+ All Categories
Home > Documents > Martin Logan Summit X

Martin Logan Summit X

Date post: 07-Mar-2016
Category:
Upload: dubai-audio
View: 220 times
Download: 3 times
Share this document with a friend
Description:
The Great American Speaker Company www.martinlogan.com black Ash Natural Cherry SUMMIT x—FLAwLESS ELECTROSTATIC PERFORMANCE INSPIRED by CLx FINISH OPTIONS ULTIMATE PERFORMANCE STEREO/HOME THEATER FRONT/SURROUND Application: Stereo speaker or home theater front ideal for large and medium rooms. Dark Cherry For detailed amplifier recommendations and complete specifications visit www.MartinLogan.com. ©2010 MartinLogan, Ltd. All rights reserved. ®
1
For detailed amplifier recommendations and complete specifications visit www.MartinLogan.com. ©2010 MartinLogan, Ltd. All rights reserved. Application: Stereo speaker or home theater front ideal for large and medium rooms. CLX™ inspired crossover engineering perfectly blends a high-resolution XStat™ electrostatic transducer and dual Controlled Dispersion PoweredForce™ woofers to provide an unparalleled sonic experience. Key Features: CLS™ XStat electrostatic transducer • Ultra rigid AirFrame™ Dual 200 watt Controlled Dispersion PoweredForce 10-inch aluminum cone woofers • Precision built advanced topology Vojtko™ crossover 25 & 50Hz level control • Highly adjustable ETC™ spikes The Great American Speaker Company www.martinlogan.com ® Summit X ULTIMATE PERFORMANCE STEREO/HOME THEATER FRONT/SURROUND FINISH OPTIONS SUMMIT x—FLAwLESS ELECTROSTATIC PERFORMANCE INSPIRED by CLx Inspired by CLX, Summit X is the first hybrid electrostatic speaker to bring controlled dispersion to low-frequencies. By using a precision Vojtko crossover network to apply variable phasing near the crossover point, dual woofer Controlled Dispersion PoweredForce technology provides seamless blending with MartinLogan’s controlled dispersion XStat transducer. Four modular feet allow vertical dispersion adjustment over a 12 degree range, while 25 and 50 Hz level controls fine-tune woofer output to provide deep, powerful, smooth, clean, and detailed bass throughout the listen- ing environment. Control panel and ground effects lighting provide the final touch. Frequency Response 24–23,000 Hz ± 3dB Sensitivity 91 dB/2.83 volts/meter Impedance 4 Ohms, 0.8 @ 20 kHz. Compatible with 4, 6, or 8 Ohm rated amplifiers. Crossover Frequency 270 Hz High/Mid Frequency Driver 44” x 11.3” (111.8 x 28.7 cm) CLS XStat electrostatic (497 in 2 /3,209 cm 2 ) Low Frequency Driver Two 10” (25.4 cm) 200 watt PoweredForce aluminum cone woofers Recommended Amplifier Power 20–600 watts per channel Weight 75 lbs. (34 kg) per channel Dimensions (HxWxD) 60.9” x 12.7” x 21.3” (154.8 x 32.2 x 54 cm) black Ash Natural Cherry Maple birdseye Maple Dark Cherry Rotary Cut bubinga Visit configurator.martinlogan.com to explore the full range of finish options. RESERVE ESL SERIES
Transcript
Page 1: Martin Logan Summit X

For detailed amplifier recommendations and complete specifications visit www.MartinLogan.com. ©2010 MartinLogan, Ltd. All rights reserved.

Application: Stereo speaker or home theater front ideal for large and medium rooms.

CLX™ inspired crossover engineering perfectly blends a high-resolution XStat™ electrostatic transducer and dual Controlled Dispersion PoweredForce™ woofers to provide an unparalleled sonic experience.

Key Features:

• CLS™ XStat electrostatic transducer

• Ultra rigid AirFrame™

• Dual 200 watt Controlled Dispersion PoweredForce 10-inch aluminum cone woofers

• Precision built advanced topology Vojtko™ crossover

• 25 & 50Hz level control

• Highly adjustable ETC™ spikes

The Great American Speaker Companywww.martinlogan.com

®

Summit™ XULTIMATE PERFORMANCE STEREO/HOME THEATER FRONT/SURROUND

FINISH OPTIONS

SUMMIT x—FLAwLESS ELECTROSTATIC PERFORMANCE INSPIRED by CLxInspired by CLX, Summit X is the first hybrid electrostatic speaker to bring controlled dispersion to low-frequencies. By using a precision Vojtko crossover network to apply variable phasing near the crossover point, dual woofer Controlled Dispersion PoweredForce technology provides seamless blending with MartinLogan’s controlled dispersion XStat transducer. Four modular feet allow vertical dispersion adjustment over a 12 degree range, while 25 and 50 Hz level controls fine-tune woofer output to provide deep, powerful, smooth, clean, and detailed bass throughout the listen-ing environment. Control panel and ground effects lighting provide the final touch.

Frequency Response 24–23,000 Hz ± 3dB Sensitivity 91 dB/2.83 volts/meter Impedance 4 Ohms, 0.8 @ 20 kHz. Compatible with

4, 6, or 8 Ohm rated amplifiers. Crossover Frequency 270 Hz High/Mid Frequency Driver 44” x 11.3” (111.8 x 28.7 cm) CLS XStat

electrostatic (497 in2/3,209 cm2) Low Frequency Driver Two 10” (25.4 cm) 200 watt PoweredForce

aluminum cone woofers Recommended Amplifier Power 20–600 watts per channel Weight 75 lbs. (34 kg) per channel Dimensions (HxWxD) 60.9” x 12.7” x 21.3” (154.8 x 32.2 x 54 cm)

black Ash Natural Cherry

Maple birdseye Maple

Dark Cherry

Rotary Cut bubinga

Visit configurator.martinlogan.com to explore the full range of finish options.

RESERVE ESL

SERIES

Recommended