71www.balluff.com
MicropulseP Style
BTLP
Balluff magnets areavailable in captive orfloating styles. All BTL5magnets shown here canbe used on any BalluffMicropulse transducer.
The BTL5-P-3800-2magnet can be used with avertical offset from theupper surface of thetransducer body of0...4 mm, and theBTL5-P-5500-2 permits adistance of 5...15 mm. TheBTL5-P-4500-1 is anelectromagnet and requiresa supply voltage of 24 V,which can be turned on andoff for selective activation.This allows multiplexoperation with multiplemagnets on a singletransducer, since only onemagnet is active at a time.
Each mounting foot includes 4 isolationwashers and 2 mounting screws orderedseparately.Order part number:BTL P-M5-VZ (sold in pairs)
14D
9
150+4
6850
C
38
2028
Ø4.2
Lateral offset:C = ±2 mmVertical distanceof magnet:D = 0.1...4 mm
Descriptionfor SeriesType
MagnetBTL Profile
Floating
Ordering Code
Housing MaterialWeightMagnet Traverse SpeedSupply VoltageCurrent DrawOperating Temperature/Storage TemperatureIncluded
BTL5-P-3800-2
Plasticapprox. 12 g
any
–40...+85 °CMagnet
2 mounting screws DIN 84 M4×35-A2with washers and nuts
TransducerStroke Length (mm)
0051-04570508-07110762-09141016-1220
127015241778203222862540279430483302360639624267457248775080
RecommendedNumber of Feet
23456789
1011121314151617181920
Floating Magnets
Number of Mounting Feet (Recommended)
72
MicropulseP Style
Please indicate cable length in ordering code:03, 05, 10, 15e.g. 050M = 5M
Non-contact!Vertical offset0.1...4 mm or5...15 mm
Lateral offset:C = ±15 mmVertical distanceof magnet:D = 5...15 mm
BTL5-P-5500-2
Plasticapprox. 40 g
any
–40...+85 °CMagnet
MagnetBTL Profile
Extended range, Floating
Descriptionfor SeriesType
Ordering Code
Housing MaterialWeightMagnet Traverse SpeedSupply VoltageCurrent DrawOperating/Storage TemperatureIncludedAccessories(please order separately)
Floating Magnets
Lateral offset:C = ±2 mmVertical distanceof magnet:D = 0.1...2 mm
BTL5-P-4500-1
Plasticapprox. 90 g
any24 Vdc100 mA
–40...+60 °CMagnet
Straight connector C04-AEC-00-VY-050MRight-angle connector C04-BEC-00-VY-050M
MagnetBTL Profile
Electromagnet, Floating
Connector for Electromagnet
C04-AEC
C04-BEC
73www.balluff.com
MicropulseP Style
BTLP
Captive Magnets
Ordering Code
Material
WeightMagnet Traverse SpeedOperating/Storage Temperature
Descriptionfor SeriesType
HousingSlide Surface
BTL5-F-2814-1S
PlasticPlastic
approx. 28 gany
–40...+85 °C
MagnetBTL Profile
Standard Captive
BTL5-M-2814-1S
Anodized aluminumPlastic
approx. 32 gany
–40...+85 °C
BTL5-N-2814-1S
Anodized aluminumPlastic
approx. 35 gany
–40...+85 °C
MagnetBTL Profile
Special Purpose Captive
MagnetBTL Profile
Special Purpose Captive
Ordering Code
Material
WeightMagnet Traverse SpeedOperating/Storage Temperature
Descriptionfor SeriesType
HousingSlide Surface
Each mounting foot includes4 isolation washers and 2mounting screws orderedseparately.Order part number:BTL P-M5-VZ (sold in pairs)
74
MicropulseP Style
ProductCompatibility
Control ArmBTL5-F-2814-1S and BTL5-R-2814-1S
Swivel EyeBTL5-GS08-
Ball JointBTL5-GS08-
BTL Z-5-GS08-_ _ _ _-AAluminum150 g/m
BTL5-SWIVEL-EYEAluminum/Steel
14 g
BTL5-A-BJ01Aluminum/Steel
11 g
Ordering CodeMaterialWeight
��� !
��� !
�
�
*Specify control arm length in mm e.g. BTL-5-GS08-0305-A
Accessories
Mounting feetNarrow (optional)
Mounting feetStandard
*
BTL5-FEET-NR (one foot)Aluminum
6 g
**Each BTL P-M5-VZ MountingFoot is supplied with 4 plasticisolation washers with aninner diameter of 5.1 mm. Ifthe cable shield is connectedat the electrical panel, thesewashers should be used toisolate the transducer bodyfrom the machine frame,thereby avoiding potentialground loops.
Ordering CodeMaterialWeight
BTL P-M5-VZ (sold in pairs)Black Anodized Aluminum
12 g
* Indicate cable length in orderingcode (consult factory for longerlengths)00 = connector only (only S32
and S33)02 = 2 meter cable05 = 5 meter cable
For additional connectors, seepage 107-114
ProductType
**
Product
TypeStraight Connector
8-pin femaleRight-angle Connector
8-pin female
Ordering CodeMaterialContact SurfaceSolder ConnectionCableCable DiameterAllowable Cable DiameterCable MaterialEnvironmental Rating
BKS-S 32M-_ _CuZn, nickel plated
0.8 µm Au00 option only
7 x 0.25 mm2/AWG 246.35 mm ± 0.35 mm
6…8 mmPUR
IP 67 (when installed)
BKS-S 33M-_ _CuZn, nickel plated
0.8 µm Au00 option only
7 x 0.25 mm2/AWG 246.35 mm ± 0.35 mm
6…8 mmPUR
IP 67 (when installed)
MoldedStraight Connector
8-pin female
BKS-S 232-PU-_ _CuZn, nickel plated
0.8 µm AuN/A
7 x 0.25 mm2/AWG 246.35 mm ± 0.35 mm
N/APUR
IP 67 (when installed)
MoldedRight-angle Connector
8-pin female
BKS-S 233-PU-_ _CuZn, nickel plated
0.8 µm Au N/A
7 x 0.25 mm2/AWG 246.35 mm ± 0.35 mm
N/APUR
IP 67 (when installed)
** * *