Mobileye C2-270 Essentials

MobileyeAdvanced Driver Assistance Systems

A ground breaking collision avoidanceand mitigation tool

2

Contents

Mobileye ADAS

Mobileye EyeWatch

Mobileye Chip – SeeQ2®

System Components

Connectivity Scheme

System Specifications

3

4

5

6

10

11

3

Mobileye ADAS

Fits all types of trucks, buses, RVs and passenger cars.

Operates day and night in almost every weather condition.

Based on Mobileye's acclaimed vehicle, lane and pedestrian detection technologies that have been adopted by leading vehicle manufacturers.

Mobileye C2-270 Components● The Vision Sensor Unit with the

compact High Dynamic Range CMOS (HDRC) camera, Mobileye EyeQ2 chip, proprietary algorithms and audio alert that attaches to the inside of the vehicle’s windshield.

● The Multiple Angle Mounting (MAM) bracket to fit most vehicles.

● The user-friendly, high visibility EyeWatch display and control unit, for visual warnings and numerical headway measurement display, with control switches for customizing the system settings.

● The System Connections Hub and Power Supply Unit (PS3).

How does it work?

Mobileye intelligently analyzes inputs from a single smart camera, mounted on the inside of the vehicle's windshield, constantly monitoring the road ahead.

It provides the driver with critical real-time audio and visual warnings of unintended lane departures, imminent collisions, pedestrians, bicyclists and motorcyclists on the road.

Mobileye also has the ability to intelligently control high beams, and recognize various traffic signs.

4

Mobileye EyeWatch(the Mobileye Display Unit)

High Beams

Icon

Left Lane Marking Icon

Right Lane Marking Icon

Pedestrian Icon

Menu

Volume UpVolume Down/Mute

Vehicle Icon

Following Distance measure (in seconds)

Zero Speed Indication

(When the speed of the vehicle is zero,

the two bottom lines of the two digits are

turned on)

System On

Mute(blinking)

Functions and Icons

Note: In case of low visibility the EyeWatch icons will dim repeatedly.

5

Mobileye Chip – SeeQ2®

A single board Vision System Unit (VSU)- An advanced stand-alone camera and vision processing module.

Mobileye's SeeQ2® offers a compact and powerful processing platform for computationally intensive real time visual recognition and scene interpretation applications. The highly integrated SeeQ2 board includes the Mobileye EyeQ2™, an extremely powerful vision processor, a High Dynamic Range CMOS image sensor, Flash and SDRAM memories and all the additional components required for a standalone vision system: CAN and GPIO interfaces, protected power supply and expansion connector.

The VSU's compact dimensions (1.3 inches x 2.56 inches) allows for easy integration into the vehicle, such as at the base of the rear-view mirror.

The SeeQ2® board is based on Mobileye's EyeQ2™ vision system on a chip (VSoC) that runs Mobileye's range of driver assistance applications.

The Mobileye EyeQ2™ capabilities include Lane Detection and Road Geometry estimation, Vehicle Detection, Intelligent High-Beam Control, Traffic Sign Recognition and Pedestrian Detection.

The SeeQ2® board serves as the processing platform Mobileye C2-270.

How does it compare to competition?

Mobileye is the world leader in ADAS, with over 12 years of expertise and know-how in the field.

The company operates the largest artificial vision R&D center in the world.

Mobileye's unique technology is powered by its proprietary chipsetand algorithms, and works to mitigate andreduce the risk of collision.

Mobileye's breathrough innovation relies on its monocular vision-based platform, working on patterns recognition, thereby enabling accurate detections.

Mobileye is the only ADAS provider to offer a wide variety of aftermarket safety and convenience functions, all bundled on one device.

6

System Components

Vision Sensor Unit with connecting cable (Camera – with mounting bracket).

PS3 – (System Connections Hub and Power Supply Unit)

The vision sensor unit contains the camera and the main processor (EyeQ™) of Mobileye C2-270.It is easily attached to the inside of the vehicle’s windshield by the multi-angle mount (MAM) provided with the system. In Mobileye C2-270, the Vision Sensor Unit also includes a small built-in audio alert system.

The System Connections Hub (PS3) is used to connect all system components and vehicle wiring together.

CAB000080

ASY000069

7

Display and Control unit with connecting cable (EyeWatch)

Power Cable and External Fuse Holder

EyeWatch - Display & Control unit with connecting cable

ASY000057 (Cable only CAB000087)

CAB000086

8

Analog Signals Cable

CAN-B Cable

This cable connects to the vehicle's analog signals.If an analog installation is conducted, Mobileye C2-270 requires the following vehiclesignals as input:● Speed signal (VSS)● Right turn signal● Left turn signal● Brake light signal● Wipers signal● High Beams signal

The CAN-B Connector Cable connects to the vehicle's CAN interface in order to retrieve the digital Speed Signal (and if available through CAN, other required vehicle signals).The cable’s 2 wires (CAN High, CAN Low,) connect on one side to the vehicles CAN High and CAN Low wires and on the other side to the PS3 unit.

CAB000080

CAB000083

System Components

9

EyeCAN

M.A.M – Multiple Angle Mount (Camera windshield adapter)

Note: The EyeCAN cable kit is not part of the Mobileye C2-270 kit.It is purchased separately and used as one of the installation tools for calibration purposes and CAN sniffing. The EyeCAN Cable connects between the PS3 unit and a laptop computer for calibration purposes and software upgrades.It is connected to the PS3 unit at the end of the installation process and it is removed once the calibration process has been completed and a test drive has been successfully executed.

The MAM is an adjustable camera mount for all vehicle types. It enables the installer to quickly adjust the camera’s angle according to the vehicle’s windshield angle without the need to use different camera mounting adapters.

ICAN000001

Kit Mobileye C2-270 including MAM: C227000U0M

10

Connectivity Scheme

The following scheme demonstrates all the different components of the C2-270, and the way they connect to each other.

11

Mobileye C2-270 Specifications

Mobileye's 10 competitive points

1. 12 years of expertise

2. Implemented in leading OEMs and safety conscious fleets

3. Third generation aftermarket product

4. Several critical functions in one single product

5. Easily installed and deployed

6. Powerful proven technology

7. Protected IP

8. International recognition

9. High quality assurance standards and processes

10. No maintenance required

Vision sensor field of view: 37 degrees Typical vehicle detection range: 262 feet Input Voltage: 12 – 24VdcOperating Temperature: -31F to 176FReal-time image processing at 15 FPS running on Mobileye’s EyeQ2® vision system on chipAdjustable volume and display brightness*Adjustable Urban Forward Collision Warning*Adjustable Pedestrian Collision Warning sensitivity*Adjustable Lane Departure Warning sensitivity*Adjustable timing of Headway (Following Time) Monitoring and Warning audio and visual alerts*Activation and de-activation of Intelligent High Beam Control Automatic notification upon partial or non availability conditions, such as low visibilityHigh availability, including in inclement weatherData interface options: CANbus,j1939,RS485Vehicle signal inputs (CANbus or analog): brakes, turn signals, speed, wipers and high beams

* Can be locked at fleet-specified settings during installation.

Mobileye Inc.100 Shames Drive Suite 2BWestbury NY 11590 USATel: 877-867-4900 www.mobileye.com

Our Vision. Your Safety.™