1. AS9100C / ISO 9001:2000 Registered and NADCAP Accredited Serving Aerospace Suppliers Since 1940

2. Non-Destructive Testing, Surface Finishing and Plating of Aluminum, Steels and Composites / Hard Metal Heat Treat as of 4th quarter 2014 Largest privately held Aerospace Processing Company in North America, and only to include Heat Treatment Currently hold more Boeing Process Approvals then any company Worldwide Offering over 100 approved Finish and Pre-Finish Processes; Aluminum, Steels and Composites About MFCO 3. 5 Separate Divisions International Headquarters Murdock Division DSI Division Chihuahua Division RSC Division MFCO Divisions 4. Customer Service Over 350 fulltime employees 10 fulltime Customer Service Representatives Online order tracking and history reporting RFID Radio Frequency Identification order tracking 5. Aluminum Processing Penetrant Inspect, Hardness and Conductivity Testing, Eddy Current, Ultrasonic Inspection, X-Ray Chemical Conversion, Anodize (Chromic, Sulfuric, Dyed Sulfuric, Boric Sulfuric, Hard Coat Sulfuric ) Masking Services Shot Peening Services Prime, Top Coat, Dry Film Lube, Fuel Tank Coatings, Non-Slip Coatings Part Marking (Inkjet, Vibropeen) 6. Hard Metal Processing Passivate Cadmium Plating Zinc Nickel Hard Chrome Plating * To Name a Few 7. Composite Processing Ultrasonic Inspection Eddy Current Inspection Radiography * To Name a Few 8. Non-Destructive Testing Services and MRO Capabilities Penetrant Inspect Mag Inspect Eddy Current X-ray *MRO Capabilities available in more detailed presentation provided 9. Heat Treatment of Aluminum and Hard Metals Heat Treatment Straighten Age Temper Verification 10. 5 Locations Although we operate as 1 company each one has its own specialty Mclean Division Wellington Division (DSI) Murdock Division Chihuahua Division RSC Division 11. Metal Finishing McLean Division Largest Facility 280,000 sq. ft. Special Processes: Hard Chrome Shot Peen Thermal Spray All Aluminum & Steel Processes As well as over 100 pre & post approved aerospace process disciplines. 12. Multiple Penetrant Inspect techniques Able to process parts up to Eighty feet long Versed in all types of Masking disciplinesDiverse Racking Options Composite Processing 13. Processing of Aircraft DoorsHeated Masking Media Polished Control Ultrasonic Inspection 14. Landing Gear and Nacelle Processing 15. Metal Finishing Company was the only company capable of partnering with Boeing to perform Non-Destructive Testing, Cadmium Plating and Hydrogen Embrittlement Relief of the over 700 pound tail connecting hinges for the Dream Lifter aircraft 16. Metal Finishing Wellington Division Also known as Diversified Services or DSI Can Process up to 80 ft long Parts Aluminum Processing Only Processes Include: Penetrant Inspect Shot Peen Chemical Conversion Anodize Prime Masking Top Coat 17. DSI Division, Wellington Kansas Able to Process Aluminum Stringers, Beams, and other Extrusions up to 80 (Eighty) feet long Penetrant Inspection, Shot Peening, Anodize, Chemical Conversion, Masking, Prime and Top Coat. 18. Metal Finishing Murdock Division Divided into 3 Disciplines Extensive NDT Capabilities Quick Turn Aluminum Processing Aluminum Heat Treatment 19. Metal Finishing Murdock Division 163,000 Sq Feet Lean Engineered and Designed using the latest technology. This facility continuously operated at 99% on time, based on a three day processing guarantee for Penetrant Inspect, Anodize, Chem Film, Simple Masking and Prime. Utilizing RFDI (radio frequency identification) tracking by process and electronic data collection. This allows us to guarantee a three day turn with no premium in per unit cost and no expedite charge. 20. MFCO Heat Treatment Aluminum Solution Furnaces Work Zones (Large) 6 X 6 X 12 (Small) 4 X 4 X 6 (Water, Hot Water, and Glycol quench capabilities) (14) Aluminum Aging Furnaces (Size Range) 2 X 2 X 2 5 X 6.5 X 23 (1) Freezer 14 W X 23 D X 9 T (20F to -15F) with Walk In Cooler 8 X 20 X 8 (15F to 30F) (1) Freezer Truck (Freezer Dimensions) 7 X 7 X 10 (20 F to -10 F) Hand Form capabilities (5) Certified Granite Tables, (2) Shrinker/Stretchers, and (1) Arbor Press 21. Heat Treatment cont. (4) PH Stainless Steel Furnaces (Temperature Range of 300 1400 F ) Lab with (3) New Age Hardness Testers, (2) Fischer Sigma Scope Conductivity Meters, (1) Clark Portable Hardness Tester NADCAP, Boeing, Cessna, Hawker Beechcraft, and Gulfstream Approved Note: Recently Purchased Vacuum Furnace and Equipment for Heat Treatment of Steels and Titanium's, est. production date is third quarter 2014. 22. Metal Finishing Chihuahua Division Full Line of Aluminum Processing: Penetrant Inspect Chemical Conversion Multiple Types of Anodize Masking Prime Top Coat Hard Metal Blasting * Aluminum Heat Treatment as of 4th quarter of 2014 23. Metal Finishing Company Chihuahua City Mexico Division NADCAP APPROVED AUGUST 2012 / HEAT TREATMENT DECEMBER 2012 Currently processing Aluminum Aerospace parts with an employment of 40. This facility is 150,000 square feet in size and MFCO is currently utilizing 60,000 square. Currently Processing includes Penetrant Inspection, Chemical Conversion, Anodize (Chromic, Sulfuric, Boric- Sulfuric), Masking, Prime and Top Coat. 24. Metal Finishing RSC Division Steel Heat Treatment Stainless Steel Heat Treatment Vacuum Furnaces * NADCAP Approval expected by 4th quarter 2014 25. In 2010 The Boeing Company awarded the Performance Excellence Award Gold Level to 128 companies worldwide. Metal Finishing Company was the only Processing Facility of our type to receive this award. Milestone On February 27th of 2012 Metal Finishing Company as a whole achieved a 99.3 % on time delivery rating with 3127 orders, 720,279 parts in house, under the leadership of Richard Smith, VP of Operations, certified AS9100 Lead Auditor and Six Sigma Black Belt. 26. Metal Finishing Company, Inc.Key Personnel Third Generation of ownership. Robert Babst Sr., CEO with Metal Finishing for 45 years. Experience includes Plant Design and Process Development. Robert Babst Jr., President, joined MFCO in 1999, holds Chemical Engineering Degree from Kansas University, with Highest Honors. Key in Plant Design and Process Development. Robert Potter, VP of Non-Destructive Testing under the employment of Metal Finishing Company heading Non-Destructive Testing for over 15 years was elected President in 2012 of ASNT. The American Society of Non-Destructive Testing, the leading body for aerospace testing standards and specification development. Mr. Potter is also a contributing board member of ASMT. James Cummings, VP of Quality Assurance, with MFCO for over 16 years. Current Chair of the Chemical Processing Standing Action Team, Supplier Voting Member Nadcap Chemical, Processing Task Group, Former Vice-Chair of the Nadcap Supplier Support Committee Current Member of Multiple Nadcap Chemical Processing Task Group Sub-Committees, Supplier Member of SAE Committee "B. Ed Ball, VP of Sales and Marketing, joined MFCO in 1999, background includes Purchasing of Aerospace Material, Aerospace Facility Project Management and International Expansion Efforts. 27. MFCO International Headquarters 1329 S. McLean Blvd. Wichita KS 67213 316-267-7280 MFCO Wichita Facility 1423 S. McLean Blvd. Wichita KS 67213 316-267-7289 MFCO Quest Division NDT Inspection 1329 S. McLean Blvd. Wichita KS 67213 316-267-1259 MFCO Murdock and Heat Treat Div. 701 E. Murdock Wichita KS 67214 316-263-1610 Diversified Services Div. 28 Clark Ave. Wellington KS 67152 620-326-7655 MFCO Flame Spray Div. 1441 S. McLean Blvd. Wichita KS 67214 316-267-8041 Metal Finishing, LLC AV Nicolas Gogol #11332 Chihuahua City MX 31136 614-483-1559