MyCricket NavigationMyCricket Administration site – use this to set everything up

Scorer LoginsClub to provide Scorer Logins … one generic or one for each team.Multiple people can use the same Login at the same timeADMINISTRATION Tab … Users -> User List

STEP 1 – SELECT TEAMS• CompletepriortothegameinMyCricketAdmin

STEP 2 – ENTER RESULT• BasicMatchResult(winner/loser)andteamscores• EnterASAPfollowingendofthematch

STEP 3 – ENTER PLAYER SCORES• EnterASAPusingacopyofscoresheet/book• Usedtocalculateoverallplayerstatsandawards

Weekly Results Tasks for ClubsRecommend making this a requirement within competitions

Selecting TeamsTEAMS Tab … Matches -> Select Team

Manually Enter ResultTEAMS Tab … Matches -> Enter Match Result

Manually Entering Player ScoresEasy to do once your player information is in. Select Teams -> Enter Results -> Update Scorecard. TEAMS Tab … Matches -> Enter Player Scores

• App version of the MyCricket public websites• Check any live scores plus completed results, ladders and stats

MyCricket App – search for “MyCricket” in the App storesThe best way for players and supporters to follow scores, stats, ladders, fixtures and news.

• Scorers only need to be online at two points, and both can be done at home either side of the game:

1. LogintotheScorerAppanddownloadyourmatch2. SyncanyresultsfromtheApptoMyCricket

• All scoring can be done offline and will remain within the App until you sync the results.

• The App uses approx. 500KB of data per 80 overs

Online vs. OfflineA common thought is you must be online to use the Scorer App – this is FALSE

• Editing balls flows through to changing strike batters• Delete balls from previous overs• Add nicknames to players• Edit ball to edit a wicket / change dismissed batter

• QLD Cricket will again be using MyCricket Live Score for all Junior State Championships

Updates for 2019/20Based on early September Release

Match Set UpLogin using your credentials and adjust the settings on your right.Your club will need to provide you with login details.

• Open Live Score and CONTINUE WITHOUT LOGGING IN • Select DEMO MATCH

• Team Selection• Match Setup

• TOSS – Melbourne Stars are batting

PRACTICAL SESSIONCustom Match and Demo Match both available

Match SettingsSet per grade setup – may need to adjust for your device

• Association sets Match Format (eg 50 over, Stage 2 etc)• Confirm Balls / Batting Minutes / Full Names / Wagon Wheels

• RECOMMEND– ConfirmandNamesON• WagonWheels– OFF

• Overs / Limitations / Max Balls per Over / Values / Balls Faced

• RETIREMENTS – Prompts for scorers (Runs or Balls Faced)

Match Settings ExplainedMost already established by Association

Team SelectionAdjust Captain, Keeper, Alias, Add Players

• Add Players or Add Unknown Player located at bottom of screen• EnteranynameinUnknownPlayerandscorenormally• Fullmatchwilluploadcorrectly• CanswapresultsdirectlytoprofileviaMCAdmin• Playerwillneedtoregistercorrectlytoswapinfo

• Use Unknown Player for casuals, fill ins or player swaps• Can access Team Selection from Live Score screen to change Wicket

Keepers

Team Selection Options (MyCricket Live Score App)Recommend selecting in MyCricket Admin but not required

Live Scoring Screen

SCORING – All scoring happens at the scoring bar down the bottom, and each ball will populate on the right-hand side.

EDITING – Each ball has an edit symbol assigned to it – open that to edit that ball. Any changes to runs you make here will flow through, can also add/delete a ball or a wicket

UNDO – Blue symbol– goes right back to the 1st ball of the innings

VIEW SCORECARD – Top right corner, use this for all scorecard edits other than the UNDO method.

CHANGING BATTERS / BOWLER DUE TO ERROR / INJURY – Select their name on your scoring screen and follow the change prompts. Select the correct player and all recorded balls will flow through.

RETIRED BATTERS – Select their name and Change Batter. Select the new batter and when prompted, choose “Retiring Not Out”

CHANGE STRIKE – Select one batter, and Change Strike

WICKET – Select the red button and follow the prompts. You will be taken back to the live screen and confirm wicket with a TICK

RUN OUTS – Record the wicket and ensure the top menu (Batter Out) lists the correct player run out. You will be taken back to the live page and can ADD RUNS by selecting the value, then TICK

Scoring Scenarios

NO BALL + RUNS – Always select No Ball first then add Bye / Leg Bye if applicable, followed by value of Runs scored.

WIDES – A standard Wide recorded with the TICK, but when additional runs are scored the Wide value needs to be included. If batters run, enter the total value for the WIDE and RUNS

WICKET OFF EXTRAS – Record the Extra including values, then select WICKET and complete details. Confirm all with the TICK.

PENALTY RUNS – Located at the 5+ scoring option CONFIRM BALLS OFF / ON –Match Settings menu in the top rightLATE TEAM SELECTION – Add players via the menu in the top rightUNKNOWN PLAYER – Add at Team Selection and score normally

END INNINGS – Select Match Actions at the bottom and close innings (select Close Innings Type as All Out or Compulsory Close) then select Done in the top right. You will be asked to confirm.NEXT INNINGS – From the blank screen select New Innings (located next to the red icon) and follow the prompts.

END MATCH – Match Actions – End Match and follow the prompts. Once scorecards are checked select Done in the top right and choose save and exit (if offline) or Finalise to sync the result.

Scoring Scenarios

10th Wicket• The Scorer App will want to end the Innings – but read the prompt and

select CANCEL (left side) to carry on• You will have one blank batter – tap that and select the new player from

the list• You will only be asked to End Inns at 10th Wicket and can continue

scoring PASSING THE TARGET• The App will want to end the match, but again you can ignore this and

continueMyCricket Live Score will prompt you through all tasks

Scorer App PromptsBe alert at the fall of the 10th Wicket and passing of the target

• After everyone has batted the App will want to close the innings:

Returning BattersAny batter retired can come back and resume their innings

Hit CANCEL to resume the inningsVery important to follow the prompts as it CAN’T be reversed.Select the blank name to bring up your available batters again

Converting Unknown Player to a known playerHave the player register or transfer correctly through MyCricket / PlayCricket first, and then add them via Team Selection

Replacing PlayersComplete this through MyCricket Admin -> Team SelectionJUNIOR PLAYER TRANSFER (TEAM SWAP) PROCESS STILL TO BE CONFIRMED

QLDCRICKETSTRONGLYRECOMMENDSONESCOREBOOKANDONEMYCRICKETAPPFOREACHGAME– THISISTHESTANDARDFORFIRSTCLASS,W/BBLANDPREMIERCRICKET

• Get familiar with edit options – Blue Undo button is great

• Select your teams before the game – device fully charged

• Custom Match & Demo Match – built in with footage available

• Freeze – Hard reset and reload the match again

• DON’T PANIC – Can always fix it later in scorecard or Admin

Best Practice TipsMake sure you do one practice run before your first game!

• Cricket Australia will have additional text and video resources• QueenslandCricketwillrelaunchtrainingresourcesasneeded

• Further MyCricket Support including phone support for Saturday fixtures (including early morning) and Sunday from early Oct

• Phone 1800 CRICKET (1800 274 25 38) for Match Support

• Facebook Group – Search for “MyCricket Peer Support”

Support and TrainingA range of Cricket Australia Resources will be available

MyCricket AppSearch for ‘MyCricket’ in the App Store or Google Play – search for Association / Club

• All competitive matches to have scores attached to ito MyCricketLiveScoreisthemostefficientway

• Complete MyCricket information allows QLD Cricket to provide all available support and resources to your clubs

• Seek support with CA and QLD Cricket resources• Non-VDCC Members please sign Registration Sheet to receive

additional resources from this WorkshopAndrew.Keyte@qldcricket.com.au / 0400 621 152

MyCricket Wrap UpA very brief overview today