2 2 MICCRA tools offer a wide variety of potential applications in science, research, manufacturing, and other areas. The following check list is intended as a reference and we've divided the various tasks into a few main categories. www.miccra.com Field of use Biotechnology Medicine Food industry Pharmaceutical industry Pharmaceutical industry Building materials industry Petrochemistry Environmental control Waste water/sludge Medicine Food industry Paper/pulp industry Tobacco industry Environmental control Ceramics industry Dye and lacquer industry Metal working industry Waste water/sludge Dye and lacquer industry Leather industry Paper/pulp industry Pharmaceutical industry Environmental control Waste water/sludge Biotechnology Medicine Food industry Paper/pulp industry Tobacco industry Textile industry Ceramics industry Cosmetics industry Dye and lacquer industry Paper/pulp industry Petrochemistry Ceramics industry Food industry Environmental control Tool DS-5/K-1 DS-8/P DS-20/PG DS-30/PG DS-20/PG SmR DS-20/PF SmR DS-30/PG SmR DS-20/PG MiR DS-30/PG MiR DS-20/PF DS-30/PF DS-20/PF SmR DS-30/PF SmR DS-20/PF MiR DS-20/PF EmR DS-30/PF MiR DS-30/PF EmR RW-30/PG RW-40/PG Sample Volume 0.1-10ml 1-100 ml 100-5,000 ml 250-10,000 ml 100-5,000 ml 100-3,000 ml 250-10,000 ml 100-5,000 ml 250-10,000 ml 100-3,000 ml 250-8,000 ml 100-3,000 ml 250-8,000 ml 100-2,500 ml 250-7,000 ml 250-20,000 ml 2,000-50,000 ml Food industry Process Coarse crushing and final processing; preparation of emulsions and cell-suspensions; shredding of human, animal and plant tissues. Standard equipment for coarse crushing of hard solids in a liquid. Coarse crushing and disruption of human, animal, and plant tissues. Breaking up agglomerates, intense mixing, preparing suspensions. Standard equipment for crushing / pulverizing of hard solids in a liquid, dispersing fine particles. Standard equipment for final processing, sample preparation, and shredding of human, animal and plant tissues. Standard equipment for preparing emulsions, intense mixing. High-speed or intense mixing with less shearing effect.
Transcript
22
MICCRA tools offer a wide variety of potential applications in science, research, manufacturing, and other areas. The following check list is intended as a reference and we've divided the various tasks into a few main categories.
www.miccra.com
Field of useBiotechnologyMedicineFood industryPharmaceutical industryPharmaceutical industryBuilding materials industryPetrochemistryEnvironmental controlWaste water/sludgeMedicineFood industryPaper/pulp industryTobacco industryEnvironmental controlCeramics industryDye and lacquer industryMetal working industryWaste water/sludgeDye and lacquer industryLeather industryPaper/pulp industryPharmaceutical industryEnvironmental controlWaste water/sludgeBiotechnologyMedicineFood industryPaper/pulp industryTobacco industryTextile industryCeramics industryCosmetics industryDye and lacquer industry
Paper/pulp industryPetrochemistryCeramics industryFood industryEnvironmental control
Tool
DS-5/K-1DS-8/P
DS-20/PGDS-30/PG
DS-20/PG SmRDS-20/PF SmR DS-30/PG SmR
DS-20/PG MiRDS-30/PG MiR
DS-20/PFDS-30/PF
DS-20/PF SmRDS-30/PF SmR
DS-20/PF MiRDS-20/PF EmRDS-30/PF MiRDS-30/PF EmR
RW-30/PGRW-40/PG
Sample Volume
0.1-10ml1-100 ml
100-5,000 ml250-10,000 ml
100-5,000 ml100-3,000 ml250-10,000 ml
100-5,000 ml250-10,000 ml
100-3,000 ml250-8,000 ml
100-3,000 ml250-8,000 ml
100-2,500 ml250-7,000 ml
250-20,000 ml2,000-50,000 ml
Food industry
ProcessCoarse crushing and final processing; preparation ofemulsions and cell-suspensions;shredding of human, animal and plant tissues.
Standard equipment forcoarse crushing of hardsolids in a liquid.
Coarse crushing anddisruption of human, animal,and plant tissues.
Breaking up agglomerates,intense mixing, preparingsuspensions.
Standard equipment forcrushing / pulverizing ofhard solids in a liquid,dispersing fine particles.
Standard equipment for finalprocessing, samplepreparation, and shredding of human, animal and planttissues.
Standard equipment forpreparing emulsions, intensemixing.
High-speed or intense mixingwith less shearing effect.
concept
Axle W 20 withPTFE-bearing P 20
3
By a light and compact design, all lab-drives of the MICCRA-Series can be used as hand-held units.
High-Speed-drives continuously
adjustable rpm-rates up to 39,000 rpm reduce processing times significantly.
High powerfor handling large volumes and high
viscosities. Unique application rangesfrom 0.1ml up to
50l.
Comfortable and safe working with smooth
start of the drive.
A uniform shaft sizematches with all
drives - fits to every tool combination of
ART.
The tool
All tools of the MICCRA-Series are made of high-quality 316L stainless steel. Easy to clean and long-lasting.
The driveHigh precision toolsfor highest reliable results at highest peripheral speeds.
Uniform shaft size fits to all drives within the MICCRA-Series
Flexible modular systemfor high economy and small subsequent costs. By combination of different rotors and stators the tool can be adapted to nearly each range of application w.o. large expediture.
Quick-Change-System All elements, rotors and stators can be exchanged quickly without the use of additional opener tools in no time at all.
Quality Made in Germany
Standard 5 year warranty
The
Rotor
Stator
Shaft tube S 20
Stators
Rotors
4
MICCRA D-1 MICCRA D-3/PA MICCRA D-9
145 Watt
73 Watt
200-240 V AC / 50/60 Hz
0.1-500 ml
5,000-35,000 rpm
Yes
No
approx. 800g
Diameter 50 x 230 mm
IP 20/II
No
No
Yes
5-45 oC
up to 93%
Yes
2 years
01 00 00
Power input
Power output
Voltage / Frequency
Volume range
Speed range
Speed adjustment
Electronic stabilizer
Weight (kg)
Dimensions
Protect. syst./safety class
Overload protection
Safety switch
Smooth start
Permissible ambient temp.
Permissible ambient humid.
CE label
Warranty
Order #
Battery
Battery charger
The tiny one!
MICCRA D-1The economy-drive MICCRA D-1 is a small hand-held dispersing and homogenizing device for volumes from 0.1 up to 500 ml.It was especially developed for volumes treated in the bio- and gene technology.It’s an economic drive for a small price with a “soft-touch” housing. More powerful and high-speed than comparable systems on the market.
350 Watt
200 Watt
12V DC (battery)
100-5,000 ml
18,000 rpm
No
No
1.6 kg (incl.battery)
66 x 66 x 225 mm
IP 20/II
No
No
No
5-50 oC
up to 85%
Yes
5 years
03 00 00
Incl.
Incl.
The independent!
MICCRA D-3/PAThe first battery homogenizer with exclusive high power.This 350 Watts drive is superior even to some mains-operated devices.An unmatched rpm to power ratio comes up by its 12V DC motor. It works up easily big sample volumes.Or have you ever homogenized 5,000 ml with a 12V drive?
850 Watt
495 Watt
200-240 V AC / 50/60 Hz
0.1-20,000 ml
11,000-39,000 rpm
Yes
Yes
1.4 kg
66 x 66 x 232 mm
IP 20/II
Thermal Sensor
Yes
Yes
5-50 oC
up to 85%
Yes
5 years
09 00 00
The genius!
MICCRA D-9Light, compact, strong and extremely high-speed.These are the topics of this extraordinary drive which fits to all common laboratory applications from the agrarian technolgy to cell biology.A unique volume range from 0.1 up to 20,000 ml can be handled with this unit and its unequalled results.
The powerful!
MICCRA D-15Although its size is small, this drive is a real high power unit.The successor of the MICCRA D-13, with its integrated constant electronics and its more powerful 1,520 Watt motor works out large volumes, keeping a constant speed even with increasing viscosities.
1,520 Watt
900 Watt
200-240 V AC / 50/60 Hz
100-120 V AC / 50/60 Hz
100-50,000 ml
8,800 -33,600 rpm
Yes
Yes
2.0 kg
70 x 70 x 270 mm
IP 20/II
Thermal Sensor
Yes
Yes
5-50 oC
up to 85%
Yes
5 years
15 00 00
MICCRA D-15
Baffled GlassesSpecial heavy duty glassware.For a quick, intensive sample preparation.
Different sizes available:150 ml; 500 ml; 1,000 mLOrder-No. on request
Carrying cases NK2/AK1made of robust plastic. A drive, tool and accessory carrying case including three different special foam padding trays - matching the variant you have chosen. NK2 Case for units mains operatedAK1 Case for battery system D-3/PAdelivery incl. foam inlaysOrder-No. NK2 00 51 00Order-No. AK1 00 51 10
Timer ZU1for a precise adjustment of process time down to 1 sec.Up to 4 devices connectable.Adj. time 1sec. up to 99 hDimesions 110 x 65 x 200 mmOrder-No. 97 00 40
Universal Clamp UK 80for fixing of vessels up to diameter80 mmBoss head includedSpread 0 - 80mmRod length 150 mmRod diam. 12 mmOrder No. 00 50 02
Boss head KM 20for fixing of accessories and unitson plate standMax. rod diam. 20 mmOrder-No. 00 51 01
Ring SR 80for fixing of conical vesselsBoss head includedDiameter 70 mmRod length 200 mmRod diameter 8 mm
Plate Stand PS300for stationary work also available in SS-Version w.o. powder coated surfacePlain 300 x 200 mmTotal height with 1 rod 335 mmTotal height with 2 rods 670 mmRod diam. 14 mm
Tubes PPT20ART-design. For an optimized homogenizing process. (patents pending)Screw cap includedmade of PP transparentmin./max. volume 2 - 10 mlOrder-No. 97 00 10
Chain Clamp KK 1000for fixing of cylindrical vesselsBoss head includedChain length 1,000 mmRod length 250 mmRod diam. 12 mm
9
Useful supplements, relieving your daily lab work.
