Mastip brings the MMA-15 Temperature Control module to injection moulders seeking a high quality, reliable control module that is flexible, easy to set up and simple to operate. We back this up with our four year warranty*.
Designed to work under demanding conditions, the MMA-15 control module provides accuratecontrol of your Hot Runner System temperature.
FeaturesThe MMA-15 is based on proven technology and is manufactured to the highest quality ensuring long term reliability backed up with our four year warranty*. The module is compatible with the International delivery standard meaning it is suitable for use in existing compatible cabinets such as the Mastip MMZ range. Accuracy is achieved via the self tuning PID algorithm providing control within ±1ºC. Unique to this module is the “Idle” mode which leaves the unit in stand by after a power failure, reducing the chance of power spikes or the hot runner being re-heated unintentionally.
Benefits• Soft Start function to protect heaters during startup• Idle mode after power failure, to protect module and hot runner system• Open Thermocouple and reversed Thermocouple detection• Self test on startup• CE certified (module only)
MMA-15 Temperature Control Module
We make things betterwww.mastip.com
MMA-15 Temperature Control Module
Single Zone Temperature Controller (MSA)• Uses standard MMA-15 modules• Supplied with 3m cable and mould end connectors• 10A rating
Multi Zone Temperature Controller (MMA)• Standard MMA cabinet configurations are 1 to 12 zones • Supplied with 3m cables and mould end connectors• 15A rating on all zones
TECHNICAL SPECIFICATIONS
Mains input power 240Vac / 50-60 Hz
Output current capability 15A
Thermocouple “J” and “K” type, selectable by DIP switch
User interface: output SV and PV LED
Temperature control range 0ºC to 537ºC
Temperature control accuracy ±1ºC
Thermocouple open detect Yes
Thermocouple reversed detect Yes
Start up self test Yes
Standby Mode Yes, selectable by DIP switch
Auto tune Once or every time (user selectable)
CE Compliant Module only
* Warranty: Four year warranty applies to the module only. The cabinet and cables are subject to the Mastip standard warranty clauses. Components which are subject to wear or which are damaged by misuse are not warranted. These items include temperature sensors, contact points, fuses, electro-mechanical relays and triacs. Units that have been modified by the buyer are not warranted. For further details refer to the standard Mastip warranty.
Mastip Regional Office North America Phone: +1 262 644 9400 Email: [email protected]
Mastip Head Office New Zealand Phone: +64 9 970 2100 Email: [email protected]
Mastip Regional Office Europe Phone: +33 0 809 400 076 Email: [email protected]
Mastip Regional Office China Email: [email protected]
40-0
02-0
11 |
V3.
02
©
Cop
yrig
ht M
astip
Tec
hnol
ogy
Lim
ited.
Info
rmat
ion
subj
ect t
o al
tera
tion.