+ All Categories
Home > Documents > Merchandising Systems - cnhhardware.com® Merchandising Systems Cube configuration with optional...

Merchandising Systems - cnhhardware.com® Merchandising Systems Cube configuration with optional...

Date post: 26-Apr-2018
Category:
Upload: vuongkiet
View: 223 times
Download: 5 times
Share this document with a friend
6
® Reference numbers and part weights are provided as a reference only. Actual part weight may vary from weights shown. Merchandising Systems ® Cube configuration with optional metal Peg Panel shown above. Cabinets can be configured as needed and ordered individually. Stand alone cabinets are components of CUBE HD® shown above. Available in 24 and 36 hole sizes 24-Hole Cabinet part numbers Size: 4' 10 1/8" H x 2' 2 1/4" W x 1' 3 3/4" D Holds 48 pans. Red– 2013381 Blue– 2013385 Gray– 2013383 Yellow– 2013384 Green– 2013386 36-Hole Cabinet part numbers Size: 4' 10 1/8" H x 3' 2 1/4" W x 1' 3 3/4" D Holds 72 pans. Red– 2012163 Blue– 2012166 Gray– 2012162 Green– 2014145 Yellow– 2012165 Attractive > Designed to increase traffic. Organized > Inventory labeled in easily accessible Sure-Lok ® Stop Storage Pans. Expandable > Utilize different configurations of cabinets to maximize floorspace and meet future inventory needs. Modular > Can be displayed as islands or in straight runs. Heavy Duty > Features heavy duty metal cabinets and pans. Inch part numbers Red– 2013241 Blue– 2013242 Gray– 2013243 Tan– 2013244 Yellow– 2013245 Green– 2014170 Metric part numbers Red– 2013246 Blue– 2013247 Gray– 2013248 Tan– 2013249 Yellow– 2013250 Green– 2014171 Merchandising System Cabinets Inch cube contains over 79,000 bolts, nuts, and washers. Metric cube contains over 49,000 bolts, nuts, and washers. ® is fully stocked with fasteners! 504 www.TrinityHardwareHQ.com [email protected] 1-888-232-1010 fax: (563) 441-6760 TM 20100706/issue 3/rev. a
Transcript

®

Reference numbers and part weights are provided as a reference only. Actual part weight may vary from weights shown.

Merchandising Systems ®

Cube configuration with

optional metal Peg Panel shown above.

Cabinets can be configured as needed and ordered individually.

Stand alone cabinets are components of CUBE HD® shown above. Available in 24 and 36 hole sizes

24-Hole Cabinet part numbersSize: 4' 10 1/8" H x 2' 2 1/4" W x 1' 3 3/4" D Holds 48 pans.Red– 2013381 Blue– 2013385Gray– 2013383 Yellow– 2013384 Green– 2013386

36-Hole Cabinet part numbersSize: 4' 10 1/8" H x 3' 2 1/4" W x 1' 3 3/4" DHolds 72 pans.Red– 2012163 Blue– 2012166 Gray– 2012162 Green– 2014145 Yellow– 2012165

Attractive > Designed to increase traffic. Organized > Inventory labeled in easily accessible Sure-Lok® Stop Storage Pans.Expandable > Utilize different configurations of cabinets to maximize floorspace and meet future inventory needs.Modular > Can be displayed as islands or in straight runs. Heavy Duty > Features heavy duty metal cabinets and pans.

Inch part numbersRed– 2013241 Blue– 2013242 Gray– 2013243Tan– 2013244 Yellow– 2013245 Green– 2014170Metric part numbersRed– 2013246 Blue– 2013247 Gray– 2013248Tan– 2013249 Yellow– 2013250 Green– 2014171

Merchandising System Cabinets

Inch cube contains over 79,000 bolts, nuts, and washers. Metric cube contains over 49,000 bolts, nuts, and washers.

® is fully stocked

with fasteners!

504

www.TrinityHardwareHQ.com [email protected]

1-888-232-1010fax: (563) 441-6760

TM

20100706/issue 3/rev. a

®

Reference numbers and part weights are provided as a reference only. Actual part weight may vary from weights shown.

Measure Mate® Thread Gauges

Help support your retail hardware sales with new branded bulk hardware bag dispensers. These are a great, low-cost addition to your hardware display. This dispenser holds plastic bags for bulk distribution of fasteners and is made of 18 gage steel. Bag dispenser comes in gray.

Pan dividers available:Narrow- approx. 5½ in. long) Long- (approx. 16 in. long)

Storage Pans

P Stopping feature helps prevent spillageP Improved Design for Longer Life

P Radius Curved CornersP Clear Pan Dividers Available

Mix and match Sure-Lok® Storage Pans to add some extra flair and organization to your hardware display. Please be sure to ask about pan labels when ordering. For use in the CUBE HD® Merchandising System.

Pan part numbers by color:l Yellow–– 2012436 l Blue–– 2012437l Red–– 2012438 l Orange–– 2012439l Black–– 2012441 l Tan–– 2012442 l Gray–– 2012443 l Green–– 2012440One color per box. Sold in packages of 12.

Merchandising Accessories

Rack Shelf Kit 3 1/2" Shelf Depth Steel Grey

12" W X 16" H X 18" L 18 Gauge Steel

Point of Purchase Display Unit

One Unit- Part number 2011751Set of three- Part number 2013234

Set of six- Part number 2013235

Highlight your Fastener Kits!Each unit stacks six kits/two deep.

Part Number 2010246Dimensions:7" W x 15" H x 18" L

Quantity: 1 Shipping Weight: 1 lb.

Bag refill part number2009601

Bulk Hardware Bag Dispensers

Clear plastic dividers for Sure-Lok® Storage Pans. Sold in packages of 10.

Pan Divider part numbers:

Narrow- (approx. 5¼ in. long) Part Number 2012141

Long- (approx. 16 inches long) Part Number 2013975

Pan Dividers

Measure Mate® Inch Thread Gauge Measures inch sizes from #4 to 3/4" diameter. Part number 2009255

Measure Mate®

Metric Thread Gauge Measures metric sizes from 4mm to 24mm diameter. Part number 2009256

1-888-232-1010fax: (563) 441-6760

www.TrinityHardwareHQ.com [email protected]

TM

20100706/issue 3/rev. a 505

®

Reference numbers and part weights are provided as a reference only. Actual part weight may vary from weights shown.

HELICAL SPRING LOCK WASHERSZinc Clear (continued)

The MCS-P Series comes with a large, galvanized 11" x 16" x 5" (28cm x 41cm x 13cm) scoop and chains. These economical dial scales are built for heavy use. The large 8" (20cm) dial is furnished with easy-reading black graduations and numerals on a white background, while the red knife blade pointer indicates weight fast and accurately. The dial mechanisms are protected by the plastic lens, while plastic housing eliminates dents and scratches. All hanging dial scales are available with double dial and/or temperature compensated springs.

Scoop Scales- Detecto®

Part number 2010622Scoop: Galvanized 11" x 16" x 5" with chains (28cm x 41cm x 13cm)Dial: 8" (20cm) dial, with plastic lensShipping Weight: 5 lb / 2.3 kgOverall Height: 34.5" / 88 cm(from top S-hook to bottom of pan)

Accurately measures the density of various fertilizer blends by both, Lbs. Per cubic foot and kilograms per cubic meter. Fertilizer Density measurement is extremely important in determining accurate settings of custom application equipment. The proper setting of this equipment insures that optimum yield is achieved without negative environmental impact. Portable, made of chemical-resistant ABS plastic. USDA approved. 15.5" long. Weight: 0.8875/each.

Part number 2005872

Merchandising Accessories

Fertilizer Density Scale Metric & Standard Weights

Storage BinsThese storage bins are made of plastic and come in red, blue and yellow.

Red Part number 2011988 Blue Part number 2011989Yellow Part number 2011990 Dimensions:5 1/2" W x 5" H x 14 3/4" L

Shipping Weight: 2 lbs.

Quantity: 6.

Clear Dimensions:7" W x 1 3/4" H x 10 1/2" LClear Part number 2009607

Hardware Storage "tackle box style"

Includes 12 repositionable dividers to vary compartment sizes in a clear storage container. Helps you organize your workshop so that you can find parts quickly. Up to 18 possible compartments.

Storage Pan Clip-On Label ProtectorClip-on label protector for Sure-Lok Storage Pans. Protects pan label against dirt, dust, grease, and other oils.Part Number 2021218Dimensions:1 1/8" W x 4 7/8" H Quantity: Shipping Weight: .01 lb.

506

www.TrinityHardwareHQ.com [email protected]

1-888-232-1010fax: (563) 441-6760

TM

20100706/issue 3/rev. a

®

Reference numbers and part weights are provided as a reference only. Actual part weight may vary from weights shown.

Part number 2011495

Shipping Weight: 35 lbs.

Exterior Dimensions: 14 1/4" H x 35 1/4" W x 11 7/8" D

Opening Dimensions:3 1/4" H x 4 1/8" W

Bin has a hemmed divider with a 1" lip providing a convenient location of labels and keeping parts securely in place. Heavy-duty cold rolled steel construction and durable baked gray enamel finish.

Part number 2009253

Shipping Weight: 54 lbs

Exterior Dimensions: 21 1/2" H x 35 1/4" W x 11 7/8" D

Opening Dimensions: 4" H x 4" W

This is one of our more popular models. Two units can be stacked to form an 80 compartment unit. Shipped one per carton.

Bin has a hemmed divider with a 1" lip providing a convenient location of labels and keeping parts securely in place. Heavy-duty cold rolled steel construction and durable baked gray enamel finish.

Part Number 2011493

Features: Heavy Duty Cold-Rolled Steel Construction Durable Baked Gray Enamel Finish

Shipping Weight: 24 lbs.

Exterior Dimensions: 9 1/2" H x 35 1/4" W x 11 7/8" D

Opening Dimensions: 4 5/8" x 4 3/4" W

Bin has a hemmed divider with a 1" lip providing a convenient location of labels and keeping parts securely in place.

16 Compartment Bins

Part number 2011494

Shipping Weight: 68 lbs

Exterior Dimensions: 42" H x 35 1/4" W x 11 7/8" D

Opening dimensions: 6 1/4" x 8 1/2"

Bin has a hemmed divider and a 1"-2" lip, providing a convenient location of labels and keeping parts securely in place. Heavy-duty cold rolled steel construction and durable baked gray enamel finish.

20 Compartment Bins 24 Compartment Bins

36 Compartment Bins 40 Compartment BinsPart number 2011496

Shipping Weight: 46 lbs.

Exterior Dimensions: 42" H x 17 5/8" W x 11 7/8" D

Opening Dimensions: 4 5/8" H x 4" W

Bin has a hemmed divider with a 1" lip providing a convenient location of labels and keeping parts securely in place. Heavy-duty cold rolled steel construction and durable baked gray enamel finish.

1-888-232-1010fax: (563) 441-6760

www.TrinityHardwareHQ.com [email protected]

TM

20100706/issue 3/rev. a 507

®

Reference numbers and part weights are provided as a reference only. Actual part weight may vary from weights shown.

Part number 2011499Shipping Weight: 17 lbs.Exterior Dimensions:24" H x 19 1/8" W x 8 1/8" D

Used to organize threaded rod. Equipped with ten (10) 3" square holes.

Rack is constructed with a heavy duty cold-rolled steel with a durable baked gray enamel finish. With a ten (10) hole capacity.

Part number 2011497

Shipping Weight: 81 lbs.

Exterior Dimensions:42" H x 35 1/4" W x 11 7/8" D

Opening Dimensions:6" H x 5 5/8" W

Bin has a hemmed divider with a 1" lip providing a convenient location of labels and keeping parts securely in place. Heavy-duty cold-rolled steel construction and durable baked gray enamel finish.

42 Compartment Bins 56 Compartment BinsPart number 2011498

Shipping Weight: 85 lbs.

Exterior Dimensions:42" H x 35 1/4" W x 11 7/8" D

Opening Dimensions:4" x 4 1/2"

Bin has a hemmed divider with a 1" lip prov iding a convenient location of labels and keeping parts securely in place. Heavy-duty cold rolled steel con-struction and durable baked gray enamel finish.

10 Compartment Rod Racks

Part number 2009254Shipping Weight: 90 lbs.Exterior Dimensions:42" H x 35 1/4" W x 11 7/8" D

Opening Dimensions:3 5/8" H x 4" W

Bin has a hemmed divider with a 1" lip providing a convenient location of labels and keeping parts securely in place. Heavy-duty cold-rolled steel construction and durable baked gray enamel finish.

72 Compartment Bins

Base for 40 & 72 Compartment Bins

Part number 2017089Shipping Weight: 13 lbs.Exterior Dimensions: 33 3/4" x 12 1/4" x 5 3/4"

Base for 12" deep parts bins P8622-040 40 compartment bin and P8622-002 72 compartment bin.

6 Drawer Cube UnitsCube units are made of metal and consists of one cube and six matching pans. Cubes are modular and can be stacked. Part numbersSize: 12" W x 15" H x 15 3/4" LRed– 2016605 Blue– 2016606 Gray– 2016607 Tan– 2016608 Yellow– 2017326 Green– 2016610Black– 2016611 Orange– 2016609

508

www.TrinityHardwareHQ.com [email protected]

1-888-232-1010fax: (563) 441-6760

TM

20100706/issue 3/rev. a

®

Reference numbers and part weights are provided as a reference only. Actual part weight may vary from weights shown.

6 compartments 2017087 4 columns (with adj. dividers) 2009604 20 compartments 2009605 24 compartments 2009606

Empty Drawers for Large Tray Assortments

Configuration Part No.

Shipping Weight: 8 lbs.

Prime, cold rolled steel, interlocking, and welded construction. Durable gray powder coat finish. Tray dimensions are: 13 3/8 W x 9 1/4" D x 2" H.

Pictured: 20 compartment tray

Rack for Large TrayAssortment

Part number 2009603 Shipping Weight: 37 lbs.

Exterior Dimensions: 14 3/4" H x 20 1/4" W x 12 3/4" D

This unit has four slide out trays and will help maximize storage space. The unit features a telescopic slide trays. Prime cold rolled steel with Interlocking and welded construction with a durable gray powder coat finish.

Base for Large Tray Assortment Rack

Part number 2017088Shipping Weight: 15 lbs.

Exterior Dimensions: 14 3/4" H x 20 1/4" W x 12 3/4" D

Rack base is available for use with rack, part number 2009603. Prime cold rolled steel with interlocking and welded construction in a durable gray powder coat finish.

1-888-232-1010fax: (563) 441-6760

www.TrinityHardwareHQ.com [email protected]

TM

20100706/issue 3/rev. a 509


Recommended