12
SAMPLE STORAGE & SAMPLE HANDLING 2012 CATALOG A COMPLETE AND TRACEABLE SAMPLE STORAGE SOLUTION FOR YOUR LABORATORY
sample storage &sample handling
2012 catalog
a complete and traceable sample
storage solution for your laboratory
3
StarterpackS
cleanroom class 7 All Micronic products are manufactured in a clean room environment.* rNase and DNaseMicronic manufactured products comply with the highest injection molding standards and are, therefore, free of any detectable RNase and DNase contamination. endotoxin (pyrogen)By maintaining the highest possible hygiene level during its production processes, Micronic is able to limit the endotoxin level of produced and packaged articles to an acceptable minimum (< 4 EU/unit).
Sterile productsUpon request, products manufactured at Micronic can be supplied sterilized. Sterilization is carried out using gamma radiation or ethylene oxide treatment.
FDa approval All materials and auxiliary agents used to manufacture sample storage products are selected on quality and the highest purity levels and all are FDA compliant.
ce labelMicronic products comply with the CE label Class 1. Material Safety Data Sheets are available for all our products.**
About Micronic
MicroNic oFFerS a broaD raNge oF SaMpLe Storage tubeS FroM 0.50ML to 7.50ML. the tubeS Fit iN 24-, 48- or 96-WeLL SbS StaNDarD ForMat rackS. together With the raNge oF rackS, SeaLiNg capS, 2D reaDerS, tube MaNageMeNt SoFtWare aND cappiNg/ DecappiNg equipMeNt, MicroNic iS abLe to proviDe a SuitabLe SoLutioN For aLL Your SaMpLe Storage & SaMpLe haNDLiNg requireMeNtS.
Quality and Production
Overview
Micronic offers a range of sample storage tubes that can suit most sample storage applications. The tubes are laser
etched with a permanent 2D Data-Matrix tube identification to ensure sample traceability.
Micronic tubes fit in SBS format tube racks enabling easy integration into automated systems. Tube racks are laser
etched with a unique 1D Barcode on the side.
Micronic screwcaps provide an ideal sealing enclosure for cryogenic storage. For storage at -80ºC and above either a
septum pushcap or screwcap can be used. Additionally, Micronic offers a range Adhesive Sealings products that protect your temporarily exposed samples.
To facilitate simple and rapid sample identification - Micronic offers a range of single tube and rack scanners enabling
smooth integration of sample storage information into laboratory databases.*
Depending on sample throughput Micronic offers a range of manual and automated equipment for capping/decapping
applications and tube management solutions.
This brochure includes three compatibility charts. These overviews will provide you a useful tool to quickly find the
different combinations of Micronic products.
* the track-it software is customizable to match your needs in the laboratory
SaMpLe Storage rackS
SaMpLe Storage tubeS
SaMpLe Storage capS
SaMpLe haNDLiNg i equipMeNt & SoFtWare
SaMpLe Storage reaDerS
* uS Federal Standard 209e class 7 ** in this respect the eu directive 98/79/ec is the leading stan dard techNicaL SpecS
3
StarterpackS
cleanroom class 7 All Micronic products are manufactured in a clean room environment.* rNase and DNaseMicronic manufactured products comply with the highest injection molding standards and are, therefore, free of any detectable RNase and DNase contamination. endotoxin (pyrogen)By maintaining the highest possible hygiene level during its production processes, Micronic is able to limit the endotoxin level of produced and packaged articles to an acceptable minimum (< 4 EU/unit).
Sterile productsUpon request, products manufactured at Micronic can be supplied sterilized. Sterilization is carried out using gamma radiation or ethylene oxide treatment.
FDa approval All materials and auxiliary agents used to manufacture sample storage products are selected on quality and the highest purity levels and all are FDA compliant.
ce labelMicronic products comply with the CE label Class 1. Material Safety Data Sheets are available for all our products.**
About Micronic
MicroNic oFFerS a broaD raNge oF SaMpLe Storage tubeS FroM 0.50ML to 7.50ML. the tubeS Fit iN 24-, 48- or 96-WeLL SbS StaNDarD ForMat rackS. together With the raNge oF rackS, SeaLiNg capS, 2D reaDerS, tube MaNageMeNt SoFtWare aND cappiNg/ DecappiNg equipMeNt, MicroNic iS abLe to proviDe a SuitabLe SoLutioN For aLL Your SaMpLe Storage & SaMpLe haNDLiNg requireMeNtS.
Quality and Production
Overview
Micronic offers a range of sample storage tubes that can suit most sample storage applications. The tubes are laser
etched with a permanent 2D Data-Matrix tube identification to ensure sample traceability.
Micronic tubes fit in SBS format tube racks enabling easy integration into automated systems. Tube racks are laser
etched with a unique 1D Barcode on the side.
Micronic screwcaps provide an ideal sealing enclosure for cryogenic storage. For storage at -80ºC and above either a
septum pushcap or screwcap can be used. Additionally, Micronic offers a range Adhesive Sealings products that protect your temporarily exposed samples.
To facilitate simple and rapid sample identification - Micronic offers a range of single tube and rack scanners enabling
smooth integration of sample storage information into laboratory databases.*
Depending on sample throughput Micronic offers a range of manual and automated equipment for capping/decapping
applications and tube management solutions.
This brochure includes three compatibility charts. These overviews will provide you a useful tool to quickly find the
different combinations of Micronic products.
* the track-it software is customizable to match your needs in the laboratory
SaMpLe Storage rackS
SaMpLe Storage tubeS
SaMpLe Storage capS
SaMpLe haNDLiNg i equipMeNt & SoFtWare
SaMpLe Storage reaDerS
* uS Federal Standard 209e class 7 ** in this respect the eu directive 98/79/ec is the leading stan dard techNicaL SpecS
5
SAMPle STORAGe I TUBeS
Sample storage tubes in a SBS 24-, 48- or 96-well format reduce the space and minimize the cost of sample storage. Permanent laser etched tube identification (2D Data-Matrix and Traxis) ensures that your valuable samples are traceable throughout your sample library.
Micronic can supply a suitable tube for every storage application in your laboratory. For storage of macro samples Micronic provides a range of sample storage tubes with a larger capacity.
The 96 format storage tubes are available in a range of 0.50ml, 0.75ml, 1.10ml, 1.40ml, 2.00ml and 2.50ml. For larger (solid) sample volumes we offer a 2.00ml tube (gross volume 4.00ml) on a 48 format and a 6.00ml and 7.50ml tube on a 24 format (gross volumes).
Typically septum seal pushcaps are used till -80ºC. For cryo-storage (vapor phase LN2) the screwcaps with silicon O-ring are the most ideal solution. Both options ensure secure long-term storage of all your precious samples.
Available with an inner V-bottom or U-bottom for com-plete sample recovery
Inner double O-ring design to maximize filling capacity, maintaining perfect sealing
‘Snap-Lock’ tube option to securely lock the tube in the rack, by applying downward pressure to the tube
2D codes also have a human-readable code Resistant to most organic solvents 100% quality control on all 2D codes Working range is approved from -80ºC to 100ºC *
* Working range from -80ºc to 100ºc. in practice the tubes are also used in lower temperatures till vapor phase LN2
n
n
n
n
n
n
n
SAMPle STORAGe I RAckS
All Micronic storage racks comply with the SBS standard and provide an easy and automation friendly method to store your tubes. For every tube format Micronic provides a robust and user friendly storage rack.
Loborack-96 Optimized to accommodate 0.50ml and 0.75ml tubes Low profile and space saving SBS format compatible Laser etched linear barcode on the side Automation friendly rack design Resistant against most organic solvents Transparent lockable cover for secure storage Autoclavable (5-10 times) Tubes can be ‘snap-locked’ in the rack to prevent them
from falling out
roborack-96 Optimized to accommodate: 1.10ml, 1.40ml, 2.00ml and
2.50ml tubes Automation friendly rack design SBS format compatible Laser etched linear barcode on the side Sure shot contoured well top ensure positive tube lead in Tubes can be ‘snap-locked’ in the rack to prevent them
from falling out Autoclavable (5-10 times)
comorack-24 & comorack-96 Optimized to accommodate 6.00ml & 7.50ml tubes Robust design Autoclavable (up to 100 times) Custom barcode labelling service available
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
2D Data-Matrix 6.00ml, 2.00ml and 1.40ml screwcap tubes
2.50ml tubes in 96-well format
2.00ml screwcap tube in 48-well format
Soon available
0.75ml amber tubes for light sensitive samples
7.50ml snapcap tubes, available with barcode in 24-well format Comorack
Loborack with laser etched barcode and 0.50ml tubes
Roborack-96 with 2D Data-Matrix tubes
Arctic Rack-24 with laser etched barcode and new 6.00ml screwcap tubes
Loborack with laser etched barcode and 0.50ml tubes
Roborack with manual screwcap remover and 1.40ml screwcap tubes
5
SAMPle STORAGe I TUBeS
Sample storage tubes in a SBS 24-, 48- or 96-well format reduce the space and minimize the cost of sample storage. Permanent laser etched tube identification (2D Data-Matrix and Traxis) ensures that your valuable samples are traceable throughout your sample library.
Micronic can supply a suitable tube for every storage application in your laboratory. For storage of macro samples Micronic provides a range of sample storage tubes with a larger capacity.
The 96 format storage tubes are available in a range of 0.50ml, 0.75ml, 1.10ml, 1.40ml, 2.00ml and 2.50ml. For larger (solid) sample volumes we offer a 2.00ml tube (gross volume 4.00ml) on a 48 format and a 6.00ml and 7.50ml tube on a 24 format (gross volumes).
Typically septum seal pushcaps are used till -80ºC. For cryo-storage (vapor phase LN2) the screwcaps with silicon O-ring are the most ideal solution. Both options ensure secure long-term storage of all your precious samples.
Available with an inner V-bottom or U-bottom for com-plete sample recovery
Inner double O-ring design to maximize filling capacity, maintaining perfect sealing
‘Snap-Lock’ tube option to securely lock the tube in the rack, by applying downward pressure to the tube
2D codes also have a human-readable code Resistant to most organic solvents 100% quality control on all 2D codes Working range is approved from -80ºC to 100ºC *
* Working range from -80ºc to 100ºc. in practice the tubes are also used in lower temperatures till vapor phase LN2
n
n
n
n
n
n
n
SAMPle STORAGe I RAckS
All Micronic storage racks comply with the SBS standard and provide an easy and automation friendly method to store your tubes. For every tube format Micronic provides a robust and user friendly storage rack.
Loborack-96 Optimized to accommodate 0.50ml and 0.75ml tubes Low profile and space saving SBS format compatible Laser etched linear barcode on the side Automation friendly rack design Resistant against most organic solvents Transparent lockable cover for secure storage Autoclavable (5-10 times) Tubes can be ‘snap-locked’ in the rack to prevent them
from falling out
roborack-96 Optimized to accommodate: 1.10ml, 1.40ml, 2.00ml and
2.50ml tubes Automation friendly rack design SBS format compatible Laser etched linear barcode on the side Sure shot contoured well top ensure positive tube lead in Tubes can be ‘snap-locked’ in the rack to prevent them
from falling out Autoclavable (5-10 times)
comorack-24 & comorack-96 Optimized to accommodate 6.00ml & 7.50ml tubes Robust design Autoclavable (up to 100 times) Custom barcode labelling service available
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
2D Data-Matrix 6.00ml, 2.00ml and 1.40ml screwcap tubes
2.50ml tubes in 96-well format
2.00ml screwcap tube in 48-well format
Soon available
0.75ml amber tubes for light sensitive samples
7.50ml snapcap tubes, available with barcode in 24-well format Comorack
Loborack with laser etched barcode and 0.50ml tubes
Roborack-96 with 2D Data-Matrix tubes
Arctic Rack-24 with laser etched barcode and new 6.00ml screwcap tubes
Loborack with laser etched barcode and 0.50ml tubes
Roborack with manual screwcap remover and 1.40ml screwcap tubes
7
SAMPle STORAGe I cAPS
SAMPle STORAGe I AdheSIve SeAlInG fOIlS
SAMPle hAndlInG I ReAdeRS
Micronic offers a range of tube capping products. For effective cryogenic storage a screwcap with silicon O-ring can be used. For storage from -80ºC and above either a TPE septum pushcap (TPE capcluster) or a screwcap can be used. All tubes have a upper inner thread or double O-ring design providing a perfect sealing and ensuring maximum sample integrity.
Multiple colors for easy identificationScrewcaps with Silicon O-ring for optimal closureTPE Caps or Screwcaps are automation friendlyResistant to high chemical solventsTPE Caps are also available in capmats or capstripsTPE Caps are multi piercable TPE Capcluster provides a mechanism for securely sealing 96 tubes in one go, remove the retaining foil to leave each tube individually capped
n
n
n
n
n
n
n
To enable fast, accurate and efficient sample identification - Micronic offers a range of single tube readers and whole rack scanners. Micronic rack scanners are bench top scanners that can read 24-, 48-, 96- and 384-format coded tubes (2D Data-Matrix or Traxis).
The tracxer code reader rS210 is a small bench top rack scanner that can read both 2D Data-Matrix and Traxis codes within 5 seconds, which is fast enough to maintain the sample temperature. The user friendly software provides an ideal solution to optimize your sample traceability.
A low cost solution rack reader is the tracxer code reader rS297. This scanner identifies a whole rack with 2D Data-Matrix or Traxis tubes within 15 seconds. The user friendly software enables easy transfer of the tube ID’s into any other (database) program.
The SampleScan Mini has an integrated linear barcode reader mounted on the side. The reader has a durable steal casing with integrated scan buttons. 2D Data-Matrix coded tubes are read within 5 seconds.
To identify single tubes we offer an easy to use singe tube reader. The SampleScan plus can read any 2D Data-Matrix coded tube within 0.5 seconds. Simply place one tube in the adapter and the tube ID will appear in any program using keyboard wedge technology (USB connection, no software installation).
The Wireless Single tube reader can quickly and reliably read 1D linear or 2D Data-Matrix codes. The codes will appear in a database or spreadsheet (USB connection, no software installation).
n
n
n
n
n
n
n
n
Adhesive sealing foils can be used in combination with Micronic and other brands of storage tubes as well as deep well blocks and microplates.
Ideal for temporary storageProvides a secure seal to microplates (in temperature range of -80°C to +120°C)Prevents cross-contamination and evaporationOutstanding performance with autosamplersMinimum force needed to pierceNo coring or tearing of material, no clogging of the needleVariety of adhesives available with different degrees of DMSO/chemical resistance Pattern adhesive seal films can be manufactured in roll format for automation
Tracxer Code Reader RS210
SampleScan Mini with 1D barcode reader
SampleScan Plus
Tracxer Code Reader RS297
Wireless Single Tube Reader (1D & 2D)
Screwcaps green
Various colors of pushcaps
Silicone mat on 0.50ml tubes
Teflon adhesive foil on 0.75ml tubes
7
SAMPle STORAGe I cAPS
SAMPle STORAGe I AdheSIve SeAlInG fOIlS
SAMPle hAndlInG I ReAdeRS
Micronic offers a range of tube capping products. For effective cryogenic storage a screwcap with silicon O-ring can be used. For storage from -80ºC and above either a TPE septum pushcap (TPE capcluster) or a screwcap can be used. All tubes have a upper inner thread or double O-ring design providing a perfect sealing and ensuring maximum sample integrity.
Multiple colors for easy identificationScrewcaps with Silicon O-ring for optimal closureTPE Caps or Screwcaps are automation friendlyResistant to high chemical solventsTPE Caps are also available in capmats or capstripsTPE Caps are multi piercable TPE Capcluster provides a mechanism for securely sealing 96 tubes in one go, remove the retaining foil to leave each tube individually capped
n
n
n
n
n
n
n
To enable fast, accurate and efficient sample identification - Micronic offers a range of single tube readers and whole rack scanners. Micronic rack scanners are bench top scanners that can read 24-, 48-, 96- and 384-format coded tubes (2D Data-Matrix or Traxis).
The tracxer code reader rS210 is a small bench top rack scanner that can read both 2D Data-Matrix and Traxis codes within 5 seconds, which is fast enough to maintain the sample temperature. The user friendly software provides an ideal solution to optimize your sample traceability.
A low cost solution rack reader is the tracxer code reader rS297. This scanner identifies a whole rack with 2D Data-Matrix or Traxis tubes within 15 seconds. The user friendly software enables easy transfer of the tube ID’s into any other (database) program.
The SampleScan Mini has an integrated linear barcode reader mounted on the side. The reader has a durable steal casing with integrated scan buttons. 2D Data-Matrix coded tubes are read within 5 seconds.
To identify single tubes we offer an easy to use singe tube reader. The SampleScan plus can read any 2D Data-Matrix coded tube within 0.5 seconds. Simply place one tube in the adapter and the tube ID will appear in any program using keyboard wedge technology (USB connection, no software installation).
The Wireless Single tube reader can quickly and reliably read 1D linear or 2D Data-Matrix codes. The codes will appear in a database or spreadsheet (USB connection, no software installation).
n
n
n
n
n
n
n
n
Adhesive sealing foils can be used in combination with Micronic and other brands of storage tubes as well as deep well blocks and microplates.
Ideal for temporary storageProvides a secure seal to microplates (in temperature range of -80°C to +120°C)Prevents cross-contamination and evaporationOutstanding performance with autosamplersMinimum force needed to pierceNo coring or tearing of material, no clogging of the needleVariety of adhesives available with different degrees of DMSO/chemical resistance Pattern adhesive seal films can be manufactured in roll format for automation
Tracxer Code Reader RS210
SampleScan Mini with 1D barcode reader
SampleScan Plus
Tracxer Code Reader RS297
Wireless Single Tube Reader (1D & 2D)
Screwcaps green
Various colors of pushcaps
Silicone mat on 0.50ml tubes
Teflon adhesive foil on 0.75ml tubes
9
SAMPle hAndlInG I SOfTwARe
SAMPle hAndlInG I eQUIPMenT
SAMPle hAndlInG I decAPPInG
Micronic offers a wide range of manual and automated capping and decapping solutions. In every laboratory it is important to open and close your samples quickly and reliably without cross contamination. Micronic offers decapping and capping products to suit all throughput and budget needs.
Manual capmat SealerEasy and efficient option to cap 96 tubes within secondsAdapters available for all tube sizesIntegrity of your samples ensured
electric capperCaps entire rack of 96 tubes within 10 secondsCompatible with the complete Micronic range of tubes and racksRobust and user friendly bench top deviceControlled pressure to press all caps down evenly
n
n
n
n
n
n
n
tubesorter SystemsFor cherry picking or re-arraying your sample storage library the Tubesorter can quickly transfer tubes from one rack to another whilst maintaining sample identity. Reliable robotics allow for the unattended processing of up to 20 tube racks at a time.
Work list based processing, fast and reliable operationTube level check and Analytical balance optionIntegrated 2D Data-Matrix reader
volumecheckTo determine the exact volume in your storage tubes the Volumecheck is a non contact inspection system.
Accuracy +/- 10ul to +/- 15ulNon contact acoustic volume measurementCompatible with almost every SBS format labwareThroughput 1 minute for 96 wells/tubes
n
n
n
n
n
n
n
automatic Decapper-96Decaps 96 TPE pushcaps within 15 secondsUser friendly and robust benchtop deviceMinimizes cross contamination while decappingFully compatible with all tube sizesIncreases productivityCan be used as a stand-alone instrument or in a fully automated environment
automatic DecapperAn automated solution for capping and decapping screwcap tubesOpens and closes 8 or 12 tubes in a row or column and opens 96 tubes in less then 1 minutePrevents cross contamination
n
n
n
n
n
n
n
n
n
SAMPle hAndlInG I cAPPInG
Micronic’s Track-it software is a Laboratory Sample Manage-ment System which allows you to organise and manage your storage needs while enabling you to keep track of individual samples within your laboratory.
Modular based systemManage samples, equipment, reagents and moreWeb based access1D and 2D Data-Matrix code compatibleCross database searchesCompatible with other information systems
n
n
n
n
n
n
Track-IT user interface
Track-IT sample data input
Manual Capmat Sealer
Electric Capper Volumecheck
Tubesorter XL9
Automatic Decapper
Automatic Decapper-96
9
SAMPle hAndlInG I SOfTwARe
SAMPle hAndlInG I eQUIPMenT
SAMPle hAndlInG I decAPPInG
Micronic offers a wide range of manual and automated capping and decapping solutions. In every laboratory it is important to open and close your samples quickly and reliably without cross contamination. Micronic offers decapping and capping products to suit all throughput and budget needs.
Manual capmat SealerEasy and efficient option to cap 96 tubes within secondsAdapters available for all tube sizesIntegrity of your samples ensured
electric capperCaps entire rack of 96 tubes within 10 secondsCompatible with the complete Micronic range of tubes and racksRobust and user friendly bench top deviceControlled pressure to press all caps down evenly
n
n
n
n
n
n
n
tubesorter SystemsFor cherry picking or re-arraying your sample storage library the Tubesorter can quickly transfer tubes from one rack to another whilst maintaining sample identity. Reliable robotics allow for the unattended processing of up to 20 tube racks at a time.
Work list based processing, fast and reliable operationTube level check and Analytical balance optionIntegrated 2D Data-Matrix reader
volumecheckTo determine the exact volume in your storage tubes the Volumecheck is a non contact inspection system.
Accuracy +/- 10ul to +/- 15ulNon contact acoustic volume measurementCompatible with almost every SBS format labwareThroughput 1 minute for 96 wells/tubes
n
n
n
n
n
n
n
automatic Decapper-96Decaps 96 TPE pushcaps within 15 secondsUser friendly and robust benchtop deviceMinimizes cross contamination while decappingFully compatible with all tube sizesIncreases productivityCan be used as a stand-alone instrument or in a fully automated environment
automatic DecapperAn automated solution for capping and decapping screwcap tubesOpens and closes 8 or 12 tubes in a row or column and opens 96 tubes in less then 1 minutePrevents cross contamination
n
n
n
n
n
n
n
n
n
SAMPle hAndlInG I cAPPInG
Micronic’s Track-it software is a Laboratory Sample Manage-ment System which allows you to organise and manage your storage needs while enabling you to keep track of individual samples within your laboratory.
Modular based systemManage samples, equipment, reagents and moreWeb based access1D and 2D Data-Matrix code compatibleCross database searchesCompatible with other information systems
n
n
n
n
n
n
Track-IT user interface
Track-IT sample data input
Manual Capmat Sealer
Electric Capper Volumecheck
Tubesorter XL9
Automatic Decapper
Automatic Decapper-96
11
SAMPle STORAGe I STARTeR PAckS
To quickly start using a 2D-coded tube system - Micro nic offers a cost effective and complete Starterpack.A Starterpack consists of a case of racks with tubes, matching caps and a 2D-code single rack scanner to identify the storage tubes. In addition, the Starterpack includes a capping device and some manual tube handling tools for selec ting and decapping tubes.
Complete package at an attractive priceEnables users to start storing and sealing their samplesChoice of screwcap tubes or septum pushcap tubesStarterpacks available for each tube size
n
n
n
n
MIcROnIc I OveRvIewS
rackS overvieW aND SpecS
tubeS overvieW aND SpecS
capS overvieW aND SpecS
Capping per # tubesFormatMaterialColoursPierceableAvailable as pre-splitRe-usableChemical resistanceAvailable SterileAvailable DNA free (EtO)Cleanroom producedTemperature range
8 or 1Strip of 8
EVATransparent
NoNoNo++YesYesYes
-40ºC
8Strip of 8
EVATransparent
NoNoNo++YesYesYes
-40ºC
96Mat of 96
EVATransparent
NoNoNo++YesYesYes
-40ºC
96 or 12 or 8Mat of 96
TPE10 different colours
YesYesNo+++YesYesYes
-80ºC
96 or 1Mat of 96 individual caps
TPE10 different colours
YesYesNo+++YesYesYes
-80ºC
eva capbaND break-oFF eva capbaND eva capMat tpe capMat tpe capcLuSter ScreWcap
1Single cap
PP-Silicone O-ring8 different colours
NoNoYes++YesYesYes
Vapor LN2
Tube Volumes (nominal)Height (low cover)
Height (standard cover)
Height (high cover)Height (extra high cover)
Available BarcodedAvailable Laser Etched Barcoded (white rack)TwistlockAvailable SterileAvailable DNA free (EtO)Sureshot design*Rack locking system (cover)AutoclavableCleanroom producedTemperature rangeChemical resistance
0.50ml, 0.75ml
YesYes
YesYesYesYesYesYesYes
-80°C – +140°C+++
0.50ml with TPE Pushcap0.50ml with EVA Pushcap0.50ml with Screwcap0.75ml with TPE Pushcap0.75ml with EVA Pushcap0.75ml with Screwcap
n/a
23.8mm
31.7mm
38.7mmn/a
1.10ml, 1.40ml, 2.50ml
YesYes
YesYesYesYesYesYesYes
-80°C – +140°C+++
1.40ml
YesNo
NoYesYesNoYesYesYes
-80°C – +140°C+
7.50ml
YesNo
YesYesYesNoYesYesYes
-80°C – +140°C+
1.10ml with TPE Pushcap1.10ml with EVA Pushcap1.10ml with Screwcap1.40ml with TPE Pushcap1.40ml with EVA Pushcap1.40ml with Screwcap 2.50ml with TPE Pushcap2.50ml with EVA Pushcap
41.2mm
49.1mm
56.1mm88mm
n/a
1.40ml with TPE Pushcap1.40ml with EVA Pushcap
n/an/a
n/a
58mm
n/an/a
n/a
7.50ml with hinged cap
n/an/a
n/a
58mm
n/an/a
Loborack-96 roborack-96 coMorack-96 coMorack-24
Storage Rack
Pushcap and/or ScrewcapInner tube shapeMax. working volume Pushcap*Max. working volume Srewcap*Tube heightTube height with TPE capTube height with Screwcap2D Data-Matrix codedTraXis codedAlphanumeric Non CodedCapping options
Available pre-cappedThread type optionsTwistlockSnaptube optionAvailable SterileAvailable DNA free (EtO)Cleanroom produced Temperature Availability
Loborack-96
P+SV
0.27ml0.19ml
18.5mm19.5mm25.6mm
YesYesYesYes
No CapScrewcap
TPE PushcapYes
InternalYesYesYesYesYes
Vapor LN2Bulk, Rack
Loborack-96
P+SV
0.52ml0.44ml26mm27mm
33.1mmYesYesYesYes
No CapScrewcap
TPE PushcapYes
InternalYesYesYesYesYes
Vapor LN2Bulk, Refill, Rack
Loborack-96
PV or U
0.52 or 0.57mln/a
26mm27mm
n/aYesYesYesYes
No CapTPE Pushcap
YesNoneNoYesYesYesYes
-80ºCBulk, Refill, Rack
Roborack-96
P+SV
0.87ml0.78ml
36.5mm37.5mm43.6mm
YesNoNoYes
No CapTPE Pushcap
ScrewcapYes
InternalYesYesYesYesYes
Vapor LN2Bulk,Rack
Roborack-96Comorack-96
PU
1.11mln/a
44mm45mm
n/aNoNoYesYes
No CapTPE Pushcap
YesNoneNoNoYesYesYes
-80ºCBulk, Refill, Rack
Roborack-96Comorack-96
PV or U
1.12 or 1.19mln/a
44mm45mm
n/aYesYesYesYes
No CapTPE Pushcap
YesNoneNoYesYesYesYes
-80ºCBulk, Refill, Rack
Roborack-96Comorack-96
P+SV or U
1.12 or 1.19ml1.09 or 1.16ml
44mm45mm
51.1mmYesYesYesYes
No CapScrewcap
TPE PushcapYes
InternalYesYesYesYesYes
Vapor LN2Bulk, Refill, Rack
Roborack-96
PU
2.68mln/a
82.4mm83.4mm
n/aNoNoNoYes
No CapTPE Pushcap
YesNoneNoNoYesYesYes
-80ºCBulk, Rack
Comorack-24
Hinged capFlat
6.33mln/a
44mm44mm
n/aYesNoNoYes
Flipcap
NoNoneYesNoYesYesYes
-20ºCBulk, Rack
0.50 ML 0.75 ML 0.75 ML 1.10 ML 1.40 ML 1.40 ML 1.40 ML 2.50 ML 7.50 ML
Micronic Starterpack
*Max. working volume at room temperature
11
SAMPle STORAGe I STARTeR PAckS
To quickly start using a 2D-coded tube system - Micro nic offers a cost effective and complete Starterpack.A Starterpack consists of a case of racks with tubes, matching caps and a 2D-code single rack scanner to identify the storage tubes. In addition, the Starterpack includes a capping device and some manual tube handling tools for selec ting and decapping tubes.
Complete package at an attractive priceEnables users to start storing and sealing their samplesChoice of screwcap tubes or septum pushcap tubesStarterpacks available for each tube size
n
n
n
n
MIcROnIc I OveRvIewS
rackS overvieW aND SpecS
tubeS overvieW aND SpecS
capS overvieW aND SpecS
Capping per # tubesFormatMaterialColoursPierceableAvailable as pre-splitRe-usableChemical resistanceAvailable SterileAvailable DNA free (EtO)Cleanroom producedTemperature range
8 or 1Strip of 8
EVATransparent
NoNoNo++YesYesYes
-40ºC
8Strip of 8
EVATransparent
NoNoNo++YesYesYes
-40ºC
96Mat of 96
EVATransparent
NoNoNo++YesYesYes
-40ºC
96 or 12 or 8Mat of 96
TPE10 different colours
YesYesNo+++YesYesYes
-80ºC
96 or 1Mat of 96 individual caps
TPE10 different colours
YesYesNo+++YesYesYes
-80ºC
eva capbaND break-oFF eva capbaND eva capMat tpe capMat tpe capcLuSter ScreWcap
1Single cap
PP-Silicone O-ring8 different colours
NoNoYes++YesYesYes
Vapor LN2
Tube Volumes (nominal)Height (low cover)
Height (standard cover)
Height (high cover)Height (extra high cover)
Available BarcodedAvailable Laser Etched Barcoded (white rack)TwistlockAvailable SterileAvailable DNA free (EtO)Sureshot design*Rack locking system (cover)AutoclavableCleanroom producedTemperature rangeChemical resistance
0.50ml, 0.75ml
YesYes
YesYesYesYesYesYesYes
-80°C – +140°C+++
0.50ml with TPE Pushcap0.50ml with EVA Pushcap0.50ml with Screwcap0.75ml with TPE Pushcap0.75ml with EVA Pushcap0.75ml with Screwcap
n/a
23.8mm
31.7mm
38.7mmn/a
1.10ml, 1.40ml, 2.50ml
YesYes
YesYesYesYesYesYesYes
-80°C – +140°C+++
1.40ml
YesNo
NoYesYesNoYesYesYes
-80°C – +140°C+
7.50ml
YesNo
YesYesYesNoYesYesYes
-80°C – +140°C+
1.10ml with TPE Pushcap1.10ml with EVA Pushcap1.10ml with Screwcap1.40ml with TPE Pushcap1.40ml with EVA Pushcap1.40ml with Screwcap 2.50ml with TPE Pushcap2.50ml with EVA Pushcap
41.2mm
49.1mm
56.1mm88mm
n/a
1.40ml with TPE Pushcap1.40ml with EVA Pushcap
n/an/a
n/a
58mm
n/an/a
n/a
7.50ml with hinged cap
n/an/a
n/a
58mm
n/an/a
Loborack-96 roborack-96 coMorack-96 coMorack-24
Storage Rack
Pushcap and/or ScrewcapInner tube shapeMax. working volume Pushcap*Max. working volume Srewcap*Tube heightTube height with TPE capTube height with Screwcap2D Data-Matrix codedTraXis codedAlphanumeric Non CodedCapping options
Available pre-cappedThread type optionsTwistlockSnaptube optionAvailable SterileAvailable DNA free (EtO)Cleanroom produced Temperature Availability
Loborack-96
P+SV
0.27ml0.19ml
18.5mm19.5mm25.6mm
YesYesYesYes
No CapScrewcap
TPE PushcapYes
InternalYesYesYesYesYes
Vapor LN2Bulk, Rack
Loborack-96
P+SV
0.52ml0.44ml26mm27mm
33.1mmYesYesYesYes
No CapScrewcap
TPE PushcapYes
InternalYesYesYesYesYes
Vapor LN2Bulk, Refill, Rack
Loborack-96
PV or U
0.52 or 0.57mln/a
26mm27mm
n/aYesYesYesYes
No CapTPE Pushcap
YesNoneNoYesYesYesYes
-80ºCBulk, Refill, Rack
Roborack-96
P+SV
0.87ml0.78ml
36.5mm37.5mm43.6mm
YesNoNoYes
No CapTPE Pushcap
ScrewcapYes
InternalYesYesYesYesYes
Vapor LN2Bulk,Rack
Roborack-96Comorack-96
PU
1.11mln/a
44mm45mm
n/aNoNoYesYes
No CapTPE Pushcap
YesNoneNoNoYesYesYes
-80ºCBulk, Refill, Rack
Roborack-96Comorack-96
PV or U
1.12 or 1.19mln/a
44mm45mm
n/aYesYesYesYes
No CapTPE Pushcap
YesNoneNoYesYesYesYes
-80ºCBulk, Refill, Rack
Roborack-96Comorack-96
P+SV or U
1.12 or 1.19ml1.09 or 1.16ml
44mm45mm
51.1mmYesYesYesYes
No CapScrewcap
TPE PushcapYes
InternalYesYesYesYesYes
Vapor LN2Bulk, Refill, Rack
Roborack-96
PU
2.68mln/a
82.4mm83.4mm
n/aNoNoNoYes
No CapTPE Pushcap
YesNoneNoNoYesYesYes
-80ºCBulk, Rack
Comorack-24
Hinged capFlat
6.33mln/a
44mm44mm
n/aYesNoNoYes
Flipcap
NoNoneYesNoYesYesYes
-20ºCBulk, Rack
0.50 ML 0.75 ML 0.75 ML 1.10 ML 1.40 ML 1.40 ML 1.40 ML 2.50 ML 7.50 ML
Micronic Starterpack
*Max. working volume at room temperature
www.micronic.com
Micronic has a broader product range than the products shown in this brochure. For our complete product portfolio contact Micronic Europe at +31 (0)320 277070 or send your e-mail to [email protected]
please visit our website: www.micronic.com
Where to buY
Aluminium Decapper-8
Screwcaps in cap carrier
Traxis 1.40ml pushcap tube
Laser etched Alphanumeric codings
Single Decapper-1
MicroNic Platinastraat 518211 AR LelystadTHE NETHERLANDS
