Model - Plapla.com.ar/site/imagenes/productos/pulverizadoras/CR/35208 (191114... · Model Machine...

Model

Machine serial number

Engine serial number

Date of delivery

Owner

PLA is pleased to thank you for trusting our manufactured machines and renews its commitment improving both the performance and the operative safety of the machines.

The design of the machine you have just bought follows PLA’s indus-trial philosophy: permanent renewal and improvement of our manufac-turing process, and mainly of our PLA machinery line.

In order to take genuine advantage of the perfomance of this ma-chine, and before working with it, we suggest that you should read the Operator’s Manual thoroughly which is also available with this Cata-logue of Spare Parts at: www.pla.com.ar.

You will find a guide to its operation under different work conditions, to its maintenance, transport, and conservation, and to warnings and re-quirements related to the operator’s and third parties’ personal security, and also the environment.

The Operator’s Manual complements the training received upon de-livery of the machine. In case you need to receive any additional infor-mation or make any suggestions, please call US: 0810 4444 752.

The Catalogue of Spare Parts includes precise and specific informa-tion regarding the spare parts which integrate your equipment. With-out prejudice to our policy to improve our products permanently, PLA reserves its right to introduce modifications. It does not imply any obli-gation on previously manufactured products. Thus, the content of this Catalogue of Spare Parts is updated upon its printing, and modifications without prior notice may occur.

However, you will be able to find all updated versions of the Cata-logue of Products and the Operator’s Manual at www.pla.com.ar.

You should write down or remember the information about the iden-tification of your machine. In order to provide you with a prompt re-sponse, we suggest that you should write that information on the chart below in case you need spare parts or technical assistance.

Please contact us:PLA S.A. / Santa Fe 419 / S2520CZI Las Rosas / Santa Fe /

ArgentinaTelephones: (54) 3471 451655 / Fax: (54) 3471 451618

Direct Line: 0810 4444 752 / Spare Parts: (54) 3471 450218Or visit www.pla.com.ar for an updated list of Professional Assistants

Index

1 - CAB, COMMAND AND ACCESS Cab (components) .................................................................................. 1 - 3 Cab (accessories and instruments) ........................................................ 1 - 5 Air conditioning equipment (cold and heater) ......................................... 1 - 7 Cab (brake pedal and steering column) .................................................. 1 - 9 Fairings, ladder and footbridges ............................................................ 1 - 11 Electric circuit ........................................................................................ 1 - 13 Lights, beacons and night kit ................................................................ 1 - 15

2 - CHASSIS Chassis ................................................................................................... 2 - 3 Central boom (support) .......................................................................... 2 - 5 Boom (fixed) ........................................................................................... 2 - 7 Boom (tilting) .......................................................................................... 2 - 9 Pneumatic system ................................................................................ 2 - 11

3 - PROPULSION Admission, exhaust, intercooler and fuel tank ....................................... 3 - 3 Engine cooling system ........................................................................... 3 - 5 Differential and rear axle (TVM) .............................................................. 3 - 7 Rear drop box ......................................................................................... 3 - 9 Front axle and steering system ............................................................. 3 - 11 Front axle and wheels set ..................................................................... 3 - 13

4 – HYDRAULIC SYSTEM Hydraulic system tank ............................................................................ 4 - 3 Hydraulic system I .................................................................................. 4 - 5 Hydraulic system II ................................................................................. 4 - 7 Hydraulic pumps 38 and 52 L. Suction filter .......................................... 4 - 9 Steering unit .......................................................................................... 4 - 11

5 – SPRAYING SYSTEM Main tank (inlets) .................................................................................... 5 - 3 Centrifugal load pump (disassemble) (optional) ..................................... 5 - 5 Main tank (outlets) ................................................................................. 5 - 7 Auxiliary tank .......................................................................................... 5 - 9 Chemical inductor, product pump and filters ........................................ 5 - 11 Sprayer pump (disassemble) ................................................................. 5 - 13 Main and second side boom and outer breakaway ............................... 5 - 15 Sections shut-off and spraying line (central boom) ............................... 5 - 17 Spraying line (main side boom) ............................................................. 5 - 19 Spraying line (second side boom and outer breakaway) ....................... 5 - 21

1 - 2MAP II 2850 - November 2014

5

6

27

28

2625

24

22

23

18

7

17

16 15

12

13

14

10

11

8

219

1

4

2

2

3

2019

MAP II 2850 - November 2014 1 - 3

Nº ref. Name Code SAP Nº ref. Name Code SAP Nº ref. Name Code SAP

Cab (components)

1 ARMORED CUT OFF CURRENT 30850

2 BATTERY WIRE SET - 3500 H 17205

3 BATTERY 12V X 160 AH THERMOSEALED 17362

4 HEXAGON HEAD BOLT W ½” X ¾” 13004

5 ROOF COVER w/o code

6 PMV 2250 REAR BOOM USA CAB 34753

7 LEFT REAR GLASS 14223

RIGHT REAR GLASS 14222

8 DOOR BUMPER CYLINDER 13843

9 PMV CAB DOOR HANDLE 16806

10 LEFT MIRROR DOUBLE VISION PL03-4563-00 35058

RIGHT MIRROR DOUBLE VISION PL03-3144-00 29413

11 LEFT MIRROR SUPPORT (PMV7177) 34640

RIGHT MIRROR SUPPORT (PMV7178) 34639

12 RIGHT LATERAL GLASS 14171

LEFT DOOR GLASS 14187

13 FIXING SUPLEMENT 16776

14 FIXING NUT 16774

15 LOCKING SCREW 16775

16 WIND EXCLUDER 15032

17 DOOR DRAWER w/cód.

18 UNDER CABIN EXCLUDER 15123

19 HEX HEAD BOLT NF 9/16”X 3”1/2 W/D. FLAT WASHER AND SELF-LOCK. NUT 13030

20 YELLOW PAD SET 15012

21 PASSENGER’S SEAT (P002386-RO) w/o code

22 RUBBER CARPET 15124

23 WINDSCREEN GLASS 14192

24 WINDSCREEN WIPER 17336

25 WINDSCREEN WIPER ARM 17337

26 WINDSCREEN WIPER ENGINE 17335

27 RETRACTABLE SUNSHADE w/o code

28 SIDE CAB COVER 14239


BLAUPUNKT

MELBOURNE C34

9

21

16

158

1

2

3

4

5

6

10

Off On

HEATH

18

20

RAVEN

19

B C D

IV

I II

V

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

A

21 22PARE MOTOR TUNEL DE VIENTO

REFLEC.LATERALES

15 15

STOP REFLEC.MEDIO

REFLEC.TUNELVIENTO

DESTELLADOR LUZ BAJA

BOCINA REFLEC.ALAS

LIMPIAPARABRISA

GIROSBALIZAS

ENCENDEDORL.INTERIOR

RADIO

REFLEC.LATERLALES

PRESURISADOR

ALIMENTACIONCONSOLA

DIFERENCIALALTA-BAJA

REFLECTORTECHO

COMPUTADOR

TECLAS

TABLEROINSTRUMENTO

AIRE

15 15 15

15 1525

30 10 25

10

10 10 10

1515

STOP

III

VI

16

17

18

19

20

E FREFLEC.TUNELVIENTO

REFLEC.TECHO

LUZ ALTATROMPA

AIREACONDICIONADO

LUZBAJA

ACONDICIONADOLUZ ALTATROMPA

15

15

15

3000 GEN

BOCINA REFLEC.MEDIO

POSICION REFLEC.ALAS

REFLEC.TUNELVIENTO

15

15

DIAGNOSTIC

TRABAJO

ORLAN ROBER

1112 1614

ORLAN ROBER

V LL1/2

P

2

4 8

10

20

6

75100

150

25

50

0

37

3.6

5.840

12080

TEMPERATURA

SINO

13

1412

17

11

29

30

31

2324

25

22

32

33

125

7

28

27

26

MAP II 2850 - November 2014 1 - 5

Nº ref. Name Code SAP Nº ref. Name Code SAP

Cab (accessories and instruments)

1 FUEL LEVEL GAUGE 18030

2 VOLTMETER INDICATOR 18032

3 4 LED INSTRUMENT 27861

4 5 LED INSTRUMENT 27859

5 MECHANICAL MANOMETER (PNEUMATIC SYSTEM) 27860

6 PLUS ONE SAUER DANFOSS w/o code

7 MOBILE AIR CONDITIONER DIFFUSERS w/o code

8 A.C. COMMAND BOARD (CAB) 27869

9 5 KEY COMMUTATOR 17248

10 UNIVERSAL SUPPORT 161854

11 RAVEN ENVIZIO PRO w/o code

12 PUMP CONTROL BOARD 17894

13 STEREO RADIO WITH CD PLAYER 17446

14 HYDRAULIC CONTROL MODULE 33650

15 CAB CEILING LIGHT 17903

16 VARIABLE TRACK WIDTH NISER CONTROL 30298

17 FUSE HOLDER BOARD belongs to set 19025

18 STEREO RADIO ANTENNA 17371

19 ISRI SEAT FULL (P002594-RO) w/o code

20 6” LOUDSPEAKERS KIT 17447

21 CONSOLE 2 w/o code

22 ECO CONSOLE WITH ELECTRONIC HAND ACCELERATOR 34304

23 GENTEC ELECTRONIC HAND ACCELERATOR F/ECO CONSOLE 34307

24 3 POINT CARLING BUTTON W/O RETENTION 34305

25 BASEBOARD FOR CARLING BUTTON 34306

26 START ENGINE KEY 28422

27 MULTIFUNCTION KEY 17453

28 FOOT ACCELERATOR WILLIAM WM 526 34308

29 ALLISON BOARD 33368

30 CUMMINS BOARD 33535

31 PARKING BRAKE BOARD/12 V OUTLET w/o code

32 HEATING CONTROL w/o code

33 MODULE INHIBITOR HAND ELECTRIC THROTTLE FOR BRAKING 34551


1

4

2

10

7

6

3

21

25

15

2326

28

29

27

24

22

16

9

11

12

13

5

8

14

20

19

17

18

MAP II 2850 - November 2014 1 - 7

1 RECIRCULATING GRID 34969

2 ACTIVATED CARBON FILTER PMV PLA MAP 34970

3 ACTIVATED CARBON FILTER PMV PLA MAP CONTAINER 34968

4 CONDENSER CHASSIS 34934

5 CONDENSER 34935

6 KIT CONDENSER ASSEMBLY 34930

7 PLASTIC AIR CHANNEL 34927

8 FAN 12V Axial Motor Fan Cross ref: DCM Texdyne PN: TA12A3001 34926

9 OUTPUT PIPE ADDITIONAL CONDENSER 34936

FAN WIRING HARNESS 34937

10 5/16” HOSE (0,63 m) 34992

11 ASSEMBLY HOSE 5/16” (7,70 m) 34996

12 ASSEMBLY HOSE 13/32” (1,50 m) 34997

13 ASSEMBLY HOSE 1/2” (7,70 m) 34626

DISCHARGE HOSE 34978

DISCHARGE “T” 34979

RELAY PLASTIC COVER 34983

HEATER HOSE 1/2” 34985

14 CORRUGATED HOSE 2” 34980

15 DOUBLE AXLE MOTOR ref: DCM Texdyne PN: TA0030003 34975

16 COIL/PANEL EVAPORATOR 34971

EVAPORATOR WIRING HARNESS 34977

17 COVER EVAPORATOR PLASTIC BOX 34974

18 EVAPORATOR PLASTIC BOX 34973

19 DRYER FILTER 34933

20 FILTER CLAMP 34931

21 BINARY SWITCH 34928

22 SHORT CAPILLARY THERMOSTAT (Mechanical) 34984

23 RELAY CONNECTOR 34932

24 RELAY 34929

25 3 SPEEDS KEY 34946

26 PLASTIC KNOBS 34942

27 ELECTRONIC THERMOSTAT 34939

28 EXPANSION VÁLVE BLOCK (Refrigerant R134A) 34976

29 HEATER ELECTROVALVE 33637

Nº ref. Denominación Código SAP Nº ref. Denominación Código SAP

Air conditioning equipment (cold and heater)


513

1

2

4

8

13

15

13

19

24

24

21

22

20

20

10 13

13

17

18

25

25

14

3

6

9

7

8

11

12

13

23

13

14

1416

14

MAP II 2850 - November 2014 1 - 9


Cab (brake pedal and steering column)

1 PEDAL COVER HOUSING 14228

2 PEDALS SUPPORT w/o code

3 PEDAL ROD BOLT 14230

4 BRAKE PEDAL SET 14231

5 PEDAL PUSHER ROD 14233

6 ROD BELLOWS w/o code

7 BOOMERANG 10338

8 BOOMERANG BOLT (PMV) w/o code

9 BRAKE PUSHER RG 14236

10 PUSHER (PMV) w/o code

11 FOOT VALVE WITHOUT PEDAL 14912

12 STOP BULB 17685

13 QUICK COUPLING QSL - 3/8” - 8 (art. 153050) 27478

14 FLEX HOSE 8 X 1.25 - BL (art.159666) 35108

15 DISCHARGE VALVE 14914

16 FILTER REGULATOR 14942

17 SERVICE CHAMBER 14993

18 COUPLING 27471

19 DUAL CIRCUIT CYLINDER 14955

DOUBLE PUMP REPAIR KIT (L6410) 35192

20 COPPER PIPE 3/16” 14831

21 STEERING WHEEL WITH COVER AND EMBLEM 17366

22 ONE MOVE STEERING COLUMN 18180

23 MALE T. QUICK COUPLING M 16 x 1.5 - FEMALE T. 3/8” NPT 27887

24 PLAIN WASHER (KE-0061) 35267

25 CONNECTOR M14 X 1.5 TO 3/8 X 24 UNF 35245

1 - 10MAP II 2850 - November 2014

9

33

4

28

13

11

14

32

34

12

6

3

7

16

15

34

12

31

5

29

8

10

34

17

19

27

26

24

24

21

23

23

20

30

25

18

22

24

35

34

MAP II 2850 - November 2014 1 - 11


Fairings, ladder and footbridges

1 ENGINE COVER KIT 2850 BT USA 28772

2 BLIND RUBBER RING 15121

3 PMV COMPLETE TOOLBOX 14245

4 RIGHT FRONT HANDRAIL SET 161336

5 RIGHT FRONT FOOTBRIDGE WELDED SET HIDRO 162492

6 RIGHT CENTRAL HANDRAIL SET 161339

7 RIGHT FOOTBRIDGE WELDED SET HIDRO 162493

8 RIGHT REAR HANDRAIL SET 161329

9 RIGHT REAR FOOTBRIDGE WELDED SET 162532

10 REAR FOOTBRIDGE WELDED SET HIDRO 162486

11 LEFT REAR HANDRAIL SET 2500/2850 161326

12 LEFT REAR HANDRAIL WELDED SET 2850 (2012) 162534

13 LEFT FRONT FOOTBRIDGE WELDED SET HIDRO 162490

14 LEFT FRONT FOOTBRIDGE SET SHORT HIDRO 162491

15 LEFT FRONT SMALL HANDRAIL SET (TDS) 161333

16 LEFT FRONT SMALL HANDRAIL SET (TDS) 162489

FIX LADDER ASSEMBLY SET 2850 (2013) 162535

17 LADDER CYLINDER C = 330 mm 29390

18 SHORT CONNECTING ROD SET 161262

19 LONG CONNECTING ROD SET (NEW LADER) 35041

20 FIXED LADDER SET 2850 (2012) 162536

21 HANDRAIL SET FOR LOW-HIGH LADDER (TDS) 161272

22 MOBILE LADDER SET 2850 (2012) 162537

23 HEX BOLT W ½ X 1 ½ G5 ZINC PLATED 13008

FLAT WASHER ½ ZINC PLATED 13564

ZINC PLATED SELF-LOCKING NUT ½ W G°5 13071

24 ZINC PLATED HEX BOLT W 5/8 X 2 ½ G5 13118

25 ZINC PLATED HEX BOLT W 5/8 X 2 ¾ 13458

26 ZINC PLATED HEX BOLT W 5/8 X 4 ¼ G°5 23299

27 ZINC PLATED HEX BOLT W 5/8 X 4 G5 13123

ZINC PLATED FLAT WASHER 5/8 13566

SELF-LOCKING NUT 5/8 W G°5 12957

28 FRONT FOOTBRIDGE WELDED SET HIDRO 2012 162526

29 HEX BOLT W 3/8 X 1 ¼ G5 ZINC PLATED 12976

30 LADDER RUBBER STOP FULL 30010

31 LEFT SIDE FLAP (2005) 14242

32 RIGHT SIDE FLAP 14241

33 REAR COVERING MAX LINE 14116

34 SCREW ¼ 14 X 38 HWH KWIK WITH WASHER 12928

35 SPRAYING BOARD SET 2500/2850 161278

1 - 12MAP II 2850 - November 2014

8

9

10

MAP II 2850 - November 2014 1 - 13


Electric circuit

1 CAB INSTALLATION (P000381-RO) 17740

GENERIC HARNESS CHASSIS V2 30010068MV 33877

2 CHASSIS INSTALLATION (ENGINE SECTOR) belongs to set: 33877

3 CHASSIS INSTALLATION (FUEL SECTOR) belongs to set: 33877

4 CHASSIS INSTALLATION (REAR SECTOR) belongs to set: 33877

5 CHASSIS INSTALLATION (TANK ENGINE SECTOR) belongs to set: 33877

6 CHASSIS INSTALLATION (COLUMN) belongs to set: 33877

7 REAR BOOM INSTALLATION 17550

8 HIDRAULIC ASSEMBLY WIRE 33652

9 E.C.U. CHASSIS 17786

10 HYDRAULIC VARIABLE GAUGE HARNESS (RULES NOT INCLUDED) 17837

1 - 14MAP II 2850 - November 2014

21

34

5 8

7

6

11

13

12

10

9

MAP II 2850 - November 2014 1 - 15


Lights, beacons and night kit

1 HELLA UNIDIRECTIONAL FLOODLIGHT (P000379) 17948

2 HELLA WIDE ANGLE FLOODLIGHT (P000380) 17949

3 ROTATING BEACON 17409

4 WORK HEADLIGHT VIC 17909

5 LEFT REAR HEADLIGHT HOLDER REAR BOOM 14190

RIGHT REAR HEADLIGHT HOLDER REAR BOOM 14191

6 ROUND REAR WHITE HEADLIGHT 17695

7 ROUND REAR YELLOW HEADLIGHT 17696

8 ROUND REAR RED HEADLIGHT 17693

9 VIC WIDE ANGLE HEADLIGHT 17907

10 15 W ROUD HEADLIGHT (NIGHT KIT) 17851

11 VIC 684 HEADLIGHT 17852

12 VIC 375 RIGHT HEADLIGHT 30206

VIC 375 LEFT HEADLIGHT 30207

13 FRONT HEADLIGHT (HIGH BEAM) 30226

14 FRONT HEADLIGHT (HIGH/LOW BEAM) 30227


1

2

5

4

36

7

9

10

8

11

15

12

16

17

18

15

13

14

MAP II 2850 - November 2014 2 - 3


Chassis

1 HEX BOLT W 5/8 X 1 ¾ G°5 WITH SELF-LOCKING NUT 13113

2 FRONT CROSSING SET 164771

3 REAR LEG RIGTH QSB 4.5 34316

4 REAR LEG LEFT QSB 4.5 34217

5 GOLD PLATED HEX BOLT W ½ X 1 G5 WITH GROWER WASHER 13005

6 CHASSIS REAR LOWER CROSSING SET 161580

7 WELDED CHASSIS SET BT TVML L: 2,80 TO 3,20 165104

8 CHEMICALINDUCTORSUPPORTWELDEDSET(optional) 160944

9 SPRINGTOBLOCKINDUCTORSUPPORT(optional) 14357

10 STAPLETOFIXMOTOPUMP/INDUCTORSUPPORT3250(optional) 28537

CHEMICALINDUCTORSUPPORTCOMPLETEASSEMBLEDSET(optional) 160945

(includes ítems 7, 8 and 9)

11 LONG EXTENSION JACK CILINDER 165096

12 JACK CILINDER 3”x 305 x 45 11279

13 SHORT EXTENSION JACK CILINDER 165097

14 CROSSING FOR JACK AND EXTENSION SUPPORT 165343

15 “R” COTTER 4 x 80 13617

16 JACK PIN DOUBLE COTTER 12839

17 BOTTON PIN JACK 18938

18 FOOT JACK 18827

19 LEFT REMOVABLE SUPPORT (SERIE 2) 162579

20 RIGHT REMOVABLE SUPPORT (SERIE 2) 162580


5

6

7

89

11

10

1

4

2

3

MAP II 2850 - November 2014 2 - 5


Central boom (support)

1 GOLD PLATED FLAT WASHER 1” 13569

2 SPLINT 6 X 50 DIN 1481 13625

3 BOOM LIFT CYLINDER BOLT 19804

4 CENTRAL BOOM FIXED FRAME SET 161736

5 QUICK PIN 6 X 6 X 50 mm 21167

6 BOOM SECURE BOLT 18866

7 GOLD PLATED HEX BOLT NF 5/8 X 7 ½ G5 13034

8 SELF-LOCKING NUT 5/8 NF G°5 HIGH WITH FLAT WASHER 13078

9 SPECIAL SCREW REAR BOOM 3000 13286

10 GOLD PLATED HEX NUT 5/8 NF HIGH G1°5 WITH FLAT WASHER AND GROWER 13057

11 LIFT BOOM CYLINDER REAR 3” x 1530 11319


24

23

16

17

22

21

20

19

18

9

10

2

1 11

13

12 13 14

2

15

8

7

65

4

2

3

1

MAP II 2850 - November 2014 2 - 7


Boom (fixed)

1 HYDRAULIC CYLINDER BOLT 12870

2 SPLINT DIN 1481 6 X 36 13624

3 ADAPTER (700) 741 – 4 – 4 11712

4 TILTING BOOM LOCK CYLINDER REGULATOR 11360

5 GOLD PLATED HEX BOLT W 3/8 WITH GROWER WASHER 12975

6 TILTING BOOM CYLINDER 2 x 210 mm 11293

7 TILTING BOOM LOCK LONG GRILON 20013

8 COUNTERSUNK SCREW ¼ x 1 ¼ G°5 W/ HEX NUT AND GROWER WASHER 13300

9 TILTING BOOM LOCK SHORT GRILON 20014

10 BOOM SECURE HOOK 107034 10819

11 BOOM LIFT CYLINDER BOLT 19804

12 GOLD PLATED FLAT WASHER 1 13569

13 SPLINT 6 x 50 DIN 1481 28383

14 TILTING BOOM ASSEMBLED WELDED SET 2850 150934

15 LOCK HOOK PIVOT BOLT Ø 19 x 175 12874

16 HEX NUT NF 5/8” W/ FLAT WASHER AND GROWER WASHER 13057

17 HEX BOLT 5/8” x 5” NF W/ FLAT WASHER 13125

18 RUNNERS GRILON PLATE 125 X 180 mm 19963

19 COUNTERSUNK SCREW ¼” x 1” W/NUT, FLAT AND GROWER WASHER 13357

20 LEADING PIPE 60 x 60 x 5 154171

21 GUIDE PIPE GRILON PLATE 50 x 100 mm 19965

22 COUNTERSUNK SCREW ¼” x ¾ 13356

23 FIXED BOOM REAR COVER 10259

24 BOOM GUIDE DIVIDING PLATE 20730


1

2

3 7

8

9

10

1112

13

14

15

16

17

18

22

20

19

21

232124

25

26

27

24

34

37

35

36

34 3529

28

2928

31

32

30

33

5

64

MAP II 2850 - November 2014


2 - 9

Boom (tilting)

1 TILTING REAR BOOM WELDED FIXED SET 151900

2 TILTING BOOM CAST IRON CONNECTING ROD 18825

3 CONNECTING ROD BOLT Ø 30 x 145 28625

4 SPLINT 6 x 50 DIN 1481 28383

5 CURVED GREASE NIPPLE 90° 1/8” BSP 13643

6 SPRAYING FIXING PLATE 152657

7 GOLD PLATED HEX BOLT W 3/8 x ½ G5 12985

8 SELF-LOCKING NUT W 3/8 13069

9 COUNTERSUNK SCREW ¼ x ¾ W G°5 13356

10 UPPER FRICTION PLATE 19818

11 COUNTERSUNK SCREW ¼ x ¾ W G°5 W/ GROWER WASHER AND NUT 13356

12 ELASTOMER FRONT BUSHING 19803

13 SELF-LOCKING NUT HIGH 5/8 NF G°5 13078

14 GOLD PLATED FLAT WASHER 5/8 13566

15 SECURE BOOM SUPPORT 153726

16 GRILON PLATE 13927

17 ELASTOMER REAR BUSHING 19802

18 TILTING BOOM GRILON PLATE 159835

19 REAR BOOM BOLT SUPPORT 12908

20 FLAT WASHER ¾” 13567

21 SELF-LOCKING NUT ¾ NF G°5 13079

22 ZINC PLATED HEX BOLT NF ¾ x 4 G5 WHITE 13136

23 FORGED BALL JOINT M 25 x 1,5 W/ STRAIGHT GREASE NIPPLE ¼” 18558

24 SHORT GOLD PLATED HEX NUT M25 x 1.5 G°5 13402

25 BOOM OPENING CYLINDER 2” ½ x 408 mm 30795

26 ELBOW 90° (900) 941-4-4 1.00 mm +/- 0 11974

27 CYLINDER ROD COUPLING M 25 20969

28 THREADED CLOSURE 20970

29 SYSTEM CLOSURE 20971

30 CENTERING ROD 20972

31 CROSSHEAD BUSHING 20748

32 CENTERING SUPPORT SECURE 20745

33 ALLEN BOLT 3/8” x 1”1/2 13291

34 ELASTOMER CENTERING BUSHING BOOM SPRINGS 20779

35 CENTERING SPRING 20747

36 STRAIGHT GREASE NIPPLE ¼” NF 13640

37 CROSSHEAD F/TILTING BOOM SPRINGS 20742

2 - 10MAP II 2850 - November 2014

5

11

13

6

2 3

12

42

1

8

4

6

15

7

14

10

18

16

19

20

21

7

24

23

25

36

5

40

32

34

31

30

33

37

29

28

27

30

39

38

26

35

37

30

36

39

6

6

6

17

21

41

5

5

5

5

22

7

5

7

9

10

MAP II 2850 - November 2014 2 - 11


Pneumatic system

1 SYNTHETIC FIBER SLING (370 mm) 28663

2 SEPARATING BUSHING (LENGTH 37) 154075

3 HEX BOLT NF 9/16 x 3 ½ G5 GOLD PLATED WITH SELF-LOCKING NUT 13030

4 DAMPER 10438/6 PP 650 KG. SACHS (FRONT) 18471

DAMPER 10437/6 PP 1085 KG SACHS (REAR) 18472

5 QUICK COUPLING MALE ¼” – 18 NPT TBO 0 8 14790

6 TECALAN HOSE 0 8 mm EXT. 0 6 INT. 14794

7 QUICK COUPLING MALE ¼” – 18 NPT – TUBE 08 14789

8 FERVIAIR AIR SPRING 06 – 4720 RAC 14743

9 HEIGHT CONTROL VALVE REAR 0500050 W/EXTENSION 14746

10 HEIGHT CONTROL VALVE EXTENSION 07-0330 14748

11 MANOMETER 50 mm – 10 KG 14703

12 POLYAMIDE PIPE 154185

13 QUICK COUPLING “T” TUBE 0 8 14792

14 LEFT HEIGHT CONTROL VALVE 050130 W/EXTENSION 14745

15 LEVEL CONTROL VALVE FRONT RIGHT 050220 W/CONNECTOR 14730

16 AIR TANK 14716

17 MANUAL DRAIN VALVE 25/85380 14722

18 ADAPTER (700) 741-10-12 11981

19 AIR VALVE W/PARKER FILTER 06F31AC1 14787

20 HOSE NIPPLE ¼” 10101-04-04 22033

21 AIR DISTRIBUTOR 14723

22 SAFETY VALVE (434-608-205-0) 14784

23 ADAPTER ½” – 14 NPT 22120

24 GOVERNOR VALVE NIPPLE HEIGHT 14739

25 HOSE ½” R2 X 2000 HG-HG (UNF7/8JIC37Ñ) 11834

26 CUMMINS AIR COMPRESSOR TUBE 14761

27 REDUCTION BUSHING (3924146) 22094

28 ELBOW THREAD/TUBE (3923548) 22093

29 HOSE CONNECTOR ¾” 3924632 22090

30 ELBOW HOSE CONNECTOR (3357407) 22095

31 LONG REFRIG. HOSE (CUMMINS 3356417) 22079

32 STUD (3903210) 22088

33 FLEXIBLE REFRIG. HOSE (3924867) 22081

34 CUMMINS AIR COMPRESSOR 152 (3357107) 22082

35 ADAPTER (700) 741-10-12 11981

36 ELBOW w/o code

37 COUPLING w/o code

38 HOSE w/o code

39 COUPLING w/o code

40 GOVERNOR VALVE 28723

41 QUICK COUPLING ACM 1/4” 10102-04-04 22032

42 REDUCTION Ø 8 TO Ø 6 28374


3

18

4

6

7

13

15

8

11

2

1

5 9

12

10

14

16

17

18

18

MAP II 2850 - November 2014 3 - 3


Admission, exhaust, intercooler and fuel tank

1 RADIATOR SET QSB 33649

2 INTERCOOLER INLET PIPE QSB 4,5 33631

3 INTERCOOLER OUTLET PIPE QSB 4,5 33630

4 COOLANT TANK 34276

5 DEUTZ EXHAUST TUBE 6 TURBO 30128

6 MUFFLER 30127

7 EXHAUST PIPE FIRST STRETCH QSB 4,5 31439

8 EXHAUST CLAMP 3” 13727

9 FIXATION CLAMP 29143

10 FUEL TANK HOLDER 29141

11 RUBBER 5 x 25 mm 29145

12 ROTOMOLDED FUEL TANK W/INSERTS 29147

FUEL TANK FLOATING FT-540 (NO ILLUSTRATED) 31436

FUEL TANK CAP (NO ILLUSTRATED) 32688

13 AIR FILTER INLET TUBE 20545

14 ADMISSION HOSE 90° FILTER TUBE TO ENGINE D6T (4 - 5”) 21362

15 ADMISSION PIPE 35247

16 ADMISSION HOSE 90° FILTER TUBE TO ENGINE D6T (3 - 4”) 15098

17 SUPPORT COOLANT TANK CUMMINS 165425

18 WATER RADIATOR CONNECTION 34415


1

4

26

22

25

22

22

2330

24

15

14

13

29

3

6

7

28

28

28

21

20

19

8

31

2

9

5

27

29

18

10

2828

11 12

16

17

MAP II 2850 - November 2014 3 - 5


Engine coolying system

1 RADIATOR SET QSB 6.7 - 173 HP 33649

2 RADIATOR AND INTERCOOLER ASSEMBLY 159836

3 ENGINE PAD SUPPORT SET (YELLOW) SH-A-75 15012

4 FRONT LATERAL SUPPORT QSB (RIGHT) 166073

ALLEN BOLT M12 X 1.75 X 40 G12.9 (W/FLAT WASHER) 13208

EXAG. NUT M14 X 2 Gº5 ZINC (FOR STUD) 13248

5 FRONT LATERAL SUPPORT QSB (LEFT) 166090

6 FIX PLATE PUMP (RIGHT) 35008

ALLEN BOLT M12 X 1.75 X 50 10.9 (W/FLAT WASHER) 29214

7 FIX PLATE PUMP (LEFT) 35009

8 HYDRAULIC PUMP PLATE 20863

9 CROSSING FIX PUMP PLATE 35007

10 COMMAND TUPAC 11491

11 RUBBER STAR 11596

12 TUPAC HUB (ENGINE SIDE) 34563

13 CUMMINS PULLED 34099

14 DISTANCER BOLT 35145

15 CUMMINS FAN DIAM. 25” 33343

16 AIR COMPRESSOR AC (SD-508) TECNOREF/ELECT 17466

17 A.C. COMPRESSOR SUPPORT CUMMINS QSB 165706

18 A.C. BELT 31438

19 RADIATOR WATER HOSE CONNECTION 34415

20 ENGINE WATER HOSE CONNECTION 34416

21 WATER OUTLET QSB 4.5 33632

22 ELBOW WATER INLET 27354

23 ENGINE WATER INLET QSB 33867

24 HOSE WATER COOLER QSB 4.5 33869

25 “T” BYPASS TERMOSTATER 34289

26 OIL COOLER ALLISON 35359

27 RADIATOR AND INTERCOOLER SUPPORT QSB 4.5 30908

28 BOLT 1/2” x 1”3/4 NF G5 CINC (2 PLAIN WASHER, GROWER AND NUT) 34698

29 ALLEN BOLT M 12 x 1,75 x 50 G1 29214

30 ALLEN BOLT M 12 x 1,75 x 40 G1 13208

31 EXG NUT M 14 X 2 G5 CINC 13248


16

2526

9

23

8

9

10

7 17

24 10

2

27

10

22

3

12

20

2113

14

18

19

18

15

14

16

4

5

9

11

MAP II 2850 - November 2014 3 - 7


Differential and rear axle (TVM)

1 REAR AXLE SET MVTL R38 166119

2 GRILON REGISTER 154280

3 GUARD TAP (THREAD) 18838

4 GUARD TAP 10483

5 BOLT ALLEN W 3/8” X 3/4” G10 13209

6 REAR TRANSVERSE TENSIONER SET 165222

7 TENSIONER BALL JOINT RIGHT THREAD 29841

8 TENSIONER BALL JOINT LEFT THREAD 29842

REAR TRANSVERSE TENSIONER MVTL 34010

9 SELF-LOCKING NUT 1” NF 13098

10 BOLT F/BALL JOINT 19461

11 REAR TENSIONER SET MVTL 165210

REAR TENSIONER MVTL 33988

12 EATON DIFFERENTIAL 19050 1 GEAR R: 7.17 33884

13 DIFFERENTIAL HUB LONG AXLE SHAFT 160050

DIFFERENTIAL HUB SHORT AXLE SHAFT 160049

14 CROSSHEAD CZ-113 (STAHL) 14418

15 STEERING BAR SET FEMALE EXTENSIBLE MVT 160051

16 STEERING BAR SET MALE EXTENSIBLE MVT 160052

17 DAMPER 10437/6 PP 1085 KG. SACHS 18471

18 METALLIC CLAMP (80-100) 13704

19 RUBBER BELLOW UNIVERSAL JOINT 15099

20 SELF-LOCKING NUT 3/8 NF G°5 13070

21 CLAMP 23614 14412

22 SCREW X - 8 – 699 14413

23 BALANCED STEERING BAR ALLISON QSB 4.5 33658

24 TENSIONER TVM 18909

25 STUD FIX DIFERENTIAL TVM 27648

26 NUT 3/4” NF CINC 13058

27 GROWER WASHER 3/4” 13586


2

4

39 40

38

7

8

4110

13

11

12

18

17

19

5

3

1

6

9 11

9

43

42

15 14

16 20

21

22

23

27

29

30

33 31

36

34

24

2528

32

30

3137

35

26

47

46

44

45

MAP II 2850 - November 2014 3 - 9


Rear drop box

1 REAR RIGHT DROP BOX SET LVMT 165125 2 REAR LVEFT DROP BOX SET LVMT 165130 3 CYLINDER31/2X200(TRACKOPENING)(optional) 11297 4 SCREW TOP MALE ¾” GALV. 16907 5 CASTLE NUT 2” NF G°5 75 MM 13099 6 COMMON SPLINT 5 X 90 13657 7 LOWER GEAR Z=30 28554 8 REAR HUB JOINT MOD MIM 200 19705 9 BEARING SKF-32216-20 27763 10 REAR HUB AXLE SHAFT 27466 11 AXLE GASKET 100- HEIGHT 13 – LX NBR 27764 12 HEX BOLT W 5/16 X 1 G5 GOLD PLATED 12937 13 BOLT RETENTION 10386 14 HEX BOLT NF 5/8 X 1 ¼ G5 GOLD PLATED 13128 15 BIG CALIPER CARRIER 10420 16 HEX BOLT W 3/8 X 1 ¼ G5 GOLD PLATED 13389 17 REAR HUB AXLE SHAFT 27463 18 GROOVED BOLT NF 5/8 X21/2 G8 REAR WHEEL 13274 19 BIG BRAKE DISC (FINISHED) 155662 20 CALIPER STILMEC 2.60 INPI (1061.1701)(STI) 14905 21 CONICAL NUT NF 5/8” G°5 WHEELS L=22MM 13087 22 RIM W 12 X 38 (FOR 14.9 X 38 TIRE) 34644 23 TIRE 14.9 X 38 (380/80R38 142 A8) ALLIANCE 35035 VALVE F/AGRICULTURAL TIRE W/O INNER TUBE 14511 24 HEX BOLT W 5/16 X 1 ¼ G5 GOLD PLATED 12938 ZINC PLATED FLAT WASHER 5/16 13561 ZINC PLATED SELF-LOCKING NUT 5/6 W G5 13067 25 MUDFLAP SUPPORT 30290 26 RUBBER MUDFLAP 15026

27 MUDGUARD LEFT REAR (FOR 14.9 X 38 TIRES) 28645 MUDGUARD RIGHT REAR (FOR 14.9 X 38 TIRES) 28644 28 EXT. UPPER HUB DROP BOX 154869 29 BALL BEARING 6210 12562 30 SEEGER RING DIN 472 95 X 3MM 12681 31 CHAIN ASA 120HE AVMT (3048 MM) 29283 RING ASA 120 HE 27987 LINK JOINT ASA 120 HE 27988 32 TOOTHED GEAR Z 15 F/CHAIN 1 ½” 20273 33 UPPER HUB INT REAR LEG 154868 34 GASKET SAV 7147 LX 12643 35 TAPERED BEARINGS 32210 (TIMKEN) 12543 36 GROOVED FLANGE CROSSHEAD HOLDER 20274 37 CROSSHEAD COUPLING MVT 14419 38 OIL LEVEL VIEWER 12329 39 HEX BOLT W 5/16 X ¾ G5 GOLD PLATED W/GROWER WASHER 12936 40 DROP BOX INSPECTION COVER 19369 41 HEX BOLT NF ½ X 1 ¼ G5 GOLD PLATED W/GROWER WASHER 13256 42 HEX BOLT NF ½ X 1 G5 GOLD PLATED W/GROWER WASHER 13006 43 REAR RIGHT CROP DIVIDER (FOR 14.9 X 38 TIRE) 160760 REAR LEFT CROP DIVIDER (FOR 14.9 X 38 TIRE) 160761 44 REAR LEFT MUDGUARD HOLDER TVML USA - ROD. 38 34962 REAR RIGHT MUDGUARD HOLDER TVML USA - ROD. 38 34963 45 BOLT W 3/8“X 1” WITH PLAIN WASHER AND LOCKNUT 12975 46 BOLT W 3/8“X 1”1/4 WITH DOUBLE PLAIN WASHER AND LOCK NUT 12976 47 BOLT W 3/8“X 1” 1/2 WITH PLAIN WASHER AND LOCKNUT 12977

3 - 10MAP II 2850 - November 2014

1

3

6

8

10

9 9 12

15

16

17

16

21

19

18

6

5

42

7

7

11

18

23

22

19

20

13

14

24

9

10

MAP II 2850 - November 2014 3 - 11


Front axle and steering system

LEFT STEERING CYLINDER ASSEMBLED SET HYDROST. 150599

21 LEFT STEERING ARM VT 20302

RIGHT STEERING ARM VT 20303

22 VARIABLE TRACK SPACING RULER “NISER” 27876

23 MANUAL VARIABLE TRACK SPACING EXTENSIBLE DIPSTICK 27281

24 TENSIONER TVM 18909

1 FRONT AXLE LMVT 165106

2 GRILON REGISTER 154280

3 GUARD TAP (THREAD) 18838

4 GUARD TAP 10483

5 BOLT ALLEN W 3/8” X 3/4” G10 13209

6 TENSIONER BALL JOINT RIGHT THREAD 29841

7 TENSIONER BALL JOINT LEFT THREAD 29842

REAR TRANSVERSE TENSIONER 34010

8 FRONT TRANSVERSE TENSIONER TUBE SET 165211

9 SELF-LOCKING NUT 1” NF 13098

FRONT TRANSVERSE TENSIONER 33989

10 BOLT F/BALL JOINT 19461

11 FRONT TENSIONER TUBE SET 165209

FRONT TENSIONER 33987

12 DAMPER 10438/6 PP. 650 KG. SACHS 18472

13 CYLINDER TRACK OPENING 19025

14 FEMALE BALL JOINT TRACK OPENING CYLINDER COSMO 29342

15 MUDGUARD FRONT LEFT SUPPORT SET 165192

MUDGUARD FRONT RIGHT SUPPORT SET 165193

16 BOOM BRONZE BUSHING 12812

17 FRONT LEFT DROP BOX SET 165114

FRONT RIGHT DROP BOX SET 165109

18 FEMALE TIE ROD END R.M.25X1.5 18559

19 METALLIC CLAMP 3/8 (12-22) 13697

20 HYD STEERING CYLINDER (VALVE-ROD) 21/2X280 11315

RIGHT STEERING CYLINDER ASSEMBLED SET HYDROST. 150598

MAP II 2850 - November 2014 3 - 12

1

5

29

8

10

23

26

27

24

9

4 7

6

12 13

18

22

25

21

20

11

14

16

15

19

17

3

28

30

2

3133

33

32

31

MAP II 2850 - November 2014 3 - 13


Front axle and wheels set

1 SPLIT PIN 6 X 95 13656

2 CASTLE NUT NF 1”3/4 SPECIAL 20767

3 SPLINT DIN 6885 A 16 X 10 X 45 13677

4 AXIS TIP TVML AT 33814

5 FRONT CALIPER HOLDER 27480

6 HEX BOLT NF 5/8 X 1 1/4 G5 GOLD PLATED 13128

7 CALIPER STILMEC 2.60 INPI(1061.1701)(STI) 14905

8 HEX W 1/2 X 1 1/4 G5 GOLD PLATED W/GROWER WASHER 13007

9 SEEGER RING DIN 472 125-4 12672

10 GASKET SAV 7221 LX DOUBLE LIP 12638

11 TAPERED ROLLER BEARING 32213 (TIMKEN) 12546

12 ROLLER BEARING 30211 (TIMKEN/SKF) 12541

13 GROOVED BOLT NF 5/8X54 G8 FRONT WHEEL 13275

14 FRONT HUB MODEL 2007 22246

15 CASTLE NUT NF 1”3/4 SPECIAL 20767

16 SPLIT PIN 6 X 95 13656

17 ALUMINIUM CUP 17033

18 HEX BOLT W 1/4 X 3/4 G5 GOLD PLATED W/GROWER WASHER 12917

19 BRAKE DISC BIG (FINISHED) 155662

20 CONICAL NUT NF 5/8” G0 5 WHEELS L = 22 MM 13087

21 RIM W 12 x 38 FOR TIRE 14.9 X 38 34644

22 TIRE 14.9 X 38 (380/80R38 142 A8) ALLIANCE 28310

SPOUT FOR TIRE WITHOUT/INNERTUBE 14511

23 HEX BOLT W 5/16 X 1 1/2 G5 G.PLATED, W/NUT, FLAT AND GROW. WASHER 12939

24 MUDFLAP SUPPORT 30290

25 RUBBER MUDFLAP 15026MX 15026

26 RIGHT MUDGUARD (FOR 14.9 X 38 TIRE) 28644

LEFT MUDGUARD (FOR 14.9 X 38 TIRE) 28645

27 SUPPORT SET FRONT LEFT MUDGUARD LMVT 165192

SUPPORT SET FRONT RIGHT MUDGUARD LMVT 165193

28 HEX BOLT NF 1/2 X 1 1/4 G5 GOLD PLATED W/GROWER WASHER 13256

29 HEX BOLT NF 1/2 X 1 G5 GOLD PLATED W/GROWER WASHER 13006

30 FRONT RIGHT CROP DIVIDER (FOR 14.9 X 38 TIRE) 160758

FRONT LEFT CROP DIVIDER (FOR 14.9 X 38 TIRE) 160759

31 BOLT EX W 3/8 x 1 1/4 G5 GOLDED W/NUT, PLAIN WASHER AND GROWER 12976

32 FRONT LEFT MUDGUARD HOLDER TVML USA - ROD. 38 34960

FRONT RIGHT MUDGUARD HOLDER TVML USA - ROD. 38 34961

33 BOLT EX W 3/8 x 1 1/2 G5 GOLDED W/NUT, PLAIN WASHER AND GROWER 12977


1

9 12

10

6

14

14

16

15

11

17

19

18

14

8

7

2

54

3

20

12

13

MAP II 2850 - November 2014 4 - 3


Hydraulic system tank

1 HYDRAULIC OIL TANK CAP W/FILTER 11454

2 DISMOUNTABLE LID SET 161404

3 OIL LEVEL VIEWER W/ “O” RING 160611

4 MALE SCREW CAP 1/2” GALV 16906

5 HEX W 5/16 x 1 G5 GOLD PLATED W/FLAT DOUBLE AND

GROWER WASHER, WASHER AND NUT 12937

6 HYDRAULIC TANK ASSEMBLY 115 LITERS 161405

7 HEX NUT 3/8” W.G0 5 GOLD PLATED 13040

8 ANTI VIBRATION RUBBER PAD 15050

9 ELBOW 90º (900) 911-12I-12 11797

10 450 BEND M-H 3/4” GALV 16935

11 LOW PRESSURE TERMINAL (500) 510-12-8C 11670

12 LOW PRESSURE TERMINAL (500) 510-12-16 11654

13 HIGH PRESSURE CLAMP 102 (28-34) P/ 1” 29951

14 HOSE OILPRESS Ø 1” (20 - 25) 15143

15 HIGH PRESSURE CLAMP P/1/2” 13697

16 OILPRESS HOSE 1/2” 15145

17 BALL VALVE 1 1/4” FULL PASS (METALLIC) 15881

18 CURVED TERMINAL 1”1/4 11659

19 BALL VALVE 1 1/2” FULL PASS (METALLIC) 15679

20 CURVED TERMINAL 1”1/2 12122


Manifold 7 vías paraCETOP 3 - código 21464

14

448

472 2

1

3

40

41

49

38

37

15

12

9

8

23

3524

25

26

27

6

11 8 9 28

10

32

4339

46

4244

181617

34

33

7

1819202122

29

31

36

30

13

45

MAP II 2850 - November 2014 4 - 5


Hydraulic system I

1 CYLINDER 1”3/8 29390

2 ELBOW 90° 941 - 4 - 4 (INTERIOR 0,5 MM) 11974

3 ELBOW 45° (800) 848 - 4 - 6 21106

4 HOSE 1/4” R1 X 2900 HG - HG 12085

5 HOSE 1/2” R2 X 2000 HG - HG 11834

6 HOSE 1/4” R1 X 1200 HG - HG 21504

7 HOSE 1/4” R1 X 3700 MF - MF 21513

8 HOSE 1/2” R2 X 880 HG - HG 21549

9 HOSE 1/2” R2 X 800 HG - HG 21564

10 HOSE 3/8” R2 X 2200 HG - HG 21821

11 HOSE 3/8” R2 X 740 HG - HG 21548

12 HOSE 3/8” R2 X 650 HG - HG 21547

13 SCREW CAP 78 - 6 21177

14 CARTRIDGE SNRPS KAN 21465

15 ELBOW 90° 941 - 4 - 4 21153

16 DISTRIBUTOR 4 OUTLETS 21308

17 ADAPTER 741 - 4 - 4 21076

18 ADAPTER 711 - 4 - 4 21212

19 PNH 1/4” 21225

20 FEMALE TAP F/PNH ¼” 21412

21 MALE TAP F/PCH 1/4” 21413

22 PCH 1/4” 21224

23 HYDRAULIC JACK CYLINDER 3” X 305 X 45 19007

24 ELBOW 90° 911 - 8 - 6 21031

25 CONTROL FLOW VALVE 3/8” 21029

26 ADAPTER 741 - 8 - 6 21030

27 REAR BOOM LIFT CYLINDER 3” X 1530 19047

28 3 WAY VALVE PIPE TO BOOM CYLINDER 34143

29 3 WAY VALVE PIPE TO 7 WAY VALVE 34141

30 CETOP 3 VALVE PIPE TO 7 WAY VALVE 19504

31 CETOP 3 VALVE PIPE TO CYLINDER 19506

32 ADAPTER 751 - 8 - 8 21027

33 CHECK VALVE W/HYD RELEASE ½” 21028

34 ADAPTER 741 - 8 - 8 21072

35 MALE T - JOINT 14 – 8 – 8 21032

36 HOSE 3/8” R2 X 500 HG - HG 12071

37 HOSE 1/2” R2 X 500 HG - HG 12072

38 HOSE 1/4” R1 X 400 HG - HG 12058

39 HOSE 1/4” R1 X 650 HG - HG 12068

40 MANIFOLD F/ 5 CETOP 3 21950

41 ADAPTER (700) 748 - 6 - 6 21085

42 ELBOW 90° 948 - 8 - 6 21170

43 VALVE CETOP 3 SINGLE SOLENOID 21462

44 VALVE CETOP 3 DOUBLE SOLENOID 21461

45 ADAPTER 748 - 8 - 6 21109

46 ADAPTER 748 - 4 - 6 21083

47 HOSE 1/4” R1 X 3100 HG - HG 12088

48 HOSE 1/4” R1 X 2800 HG - CR 30434

49 ELBOW 45° (800) 848 - 4 - 6 11752


1

2

3

12

13

6

8

1411

31

4

5

7

9

10

30

16

5

17

18 27

28

31

2123

22

25 25

26

24

30

29

32

27

20

19

1531

32

16

MAP II 2850 - November 2014 4 - 7


Hydraulic system II

1 ELBOW 90° 941 - 4 - 4 (INT. 2 MM) 21226

2 OUTER BREAKAWAY LIFT CYLINDER 2”1/2 X 408 (NEW) 30934

3 HOSE 1/4” R1 X 400 HG - HG 21528

4 HOSE 1/4” R1 X 800 HG - HG 21514

5 ELBOW 90° 941 - 4 - 4 21153

6 DOUBLE PILOT OPERATED CHECK VALVE 21872

7 ADAPTER (700) 711 - 4 - 6 21367

8 FLOW CONTROL VALVE COMPENSATED F/OUTER BREAKAWAY 21247

9 ADAPTER (700) 751 - 4 - 6 21227

10 RIGHT PIPE OUTER BREAKAWAY 600986

11 BOOM PIPE EXTENSION 601008

12 HOSE 3/8” R2 X 2200 HG - HG 21821

13 ELBOW 90° 948 - 6 - 6 21169

14 ELBOW 90° L 948 - 6 - 6 21172

15 ELBOW 90° 941 - 4 - 4 (SPECIAL) 21154

16 BOOM LIFT CYLINDER 45° 2”1/2 X 220 19048

17 BOOM OPENING CYLINDER 2”1/2 X 408 30795

18 ELBOW 90° 941 - 4 - 4 (INT. 0,75 MM) 21420

19 CYLINDER 2” X 205 MM 19021

20 ADAPTER 721 - 4 - 4 21066

21 SCREW CAP 78 - 6 21177

22 7 WAY MANIFOLD BT 150381

23 ELBOW 45° (800) 848 - 4 - 6 21106

24 VALVE CETOP 3 DOUBLE SOLENOID 21461

25 CHECK VALVE DOUBLE MODULAR 21246

26 CHECK VALVE SINGLE MODULAR 21873

27 HOSE 1/4” R1 X 1200 HG - HG 21504

28 HOSE 1/4” R1 X 650 HG - HG 21536

29 HOSE 1/4” R1 X 1900 HG - HG 21503

30 HOSE 1/4” R1 X 2200 HG - HG 21508

31 HOSE 1/4” R1 X 2900 HG - HG 21531

32 HOSE 1/4” R1 X 2600 HG - HG 21535


1 2 3

6

20

8

10

15

179 11

2

13

19

4

16

18

16

5

72

14

2

12

MAP II 2850 - November 2014 4 - 9


38 and 52 L hydraulic pumps. Suction filter

1 HOSE OILASPIR 38 mm (1 1/2”) x METER 15163

2 HIGH PRESSURE CLAMP 105 (44-53) P/1 1/2 29953

3 LOW TERMINAL (500) 510 - P - 002 11660

4 BOLT M 8 x 1.25 x 15 G8 WITH GROWER WASHER 13234

5 SUCTION FILTER BASE W/VACUOMETER 12182

6 SUCTION FILTER 15/125 VCI (ELEMENT) 11679

7 LOW PRESSURE TERMINAL (500) 510-20-24 11657

8 HOSE 1”1/4 OILASPIR 32 mm (1 1/4”) 15162

9 LOW TERMINAL (500) 510-CP-001 (NPT 1”1/2) 11659

10 ALUMINUM ELBOW 50348 11430

11 HYDRAULIC PUMP PLATE 20863

12 38 AND 52 L TANDEM PUMPS 29000

13 ALUMINUM ELBOW 50347 11429

14 LOW PRESSURE TERMINAL (500) 510 - IP - 002 11658

15 HOSE 3/4” R2 x 1400 CR-HG (UNF1”1/16 JIC) 11829

16 ADAPTER (700) 741-10-12 11981

17 HIGHPRESS ELBOW 52 L PUMP 28661

18 FOUNDRY ELBOW 90052421 11431

19 HOSE 1/2” R2 x 1500 CHG-HG (UNF 7/8” JIC) 12323

20 SUCTION FILTER 15/125 VCI (COMPLETE) 11767

4 - 10MAP II 2850 - November 2014

1

2

4

5

2

22

20

19

21

9

13

126

3 4

11 10

7

15

17

23

8

5

16

18

21

20

14

MAP II 2850 - November 2014 4 - 11


Steering unit

1 ELBOW 90° L 948 - 8 - L6 (72 MM) 11792

2 ELBOW 90° 948 - 8 - 8 11960

3 PRIORITY VALVE 7 BAR 11995

4 ALLEN BOLT 5/16” X 2” 1/2 W/SELF-LOCKING NUT AND FLAT WASHER 13195

5 ELBOW 90° 948 - 4 - 2 W/ “O” RING 12130

6 HOSE Ø 1/2” R2 X 560 HG - HG 12099

7 HOSE Ø 1/2” R2 X 2000 HG - HG 11834

8 HOSE Ø 1/4” R1 X 650 HG - HG 12090

9 ADAPTER 748 - 8 - 6 W/ “O” RING 11755

10 LOW PRESSURE TERMINAL (500) 580 - 6 - 8 11672

11 METALLIC CLAMP Ø 3/8” 13697

12 HOSE OILPRESS 20 - 13 MM 1/2” 15145

13 ADAPTER 748 - 6 - 6 W/ “O” RING 11731

14 HOSE Ø 3/8” R2 X 900 - 3/4” JIC 37° HG - RING 16 11844

15 HOSE 3/8” R2 X 1300 Ø 16 - HG 12026

16 STEERING UNIT W/LOW SENSING 12154

17 HOSE 3/8” R2 X 2600 Ø 16 - Ø 16 11866

18 HEX BOLT. W 3/8”X 1” W/GROWER WASHER 12795

19 LEFT STEERING CYLINDER 2”1/2 X 280 X 1 11316

20 METRICAL ORIENTED SCREW 16 MM X 1,5 11866

21 ALUMINIUM WASHER Ø 16 MM X 22 X 1,3 13574

22 HOSE 1/2” R2 X 2.000 HG - HG 11834

23 RIGHT STEERING CYLINDER 2”1/2 X 280 X 1 11315

4 - 12MAP II 2850 - November 2014

1-2

1-1

3

2

5

4

13

12

712

11

10

9

8

6

11

1-3

MAP II 2850 - November 2014 4 - 13

1 SIMPLE VALVE CETOP 5 (SPRAYER AND LOADED PUMP) 29308

1 - 1 SOLENOID COIL 12 V belong to set 29308

1 - 2 VALVE SET belong to set 29308

1 - 3 ALLEN BOLT M 6 X 1 X 40 belong to set 29308

2 MINEMES 12347

3 ELBOW 90º 11832

4 ADAPTER (700) 741-4-4 11712

5 MALE CAP 1/2” GALV 16906

6 ELBOW 90° L 941 - 10 - 8 11833

7 HOSE 3/4” R2 x 1400 CR-HG (UNF1”1/16 JIC) 11829

8 CARTRIDGE LPC 7 250 BAR 12019

9 ELBOW 90° 911 - 8I - 8 11796

10 LOW TERMINAL (500) 510 - 8 - 16 11649

11 CLAMP Ø 1” 29951

12 HOSE Ø 1” OILPRESS 20-25 mm 1” 31455


CETOP 5


42

41

40

1

3

4

6 7

2

8

9

5

1214

15

16

17

11

13

27

28

32

33

34

26

31

30

29

21

21

20

2423

19

2022

25

19

35

36 37

38

39

19

18

MAP II 2850 - November 2014 5 - 3


Main tank (inlets)

1 CURVED FITTING 1”1/2 - NUT 1”1/2 (116638) 16044

2 NUT 1”1/2 (2002060) 16050

3 LOCK NUT 1”1/2 (2052060) 16052

4 THREAD W/NUT 1”1/2 (2800007) 34953

5 STRAIGHT FITTING RH 1”1/2 - ESP 1 1/2 (10053) 16301

6 HIGH PRESSURE CLAMP 105 (44-53) P/1”1/2 29953

7 PLASTIC TUBE 38 mm 15188

8 O-RING 2 mm 129 mm P/RA 1”1/2 (G10051V) 16032

9 PLAIN GASKET 47 x 67 x 3 (G40006) P/1”1/2 16034

10 ELECTRIC FLOAT HYD. ACC. LEVEL 17489

11 CURVED FITTING 3/4” W/LOCK NUT 16172

12 PLAIN GASKET Ø 3/4” 15696

13 LOCK NUT 3/4” w/o code

14 THREAD W/NUT 1/2” BSP 18082

15 ELBOW H/H 90° 1/2” BSP 18109

16 THREAD W/1/2”- 1” REDUCING NUT 18132

17 STRAIGHT FITTING RH 1” BSP x SP 1” 18099

18 HOSE OILASPIR YELLOW 3” 30880

19 HIGH PRESSURE CLAMP (60-80) 13728

20 FITTING 900 3”- NUT 3” (116975) 16688

21 O - RING 3” 16690

22 3” NUT (2002090) 16689

23 PLAIN GASKET 3” (G40009) 34539

24 THREAD WITH NUT 3” (2502091) 34540

25 HOSE FERTILEX APER 3” YELLOW 30880

26 ELBOW W/HOSE FITTING DE 1/4” AND THREAD 1/8” 20729

27 PRODUCT TANK PMV 2850 BT USA - 2.850 LTS. 33944

28 TANK FIXATION NUT w/o code

29 HINGED LID GASKET 16190

30 HINGED LID 180° W/BLOCK 16081

31 BALL FLOAT VENT VALVE (504) 16174

32 PLAIN GASKET Ø 1/2” 15656

33 1/2” CURVED FITTING W/NUT 16124

34 TRANSPARENT HOSE 7/8” (P00146) (PER METER) 27396

35 CURVED FITTING 90º 3” - FLANGE 34538

36 STRAIGHT PROLONGER 3” - FLANGE 34535

37 CLAMP 300 34258

38 STUBBY VALVE V3” FLANGE 300 X FITTING MALE 34257

39 CAP 300 - 3” 34013

40 SEAL 300 EPDM (300G) 34259

41 LOADPUMPBANJO(optional) 15224

42 STRAIGHT FITTING RM 2”x 2” 16208


15

14

8-8

13

12

11

8-7 16

17

18

19

20

232421

8-5

8-6

10

11

8-4

9

8-38-2

8-1

7

4

3

2

1

56

22

MAP II 2850 - November 2014 5 - 5

1 HOSE 3/4” R2 X 1.200 CR - HG 12318

2 BOLT W 3/8”X 1”1/2 WITH WASHER GROWER 12977

3 HYDRAULIC ENGINE FOR BANJO PUMP 15229

4 LOW TERMINAL (500) 510 - 12 – 16 11654

5 CLAMP Ø 1” 13700

6 HOSE OILPRESS (20 - 25 MM) 1” 15143

7 HYDRAULIC BOX PEDESTAL W/CODE

8 REPAIR KIT BANJO PUMP 15267

8 - 1 SEGMENT “O” RING BELONGS TO SET 15267

8 - 2 “O” RING SCREW HEAD BELONGS TO SET 15267

8 - 3 STAINLESS STEEL WASHER BELONGS TO SET 15267

8 - 4 POLYPROPYLENE TURBINE FOR 5 FIN PUMP (BELONGS TO SET 15267) 15268

8 - 5 JET ENGINE GASKET BOLT BELONGS TO SET 15267

8 - 6 STAINLESS STEEL JET ENGINE BOLT BELONGS TO SET. 15267

8 - 7 “O” PUMP BODY RING BELONGS TO SET 15267

8 - 8 RETENTION VALVE (BELONGS TO SET 15267) 155065

9 STAINLESS STEEL BEARER SCREW W/CODE

10 STAINLESS STEEL HIGHER SCREW FOR VOLUTE W/CODE

11 PRIMING/DRAINING TAP W/CODE

12 STAINLESS STEEL SCREW W/CODE

13 POLYPROPYLENE PUMP BODY SET W/CODE

14 SATINLESS STEEL SCREW FOR POLYPROPYLENE PUMP VOLUTE W/CODE

15 POLYPROPYLENE PUMP VOLUTE 16621

16 COTTER PIN OF TURBINE W/CODE

17 SEALS KIT BANJO PUMP 15266

18 POLYPROPYLENE REAR PUMP CLAMP W/CODE

19 STAINLESS STEEL NUT WITH WASHER GROWER W/CODE

20 BOLT W 5/16”X 1”3/4 G5 WITH PLAIN WASHER AND LOCKNUT 12940

21 BEARING 12524

22 ADAPTER AXLE 16593

23 BEVELLED WASHER Ø 3/8” SHORT RANGE 13589

24 ADAPTER (700) 748 - 10 - 10 11680


Centrifugal load pump (disassemble) (optional)

February


1

6

4 2-1

72-2

2-2

5

6

5

1

8

6

9

21

3 4

1114

15

16

11

10

13

11

12

3029

25

27

24

22

28

26

23

25

21

2019

1817

5

MAP II 2850 - November 2014 5 - 7


Main tank (outlets)

1 TANK CONNECTION 1/2” BSP 18094

2 PLASTIC PIPE Ø 1/2” (PER METER) 16810

3 ELBOW M-H 1/2 IPS 18064

4 ELBOW H-H 1/2 IPS 18062

5 THREAD W/NUT 1/2” BSP 18082

6 TAP RH 1/2” BSP 18088

7 CROSS RH 1/2” BSP 18100

8 T-JOINT RH 1/2” BSP 18063

9 ROTARY JET TANK CLEANING 31404

10 INNLET TANK 2” BANJO F/FLANGE (MBF220BD) 34017

11 CLAMPS 220 5 (FC220) 34019

12 ELBOW F/FLANGE 220 2” (M220BRB90) 34021

13 3 WAY BALL VALVE LOWER INLET 220 (MVT220BL) 34261

O-RING F/FLANGE 220 (200GV) 34020

14 ELBOW F/FLANGE 220 (M220CPG90) 34022

15 FLANGE ADAPTER (N220A) 34023

16 QUICK COUPLING CAP 200 (200CAP) 34024

17 ELECTRIC FLOAT HYD. AC. LEVEL 17489

18 FEMALE TAP 2” BSP WITH JOINT 16121

19 LOCK NUT 2” 16053

20 PLAIN JOINT 2” 16035

21 THREAD W/NUT 2” 15565

22 STARIGHT FITTING 3/4” - ESP. 3/4” 18044

23 TEE FEMALE 3/4” 18063

24 HOSE PULVEPRESS M.S.L 3/4” 15171

25 HIGH PRESSURE CLAMP 101 (25-30) P/3/4 29950

26 NUT 1”1/4 (2002050) 16049

27 LOCK NUT 1”1/4 16214

28 STARIGHT FITTING 1/2” - ESP. 3/4” 16134

29 COUPLE 1/2” (ARAG 230 2020) 18111

30 HYDRAULIC AGITATOR 16403


3

4

6

8

6

12

1415

13

9

1

16

16

5

7

16

2 5

6

10

11

5

10

MAP II 2850 - November 2014 5 - 9


Auxiliary tank

1 “PLA” FUEL TAP 14003

2 INTAKE THROAT F/FUEL TANK 20536

3 PARKER SCREW N.10 x 25 (PHILIPS) 13339

4 BALL FLOAT VENT VALVE 16174

5 HIGH PRESSURE CLAMP 105 (44-53) P/1 1/2 29953

6 STRAIGHT FITTING RM 1”1/4 - ESP 1”1/4 (1032532) 15600

7 BALL VALVE 11/4 3V NORMAL (4542235) 15638

8 ELBOW M-H 1”1/4 IPS 15693

9 THREAD W/NUT 1 1/4 (2502051) 16149

10 HOSE PULVEPRESS M.S.L 1”1/4 15173

11 CHECK VALVE 1”1/4 (504010F) 16397

12 FRESH WATER TANK REAR BOOM 14083

13 SCREW 1/4 14 x 25 HWH Nº3 KWIK SEAL C/A W/RUBBER WASHER 12927

14 FRONT HEADLIGHT (HIGH) 30226

15 FRONT HEADLIGHT (HIGH/LOW) 30227

16 HEAD TANK BOLT w/o code

5 - 10MAP II 2850 - November 2014

2

3

7

5

8

9

8

5

6

10

4

15

14

14

25

26

13 2813

7

13

18

11

13

13

14

27

13

13

16

14

17

19

2122

24

18

20

21

22 23

1

12

MAP II 2850 - November 2014 5 - 11


Chemical inductor (optional), product pump and filters

22 2 WAY VALVE 1” (WV100FP) 34002

23 STRAIGHT FITTING RM 1”3/4 (HB100-75) 34037

24 STRAIGHT FITTING 1”- RM 1” (HB100) 34001

25 FLANGE 473000175 34301

26 FLANGE 473000075 34302

27 RAVEN REGULATING VALVE 2123 (AC) 33976

28 RAVEN FLOWMETER (0 - 60 GAL) 630171793 (USA) 33975

1 CHEMICAL INDUCTOR 2850/3250/F/HIDRO MOD2011 (optional) 29650

WASHED DRUMS 30238

VENTURI HYDRAULIC AGITATOR 33442

2 HYPRO PUMP 9306S 34050

3 ELBOW RM 1”1/2 - HOSE FITTING 1”1/2 35042

4 THREADED NUT 2” 30817

5 ELBOW 45º 2” - RM-RH 34266

6 CONECTOR FLANGE 220 - RM 2” 34264

7 STRAIGHT FITTING 1”1/4 (M220125BRB) 34025

8 CLAMP 220 (FC 220) 34019

9 ELBOW 45º F/FLANGE 220 (M220 G45) 34263

10 3 WAY BALL VALVE BANJO LOWER INLET F/FLANGE (MV220BL) 34861

11 ELBOW F/FLANGE 220 2” (M220BRB90) 34021

O-RING 220 (220GV) 34020

12 FILTER 2” (MLS 200-12) 34265

13 CLAMP 200 (FC 200) 33993

14 STRAIGHT FITTING 1”1/2 (M200150BRB) 34271

15 PROP. CONTROL VALVE MANUAL (473070) 16354

16 3 WAY FLANGE VALVE 200 (MV200BL) 34270

O-RING FLANGE 200 (150GV) 34268

17 ADAPTER 200/100 (M200/100 CP69) 34272

18 CLAMP 100 (BANJO 6156082) 33995

O-RING FLNAGE 100 (M150GV) 34273

19 T-JOINT F/FLANGE 100 (M100TEE) 34034

20 ELBOW FLANGE 100 (M100CPG90) 34035

21 FLANGE ADAPTER 100 RM 1” (M100MPT) 34000

5 - 12MAP II 2850 - November 2014

33 3432

10

31

30

2923

21

20

19

3

14

13

12

11

28

27

26

25

24

22

18

35

16

15

9

8

7

6

5

4

2

1

MAP II 2850 - November 2014 5 - 13

1 DRAINAGE TAP 16279

2 STRAIGHT FITTING TM 1/8”- HOSE FITTING 5/16” PUMP PURGE 20728

3 TUBED PUMP + RING 0150-9000S (WITH THREAD) 15433

TUBED PUMP + RING 0150-9000S (WITH FLANGE) 34766

4 POLYPROPYLENO DRIVER NUT W/CODE

5 POLYPROPYLENO DRIVER 34765

6 VITON PACKING 16392

7 “O” RING 2 - 165 16366

8 VITON MECHANICA GASKET 15522

9 BRIDDLE ASSEMBLY 15434

10 BOLT W 3/8”x 1” (STAINLESS STEEL) W/CODE

11 SEEGER RING DIN 472 35 x 1,5 12675

12 BALLS BEARING 16371

13 SPACER 16372

14 SEAL 12639

15 GASKET SPACER 16374

16 KIT REPAIR AXIAL BEARING UNIT 16375

17 SEEGER RING DIN 6799 15 RS 12677

18 AXLE 7”1/2 LONG 16377

19 DRIVING PIN 16378

20 CYLINDER PIN 16379

21 ENGINE BODY WITH BEARING 16380

22 BOLT W 5/16”x 1” 12937

23 “O” RING 2 - 146 12173

24 GEROTOR BOX HYPRO HM5C 16382

25 SPIKE W/CODE

26 GEROTOR 16383

27 TORRINGTON BEARING B1212 15339

28 BOLT ALLEN W 5/16”x 2”1/2 WITH WASHER GROWER 13195

29 DEFLECTION ADJUSTMENT SCREW WITH CUNTERNUT 16385

30 GASKET SCREW BYPASS 16386

31 WASHER BYPASS 16376

32 ENGINE EXTREME PLATE WITH BEARING 16384

33 TANK INLET ADAPTER 16388

34 PRESSURE INLET ADAPTER 16391

35 WASHER 34767

SET HIDRAULIC COMMAND HYPRO ENGINE (WITH THREAD) 16667

SET HIDRAULIC COMMAND HYPRO ENGINE (WITH FLANGE) 34050


Sprayer pump (disassemble)

5 - 14MAP II 2850 - November 2014

1

31

30

29

32

29

5

33

3

6

5

4

2

525

1924

23

6

21

5

22

2019

49

46

47

14

4544

43

426

48

11 12 13 14 1615 17 6 5 6

18

10

8

9

6

7

34

28

28

29

31

35

3635

5

27

26

4241

40

39

38

37

MAP II 2850 - November 2014 5 - 15


Main and second side boom and outer breakaway

1 HINGE PIN UPPER (36-11-06-01-06) 19334 2 DOUBLE LINE FILTER SUPPORT 19968 3 HEX BOLT W 5/16 x 1”1/4 G5 G. PL. W/LOCK NUT, FLAT AND GROW. WASHER 12938 4 BRONZE BUSHING INT. 19374 5 SPLIT PIN 4 x 40 13648 6 GREASE FITTING 1/4” NF STRAIGHT 13640 7 LEFT SECOND SIDE BOOM 150229 RIGHT SECOND SIDE BOOM 150224 8 SECOND SIDE BOOM OUTER BREAKAWAY BOLT (36-11-11-01-07) 19697 9 SPRING BLOCK BREAK AWAY (R 007) 14344 10 HEX NUT 3/8 W G0 5 GOLD PLATED W/FLAT WASHER 13040 11 BIG SPRING BREAK AWAY RETURN 14343 12 RIGHT OUTER BREAKAWAY (25 m) 150225 LEFT OUTER BREAKAWAY (25 m) 150230 RIGHT OUTER BREAKAWAY (27.3 m) 151262 LEFT OUTER BREAKAWAY (27.3 m) 151263 13 NOZZLE PROTECTION 20393 14 SELF-LOCKING NUT1/4 W G0 5 W/FLAT WASHER 13085 15 STAPLE F/CA Ø 40 x 20 STAINLESS 30383 16 HEX NUT 3/4 NF GOLD PLATED 18586 17 BOOM FOLDING DEVICE 162340 18 LONG BRONZE BUSHING INT. 19373 19 HEX NUT 5/16 W G0 5. W/FLAT WASHER 13039 20 SECOND SIDE BOOM LIFT CYLINDER 2“ 1/2 x 408 mm 30934 21 SECOND SIDE BOOM SUSP. PAD 50 mm 15014 22 “U” STAPLE BOOM STOP BICHR. 19740 23 HEX BOLT W 3/8 x 2 1/2 G5 GOLD PLATED 12981 24 BOOM – OUTER BREAKAWAY BLOCK SPRING 150226

25 SECOND SIDE BOOM SUSP. PAD 75 mm 15013 26 SCISSORS BOLT (36-11-07-01-04) 19558 27 HEX BOLT M8 x 1.25 x 15 G8 GOLD PLATED 13234 28 BRONZE BUSHING INT. 19345 29 GREASE FITTING 1/8” BSP 13642 30 SLOTTED SPRING PIN 6 x 50 13625 31 INT. BRONZE BUSHING 20657 32 BOOM HINGE 18878 33 SPLIT PIN 5 x 90 18878 33 SPLIT PIN 5 x 90 13657 34 CASTLE NUT 1 1/2 NF G0 5 GOLD PLATED 13095 35 BOLT F / LIFT CYL.45º IN HINGE 19679 36 LIFT CYLINDER 45º 2 1/2 X 220 11320 37 HINGE PIN (36-11-06-01-06) 19364 38 RIGHT MAIN SIDE BOOM (25 m) 150223 LEFT MAIN SIDE BOOM (25 m) 150228 RIGHT MAIN SIDE BOOM (27.3 m) 151256 LEFT MAIN SIDE BOOM (27.3 m) 151714 39 HEX BOLT W 5/16 x 1 1/4 G5 GOLD PLATED 12938 40 TIE PLATE 80-02-06-01-04 (L. 80) 154481 41 HOLDER PLATE 22-25-27 m 20455 42 NUT 5/16” W/FLAT WASHER AND GROWER WASHER 13039 43 BOOM SKID SPRING 20517 44 BOLT W 1/4”x 3/4” W/GROWER WASHER 12917 45 BOOM SKID SPRING SUPPORT 154389 46 BOOM SKID SPRING UPPER SUPPORT 19961 47 STAPLE F/PIPE 40 X 30 19414 48 BOLT Ø 22 X 190 CYLINDER SUPPORT BREAKAWAY LIFT 19370 49 BOLT Ø 22 X 250 UNION 19559

MAP II 2850 - November 2014 5 - 16

1

9

8

7

10

8

4

6

2

7

9

2

4

5

6

3

7

5

4

3

11

11

17

12

1820

14

1

13

14

16

19

20

14

19

15

Detail 9

5 - 17

Section shut-off and spraying line (central boom)

MAP II 2850 - November 2014


1 HOSE PULVEPRESS 1” 15172

2 METALLIC CLAMP Ø 1” 13700

3 NUT W 5/16” 13039

4 BED PLATE SET 26.6MM TEST PLAST 15421

5 HEX BOLT W 5/16”X 3/4” W/GROWER WASHER 12936

6 PARKER SCREW N.10 X 25 (PHILIPS) 13339

7 STAINLESS STEEL PIPE 3/4” see*

8 T-JOINT H 3/4” (STAINLESS) 18160

9 QUINTUPLE NOZZLE HOLDER QJ365C-3/4-NYB 15415

9-1 NUT M 6 BELONGS TO SET 15415

9-2 PHILIPS HEAD BOLT M 6 X 1” BELONGS TO SET 15415

9-3 “O” RING 2,62 X 9,13 X 14,37 BELONGS TO SET 15415

9-4 5 WAY NOZZLE HOLDER BELONGS TO SET 15415

9-5 GASKET F/CAP 1/4 TURN BELONGS TO SET 15415

9-6 HOLLOW CONE NOZZLE HCX8 (GRIS) 15883

NOZZLE 80015 15951

NOZZLE 8002 15952

NOZZLE 8003 15953

NOZZLE 8004 15954

9-7 CAP F/HOLLOW CONE GREEN 16092

NOZZLE HOLDER CAP YELLOW 16105


NOZZLE HOLDER CAP BLUE 16107

9-8 ANTI-DRIP CAP 0,5 BAR RED BELONGS TO SET 15415

9-9 HIGH PRESSURE ANTI-DRIP MEMBRANE BELONGS TO SET 15415

10 ELBOW RM 3/4 1”(BANJO) 15431

11 FEMALE SCREW CAP 3/4” 15419

12 LINE FILTER CENTRAL BOOM SET 3/4” 151938

13 5 ELECTROVALVES KIT RAVEN (AC) 33974

14 FLANGE 100 33995

15 RACOR 100 - FITTING 3/4” 34037

16 FLANGE 200 33993

17 FILTER - FLANGE 200 34747

O - RING 200 34268

18 CURVED RACOR 34770

19 FILTER - FLANGE 100 34746

20 STRAIGHT RACOR 100 34037

O - RING 100 34273

*Whenrequestingpipespleaseindicatetotallengthanddistancebetweenholes

5 - 18MAP II 2850 - November 2014

2

1

1 2

2

1

8

36

3

1

Detail 7

Detail 4 Detail 5

Detail 4

Detail7

Detail 4

Detail 5

1

2

3

Detail 7

3

3

3

3

1

2

6

1

2

1

2

MAP II 2850 - November 2014 5 - 19


Spraying line (main side boom)

1 HOSE PULVEPRESS M.S.L 1” 15172

2 METALLIC CLAMP 1 (30-45) 13700


4 CONNECTION TO FEEDER

4 - 1 STRAIGHT FITTING RM 3/4 – TH. 1”(BANJO) 15432

4 - 2 COUPLE RH 3/4” BSP w/o code

5 CONNECTION MAIN SIDE BOOM – SECOND SIDE BOOM

5 - 1 ELBOW RM 3/4 – TH. 1”(BANJO) 15431

5 - 2 ELBOW H-H 3/4 (STAINLESS) 18159


7 SPRAYING LINE CONNECTION

7 - 1 ELBOW RM 3/4” BSP - TH. 1” 54573

7 - 2 “T” RH 3/4” BSP 64129

7 - 3 FEMALE SCREW CAP 3/4” 15419

8 NOZZLE HOLDER QUINT QJ365C-3/4-NYB 15415


5 - 20MAP II 2850 - November 2014

1

2

3

5

4

3

4

5

6

5

11

12

8

2

1

7

6

7

2

1

5

4

3

9

2

58

1

2

7

Detail 11

10

8

MAP II 2850 - November 2014 5 - 21


Spraying line (second side boom and outer breakaway)

1 HOSE PULVEPRESS M.S.L 1” 15172

2 METALLIC CLAMP 1 (30-45) 13700

3 ELBOW RM 3/4 1”(BANJO) 15431

4 ELBOW H-H 3/4 (STAINLESS) 18159


6 COUPLE 3/4 (STAINLESS) 18161

7 STRAIGT FITTING RM 3/4 1”(BANJO) 15432


9 T-JOINT H 3/4” (STAINLESS) 18160

10 BED PLATE SET 26.6MM TEST PLAST 15421

11 SINGLE NOZZLE HOLDER F/ 3/4” PIPE 54561

(parts without code belong to this set)

11 - 1 PARKER SCREW w/o code

11 - 2 “O” RING 2,62 X 9,13 X 14,37 EPDM w/o code

11 - 3 SINGLE NOZZLE HOLDER BODY w/o code

11 - 4 GASKET F/CAP 1/4 TURN w/o code

11 - 5 NOZZLE 02 F80 15974

NOZZLE 8002 15952

NOZZLE 80015 15951

NOZZLE 8003 15953

NOZZLE 8004 15954

11 - 6 CAP F/HOLLOW CONE GREEN 16092


NOZZLE HOLDER CAP RED 15106

NOZZLE HOLDER CAP BLUE 16107

NOZZLE HOLDER CAP BLACK 16090

11 - 7 REPLACEMENT MEMBRANE 16153

11 - 8 ANTI-DRIPPING NOZZLE HOLDER BODY 16128

12 QUINT. NOZZLE HOLDER QJ365C-3/4-NYB 15415


Date post:	06-Feb-2018
Category:	Documents
Upload:	dangkhuong
View:	231 times
Download:	5 times

Model - Plapla.com.ar/site/imagenes/productos/pulverizadoras/CR/35208 (191114... · Model Machine...

Documents