beka
led
lume-midi
ElEctrical
Switching/dimming control
Downward facing daylight switch
Pre-programmable stand-alone dimming
OWLET remote management
Surge protection 20kA
correlated colour temperature Warm white (3000K)
MEchanical
Mounting Levelling spigot adaptor
Ø42mm spigots
Ø60mm spigots
Ø60mm bottom entry pole
Ø76mm bottom entry pole
ProtectorPolycarbonate (IK 10)
Glass (IK 08)
anti-theft
Vandal-resistant version, preventing unauthorised access to the luminaire by means of a special coded access screw
Theft-proof version, preventing removal of the luminaire on a Ø42mm spigot (this requires a pre-drilled spigot)
Jig for drilling Ø42mm pole spigot to make it suitable for theft-proof version
Tool to open access screw for vandal-resistant and theft-proof version
colourPearl Light Grey (RAL 9022)
Other RAL colours available on request
PhOtOMEtricS
Optics
5068 5102 5118 5138
5091 5103 5119 5139
5094 5112 5136 5140
5098 5117 5137 5141
OPTIONS AND ACCESSORIES
Designed and manufactured by BEKA Schréder (Pty) Ltd - South AfricaManufacturers of luminaires and Glass Fibre Poles08/15
BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa T: +27 11 238 0000 | F: +27 11 238 [email protected] | www.beka-schreder.co.za
ORDERING DATA
DEScriPtiOn lEDS cUrrEnt (ma) lUMEn MaSS (KG)
BEKA LEDlume-midi 26W 24 350 3 552 6.9
BEKA LEDlume-midi 38W 24 500 4 800 6.9
BEKA LEDlume-midi 55W 24 700 6 192 6.9
BEKA LEDlume-midi 36W 32 350 4 736 7
BEKA LEDlume-midi 52W 32 500 6 400 7
BEKA LEDlume-midi 75W 32 700 8 256 7
BEKA LEDlume-midi 52W 48 350 7 104 7
BEKA LEDlume-midi 76W 48 500 9 600 7
BEKA LEDlume-midi 108W 48 700 12 884 7
BEKA LEDlume-midi 69W 64 350 9 472 7
BEKA LEDlume-midi 101W 64 500 12 800 7
BEKA LEDlume-midi 144W 64 700 16 512 7
Standard optic: 5102 – major road Standard finish: Unpainted aluminium
• Unsurpassed light uniformity
• Designed to replace conventional HID and CFL streetlight
luminaires
• Marine grade, high-pressure die-cast aluminium housing
• No ingress of dust and moisture into the LED and controller
compartment - IP 66
• Three-compartment housing, ensures reliable ingress protection
• Automatic disconnection of power when opened
• Surge protection 10kV/10kA
CONSTRUCTION DETAILSThe luminaire consists of an LED engine, power supply and spigot
compartment. This allows the easy installation of the LED engine
by means of a hinging action onto a spigot base casting, with
incorporated leveling device. It is secured by stainless steel latches
and an access screw. The LED engine, consisting of the LED light
source and the power supply, can be easily replaced or upgraded
(FutureProof ).
Both compartments are rated IP 66.
Electronic temperature monitoring prevents overheating of LEDs
and power supply, positioned directly next to LEDs (ThermiX®).
The power supply is automatically disengaged when opening the
luminaire. The luminaire housing is manufactured of marine grade
aluminium. It is designed for LED light sources between 26W and
144W.
OPTIONS• Downward facing daylight switch
• Adjustment knuckles enable correct alignments on existing
side- or bottom entry spigots
• Surge protection up to 20kV/20kA
• Pre-programmable stand-alone dimming
• Vandal resistant, polycarbonate protector (IK 10)
• Glass (IK 08)
• Anti-theft protection
• Owlet nightshift Telemanagement module
DIMENSIONS IN MM
CHARACTERISTICS – LUMINAIREOptical compartment tightness level: IP 66 (*)
Control gear tightness level: IP 66 (*)
Impact resistance (glass): IK 07 (**)
Nominal voltage: 185-265V - 50Hz
Electrical class: I or II (**)
Weight (total): 7kg
Correlated colour temperature (CCT): Neutral white light
(4000K, CRI ≥70)
Materials: Body: Marine grade aluminium
(EN 1706 AC-44300)
Protector: High-impact clear
glass or polycarbonate
Installation height: 4-10m
Aerodynamic resistance (CxS): 0.03m2
Standard finish: Unpainted aluminium
(*) according to SANS 60598
(**) according to SANS 62262
APPLICATIONS• Designed for lighting of Group A3, A4 and Group B roads
• Perimeter lighting
• Suitable for solar-powered applications in the 12V/24V
version
• Outdoor lighting in eco-friendly applications
KEY ADVANTAGES• Designed and manufactured in South Africa
• Designed to operate LED light sources of up to 144W in an
ambient temperature environment of up to 35˚C, without
reducing the useful lifetime of 60 000 hours, at a lumen
depreciation of not more than 20% (L80)
• Slim, aesthetical design optimised for LED characteristics
• Provides energy savings of up to 70%
• Easy to install
• No lamp or component replacements for more than 10 years
• Designed for easy technology upgrade (FutureProof)
• Interchangeable within the BEKA LEDlume product range
BEKA LEDlume
-midi
PHOTOMETRY
OVERVIEW Lifetime residual flux @ tq 25˚C (**)
Number of LEDs Neutral white (4000K) 24 LEDs 32 LEDs 48 LEDs 64 LEDs @60.000h @100.000h
Current: 350mA Nominal flux (lm)* 3552 4736 7104 9472
90% 70%
Power consumption (W) 26 36 52 69
Current: 500mANominal flux (lm)* 4800 6400 9600 12800
Power consumption (W) 38 52 76 101
Current: 700mANominal flux (lm)* 6192 8256 12884 16512
Power consumption (W) 55 75 108 144
(*) The nominal flux is an indicative LED flux @ tj 25°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental
conditions (e.g. temperature and pollution) and the optical efficiency of luminaire. The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology(**) In accordance with LM-80 – TM-21
Electronic data files can be downloaded from www.beka-schreder.co.za/knowledge-base
APPLICATIONSThe BEKA LEDlume-midi luminaire was specifically developed for the functional lighting of Group A and B roads, where
energy saving, low maintenance and precise light control considerations are important factors. The flexibility of the
LensoFlex® photometric engine allows for multiple light distributions to ensure that the specific requirements of each
application are met. Furthermore, the options for varying the number of LEDs allows for a precise adaptation of the
nominal power of the luminaire according to the area that is to be lit.
678
ø4277
34
Aerodynamic resistance: 0.03m2
313
SA Pat. 2012/07685
Residential streets
50˚
60˚
80˚
90˚
40˚
10˚ 0˚0˚/180˚ 90˚/270˚
cd/klm200 100300400500
70˚
30˚20˚
180°
90°
0°
270°
180°
90°
0°
270°
50˚
60˚
80˚
90˚
40˚
10˚ 0˚0˚/180˚ 90˚/270˚
cd/klm200 100300400500
70˚
30˚20˚
Urban road
180° 0°
270°
60˚
90˚
0˚0˚/180˚ 90˚/270˚
cd/klm
30˚
120240360480600
90°
50˚
80˚
40˚
10˚
70˚
20˚
Medium area
15˚/165˚ 15˚/165˚15˚/165˚
• Unsurpassed light uniformity
• Designed to replace conventional HID and CFL streetlight
luminaires
• Marine grade, high-pressure die-cast aluminium housing
• No ingress of dust and moisture into the LED and controller
compartment - IP 66
• Three-compartment housing, ensures reliable ingress protection
• Automatic disconnection of power when opened
• Surge protection 10kV/10kA
CONSTRUCTION DETAILSThe luminaire consists of an LED engine, power supply and spigot
compartment. This allows the easy installation of the LED engine
by means of a hinging action onto a spigot base casting, with
incorporated leveling device. It is secured by stainless steel latches
and an access screw. The LED engine, consisting of the LED light
source and the power supply, can be easily replaced or upgraded
(FutureProof ).
Both compartments are rated IP 66.
Electronic temperature monitoring prevents overheating of LEDs
and power supply, positioned directly next to LEDs (ThermiX®).
The power supply is automatically disengaged when opening the
luminaire. The luminaire housing is manufactured of marine grade
aluminium. It is designed for LED light sources between 26W and
144W.
OPTIONS• Downward facing daylight switch
• Adjustment knuckles enable correct alignments on existing
side- or bottom entry spigots
• Surge protection up to 20kV/20kA
• Pre-programmable stand-alone dimming
• Vandal resistant, polycarbonate protector (IK 10)
• Glass (IK 08)
• Anti-theft protection
• Owlet nightshift Telemanagement module
DIMENSIONS IN MM
CHARACTERISTICS – LUMINAIREOptical compartment tightness level: IP 66 (*)
Control gear tightness level: IP 66 (*)
Impact resistance (glass): IK 07 (**)
Nominal voltage: 185-265V - 50Hz
Electrical class: I or II (**)
Weight (total): 7kg
Correlated colour temperature (CCT): Neutral white light
(4000K, CRI ≥70)
Materials: Body: Marine grade aluminium
(EN 1706 AC-44300)
Protector: High-impact clear
glass or polycarbonate
Installation height: 4-10m
Aerodynamic resistance (CxS): 0.03m2
Standard finish: Unpainted aluminium
(*) according to SANS 60598
(**) according to SANS 62262
APPLICATIONS• Designed for lighting of Group A3, A4 and Group B roads
• Perimeter lighting
• Suitable for solar-powered applications in the 12V/24V
version
• Outdoor lighting in eco-friendly applications
KEY ADVANTAGES• Designed and manufactured in South Africa
• Designed to operate LED light sources of up to 144W in an
ambient temperature environment of up to 35˚C, without
reducing the useful lifetime of 60 000 hours, at a lumen
depreciation of not more than 20% (L80)
• Slim, aesthetical design optimised for LED characteristics
• Provides energy savings of up to 70%
• Easy to install
• No lamp or component replacements for more than 10 years
• Designed for easy technology upgrade (FutureProof)
• Interchangeable within the BEKA LEDlume product range
BEKA LEDlume
-midi
PHOTOMETRY
OVERVIEW Lifetime residual flux @ tq 25˚C (**)
Number of LEDs Neutral white (4000K) 24 LEDs 32 LEDs 48 LEDs 64 LEDs @60.000h @100.000h
Current: 350mA Nominal flux (lm)* 3552 4736 7104 9472
90% 70%
Power consumption (W) 26 36 52 69
Current: 500mANominal flux (lm)* 4800 6400 9600 12800
Power consumption (W) 38 52 76 101
Current: 700mANominal flux (lm)* 6192 8256 12884 16512
Power consumption (W) 55 75 108 144
(*) The nominal flux is an indicative LED flux @ tj 25°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental
conditions (e.g. temperature and pollution) and the optical efficiency of luminaire. The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology(**) In accordance with LM-80 – TM-21
Electronic data files can be downloaded from www.beka-schreder.co.za/knowledge-base
APPLICATIONSThe BEKA LEDlume-midi luminaire was specifically developed for the functional lighting of Group A and B roads, where
energy saving, low maintenance and precise light control considerations are important factors. The flexibility of the
LensoFlex® photometric engine allows for multiple light distributions to ensure that the specific requirements of each
application are met. Furthermore, the options for varying the number of LEDs allows for a precise adaptation of the
nominal power of the luminaire according to the area that is to be lit.
678
ø4277
34
Aerodynamic resistance: 0.03m2
313
SA Pat. 2012/07685
Residential streets
50˚
60˚
80˚
90˚
40˚
10˚ 0˚0˚/180˚ 90˚/270˚
cd/klm200 100300400500
70˚
30˚20˚
180°
90°
0°
270°
180°
90°
0°
270°
50˚
60˚
80˚
90˚
40˚
10˚ 0˚0˚/180˚ 90˚/270˚
cd/klm200 100300400500
70˚
30˚20˚
Urban road
180° 0°
270°
60˚
90˚
0˚0˚/180˚ 90˚/270˚
cd/klm
30˚
120240360480600
90°
50˚
80˚
40˚
10˚
70˚
20˚
Medium area
15˚/165˚ 15˚/165˚15˚/165˚
beka
led
lume-midi
ElEctrical
Switching/dimming control
Downward facing daylight switch
Pre-programmable stand-alone dimming
OWLET remote management
Surge protection 20kA
correlated colour temperature Warm white (3000K)
MEchanical
Mounting Levelling spigot adaptor
Ø42mm spigots
Ø60mm spigots
Ø60mm bottom entry pole
Ø76mm bottom entry pole
ProtectorPolycarbonate (IK 10)
Glass (IK 08)
anti-theft
Vandal-resistant version, preventing unauthorised access to the luminaire by means of a special coded access screw
Theft-proof version, preventing removal of the luminaire on a Ø42mm spigot (this requires a pre-drilled spigot)
Jig for drilling Ø42mm pole spigot to make it suitable for theft-proof version
Tool to open access screw for vandal-resistant and theft-proof version
colourPearl Light Grey (RAL 9022)
Other RAL colours available on request
PhOtOMEtricS
Optics
5068 5102 5118 5138
5091 5103 5119 5139
5094 5112 5136 5140
5098 5117 5137 5141
OPTIONS AND ACCESSORIES
Designed and manufactured by BEKA Schréder (Pty) Ltd - South AfricaManufacturers of luminaires and Glass Fibre Poles08/15
BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa T: +27 11 238 0000 | F: +27 11 238 [email protected] | www.beka-schreder.co.za
ORDERING DATA
DEScriPtiOn lEDS cUrrEnt (ma) lUMEn MaSS (KG)
BEKA LEDlume-midi 26W 24 350 3 552 6.9
BEKA LEDlume-midi 38W 24 500 4 800 6.9
BEKA LEDlume-midi 55W 24 700 6 192 6.9
BEKA LEDlume-midi 36W 32 350 4 736 7
BEKA LEDlume-midi 52W 32 500 6 400 7
BEKA LEDlume-midi 75W 32 700 8 256 7
BEKA LEDlume-midi 52W 48 350 7 104 7
BEKA LEDlume-midi 76W 48 500 9 600 7
BEKA LEDlume-midi 108W 48 700 12 884 7
BEKA LEDlume-midi 69W 64 350 9 472 7
BEKA LEDlume-midi 101W 64 500 12 800 7
BEKA LEDlume-midi 144W 64 700 16 512 7
Standard optic: 5102 – major road Standard finish: Unpainted aluminium