○ Operating medium – light and dark oil products (petrol, diesel oil, crude oil, etc.), aromatic hydrocarbons (benzene, xylene, etc.)
○○ The average efficiency of evaporation loss reduction is at least 98% (when operating the floating block a float).
○ Operating temperature: -10 °С to +75 °С.
○○ The immersion depth of the carrier ring, duct and other passages in the decking (liquid seals) is 15 mm.
○○ The annular clearance between the floating block carrier ring and the tank wall is 200±20mm for various tank diameters and can be changed with floating block movement within ±80mm without peripheral sealing operating trouble. trouble.
Storagetech™ MegaFloat Full Contact Internal Floating Roof is manufactured to be installed inside fixed roof storage tanks. It’s a Full Contact Floating Roof with absolutely no gap, thereby reducing emission and restricting vapor build up. The differentiating factor between MegaFloat and the other Internal Floating Roof is the space, often therethere is vapor space between the roof and the product which allows dangerous fumes to collect.
Internal Floating Roofs are considered as the most effective method for preventing emissions by international authorization. Internal Floating Roofs create a barrier on the volatile liquid stored in the tank and overcome the fuel leaks almost to the near the end. The most common of these are liquid contact pontoons and direct liquid contact panel type products. Thanks to the structure system placed on the pontoon, a vapour barrel is to be supplied by using combination of both parts. At this point, fuel loss will be minimized. However, this system is not as effective as full contact panel systems. The panels do not let vapour to accumulate in a space because of being in directly liquid contact. a space because of being in directly liquid contact.
FLOATING ROOFSEALING SYSTEMS
1
Internal Floating Roof SystemsMegaFloat Full Contact IFR
However, the panels can be unexpectedly impacted or punctured, due to some unconsidered collapse and undesired damage potential, relevant parts as a result of corrosive effects and abrasions to the internals of the pontoons (such as honeycomb) used as fillers for the liquid panels entering from where the holesholes occured. This is where ‘MegaFloat Block Panels’ come into consideration as a reasonable solution for overcoming such potential cases. As it is working combination of both pontoon and liquid panel types.
To ensure better combination, the hardened thin plates are assembled using special welding and packaging methods and block panels to be manufactured. These panels are connected to each other by support lugs and bolts, they can easily be removed and here is the product called MegaFloat Block Panel InternalInternal Floating Roof (MegaFloat IFR) with its superior strength.
2
Structural weakness, chemical attacks or deformations are not even close to affect MegaFloat IFR. MegaFloat is a product that meets all kinds of requirements and demands in one. Covering revelant international standards, providing ea. perfectly with easy mounting, long term durability, and load capacity. Due to the use of too thin metal sheets in decks utilizing in classical glue type honeycomb and other types, buckling and deformation of the structure system can cause serious maintenance stops.
Internal Floating Roof SystemsMegaFloat Full Contact IFR
MegaFloat Block Panel Seal Type
• MegaFloat is welded, ensuring there is no leakage of precious non-renewable fossil fuel and is pre-fabricated at ERGIL’s manufacturing facility in Mersin, Turkey.
• Storagetech MegaFloat IFR reduces the time taken for installation at the site, leading to the quicker execution of the project.
•• Unlike, the other Full Contact Internal Floating Roof in the market which has a short product lifespan and is non-durable as they are stuck with a chemical to sheets. MegaFloat beats its competitors in the market by being stronger, tighter and one having a longer product lifespan and sturdy enough to store all kinds of fuels.
Internal Floating Roof SystemsMegaFloat Full Contact IFR
• Easy to remove blocks directly from the certain location without affecting any other panels. Each sealing elements between the panels are independent with each other. Installation of the sealing system can easily be achieved. Additional protection barriers have been provided on the already reduced sealing areas using special flanges.
Features
Emission
Damage
Resistance
Life Expectancy
Leakage Points
Seal Type
StrenghtStrenght
Connection Style
Heat Resistance
Risk Assestment
Manufacturing Method
Sealing Material
Senstivity
Material(Internal)Material(Internal)
Good
Maximum
Less
Less
Most
Wiper / Primary
MediumMedium
Medium
Medium
High
Bonding
Silicone
Good
AAL
Good
Medium
Good
Medium
Medium
Wiper / Primary
LessLess
Hard
Weak
High
Fusing
Mertone
Less
FiberFiber
Excellent(Utilising 2ndary Seal)
Less
Best
Maximum
Minimum
Primary & SecondaryPrimary & Secondary
Strong
Easy
Strong
Low
Welding
Buna-N
BestBest
CS/SS/AL
Honeycomb Fiberglass MegaFloatBlock Pannel
..
YOU ARE ONE STEP
CLOSER TO MAKE THE
RIGHT CHOICE
We are focusing on our core business platforms to deliver highest quality critical industrial products for energy, chemical, water, marine, mining, and manufacturing markets to support our customers for rapidly changing challenges.
3 More than 30 years of experience
Process Equipment
Solutions
here to help
Emission Control &
Safety Solutions
Aager �ergir An Aager Brand 0000
Äager GmbH Germany Head Office + R&D + Sales
Herzogspitalstraße 24Munich 80331GermanyT: +49 211 4247 1137FF: +49 211 4247 1450W: www.aager.deE: [email protected]
Azerbaijan Sales + Warehouse
Ahmad Racabli 222Royal Plaza5th floor, Suite 8Baku, Azerbaijan AZ1106T: +994 (12) 564 2256EE: [email protected]
Turkey Head Office + Sales
Ağaoğlu My Office 212 No: 3 B Blok /175 P.K 34218 Güneşli – BağcılarIstanbul / TurkeyT: +90 212 485 40 07FF: +90 212 485 40 42W: www.ergil.comE: [email protected]
Turkey Factory + Engineering + R&D + Sales
Mersin Tarsus OSB.13.CD.NO:7 P.K: 33540 Mersin, TurkeyT: +90 324 676 44 04F: +90 324 676 44 03E: [email protected]
U.A.E. Sales + Warehouse
Jumeirah Lake Towers, X2 Tower 1906 P.O. Box: 123661 Dubai, U.A.E.P : +971 4 450 8051F: +971 4 450 8041E: [email protected]