AN AXALTA COATING SYSTEMS BRAND

LOW VOC PRODUCT SYSTEMVALUE IN EVERY DROP

1

INTRODUCING CHALLENGER LOW VOC COLOR TOOLS

Challenger offers a Low VOC product line from Axalta Coating Systems that delivers a quality finish at a price that will keep you competitive.

COLLISION–QUALITY COLOR MATCH | COMPACT PRODUCT SYSTEM | EASY TO APPLY

COLOR CHOICE® SOFTWAREColor Choice provides an extensive library of 50,000+ color formulas with monthly updates for new and updated colors.

PROFESSIONAL COLOR SELECTORSprayed fan decks chromatically organized make it quick and easy to find color within color families.

Part number: M-6691

FIND COLOR

INTRODUCING CHALLENGER®

2

COLOR MOVEMENT CHART Color movement charts provide visual tips on how to use toners to move color in the right direction, if necessary.

Part number: E-R6029

ACQUIRE™ RX SPECTROPHOTOMETERWhen paired with Color Choice, Acquire RX reads color and finds the most accurate color formula.

MATCH COLOR

3

DTM PRIMERThis chromate-free, non-isocyanate, direct-to-metal primer provides excellent corrosion protection and optimum adhesion on OEM substrate and bare metals. Meets 2.1 lbs/gal VOC requirements.

VOC: 2.1 lbs/gal

PRIMER SURFACERA 2.1 lbs/gal VOC high-build, 2K primer surfacer for automotive refinishing and new bodywork. Designed to provide an excellent substrate for all refinishing with excellent gloss holdout.

VOC: 2.1 lbs/gal

SEALERA 2.1 lbs/gal VOC urethane sealer that applies smoothly and maintains superior color and gloss retention designed to increase inter-coat adhesion.

VOC: 2.1 lbs/gal

CH2040 Primer Surfacer

CH2060 Sealer

CH2020 DTM Primer

Gallon

Gallon

Gallon

4 : 1 : 1

5 : 1 : 1

3 : 1 : 1

CH0015 Fast HardenerCH0020 Medium Hardener

CH0015 Fast HardenerCH0020 Medium Hardener

CH2022 DTM Primer Hardener

CH7000 Thinner

CH7000 Thinner

CH7000 Thinner

Quart Pint

Quart Pint

Quart

Gallon Quart

Gallon Quart

Gallon Quart

UNDERCOATS

4

LOW VOC BASECOATA new 3.5 lbs/gal VOC basecoat system designed for overall paint jobs and repairs to existing OEM two- and three-stage systems.

• Excellent coverage

• Metallics, pearls and liquid xirallics

• Quick dry time

VOC: 3.5 lbs/gal

Challenger Low VOC Basecoat

Gallon Quart Pint

1 : 1 CH7065 Reducer FastCH7075 Reducer MediumCH7085 Reducer SlowCH7095 Reducer Very Slow

Gallon Quart

BASECOAT

5

OVERALL CLEARCOATThis 2.1 lbs/gal VOC high-build clearcoat is designed to provide excellent gloss and flow characteristics, designed for complete resprays and panel repairs.

VOC: 2.1 lbs/gal

PANEL CLEARCOAT2.1 lbs/gal VOC high-build, medium-solids, universal clearcoat formulated for use with Challenger Low VOC basecoat system.

VOC: 2.1 lbs/gal

CH3040 Overall Clearcoat

CH3020 Panel Clearcoat

Gallon Quart

Gallon Quart

2 : 1

3 : 1

CH0010 Very Fast HardenerCH0015 Fast HardenerCH0020 Medium HardenerCH0025 Slow Hardener

CH0010 Very Fast HardenerCH0015 Fast HardenerCH0020 Medium HardenerCH0025 Slow Hardener

Quart Pint

Quart Pint

CLEARCOATS

6

MARKETING AND SUPPORT MATERIALS

CUSTOMER CONFIDENCE

UNDERCOATSPRODUCT COMPONENTS MIX RATIO SPRAY PRESSURE APPLICATION FLASH TIME DRY TIME

DTM Primer2.1 VOC

CH2020 DTM PrimerCH2022 DTM Primer HardenerCH7000 Thinner

4 Parts1 Part1 Part

HVLP: 6–8 PSI 2–3 Wet Coats 5–10 Minutes Between Coats

Air Dry @75°F (23°C) 1 HourBake @140°F (60°C) 20 Minutes

Primer Surfacer2.1 VOC

CH2040 Primer SurfacerHardeners (CH0015 Fast, CH0020 Medium, CH0025 Slow)CH7000 Thinner

5 Parts1 Part1 Part

HVLP: 6–8 PSI 1–3 Single Coats 5–10 Minutes Between Coats Air Dry @75°F (23°C) 1 Hour

Sealer2.1 VOC

CH2060 SealerHardeners (CH0015 Fast, CH0020 Medium, CH0025 Slow)CH7000 Thinner

3 Parts1 Part1 Part

HVLP: 6–8 PSI 1 Medium Wet Coat 15–20 Minutes Prior to Topcoating

Air Dry @77°F (25°C) To Sand 30–40 Minutes To Topcoat 20–30 Minutes

BASECOATPRODUCT COMPONENTS MIX RATIO SPRAY PRESSURE APPLICATION FLASH TIME DRY TIME

Low VOC Basecoat3.5 VOC

Challenger Low VOC BasecoatReducers (CH7065 Fast, CH7075 Medium, CH7085 Slow), CH7095 Very Slow)

1 Part1 Part

HVLP: 20–24 PSI 2–3 Single Coats 5–8 Minutes Between Coats

Air Dry @75°F (23°C)Dust Free 10 MinutesTo Clearcoat 30 Minutes

CLEARCOATSPRODUCT COMPONENTS MIX RATIO SPRAY PRESSURE APPLICATION FLASH TIME DRY TIME

Overall Clearcoat2.1 VOC

CH3040 Overall ClearcoatHardeners (CH0010 Very Fast, CH0015 Fast, CH0020 Medium, CH0025 Slow)

2 Parts1 Part

HVLP: 8–10 PSI 2 Wet Coats 10 Minutes Between Coats

Air Dry @ 77°F (25°C)Dust Free 30 MinutesTo Polish 6–8 HoursBake @140°F (60°C) 30 Minutes

Panel Clearcoat2.1 VOC

CH3020 Panel ClearcoatHardeners (CH0010 Very Fast, CH0015 Fast, CH0020 Medium, CH0025 Slow)

3 Parts1 Part

HVLP: 8–10 PSI 2 Wet Coats 10 Minutes Between Coats

Air Dry 77°F (25°C)Dust Free 30 MinutesTo Polish 4–6 HoursBake @140°F (60°C) 30 Minutes

LOW VOC PRODUCT SYSTEM

Copyright © 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. E-R6025 (03/19)

challengercoatings.usAN AXALTA COATING SYSTEMS BRAND

1. AXALTA’S UNDERTAKING1.1 This warranty agreement is between Axalta Coating Systems, LLC (ʻAxalta’) and the person whose details are set out in the warranty certificate

overleaf, being the owner or lessee or lawful possessor under any other right (ʻthe customer’) of the vehicle (ʻthe vehicle’) at the time that Challenger® Car Refinishes (ʻthe paint products’) were applied to the vehicle.

1.2 At any time during the lifetime of the customer or the person to whom this warranty has been transferred in terms of paragraph 4, as the case may be, the paint products, to any greater extent than the original paint finish on the vehicle, craze, crack, peel or lift, or lose gloss or change color (ʻthe defects’), Axalta undertakes, subject to the terms and conditions set out in this warranty agreement, to ensure that any such defect is rectified free of any charge to the customer, at a time and place and by a party reasonably determined by Axalta after consultation with the customer.

2. HOW TO CLAIM UNDER THIS LIFETIME WARRANTY2.1 If the customer becomes aware of any alleged defect in the paint products, (ʻthe alleged defect’), the customer must report it immediately to the

person/party that applied the product (ʻthe refinisher’), and must make the vehicle available for inspection at a reasonable time during normal working hours, as determined by Axalta, at the refinisher’s premises or any other place reasonably determined by Axalta.

2.2 Axalta or its agent will, at the expense of Axalta, and together with the refinisher, if Axalta deems this necessary, examine and inspect the vehicle and conduct any other investigations which Axalta deems necessary in order to determine whether the alleged defect is a defect and whether this falls within the ambit of this agreement. In particular, Axalta or its agent or the refinisher may carry out any tests on the paint work of the vehicle as Axalta may deem necessary, even if these tests may damage the paint work and the customer irrevocably authorizes Axalta, its agent and the refinisher to carry out such tests.

2.3 If for any reason the customer is not reasonably able to report the alleged defect to the refinisher who applied the paint products, then the alleged defect must immediately be reported by the customer to Axalta in writing to Axalta Coating Systems, LLC., 50 Applied Bank Boulevard, Glen Mills, PA 19342. Axalta will then nominate an alternative refinisher and paragraphs 2.1 and 2.2 will apply in respect of such refinisher.

3. WHEN THIS WARRANTY WILL NOT BE VALID3.1 This warranty will be of no force and effect and Axalta will accordingly not be under any obligation

to ensure the rectification of any alleged defect in the paint products and the customer will not have any claim of any nature whatsoever against Axalta if:

3.1.1 there is no defect, as defined, in the paint products as applied by a Axalta certified refinisher; or

3.1.2 the repaired areas on the vehicle have not been repainted entirely with paint products from the Challenger® range of automotive paint; or

3.1.3 the refinisher has not complied in all respects with:

3.1.3.1 the methods and procedures for the application of the paint products as set down by Axalta from time to time; or

3.1.3.2 the terms and conditions set out in the agreement entered into between the refinisher and Axalta in terms of which the refinisher is authorized to issue this warranty; or

3.1.4 the paint finish has not been maintained in accordance with the maintenance recommendations set out in paragraph 5 below; or

3.1.5 the customer has not:

3.1.5.1 promptly reported any alleged defect to the refinisher, or to Axalta, as the case may be, and complied in all respects with the terms and conditions of this warranty agreement; or

3.1.5.2 completed and signed the Warranty Certificate overleaf at the time of collection of the vehicle from the refinisher; or

3.1.6 the customer is unable to produce a copy of the Warranty Certificate at the time that the customer reports any alleged defect to the refinisher or Axalta, as the case may be; or

3.1.7 the alleged defect has arisen as a direct or indirect result of:

3.1.7.1 external cause, whether deliberate or accidental, such as impact or the addition of chemicals; or

3.1.7.2 the spread of rust from areas of the vehicle not painted with the paint products; or

3.1.7.3 the deterioration of paint work on areas of the vehicle other than those to which the paint products have been applied; or

3.1.8 the vehicle is no longer in roadworthy condition.

4. NON-TRANSFERABILITY4.1 This warranty is not transferable to any other person whomsoever, save for the owner or lawful

possessor of the vehicle at the time that the paint products were applied, and will cease to be of any force and effect if and when ownership or possession of the vehicle is transferred to any person other than the person who was the owner or lawful possessor of the vehicle at the time that the paint products were applied.

5. HOW TO PROTECT NEW PAINTWORK?5.1 Avoid parking in areas that are prone to Industrial fall out.

5.2 Caution must be exercised when parking under trees that emit sap and gum.

5.3 The motor vehicle should be kept clean and washed regularly using a suitable recognized branded product.

5.4 The use of strong and abrasive detergents and chemicals must be avoided at all times.E-R6020

PAINT WARRANTY

INDICATE AREA OF REPAIR

Date: _________________________________

Signature of owner/lessee:

____________________________________

CHALLENGER® EQUIPMENT ID KIT (PART# E-R6995)This Equipment ID Kit contains: (2) - 3.5"x10.875" Challenger logo decals

The decals are designed specifically for the mixing equipment in a Challenger customer’s mixing room. Simply follow the directions below for application.

For best results:• Apply Challenger decals when the air and application surface temperatures range from 50°F to 100°F.• Apply Challenger decals on the mixing machine header, cabinets or any other piece of mixing room equipment.

Hint: the decal looks best on the right side of the equipment.

AN AXALTA COATING SYSTEMS BRANDCopyright © 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. (03/19)

Prepare surface by washing with soap and water. Do not use soaps/detergents containing creams or lotions. Dry the surface with a clean, lint-free towel, then remove backing to expose the adhesive.

Apply pressure-sensitive vinyl to prepared surface, then squeegee pre-mask surface using overlapping strokes.

To expose die cut lettering, pull pre-masking away at an angle using a continuous motion. If bubbles occur, prick with a needle and smooth. Do not use a knife or razor.

1 2 3

OWNERS WARRANTY AGREEMENT

Date: _________________________________ Between _________________________________

(Name) of: (address: owner/lessee) ______________________________________________________

___________________________________________________________________________

And (refinisher’s name & address) _______________________________________________________

___________________________________________________________________________

Model: ________________________________Reg no: __________________________________

Color: ________________________________Quote: ___________________________________

Order/job no: ____________________________ Invoice no. ________________________________

Signature of refinisher: ______________________________________________________________

Date: _________________________________ Between _________________________________

(Name) of: (address: owner/lessee) ______________________________________________________

___________________________________________________________________________

And (refinisher’s name & address) _______________________________________________________

___________________________________________________________________________

Model: ________________________________Reg no: __________________________________

Color: ________________________________Quote: ___________________________________

Order/job no: ____________________________ Invoice no. ________________________________

Copyright © 2018 Axalta Coating Systems, LLC and all affiliates. All rights reserved. E-R6020

INDICATE AREA OF REPAIRREFINISHER’S FILE COPY CHALLENGER® PAINT WARRANTY

AN AXALTA COATING SYSTEMS BRAND

INDICATE AREA OF REPAIR

AN AXALTA COATING SYSTEMS BRAND

6. DISCLAIMERS/LIMITATIONS 6.1 EXCEPT AS EXPRESSLY SET FORTH HEREIN, AXALTA MAKES NO OTHER REPRESENTATION OR WARRANTY TO CUSTOMER OF ANY KIND, EXPRESS OR IMPLIED, WHETHER CREATED BY CONTRACT OR BY OPERATION OF LAW, INCLUDING ANY WARRANTIES RELATED TO USE, COMPATIBILITY, PERFORMANCE, OR ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, NON-INFRINGEMENT, AND AXALTA DISCLAIMS ALL OTHER WARRANTIES. 6.2 IN EVENT SHALL AXALTA BE LIABLE FOR ANY CONSEQUENTIAL (INCLUDING LOST PROFITS), PUNITIVE, INDIRECT, EXEMPLARY, INCIDENTAL OR OTHER SPECIAL DAMAGES ARISING FROM OR RELATING TO THIS AGREEMENT.

• E-R6024 Product Brochure

• E-R6025 Counter Mat

• E-R6026 Product Wall Chart

• E-R6027 Pocket Guide

• E-R6020 Warranty Agreement

• E-R6995 Equipment ID Kit

Product technical data sheets and Safety Data Sheets (SDS) can be viewed and downloaded from challengercoatings.us.

PAINT WARRANTYWe stand behind our products with a Paint Warranty ensuring our customers’ trust and confidence in our products.

CLEARCOATS

1.855.6.AXALTA

challengercoatings.usCopyright © 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. E-R6024 (03/19)