MECATRONICS-REM 2012 9th France-Japan / 7th Europe-Asia Congress 13th International Workshop on Research and Education in Mechatronics November 21 – 23, 2012 – Supméca, Paris (France) Call for papers This is a joint 3 days event for MECATRONICS congress (France-Japan and Europe-Asia) and REM workshop, promoted by the International Network of Mechatronics Universities (www.mechatronics-net.de), JSPE (Japan Society for Precision Engineering) and IOREM (International Organization for Research and Education in Mechatronics). This event combines for the first time the two very well established events in the field of Research and Education in Mechatronics. Experts from many different countries will come together to exchange their knowledge and experience with colleagues. This event will be the basis for new networks and cooperations in R&D and in educating Mechatronics Engineers. We hope to give you an opportunity for further cooperations e.g. in students and in university teachers exchanges. Furthermore we include keynote presentations by renowned researchers from universities and from industry. The congress will be held at Supméca, Paris, France. http://lismma.supmeca.fr/mecatronics-rem2012 Important dates • Deadline for Submission of Organized Session Proposal: April 30, 2012 • Deadline for Full Paper Submission: May 30, 2012 • Notification of Acceptance: July 15, 2012 • Deadline for Submission of Final Manuscripts: September 15, 2012 Chair General Chair Dr. Jean-Yves CHOLEY, Supméca Paris, France General Co-Chair Prof. Hiroyasu KOSHIMIZU, Chukyo Univ. Japan Prof. Reiner DUDZIAK, HS Bochum, Germany Honorable Chair Prof. Fumio HARASHIMA, TMU, Japan Program Chair Prof. Thierry SORIANO, Supméca Toulon, France Program Co-Chair Prof. Toshiyuki MURAKAMI, Keio Univ, Japan Local Arrangement Chair Dr. Olivia PENAS, Supméca Paris, France
Transcript
MECATRONICS-REM 2012 9th France-Japan / 7th Europe-Asia Congress 13th International Workshop on Research and Education in Mechatronics
November 21 – 23, 2012 – Supméca, Paris (France)
Call for papers This is a joint 3 days event for MECATRONICS congress (France-Japan and Europe-Asia) and REM workshop, promoted by the International Network of Mechatronics Universities (www.mechatronics-net.de), JSPE (Japan Society for Precision Engineering) and IOREM (International Organization for Research and Education in Mechatronics).
This event combines for the first time the two very well established events in the field of Research and Education in Mechatronics.
Experts from many different countries will come together to exchange their knowledge and experience with colleagues. This event will be the basis for new networks and cooperations in R&D and in educating Mechatronics Engineers. We hope to give you an opportunity for further cooperations e.g. in students and in university teachers exchanges.
Furthermore we include keynote presentations by renowned researchers from universities and from industry.
The congress will be held at Supméca, Paris, France.
http://lismma.supmeca.fr/mecatronics-rem2012
Important dates • Deadline for Submission of Organized Session Proposal:
April 30, 2012 • Deadline for Full Paper Submission: May 30, 2012 • Notification of Acceptance: July 15, 2012 • Deadline for Submission of Final Manuscripts:
September 15, 2012
Chair
General Chair
Dr. Jean-Yves CHOLEY, Supméca Paris, France
General Co-Chair
Prof. Hiroyasu KOSHIMIZU, Chukyo Univ. Japan Prof. Reiner DUDZIAK, HS Bochum, Germany
Honorable Chair
Prof. Fumio HARASHIMA, TMU, Japan
Program Chair
Prof. Thierry SORIANO, Supméca Toulon, France
Program Co-Chair
Prof. Toshiyuki MURAKAMI, Keio Univ, Japan
Local Arrangement Chair
Dr. Olivia PENAS, Supméca Paris, France
Topics Mechatronic systems
• Actuators, sensors, components and systems • Control (motion, robots, vibration, remote) • Supervision, diagnostic, safety and reliability • Software and embedded systems • Materials for mechatronics • Co-operating systems • Robotics, parallel kinematics • Mechatronic measurement techniques • Vision systems • Sensors network, control area network • Smart materials (piezoelectricity…)
Methodologies, Tools and languages
• Mathematics for mechatronics • Preliminary design • Modelling (multiphysics, hybrid approach…) • Simulation, virtual prototyping • System engineering • Integration, Verification, Validation, Qualification • Formal Specification and Verification • Life Cycle Analysis • Sustainability for mechatronic products • Mechatronics standardisation • PLM for mechatronics Education and learning
• Initial, continued and professional education • Project based learning • Internet based learning • Mechatronics basics • New mechatronics courses • Internationalisation of study courses Industrial Applications
• Transportation industry (automotive, electromobility, aerospace, railways, drone, submarine, avionics…)
• Energy systems (wind energy, photovoltaics, fuel cell…)
• Automation (robot systems, assembly…) • Medical and bio-mechatronics (assistant systems, micro-mechatronics…)
• Consumer goods • Micro and nano-mechatronics (systems, produc-tion…)
• Haptic, human augmentative and rehabilitation equipments
• Artificial intelligence applications Fees
Committees
Organizing committee
Sid-Ali ADDOUCHE (Paris 8) Jean-Pierre BARBOT (ENSEA) Matthieu BRICOGNE (UTC) Vincent CHEUTET (Supméca) Christel COMPAGNON (Supméca) Véronique DA SILVA (Supméca) Alexis FRANCOIS (Supmeca) Lionel FRETE (Supméca) Ioana HERMAN (Supméca) Hubert KADIMA (EISTI) Antoine LECHARTIER (Supméca) Patrice LECLAIRE (Supméca) Akio NAKAMURA (TDU) Olivia PENAS (Supméca) Laurent PETIT (UTC) Régis PLATEAUX (Supméca) Thierry SORIANO (Supméca) Simon TAMAYO (Supméca)
REM steering committee Rolf BIESENBACH, Germany Finn CONRAD, Denmark Mats HANSON, Sweden Hermann HENRICHFREISE, Germany Krzysztof KLUSZCZYNSKI, Poland Martin LÖFFLER-MANG, Germany Jacques LOTTIN, France Petr NOSKIEVIC, Czech Republic Friedbert PAUTZKE, Germany Riccardo RIVA, Italy Ken ROTTER, UK Raivo SELL, Estonia Mart TAMRE, Estonia Jörg WILD, Germany Xiu-Tian YAN, UK Muharrem YILMAZ, Turkey
Mecatronics steering committee Nicolas CHAILLET, France Jean-Yves CHOLEY, France Olivier DE GABRIELLI, France Hiroshi HASHIMOTO, Japan Seiji HATA, Japan Junji HIRAI, Japan Kang-Hyun JO, Korea Hiroyasu KOSHIMIZU, Japan Georges KOTROTSIOS, Switzerland Naoyuki KUBOTA, Japan Jacques LOTTIN, France Dominique MEIZEL, France Aiguo MING, Japan Yoshio MIZUGAKI, Japan Toshiyuki MURAKAMI, Japan Roberto OBEO, Italy Christine PRELLE, France Yokio SAITO, Japan Taichi SATO, Japan Yasuo SUGA, Japan Noureddine ZERHOUNI, France
Information Website: lismma.supmeca.fr/mecatronics-rem2012 Supméca address: Institut Supérieur de Mécanique de Paris 3 rue Fernand Hainaut – 93400 Saint-Ouen France Tel. : +33 (0)1 49 45 29 20 – www.supmeca.fr Sponsored by: The Japan Society for Precision Engineering (JSPE), IOREM organization, The International Network of Mechatronics Universities Co-sponsored by: IEEE (CSS, IES), CNRS (GDR MACS), MOV’EO, THESAME, CETIM, Région Ile-de-France, MESR
