LR E6SF
1 Version 1.5 | 2021-04-28
Produktdatenblatt | Version 1.1 www.osram-os.com
Applications
LR E6SF
Power TOPLED® PowerTOPLED, a powerful member of the TOPLED family. Thanks to their high luminous efficacy, the LEDs are ideal for rear light clusters and indicators on vehicles and for display panels for traffic control systems.
— Interior Illumination (e.g. Ambient Map)
— Signalling
— Traffic Lights
Features: — Package: white PLCC-4 package, colorless clear silicone resin
— Chip technology: Thinfilm
— Typ. Radiation: 120° (Lambertian emitter)
— Color: λdom = 625 nm (● red)
— Corrosion Robustness Class: 1B
— Qualifications: The product qualification test plan is based on the guidelines of AEC-Q101-REV-C, Stress Test Qualification for Automotive Grade Discrete Semiconductors. — ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
LR E6SF
2 Version 1.5 | 2021-04-28
Ordering Information
Type Luminous Intensity 1) Ordering CodeIF = 50 mAIv
LR E6SF-ABCA-1-1 1400 ... 3550 mcd Q65111A0958
LR E6SF
3 Version 1.5 | 2021-04-28
Maximum RatingsParameter Symbol Values
Operating Temperature Top min. max.
-40 °C 110 °C
Storage Temperature Tstg min. max.
-40 °C 110 °C
Junction Temperature Tj max. 125 °C
Forward current TS = 25 °C
IF max. 70 mA
Surge Current t ≤ 10 µs; D = 0.005 ; TS = 25 °C
IFS max. 100 mA
Reverse voltage 2) TS = 25 °C
VR max. 12 V
ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
VESD 2 kV
LR E6SF
4 Version 1.5 | 2021-04-28
CharacteristicsIF = 50 mA; TS = 25 °C
Parameter Symbol Values
Peak Wavelength λpeak typ. 634 nm
Dominant Wavelength 3) IF = 50 mA
λdom min. typ. max.
620 nm 625 nm 630 nm
Spectral Bandwidth at 50% Irel,max ∆λ typ. 19 nm
Viewing angle at 50% IV 2φ typ. 120 °
Forward Voltage 4) IF = 50 mA
VF min. typ. max.
1.90 V 2.15 V 2.50 V
Reverse current 2) VR = 12 V
IR typ. max.
0.01 µA 10 µA
Temperature Coefficient of Peak Wavelength -10°C ≤ T ≤ 100°C
TCλpeak typ. 0.14 nm / K
Real thermal resistance junction/solderpoint 5) RthJS real typ. max.
110 K / W 130 K / W
Electrical thermal resistance junction/solderpoint 5) with efficiency ηe = 28 %
RthJS elec. typ. max.
79 K / W 94 K / W
LR E6SF
5 Version 1.5 | 2021-04-28
Brightness Groups
Group Luminous Intensity 1) Luminous Intensity. 1) Luminous Flux 6)
IF = 50 mA IF = 50 mA IF = 50 mAmin. max. typ.Iv Iv ΦV
AB 1400 mcd 1800 mcd 4800 mlm
BA 1800 mcd 2240 mcd 6060 mlm
BB 2240 mcd 2800 mcd 7560 mlm
CA 2800 mcd 3550 mcd 9530 mlm
Forward Voltage Groups
Group Forward Voltage 4) Forward Voltage 4)
IF = 50 mA IF = 50 mAmin. max.VF VF
3A 1.90 V 2.05 V
3B 2.05 V 2.20 V
4A 2.20 V 2.35 V
4B 2.35 V 2.50 V
LR E6SF
6 Version 1.5 | 2021-04-28
Group Name on Label Example: AB-1-3ABrightness Wavelength Forward Voltage
AB 1 3A
LR E6SF
7 Version 1.5 | 2021-04-28
Relative Spectral Emission 6)
Irel = f (λ); IF = 50 mA; TS = 25 °C
LR E6SF
350 400 450 500 550 600 650 700 750 800
λ /
0,0
0,2
0,4
0,6
0,8
1,0I
: Vλ
: red
Radiation Characteristics 6)
Irel = f (ϕ); TS = 25 °CLR E6SF
-100°
-90°
-80°
-70°
-60°
-50°
-40°
-30°
-20°-10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90°
ϕ /
0,0
0,2
0,4
0,6
0,8
1,0I
LR E6SF
8 Version 1.5 | 2021-04-28
Forward current 6), 7)
IF = f(VF); TS = 25 °CLR E6SF
1,6 1,8 2,0 2,2 2,4
VF / V
1
2
3
4
5
10
20
30
40
50
IF / mA
Relative Luminous Intensity 6), 7)
Iv/Iv(50 mA) = f(IF); TS = 25 °CLR E6SF
1 701 2 3 4 5 10 20 30 40 50
IF / mA
0,01
0,05
0,1
0,5
1
IVIV(50mA)
LR E6SF
9 Version 1.5 | 2021-04-28
Forward Voltage 6)
ΔVF = VF - VF(25 °C) = f(Tj); IF = 50 mALR E6SF
-40 -20 0 20 40 60 80 100 120
Tj / °C
-0,3
-0,2
-0,1
0,0
0,1
0,2
0,3∆VF / V
Relative Luminous Intensity 6)
Iv/Iv(25 °C) = f(Tj); IF = 50 mALR E6SF
-40 -20 0 20 40 60 80 100 120
Tj / °C
0,0
0,2
0,4
0,6
0,8
1,0
1,2
1,4
1,6IvIv(25°C)
Dominant Wavelength 6)
λdom = f(Tj); IF = 50 mALR E6SF
-40 -20 0 20 40 60 80 100 120
T / °C
580
600
620
640
660
680λ / nm
LR E6SF
10 Version 1.5 | 2021-04-28
Max. Permissible Forward CurrentIF = f(T)
0 20 40 60 80 100
T / °C
0
10
20
30
40
50
60
70
80IF / mA
: Ts
Permissible Pulse Handling CapabilityIF = f(tp); D: Duty cycle
10-6 10-5 10-4 10-3 0,01 0,1 1 10
/
80
100
120
IF / mA
TS = 0°C ... 108°CLR E6SF
: D = 1.0: D = 0.5: D = 0.2: D = 0.1: D = 0.05: D = 0.02: D = 0.01: D = 0.005
Permissible Pulse Handling CapabilityIF = f(tp); D: Duty cycle
10-6 10-5 10-4 10-3 0,01 0,1 1 10
/
60
80
100
120IF / mA
TS = 110°CLR E6SF
: D = 1.0: D = 0.5: D = 0.2: D = 0.1: D = 0.05: D = 0.02: D = 0.01: D = 0.005
LR E6SF
11 Version 1.5 | 2021-04-28
Dimensional Drawing 8)
GPLY6084
0.7 (0.028)0.9 (0.035)
1.7 (0.067)
2.1 (0.083)
0.12 (0.005)0.18 (0.007)
0.5
(0.0
20)
1.1
(0.0
43)
3.3
(0.1
30)
3.7
(0.1
46)
0.4 (0.016)0.6 (0.024)
2.6 (0.102)3.0 (0.118)
2.1 (0.083)
2.3 (0.091)
Package marking
3.0
(0.1
18)
3.4
(0.1
34)
(2.4
) (0.
095)
0.1 (0.004) (typ.)
4˚±1
0.6 (0.024)
0.8 (0.031)
A A
CA A C
A A
Further Information:
Approximate Weight: 30.0 mg
Package marking: Cathode
Corrosion test: Class: 1B Test condition: 25°C / 75 % RH / 200ppb SO2, 200ppb NO2, 10ppb H2S, 10ppb Cl2 / 21 days (EN 60068-2-60 (Method 4))
LR E6SF
12 Version 1.5 | 2021-04-28
Recommended Solder Pad 8)
OHLPY440
Padgeometrie fürverbesserte Wärmeableitung
improved heat dissipationPaddesign for
LötstoplackSolder resist
0.8 (0.031)
3.7
(0.1
46)
1.1
(0.0
43)
2.3 (0.091)
3.3 (0.130)
1.5
(0.0
59)
11.1
(0.4
37)
Cu Fläche / 16 mm per pad2
Cu-area_<
3.3 (0.130)
Kathode/Cathode
Anode
0.7 (0.028)
Fläche darf bei Verwendung von TOPLED®
For TOPLED® assembly do not use
elektrisch nicht beschaltet werden.
this area for electrical contact
Fläche darf bei Verwendung von TOPLED®
For TOPLED® assembly do not use
elektrisch nicht beschaltet werden.
this area for electrical contact
For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning.
LR E6SF
13 Version 1.5 | 2021-04-28
Reflow Soldering ProfileProduct complies to MSL Level 2 acc. to JEDEC J-STD-020E
00
s
OHA04525
50
100
150
200
250
300
50 100 150 200 250 300t
T
˚C
St
t
Pt
Tp240 ˚C
217 ˚C
245 ˚C
25 ˚C
L
Profile Feature Symbol Pb-Free (SnAgCu) Assembly UnitMinimum Recommendation Maximum
Ramp-up rate to preheat*)
25 °C to 150 °C2 3 K/s
Time tSTSmin to TSmax
tS 60 100 120 s
Ramp-up rate to peak*)
TSmax to TP
2 3 K/s
Liquidus temperature TL 217 °C
Time above liquidus temperature tL 80 100 s
Peak temperature TP 245 260 °C
Time within 5 °C of the specified peaktemperature TP - 5 K
tP 10 20 30 s
Ramp-down rate*TP to 100 °C
3 6 K/s
Time25 °C to TP
480 s
All temperatures refer to the center of the package, measured on the top of the component* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
LR E6SF
14 Version 1.5 | 2021-04-28
Taping 8)
OHAY06674 (0.157)
2.9 (0.114)
1.5 (0.059) 4 (0.157)
3.6
(0.1
42)
3.5
(0.1
38)
2 (0.079)
1.75
(0.0
69)
8 (0
.315
)
Cathode/Collector Marking
LR E6SF
15 Version 1.5 | 2021-04-28
Tape and Reel 9)
Reel DimensionsA W Nmin W1 W2 max Pieces per PU
180 mm 8 + 0.3 / - 0.1 mm 60 mm 8.4 + 2 mm 14.4 mm 2000
330 mm 8 + 0.3 / - 0.1 mm 60 mm 8.4 + 2 mm 14.4 mm 8000
LR E6SF
16 Version 1.5 | 2021-04-28
Barcode-Product-Label (BPL)
Dry Packing Process and Materials 8)
OHA00539
OSRAM
Moisture-sensitive label or print
Barcode label
Desiccant
Humidity indicator
Barcode label
OSRAM
Please check the HIC immidiately afterbag opening.
Discard if circles overrun.Avoid metal contact.
WET
Do not eat.
Comparatorcheck dot
parts still adequately dry.
examine units, if necessary
examine units, if necessary
5%
15%
10%bake units
bake units
If wet,
change desiccant
If wet,
Humidity IndicatorMIL-I-8835
If wet,
Mois
ture
Level 3
Flo
or tim
e 168 H
ours
Mois
ture
Level 6
Flo
or tim
e 6
Hours
a) H
umid
ity In
dicato
r C
ard is
> 1
0% w
hen read a
t 23 ˚
C ±
5 ˚C
, or
reflo
w, v
apor-phase r
eflow
, or equiv
alent p
rocessin
g (peak p
ackage
2. Afte
r th
is b
ag is o
pened, devic
es that w
ill b
e subje
cted to
infrare
d
1. Shelf
life in
seale
d bag: 2
4 month
s at <
40 ˚
C a
nd < 9
0% rela
tive h
umid
ity (R
H).
Mois
ture
Level 5
a
at facto
ry c
onditions o
f
(if b
lank, s
eal date
is id
entical w
ith d
ate c
ode).
a) M
ounted w
ithin
b) S
tore
d at
body tem
p.
3. Devic
es require
bakin
g, befo
re m
ounting, i
f:
Bag s
eal date
Mois
ture
Level 1
Mois
ture
Level 2
Mois
ture
Level 2
a4. If b
aking is
require
d,
b) 2a o
r 2b is
not m
et.
Date
and ti
me o
pened:
refe
rence IP
C/J
ED
EC
J-S
TD
-033 fo
r bake p
rocedure
.
Flo
or tim
e see b
elow
If bla
nk, see b
ar code la
bel
Flo
or tim
e > 1
Year
Flo
or tim
e 1
Year
Flo
or tim
e 4
Weeks10%
RH
.
_<
Mois
ture
Level 4
Mois
ture
Level 5
˚C).
OPTO
SEM
ICO
NDUCTORS
MO
ISTURE S
ENSITIV
E
This b
ag conta
ins
CAUTION
Flo
or tim
e 72 H
ours
Flo
or tim
e 48 H
ours
Flo
or tim
e 24 H
ours
30 ˚C
/60%
RH
.
_<
LE
VE
L
If bla
nk, see
bar code la
bel
Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card according JEDEC-STD-033.
LR E6SF
17 Version 1.5 | 2021-04-28
Chip Technology: 5: HOP 2000 B: HOP 2000 C: ATON D: Low cost ThinGaN/ Thinfilm (e.g. 6mil) F: Thinfilm InGaAlP G: ThinGaN(Thinfilm InGaN) (Subcon:Sapphire)
´ Encapsulant Type / Lens Properties 7: Colorless clear or white volume conversion
(resin encapsulation) S: Silicone (with or without diffuser) 3: lens 30° … 70° 5: lens 40° .. 80°
Wavelength Emission Color Color coordinates according (λdom typ.) CIE 1931/Emission color: A: 617 nm amber W: white S: 633 nm super red UW: ultra white T: 528 nm true green CW: warm white Y: 587 nm yellow CB: color on demand blue O: 606 nm orange CR: crystal pink CP/P: 560 nm pure green R: 625 nm red B: 470 nm blue
L: Light emitting diode
Package Type E: PowerTOPLED
Lead / Package Properties 6: folded leads T: folded leads, improved corrosion stability
(Au-LF), w/o TiO2 jetting
Type Designation System
L A E 6 7 6
LR E6SF
18 Version 1.5 | 2021-04-28
NotesThe evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet fall into the class exempt group (exposure time 10000 s). Under real circumstances (for expo-sure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irrita-tion, annoyance, visual impairment, and even accidents, depending on the situation.
Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. There-fore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810.
For further application related information please visit www.osram-os.com/appnotes
LR E6SF
19 Version 1.5 | 2021-04-28
Disclaimer
Attention please!The information describes the type of component and shall not be considered as assured characteristics.Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances.For information on the types in question please contact our Sales Organization.If printed or downloaded, please find the latest version on the OSRAM OS website.
PackingPlease use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.
Product and functional safety devices/applications or medical devices/applicationsOSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices.OSRAM OS products are not qualified at module and system level for such application.
In case buyer – or customer supplied by buyer – considers using OSRAM OS components in product safety devices/applications or medical devices/applications, buyer and/or customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and buyer and /or customer will analyze and coordi-nate the customer-specific request between OSRAM OS and buyer and/or customer.
LR E6SF
20 Version 1.5 | 2021-04-28
Glossary1) Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internal
reproducibility of ±8 % and an expanded uncertainty of ±11 % (acc. to GUM with a coverage factor of k = 3).
2) Reverse Operation: This product is intended to be operated applying a forward current within the specified range. Applying any continuous reverse bias or forward bias below the voltage range of light emission shall be avoided because it may cause migration which can change the electro-optical char-acteristics or damage the LED.
3) Wavelength: The wavelength is measured at a current pulse of typically 25 ms, with an internal repro-ducibility of ±0.5 nm and an expanded uncertainty of ±1 nm (acc. to GUM with a coverage factor of k = 3).
4) Forward Voltage: The forward voltage is measured during a current pulse of typically 8 ms, with an internal reproducibility of ±0.05 V and an expanded uncertainty of ±0.1 V (acc. to GUM with a coverage factor of k = 3).
5) Thermal Resistance: Rth max is based on statistic values (6σ).6) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-
es, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could dif-fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.
7) Characteristic curve: In the range where the line of the graph is broken, you must expect higher differ-ences between single devices within one packing unit.
8) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm.
9) Tape and Reel: All dimensions and tolerances are specified acc. IEC 60286-3 and specified in mm.
LR E6SF
21 Version 1.5 | 2021-04-28
Revision HistoryVersion Date Change
1.4 2021-02-11 Features Schematic Transportation Box Dimensions of Transportation Box Glossary
1.5 2021-04-28 Features
LR E6SF
22 Version 1.5 | 2021-04-28
Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.