Typical drywall screw(supplied by contractor)
Standard j-frame(for brass or stainless steel)
Standard AG10 core
Parts needed for assembly using method #512
Disclaimer:This step by step layout is one of the many ways someone can install their custom grilleusing method #512
Architectural Grille
REV
SHEET
-A3
SIZE
SCALE
42 Second AvenueBrooklyn, NY 11215www.archgrille.com
DESCRIPTION
CUSTOMER Drawn byHeg
#512 Method of fastening 1"=1.25" DMS.512.1
Step 1:Place welded j-frame & AG10 core into the opening. Attach j-frame to wall / ceiling using drywall screws(supplied by contractor).Screw through the provided holes in the flange as necessary.
DMS.512.21"=1.5"#512 Method of fastening
HegDrawn byCUSTOMER
DESCRIPTION
42 Second AvenueBrooklyn, NY 11215www.archgrille.com
SCALE
SIZE
A3 -
SHEET
REV
Architectural Grille
B
DETAIL B SCALE 1.5 : 1
Wall with frame set in
Step 2:J-frame attached to wall / ceiling using drywall screws(supplied by contractor).
DMS.512.31"=1.5"#512 Method of fastening
HegDrawn byCUSTOMER
DESCRIPTION
42 Second AvenueBrooklyn, NY 11215www.archgrille.com
SCALE
SIZE
A3 -
SHEET
REV
Architectural Grille
Step 3:Spackle, sand and finish painting.
DMS.512.41"=1.5"#512 Method of fastening
HegDrawn byCUSTOMER
DESCRIPTION
42 Second AvenueBrooklyn, NY 11215www.archgrille.com
SCALE
SIZE
A3 -
SHEET
REV
Architectural Grille