SCHULER 1,320 TON STRAIGHT SIDE DOUBLE CRANK TRANSFER PRESS, MODEL TS2-1200-6-40

HPM 730 TON HYDRAULIC INJECTION MOLDER, MODEL MLH 730-WP 120 20/1 NORDSON ELECTROSTATIC POWDER COAT AUTO PAINT SYSTEM, MODEL EXCEL 2000

Auction: Thursday July 10, 9:00 AM (ET)Inspection: Wednesday July 9, 9 AM to 4 PM

7 AdditionalPresses Up To

1,000 Ton Available

1 of 7 Molders 1 of 3

8 OverheadCranes Up To

25 Ton Available

AUCTIONS • LIQUIDATIONS • FINANCING • APPRAISALS

infinityassets.com 905.669.8893

Major Appliance Manufacturer – 1.5 Million Sq Ft – Over 2000 Lots!

Bid Live Onsite & Online Via

MABE CANADA 5781 Rue Notre-Dame Street Est,Montreal, Quebec, Canada

SCHULER TS2-1200-6-401320 Ton Straight Side DblCrank Transfer Press, s/n 73-20.9249, w/ 240”x 60” Bed,(2) Rolling Bolsters, 18”Stroke, 8” Motorized Adj., 39”Shut Height, 15 to 30 SPM,WAYNE TRAILS Transfer Units,Cushions

400+ Tons of Dies and Molds

2

This brochure is meantmerely as a guide.

Infinity Asset Solutions &Perfection Industrial Sales

make no guarantee, expressed or implied,

as to the accuracy of theinformation in this

brochure. Buyers should inspect the goods

beforehand to satisfy themselves.

SCHULER 1,320 TON TRANSFER PRESSSCHULER 1,320 TON TRANSFER PRESS

PARTIAL VIEW OF DIES 400 HP SPARE MOTOR FOR SCHULER PRESS

3

PRESS DEPARTMENT PRESS DEPARTMENT HAMILTON 1000 Ton Straight Side Press, s/n 1412, w/140”x 60” Bed, 15” Stroke, 8” Adj., 28” Shut Height(2) MINSTER S2-400-108-60 Straight Side Dbl CrankPresses, s/n 17247C, 17246C, w/ 108”x 60” Bed, 16”Stroke, 16” Adj., 32” Shut Height, 15 SPMBLISS SE2-350-84-36 Straight Side Dbl Crank Press,s/n H61531, w/ 84”x 36” Bed, 16” Stroke, 12” Adj.,24” Shut Height, 22 to 30 SPMVERSON 300 Ton S2-300-144, Straight Side DoubleCrank Press, 20" Stroke, 10" ADJ, s/n 9593, w/ 48" X144" Bed Area, 20” Stroke, 10” Adj., 23.5” Shut Height,16 SPMMINSTER S2-200-96-48 Straight Side Dbl CrankPress, s/n 21861C, w/ 96”x 48” Bed, 12” Stroke, 10”Adj., 21” Shut Height, 20 SPMMINSTER S2-200-84-48 Straight Side Dbl CrankPress, s/n 17280C, w/ 84”x 48” Bed, 12” Stroke, 10”Adj., 16” Shut Height, 30 SPMERIEZ 250’ Magnetic Slug Conveyor System, w/ (2) In-cline Discharge ChutesHEAVY DUTY Coil Storage Racks, w/ (1) 10 Section x 3Tier, (2) 8 Section x 3 Tier(5) HEAVY DUTY 60”x 20’ Die Set Up Tables(3) HEAVY DUTY 22,500 lb Die Storage RacksMOTIVATION C-20-48.5 20,000lb. x 48” Coil HookALSO Die Clamping Sets; Die Rigging Hardware

VIEW OF 2 MINSTER 400 TON & HAMILTON 1,000 TON STRAIGHT SIDE PRESSES

BLISS SE2-350-84-36 STRAIGHT SIDE DBL CRANK PRESS

MINSTER S2-200-96-48 STRAIGHT SIDE DBL CRANK PRESS MINSTER S2-200-84-48 STRAIGHT SIDE DBL CRANK PRESS

VERSON S2-300-144 STRAIGHT SIDE DBL CRANK PRESS ERIEZ 250’ MAGNETIC SLUG CONVEYOR SYSTEM

PARTIAL VIEW OF CLAMP SETS

Bid Live ONSITE or ONLINE at

CUT-TO-LENGTH LINECINCINNATI .075”x 48”x 20,000 C-T-L Line,w/ CPR 48-20 Uncoiler w/ Snubber & CoilCar, s/n 91037; HERR-VOSS 54-1.500-19-5LH Leveler, s/n 11467; SC 48-.075 EdgeTrimmer, s/n 91036; HT 48-.075 HumpTable, s/n 91033; ISS 48-.075 Shear, s/n91034, MMSU 48-.075 Run Out StackingTable & Conveyor, s/n 91035 (NOTE – maybe offered as individual components orcomplete line) STRILICH 48”x .125” Edge Trimmer, s/nJ269-010

CRANES & MATERIAL HANDLINGKONE 25 Ton x 65’ Dbl Girder OverheadBridge Crane, Pendant Control2009 MUNCK 15 Ton x 70’ Dbl Girder Over-head Bridge Crane, s/n 09-4086, w/ RadioControlHERBERT MORRIS 15 Ton x 70’ Dbl GirderOverhead Bridge Crane, s/n K6184, w/Radio ControlDOMBRICO 15 Ton x 50’ Dbl Girder Over-head Bridge Crane, s/n 1788MUNCK 10 Ton x 70’ Dbl Girder Coil HandlerOverhead Bridge Crane, s/n 1336, w/ RadioControlDOMBRICO 10 Ton x 70’ Dbl Girder OverheadBridge Crane, s/n 1790, w/ Radio ControlHERBERT MORRIS 10 Ton x 55’ Dbl GirderCoil Handler Overhead Bridge Crane, s/n6120DEMAG 5 Ton Free Standing Overhead BridgeCrane System, w/ 200’ Runway & UprightsNOTE: All Crane Span Lengths are Estimates(7) JIB CRANES, w/ Electric Hoists, up to 2Ton Cap.ALSO; Large Quantity of Vacuum Lifts,Electric and Air Hoists etc

MUNCK 15 TON X 70’ BRIDGE CRANE

KONE 25 TON X 65’ BRIDGE CRANE

MUNCK 10 TON X 70’ COIL HANDLER BRIDGE CRANE

CINCINNATI .075”X 48”X 20,000 C-T-L LINE

HERR-VOSS LEVELER

STRILICH 48”X .125” EDGE TRIMMER4

1 of 3 – 15 Ton Cranes

2009

1 of 3 – 10 Ton Cranes

5

10,000’ + HYTROL, MATHEWS, ROACH, MOODY Power Roller and Belt Conveyor; 18”, 24” and 36” (Various Lengths), Transfers, Roller Ball, Inclines,Declines, 90 & 45 Deg. Bends, Cross Overs, Catwalks, Proximity Switches, DS HANDLING Freight Elevators 5000 Pieces of DUNNAGE Including Tote Bins, Plastic Stacking Bins (various sizes), Collapsible 4 Post Racks, Wire Stacking Bins (various sizes)FASTUBE Modular Material Handling Systems, w/ Resin Coasted Steel Tubing, Conveyors, Casters, Fasteners & Accessories (over 10,000 pieces) 200+ Sections of Adjustable Pallet Racking: 35’ x 4’ Uprights, 9’ Load Beams(2) 20’ Sea Containers

PARTIAL VIEW: 10,000’ + HYTROL, MATHEWS, ROACH, MOODY POWER ROLLER AND BELT CONVEYOR

PARTIAL VIEW: 5000 PIECES OF DUNNAGE

160 SECTIONS OF ADJUSTABLE PALLET RACKING: 35’ X 4’ X 9’

PARTIAL VIEW OF ASSEMBLY AREAS & CONVEYOR SYSTEM

HEAVY DUTY COIL STORAGE RACKS MOTIVATION 20,000 LB CAP COIL HOOK

6

Bid Live ONSITE or ONLINE at

PAINT & FINISHING DEPARTMENTPAINT & FINISHING DEPARTMENT

PAINT DEPARTMENT & FINISHING(2) NORDSON EXCEL 2000 Model 2002S ElectrostaticPowder Coat Paint Booth Systems, s/n 31-094-851, 31-094-850, w/ GE FANUC Series 90-70 Control, SMART-COAT Powder Spray Control w/ (25) Programmable Guns,(2) VERSA-SPRAY Touch-Up Guns, Quick Change ColourModules & Powder Reclaim, 60”x 30” Openings, Polypropy-lene Construction, Fire Detection SystemNORDSON HORIZON 4004 Electrostatic Powder Coat PaintBooth System, s/n 81-098-825, w/ VERSA-SPRAY II PowderSpray Control w/ (17) Programmable Guns, 60”x 30” Open-ings, Polypropylene Construction, Fire Detection System(2) NORDSON Quick Change Colour Modules & PowderReclaim (EXCEL 2000 Compatible)NORDSON SURE-COAT Touch Up Booth w/ Gun, DustCollector(2) NORDSON Pneumatic Gaylord TippersEISENMANN 100’x 40’ Clean Room, w/ Pomona Air Filtra-tion/Exhaust, KOOLTRONIC Air Conditioning, Bifold TrackPanels8 Stage Wash System, Includes 3 RinsesEISENMANN Convection Bake Oven, s/n A43-029-004, w/5,000,000 BTU/Hr, 400 Deg F, Plus: Dry-Off OvenComplete Chain Conveyor System Including Approx1,000’+ of Conveyor, Drives, Hooks Etc.EISENMANN E Coat Line, Complete, Including Pumps, Con-trols, Conveyors, Heat Exchangers, Oven

NORDSON HORIZON 4004 ELECTROSTATIC POWDER COAT PAINT BOOTH SYSTEM

COMPLETE EISENMANN E COAT LINE

NORDSON SURE-COAT TOUCH UP BOOTH VACUMAX 1010P FINE MATERIAL VACUUM

NORDSONPNEUMATIC GAYLORD TIPPERS

NORDSON EXCEL 2000 MODEL 2002S ELECTROSTATIC POWDER COAT PAINT BOOTH SYSTEMS

NORDSON QUICK CHANGE COLOUR MODULES & POWDER RECLAIM

2 Available

2 Available

1 of 2

7

PAINT & FINISHING DEPARTMENTPAINT & FINISHING DEPARTMENT

CONTROLLED PYROLYSIS PRC412 4722 Dbl Door Burn-Off Oven, s/n n.a.,52”w x 100”h x 120”d, 4’x 10’ Car, Gas Fired(3) 2002 SIMONEAU Gas Fired Boilers, s/n 1059, 1058, 1057, w/ 3,348,000BTU/Hr, 100 hp, 160 MAWP PSI @ 250 deg F.VACUMAX 1010P Fine Material Vacuum, s/n 01117

Waste Water Treatment System: Oil Removal System, MEM PROTEC ReverseOsmosis System, (2) JWI JPRESS Filter Press, w/ 24”x 24” Plates, BECKARTHY-PACK Filter Press, w/ 18”x 18” PlatesBCP ROTOBLAST Shot Blast Machine, s/n 1707, w/ (4) 50 hp Shot Vanes, 60”Diameter, Dust and Shot ReclaimSCHMIDT Twin Tank Dbl Pass Shot Blast Machine, w/ (4) Shot Vanes

CONTROLLED PYROLYSIS PRC412 4722 DBL DOOR BURN-OFF OVEN

BCP ROTOBLAST SHOT BLAST

8 STAGE WASH SYSTEM HEAT EXCHANGE SYSTEM

WASTE WATER TREATMENT SYSTEM VIEW OF BECKART FILTER PRESS

SIMONEAU GAS FIRED BOILERS

3 Available

60" Diameter

2004

8

PLASTICS DEPARTMENT& SUPPORTHPM MLH 730-WP 120 20/1 730 TonHyd Inj Molder, s/n 97215, 56.5" x 55"Platen, 37.5" x 37.5" Between Tie Bars,15" Stroke, 3.5" Screw, w/ COMMAND9000 Control, Plus AEC Sprue Picker(3) CINCINNATI 700 Ton x 70 oz Hyd InjMolders, s/n 4007A21/78-32,4007A21/78-15, 4095A0I/74-2, w/ALLEN BRADLEY PANELVIEW 1000 Con-trol, 37”x 37” Between Tie Bars, NOTEs/n 74-2 33”x 33” Between Tie BarsCINCINNATI 500 Ton Hyd Inj Molder, s/n4095A0I/74-2, w/ ALLEN BRADLEYPANELMATE Control, 28”x 28” BetweenTie Bars(2) CINCINNATI 375 Ton x 32 oz Hyd InjMolders, s/n 4003A21/78-53,4003A21/78-52, w/ ALLEN BRADLEYPANELMATE Control, 26”x 26” BetweenTie BarsBERG WCS.030.03 Chiller, s/n W3015-0289ICS JSW.015 SCS Chiller, s/n 1104-5404-C01MOULDTEK 40 HP Vacuum LoaderMOULDTEK Material Vacuum Loading &Distribution System(5) ANPLAST 30’x 12’ SilosALSO; (9) GAMMAFLUX and DME HotRunners (various models); (14)STERLCO and TEMPTEK Mold TempControllers (various models); Dryer/Hop-pers; Gaylord Tippers; Blenders; Dis-charge Conveyors; etc.

QA DEPARTMENTMITUTOYO BRIGHT 1220 CMM, s/n0905712, w/ 62”x 117”x 14” Drilled &Tapped Black Granite Surface Plate,48”x 80”x 40” Work Envelope, JoystickControlMITUTOYO BN1010 CMM, s/n 880327,w/ RENISHAW PH10M Probe, 66”x 80”x14” Drilled & Tapped Black Granite Sur-face Plate, 40”x 40”x 32” Work Enve-lope, Joystick ControlROCK OF AGES 40”x 100”x 10” Drilled& Tapped Black Granite Surface PlateROCK OF AGES 43”x 51”x 8” Drilled &Tapped Black Granite Surface PlateLARGE SELECTION (11) Smaller GraniteSurface Plates(3) WILSON ROCKWELL HardnessTestersQ-FOG 600 Liter Cyclic Corrosion TesterCUSTOM 10’x 17’ Sound Test ChamberENVIROTRONICS Test Chamber

HPM 730 TON HYD INJ MOLDER, MODEL MLH 730-WP 120 20/1

CINCINNATI 500 TON HYD INJ MOLDER

MOULDTEK 40 HP VACUUM LOADER & DISTRIBUTION SYSTEM

ANPLAST 30’X 12’ SILOSICS CHILLER MODEL JSW.015 SCS

PARTIAL VIEW OF PLASTICS SUPPORT

CINCINNATI 700 TON HYD INJ MOLDER

3 Available

PROXY BIDDING: We will be happy to bid on your

behalf if you are unable to attend our auction. Please call our office at 1-866-669-8893,

or visit infinityassets.comto submit a proxy bid.

9

ALSO; Data Loggers; Microscopes; Electronic Scales; HeatStress Monitors; Surftests; Sound Level Meters; UniversalPower Analyzers; Strength Testers; Surfindicators; Amp Meters;Combustion Analyzers; Multi-Angle Spectrophotometer; Elec-trical Test Panels; Digital Micrometers, Calipers, Verniers &Height Gauges; Torque Wrenches; Dial Indicators; DepthGauges; Thread Gauges; etc.

ASSEMBLY & PACKAGINGORIENTECH Auto Dryer Drum Forming Line(5) CUSTOM ASSEMBLY LINES; Including (8) VACUMOVEVM200 Vacuum Manipulator & Jibs, Monorail Assembly Trackw/Gondolas; Pallet Mount Assembly Track; CUSTOM LargeBox Transfer Robots; (23) Power Scissor Tables; ErgonomicEmployee Platforms; Power Tools; Balancers; Bar CodeReaders & Printers; Fans; Roller and Belt Conveyors, BallTransfer Conveyors, etc(6) LABEL-AIR Label Applicators(2) SAN-FAB S89-9747 Top & Bottom Large Box Gluers, w/NORDSON 3500V Glue Applicators(2) SAN-FAB Top & Bottom Large Box TapersALSO; Transfer Conveyor; Roller & Belt Conveyor; Gravity

Conveyor; DS HANDLINGRolling Slat Elevators;Robotic Pick & PlaceHandling Machines;Overhead Assembly FeedChain Conveyor; Bar CodeReaders & Printers, etc.

MITUTOYO BRIGHT 1220 CMM

PARTIAL VIEW OF 5 PACKAGING LINES

DS HANDLING ROLLINGSLAT ELEVATORS

PARTIAL VIEW OF INSPECTION EQUIPMENT

LABEL-AIR LABEL APPLICATORS

MODULAR SOUND ROOM

Q-FOG 600 LITER CYCLIC CORROSION TESTER

ENVIROTRONICS TESTCHAMBER

2 CMM’s Available 6 Available

10

FORKLIFTS & ROLLINGSTOCKHYSTER E60XM 6000 lb. Electric Forklift,s/n F108V14142V2004 TOYOTA 7FBCU25 5000 lb. ElectricForklift, s/n 64682HYSTER E50XM 5000 lb. Electric Forklift,s/n F108V1714WHYSTER E50XL-27 5000 lb. ElectricForklift, s/n C108V12898LYALE ERCO 5000 lb. Electric Forklift, s/nA814V04381W(2) HYSTER E45XM 4500 lb. Forklifts, s/nF108V116701W, F108V116700WHYSTER E40XM 4000 lb. Electric Forklift,s/n D114V01579TTOYOTA 7FBCU15 3500 lb. Electric Fork-lift, s/n 60599(2) TOYOTA EFBEC15 3500 lb. ElectricForklifts, s/n 25648, 11887HYSTER J30XM 3000 lb. Electric Forklift,s/n C160H01608RRAYMOND EASY R45TT 4500 lb. ReachTruck, s/n EZ-B-98-104522001 RAYMOND EASY R40TTM 4000lb.Reach Truck, s/n 19956, w/ 321” MastHeightJUNGHEINRICH EEB10-112 2000 lb.Walk Type Forklift, s/n0184A20534524202(2) MULTITON SW20 2000 lb. Walk TypeForklifts, s/n 100410169, N.A. TENNANT 515SS Electric Power Scub-ber, s/n 515-5220TENNANT T5 Electric Walk Type PowerScrubber(9) 2007 TAYLOR DUNN E0-034-51Electric Tugger Trucks, s/n 179762,179761, 179760, 174185, 174184,174183, 174182, 174022, 1740212007 MOTREC E4-51 Electric TuggerTruck, s/n 152911(8) POWER PA/1000 ES Electric WalkType TuggersBATTERY HANDLING SYSTEMS HRS120 Battery Service Station, w/ 2 TonGantryCARNEY Battery Service Station, w/ 2Ton Gantry2009 RAYMOND BATT-R-EASE II 3000lb. Electric Walk Type Battery ChangerALSO: Factory Tugger Carts & Wagons;Tricycles; Pallet Trucks; Die Trucks; HandTrucks; etc.

MACHINE SHOP MATTISON 36”x 90” Hyd. SurfaceGrinder, s/n 17146, w/ (2) 36”x 45” Elec-tro-Mag Chucks, 30 hp Spl. MotorCHEVALIER FSG-1224AD Hyd. SurfaceGrinder, s/n N.A., w/ 12”x 24” Electro-Mag Chuck2002 PROTH PSGS3060AH Hyd. SurfaceGrinder, s/n 0204F-03, w/ 12”x 24”Electro-Mag Chuck

PARTIAL VIEW OF 12 FORKLIFTS

RAYMOND EASY R40TTM 4000LB. REACH TRUCK

TAYLOR DUNN E0-034-51 ELECTRIC TUGGER TRUCKS PLUS TUGGERCARTS

BATTERY HANDLING SYSTEMS HRS 120 BATTERYSERVICE STATION

RAYMOND BATT-R-EASE II 3000 LB. ELECTRIC WALKTYPE BATTERY CHANGER

TENNANT 515SS ELECTRIC POWER SCUBBER

Up To 6,000 lb

As New As 2004

1 of 2 9 Available

2 Available

1 of 2 Floor Cleaners

2007

2001

11

JONES & SHIPMAN 6”x 12” CylindricalGrinder, s/n N.A.CINCINNATI No 4 Vertical Mill, s/n4A4VN5FIRST LC185VSX 5 hp Vertical Mill, s/n6060317, w/ 9”x42” Power Feed TableMONARCH Mod. BB 20”x 72” EngineLathe, s/n N.A.HYD-MECH P-350 Cold Saw, s/n N.A.DoAll V-26 Vertical Bandsaw, s/n264087, w/ Blade Welder/GrinderCINCINNATI 90T x 10’ Press Brake, s/nN.A.CINCINNATI 1412 3/16”x 12’ SquaringShear, s/n 18808CHICAGO U-1014 Box & Pan Brake, s/n306302CANABLAST 24”x 36” Shot Blast Cabinet,s/n MS-20B1-1647, w/ Dust CollectorALSO; Mig, Tig & Arc Welders; SpotWelders; Finger Brake, PneumaticPresses; Radial Arm Saws; Chop Saws;Double End Grinders; Drill Presses;Sheet Rolls; Arbor Presses; Disc & BeltsSanders; Rotary Tables; Machinist Vises;Perishable Tooling; Angle Plates; Paral-lels; Etc.

FACTORY EQUIPMENTHENLEX DPH-02-1M-310C R45 Air Filter,Twin Cellulose Filters, sn 0605.52844(2) 2007 DURAPAC CPF 350 HD -0610-17/18, Hydraulic Compactors, Garbage /Cardboard2005 ATLAS COPCO Refrigerated AirDryer Model FD 2000 VSD, sn AIF101331(4) SICOTTE 150,000 lb Foundation Sup-ports (BRAND NEW!)Heavy Duty Adjustable Die Racks,22,500 lb CapacityBELL & GOSSETT Pump Model EP-CHW-4-4, 575V, 20 HP CapacityORION Pallet Wrap Machine2MVA Transformer, Spare Press Motors

MISCELLANEOUSSafety Mirrors, Strapping Caddies,Rolling Bins, Dumping Hoppers, Re-tractable Air Hoses, Shop Fans, 100’sof Employee Lockers, Box Tape Ma-chines, Cabinets, Eye Wash Stations,Spill Pallets, Ladders, Scales, GREEN-LEE Job Boxes, Transformers, Motors,Pumps, Hydraulic Power Packs, PalletTrucks, Dollies, Hydraulic Lift Tables,Vacuum Sheet Lifters, Tornado VacuumScales, Personnel / Order Pickup Bicy-cles & Carts, Break Room Furniture,TV’s, Toledo 2,000 lb Beam Scale, Bar-code Scanners Readers, Various ShopOffices: 10’x10’+, Power StrappingTools, Balancers, Vacuum Pumps, FireExtinguishers.

MATTISON 36”X 90” HYD. SURFACE GRINDER

FIRST LC185VSX 5 HP VERTICAL MILL

HYD-MECH P-350 COLD SAW

MILLER WELDER

PARTIAL VIEW OF TOOL STEEL

2MVA TRANSFORMER

CHEVALIER 12”X24” HYD. SURFACE GRINDER

PROTH 12”X24” HYD. SURFACE GRINDER

1 of 2 Mills

2002

MODULAR OFFICE

3 Available

TERMS OF SALEPayment: All payments must be in Cash, Certified Funds, Wire Transfers, orCompany Checks, which must be accompanied with a bank letter guaranteeingirrevocable payment to Infinity Asset Solutions Inc. Invoices up to $2,000 can bepaid by Visa, Mastercard or Interac.All Online bidders must register on Bidspotter by 5pm Monday July 9th .A 15% buyers premium will be added to all onsite purchases (18% Online).A $500 refundable security deposit is required upon onsite registration ($2,000 Online).A 25% deposit is required at time of purchase, balance due by 4pm FridayJuly 11th, 2014. NO EXCEPTIONS.All goods are sold “As Is, Where Is”, ALL SALES ARE FINAL. All subject to prior sale. Complete terms and conditions including removal procedures, are available on ourwebsite, will be posted at the auction and will be provided at the time of registration.

REMOVAL TIMES

All items by: Friday July 18th except Presses, Paint Line, Cranes: Friday August1st. Hours: Monday – Friday between 8 am – 4 pm. No items may be removedduring auction. NO EXCEPTIONS.

DIRECTIONS: Montreal Intl Airport to 5781 Rue Notre-Dame StreetEst, Montreal, Quebec, Canada, H1N2C6 (at intersection of Rue Dicksonin Mercier-Hochelaga-Maisonneuve) Approx. 28 km, 30 Mins. Follow onAutoroute 520 from Romeo-Vachon Blvd N, Follow Autoroute 20 E and 720 Eto Boul Ville Marie N in Ville-Marie, Take Rue Notre-Dame E to Rue Dickson inMercier-Hochelaga-Maisonneuve, Turn left onto Rue Dickson, Parking is onthe left (West) side of Dickson, Across the Street From the Plant.

Member In Good Standing Of:

Print

ed in

Can

ada

This brochure is meant merely as a guide. Infinity Asset Solutions and Perfection IndustrialSales make no guarantee, expressed or implied, as to the accuracy of the information in this brochure. Buyers should inspect the goods beforehand to satisfy themselves.

ALSO: Huge Quantity of Shoe Dies, Molds, Raw Material, Tool Steel, Etc, Approx 500+ Tons

KITCHEN & CAFETERIAFOSTER Commando Double Door Refrigerator, GARLAND Deep Fryer, MKE Twin Basket Fryer, MKE 36”Griddle, Deli Display Cases, Warming Tables, IFI Coolers, Heat Lamps, POS Machine, Kettle, Stainless SteelPreparation Tables, Toasters, Twin Station Panini Press, Sinks, Cookware, Trays, Pans, Pots, Racks, ECOLABPass Through Dishwasher, CLEVELAND 21CET8 Steamer, GARLAND Gas Oven, MKE 6’ Fume Hood, METROC175 Holding Oven, Tables, Chairs & More!

20’ SEA CONTAINERS

COMPLETE KITCHEN & CAFETERIA

PARTIAL VIEW OF EMPLOYEE LOCKERS

HENLEX DPH-02-1M-310C R45 AIR FILTER

DURAPAC CPF 350 HD -0610-17/18, HYDRAULIC COMPACTORS

AUCTIONS • LIQUIDATIONS • FINANCING • APPRAISALS

infinityassets.com 905.669.8893