. We have a dedicated team of 150 highly experienced professionals in our direct employ. With an ISO 9001 certification to boot, our products are approved by all major consultants, clients and contractors including Military Engineering Services, Nuclear Power Corporation of India, Engineers India Limited, National Thermal Power Corporation, Larsen & Toubro, Nuclear Power Complexat Kudangulam, Nuclear Power Complex at Kaiga and Bangalore, Kolkatta, Delhi and Ahmedabad Metro Projects.

CHENNAI

DELHI

MUMBAI

VISAKHAPATNAM

- Sales & Marketing

- Factory