Low PressureCuTTING AND CrIMPING TooL

LP6 - 6 Ton Hydraulic Crimper/Cutter

LOW PRESSUREHydraulic Cutting and Crimping ToolImproved Usability ■ 22% less weight versus existing

competitive models

Platform Versatility ■ Incorporates the same crimping and

cutting jaws as Greenlee battery platform EK425L and EK628L

LP6

Dies for use with service entrance connectors, c-taps, h-taps, overheaD anD unDergrounD connectors (Use with EK245L with CJD3, CJD3BG & CJD30 jaws. Use with EK425L with CJK jaws with F020735 adapters.)

“w”-style Diescat. no. upc no. burnDy no. cat. no. upc no. burnDy no.KD6-10 10165 W-BG KD6-18 10173 W-166KD6-11 10166 W-O KD6-19 10174 W-243KD6-12 10167 W-C KD6-20 10175 W-247KD6-13 10168 W-K840 KD6-21 10176 W-249KD6-14 10169 W-161 KD6-22 10177 W-164KD6-15 10170 W-162 KD6-24 10179 W-237KD6-16 10171 W-163 KD6-25 10180 W-239KD6-17 10172 W-165 KD6-27 10182 W-28K

CRIMPING jAw COMPATIbILITy bRAND TyPE/sERIEs

CJD3BGCJD30CJD3CJK**Requires F020735 Adapters

Greenlee® KD6 SeriesFCI Burndy® W, X SeriesIlsco® ND Series

Huskie® HT-58 Series

Panduit® CD-2001 Series

CJK Kearney™ Dies for Type “O” tools

CJXPJ Nicopress connectors

Connectors that require the X, P or J tool grooves

CuTTING jAw COMPATIbILITy

CJB • One time disposable lock hasps 4 AWG Alumoweld

• ACSR 1/0 (Does not cut fully through all of the aluminum strands. The cable must be flexed to complete the separation).

CJD3BG CJBCJKCJD3CJD30 CJXPJ

22% LEss wEIGht

Interchangeable crimping and cutting jaws vs. competitive fixed jaw head

350° Rotating head aids in

access to tight spaces

spring loaded pin for quick change over

jaws

VErsatILE

Dies for use with service entrance connectors, c-taps, h-taps, overheaD anD unDergrounD connectors (Use with EK245L with CJD3, CJD3BG & CJD30 jaws. Use with EK425L with CJK jaws with F020735 adapters.)

“w”-style Diescat. no. upc no. burnDy no. cat. no. upc no. burnDy no.KD6-10 10165 W-BG KD6-18 10173 W-166KD6-11 10166 W-O KD6-19 10174 W-243KD6-12 10167 W-C KD6-20 10175 W-247KD6-13 10168 W-K840 KD6-21 10176 W-249KD6-14 10169 W-161 KD6-22 10177 W-164KD6-15 10170 W-162 KD6-24 10179 W-237KD6-16 10171 W-163 KD6-25 10180 W-239KD6-17 10172 W-165 KD6-27 10182 W-28K

Light weight, enabling one hand operation –

8.4 lbs with jaw

Factory installed coupler

option for ease of

purchase

SIMPLIFIED CUSTOMIZING ■ the LP6 has either an open or closed center option. ■ LP6 is available with or without couplers installed from the factory. ■ Can be ordered bare or with the specified crimping or cutting jaw included. ■ simply determine the following to order your LP6 hydraulic tool.

1. hydraulic system configuration (open or closed)2. Coupler option (with or without)3. Crimping/cutting jaw preference

sPECIFICATIONsCrimping Force 6 Tons (54 kN)

Length (with jaws) 20-1/2" (521mm)

Width (head open) 4-1/2" (114mm)

Weight (with jaws) 8.4 lbs (3.8kg)

CONNECTOR CAPACITy5/8" Service Entrance Connectors

10-1/0 AWG

.840 Service Entrance Connectors

1/0-4/0 AWG

Aluminum “H” Taps 6-4/0 AWG

Copper “H” Taps 10-2 AWG

Copper Tension Splices 6-2/0 AWG

All Aluminum Tension Splices 6-4/0 AWG

One Piece ACSR Tension Splices

4-1/0 AWG

Two Piece ACSR Tension Splices

2 AWG-477 kcmil

Aluminum Jumper Splices 4 AWG-266.8 kcmil

Stirrups 2-4/0 AWG

Aluminum Color-Coded Lugs and Splices

8-4/0 AWG

www.greenlee.com MA-5785 06/12

4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070©2012 Greenlee Textron Inc., Greenlee Textron Inc. is a subsidiary of Textron Inc.

ORDERING INFORMATION

CAT NO. UPC NO. DESCRIPTION JAW CONFIGURATION COUPLERS OPEN/CLOSED

CENTERSTD PK

LP6-01 00816 6 Ton Hydraulic Crimping Tool - Bare - No Coupler - Open Center Bare No OPEN 1

LP6-02 00817 6 Ton Hydraulic Crimping Tool - Bare - No Coupler - Closed Center Bare No CLOSED 1

LP6-03 00818 6 Ton Hydraulic Crimping Tool - Bare - Coupler - Open Center Bare Yes - 3/4-16 SAE OPEN 1

LP6-04 00819 6 Ton Hydraulic Crimping Tool - Bare - Coupler - Closed Center Bare Yes - 3/4-16 SAE CLOSED 1

LP6-05 00821 6 Ton Hydraulic Crimping Tool - CJD3BG - No Coupler - Open Center CJD3BG No OPEN 1

LP6-06 00822 6 Ton Hydraulic Crimping Tool - CJD3BG - No Coupler - Closed Center CJD3BG No CLOSED 1

LP6-07 00823 6 Ton Hydraulic Crimping Tool - CJD3BG - Coupler - Open Center CJD3BG Yes - 3/4-16 SAE OPEN 1

LP6-08 00824 6 Ton Hydraulic Crimping Tool - CJD3BG - Coupler - Closed Center CJD3BG Yes - 3/4-16 SAE CLOSED 1

LP6-09 00825 6 Ton Hydraulic Crimping Tool - CJD30 - No Coupler - Open Center CJD30 No OPEN 1

LP6-10 00826 6 Ton Hydraulic Crimping Tool - CJD30 - No Coupler - Closed Center CJD30 No CLOSED 1

LP6-11 00833 6 Ton Hydraulic Crimping Tool - CJD30 - Coupler - Open Center CJD30 Yes - 3/4-16 SAE OPEN 1

LP6-12 00834 6 Ton Hydraulic Crimping Tool - CJD30 - Coupler - Closed Center CJD30 Yes - 3/4-16 SAE CLOSED 1

LP6-13 00836 6 Ton Hydraulic Crimping Tool - CJD3 - No Coupler - Open Center CJD3 No OPEN 1

LP6-14 00837 6 Ton Hydraulic Crimping Tool - CJD3 - No Coupler - Closed Center CJD3 No CLOSED 1

LP6-15 00839 6 Ton Hydraulic Crimping Tool - CJD3 - Coupler - Open Center CJD3 Yes - 3/4-16 SAE OPEN 1

LP6-16 00840 6 Ton Hydraulic Crimping Tool - CJD3 - Coupler - Closed Center CJD3 Yes - 3/4-16 SAE CLOSED 1

LP6-17 00841 6 Ton Hydraulic Crimping Tool - CJK - No Coupler - Open Center CJK No OPEN 1

LP6-18 00842 6 Ton Hydraulic Crimping Tool - CJK - No Coupler - Closed Center CJK No CLOSED 1

LP6-19 00847 6 Ton Hydraulic Crimping Tool - CJK - Coupler - Open Center CJK Yes - 3/4-16 SAE OPEN 1

LP6-20 00848 6 Ton Hydraulic Crimping Tool - CJK - Coupler - Closed Center CJK Yes - 3/4-16 SAE CLOSED 1

CJD3 03242 Crimping Jaw with single D die groove CJD3 N/A N/A 1

CJD3BG 84515 Crimping Jaw Unit - D and BG die grooves CJD3BG N/A N/A 1

CJD3O 87514 Crimping Jaw Unit - D and O die grooves CJD3O N/A N/A 1

CJK 04829 Crimping Jaw Unit for Kearney "O" dies CJK N/A N/A 1

CJ22 84511 Crimping Jaw for use with KC22 & KA22 crimping dies CJ22 N/A N/A 1

CJB 84513 Cutting Jaw for one-time disposable lock hasps CJB N/A N/A 1

CJXPJ 84512 Crimping Jaw with Nicopress X, P, & J die grooves CJXPJ N/A N/A 1

CP1 22041 Tool Pouch N/A N/A N/A 1

F020735 43136 Kearney "D" crimping die (adapts jaws to use "W" & "X" dies) F020735 N/A N/A 1

KD6-27 10182 "W" style cutter dies for ACSR to 4/0 AWG KD6-27 N/A N/A 1

54923 54923 HTMA Male Coupler - 3/4 - 16SAE O-Ring external thread N/A N/A N/A 1

54925 54925 HTMA Female Coupler - 3/4 - 16SAE O-Ring external thread N/A N/A N/A 1

= Replacement paRt = accessoRy

CP1Don’t forget the tool pouch!