Section: Section 15Page: SLG7-1Effective Date: May 5, 2015
Model SLG72X Series Liquid Measurement Model Selection GuideGuided Wave Radar Level Transmitter With Price Data
Model Selection Guide Honeywell Proprietary34-SL-16-01 Issue 1
(ref. 35-SL-16-01)
Instructions● Select the desired Key Number. The arrow to the right marks the selection available.● Make one selection from each Table (I, II and IX) using the column below the proper arrow.● A (●) denotes unrestricted availability. A letter denotes restricted availability.● Restrictions follow Table IX.
Key Number II III IV VI IX
- - - _ - - - _ - - - _ _ _ _ _
KEY NUMBER U.S.$$2,750
TABLE I
● $0
d $65
d $65
d $115
d $105
d $125
d $110
e $35
v $144
TABLE I (con't) 20 U.S.$u $0p $55● $0q $65q $75q $85q $95q $105● $85● $265● $95● $95
e. Probe length units ● $0f. Probe length ● Price from Probe Table
Note: All flanges are 316L; when coated or C-276 wetted materials are selected a wetted material barrier is provided.Note 2: A drilling jig needs to be ordered when ordering centering disk for rod probes. See accessory part numbers for drilling jig part.
TABLE II 20 U.S.$● $350● $350● $350● $415● $510● $595● $600● $832● $850● $1,265● $355● $360● $415● $430● $485● $495● $595● $785● $1,120● $1,587● $563● $1,206● $0● $0● $20● $135● $20● $20● $80
316/316L General Liquids
a. Wetted materialsand probe type
Honeywell Process Solutions, 1250 W. Sam Houston Pkwy S., Houston, Texas 77042Printed in U.S.A. © Copyright 2015. Honeywell International Inc.
1" BSP (G 1") GS1A1-1/2" BSP/G 1-1/2 GS5A
ThreadedFittings
ISO228 and ANS316/316L
GS7A
FS1DMasoneilan 7-1/2" 600 psi MS1C
NS1A1 - 1/2" NPT (CRN) NS5A
2" NPT (CRN) NS2A
3/4" NPT (CRN) NS7A1" NPT (CRN)
3/4" BSP (G 3/4")
FlangesSpecial 316/316L
Fisher 249B/259B 600lb FS1CFisher 249C 600lb
FlangesDIN EN 1092
316/316L
DN40 DN40 PN10-40 DS4A
DN200 DN200 PN16 DS2A
DN100DN100 PN10/16 DS1ADN100 PN25/40 DS1B
DN150 DN150 PN10/16 DS1Y
DN80DN80 PN10/16 DS8ADN80 PN25/40 DS8B
DN50DN50 PN10/16 DS5ADN50 PN25/40 DS5B
6" Class 150lb RF AS6A8" Class 150lb RF AS8A
4"Class 150lb RF AS4AClass 300lb RF AS4B
3"Class 150lb RF AS3AClass 300lb RF AS3B
FlangesANSI B16.5 (CRN) 316/316L
1-1/2" Class 150lb RF AS1AClass 300lb RF
Metric (millimeters) _ _ _ _ _ _ _ M _ _ _ _ _
Class 300lb RF AS2B
AS1B
2"Class 150lb RF
400 mm to 50000 mm (in 100 mm increments) _ _ _ _ _ _ _ _ X X X X X
Connection Types Material Size Rating Selection
AS2A
c. Centering Disk 316/316L
_ _ _ _ S 2 _ _ _ _ _ _ _3" Centering Disk (see Note 2 below) _ _ _ _ S 3 _ _ _ _ _ _ _4" Centering Disk (see Note 2 below) _ _ _ _ S 4 _ _ _ _ _ _ _6" Centering Disk (see Note 2 below)
2" Centering Disk (see Note 2 below)
EPDM (-40 to 120C) _ _ _ _ _ _ E _ _ _ _ _ _Buna-N (-30 to 120C) _ _ _ _ _ _ B _ _ _ _ _ _
8" Centering Disk (see Note 2 below) _ _ _ _ S 8 _ _ _ _ _ _ _
b. Probe EndTreatment End Type None _ _ _ N _ _ _ _ _ _ _ _ _
Weight _ _ _ W _ _ _ _ _ _ _ _ _None _ _ _ _ 0 0 _ _ _ _ _ _ _
_ _ _ _ S 6 _ _ _ _ _ _ _
d. Seal material
Viton® or Fluorocarbon Elastomer (-30 to 150C) _ _ _ _ _ _ V _ _ _ _ _ _Kalrez 6375 perfluorelastomer (-20 to 200C; saturated steam max 150C) _ _ _ _ _ _ K _ _ _ _ _ _
SRN _ _ _ _ _ _ _ _ _ _
SWA _ _ _ _ _ _ _ _ _ _ Base charge is shown to the left. See Probe Length
Pricing table for length pricing.
Wire, Single 4 mm dia, max 300 mm nozzle height center rod 1.3m (1.3 ft) / 50m (164 ft) SWB _ _ _ _ _ _ _ _ _ _
Base charge is shown to the left. See Probe Length
Pricing table for length pricing.
Rod, Single 12 mm dia., segmented, 2000 mm segments 0.4m (1.3 ft) / 6.3m (20.7 ft) SRB _ _ _ _ _ _ _ _ _ _
U.S.$Probe and Material Selections
SelectionProbe Material Measurement Probe Type & Dia. Min/Max Length
Meters (Feet)
None - Customer Supplied (Single Rod and Wire Only)
Wire, Single 4 mm dia 1.0m (1.3 ft) / 50m (164 ft)
0.4m (1.3 ft) / 6.3m (20.7 ft)
0 0 0 _ _ _ _ _ _ _ _ _ _
Rod, Single 8 mm dia., segmented, 2000 mm segments 0.4m (1.3 ft) / 6.3m (20.7 ft) SRA _ _ _ _ _ _ _ _ _ _
Rod, segmented, 8 mm dia, 1000 mm segments 0.4m (1.3 ft) / 6.3m (20.7 ft) SRJ _ _ _ _ _ _ _ _ _ _
Rod, segmented, 12 mm dia, 500 mm segments
Rod, segmented, 8 mm dia, 500 mm segments 0.4m (1.3 ft) / 6.3m (20.7 ft) SRH _ _ _ _ _ _ _ _ _ _
Avai
VIII (Optional)
SelectionProbe and Material Selections
List Price equals the sum of all selections made. _ _ , _ _
0.4m (1.3 ft) / 6.3m (20.7 ft) SRM _ _ _ _ _ _ _ _ _ _
Rod, segmented, 12 mm dia, 1000 mm segments
I V VII
Application SelectionStandard T/P Liquid Level Measurement (-40 to 200C/-1 to 40 bar) SLG720
SLG72 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Distributed by Relevant Solutions | 1.888.858.3647 | relevantsolutions.com
Section: Section 15 Honeywell Proprietary Page: SLG7-2Effective Date: May 5, 2015
TABLE III● $0● $26● $26● $26
TABLE IV
● $0● $0● $75● $75● $603● $603● $677● $677
● $70● $402
● $0f $59● $201● $281● $258● $339
TABLE V
● $0
● $0● $540● $540
● $0
f $0f $24f $24f $24g $24g $24
● $0● $39
3 NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer.
TABLE VICalibration Qty
● $0t $37
TABLE VII● $0● $26● $37● $0n $212n $67m $84n $108m $108
TABLE VIII● $0u $26u $26● $113● $26● $37● $26j $26● $135● $45● $65● b $82● $82● $114
TABLE IX● $0● $0
15
Manufacturing Specials Selection
FactoryApplication and Validation Tool (AVT) Configuration File Reference # _ _ _ _ _Factory Default Configuration, No AVT File 00000
Extended Warranty Additional 4 years 04Extended Warranty Additional 15 years
Certifications & Warranty
1/2 NPT 316 SS Certified Conduit Plug _ A6M20 316 SS Certified Conduit Plug
Extended Warranty Additional 2 years 02Extended Warranty Additional 3 years 03
Certificate of Origin F5FMEDA (SIL 2/3) Certification FE
None 00
WHG Overfill Protection WGExtended Warranty Additional 1 year 01
_ A7Minifast® 4 pin (1/2 NPT)
a. Customer Tag
No customer tag 0 _ _One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) 1 _ _Two Wired Stainless Steel Tag (Up to 4 lines 26 char/line) 2 _ _
bCalibration Test Report & Certificate of Conformance F1
bNACE MR0175; MR0103; ISO15156 Process wetted and non-wetted parts F7EN10204 Type 3.1 Material Traceability; pressure retaining parts FXCertificate of Conformance F3
NACE MR0175; MR0103; ISO15156 Process wetted parts only FG
OTHER Certifications & Options: (String in sequence comma delimited (XX, XX, XX,….) Selection
e. GeneralConfiguration
Factory Standard _ _ _ _ SCustom Configuration (Unit Data Required from customer)
Selection
ACCESSORY SELECTIONS Selection
CALIBRATION & ACCURACY SELECTIONS
N/A N/A Fieldbus or Profibus _ _ _ 5 _
b. UnassembledConduit Plugs &
Adapters
No Conduit Plugs or Adapters Required _ A01/2 NPT Male to 3/4 NPT Female 316 SS Certified Conduit Adapter _ A2
_ A8Minifast® 4 pin (M20) _ A9
N/A N/A Fieldbus or Profibus _ _ _ 6 _
Accuracy and Calibration
Accuracy Calibrated RangeStd Accuracy (+/-3mm or +/-0.03%) Factory Std (uses RF cable calibrator) Single Range
Disabled
None _ _ 0 _ _
_ _ _ _ C
Custom calibration w/ certificate (Unit Data Single Range BA
Std Accuracy (+/-3mm or +/-0.03%)
Disabled High> 21.0mAdc Honeywell Std (3.8 - 20.8 mAdc)
Enabled
_ _ _1 _Disabled Low< 3.6mAdc Honeywell Std (3.8 - 20.8 mAdc) _ _ _ 2 _Enabled High> 21.0mAdc Honeywell Std (3.8 - 20.8 mAdc) _ _ _ 3 _
EnabledLow< 3.6mAdc Honeywell Std (3.8 - 20.8 mAdc) _ _ _ 4 _
b. InterfaceMeasurement
Interface OptionsNone - Standard Level _ 0 _ _ _Interface Measurement _ 1 _ _ _Flooded Interface Measurement _ 2 _ _ _
d. Output Limit,Failsafe & WriteProtect Settings
Write Protect Fail Mode High & Low Output Limits3c. Compensations
_ _ E
U.S.$a. Diagnostics
Diagnostics
Standard Diagnostics 1 _ _ _ _
CONFIGURATION SELECTIONSSelection 20
_ _ CAdvanced
_ _ 0None Yes (Zero/Span Only) None _ _ ABasic None English _ _ B
None EN, GR, IT, FR, SP, RU, TU _ _ D
c. Customer InterfaceSelections
Indicator Ext Zero, Span & Config Buttons Languages
None None None
Advanced Yes EN, GR, IT, FR, SP, RU, TU
Basic Yes English
4-20mA dc HART Protocol _ H _n/a Foundation Fieldbus _ F _
b. Output/ ProtocolAnalog Output Digital Protocol
1/2 NPT Yes G _ _
M20 Yes D _ _316 Stainless Steel (Grade CF8M) 1/2 NPT None E _ _
316 Stainless Steel (Grade CF8M) M20 Yes H _ _
Polyester Powder Coated AluminumC _ _
TRANSMITTER ELECTRONICS SELECTIONSSelection
a. Electronic HousingMaterial &
Connection Type
Material Connection Lightning ProtectionPolyester Powder Coated Aluminum 1/2 NPT None A _ _Polyester Powder Coated Aluminum
316 Stainless Steel (Grade CF8M) M20 None F _ _316 Stainless Steel (Grade CF8M)
M20 None B _ _Polyester Powder Coated Aluminum 1/2 NPT Yes
Approvals
No Approvals Required 0
IECEx Explosion proof, Intrinsically Safe & Non-incendive DATEX Explosion proof, Intrinsically Safe & Non-incendive C
Agency Approvals (see data sheet for Approval Code Details) Selection
CSA Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof B
Distributed by Relevant Solutions | 1.888.858.3647 | relevantsolutions.com
Section: Section 15 Honeywell Proprietary Page: SLG7-3Effective Date: May 5, 2015
MODEL RESTRICTIONS
b
c
d
e
fg
j
k
mn
p
q
r
u
v
HART® is a registered trademark of HART Communication Foundation.FOUNDATIONTM Fieldbus is a trademark of Fieldbus Foundation.Viton® is a registered trademark of DuPont Performance Elastomers.Teflon® is a registered trademark of DuPont.FM ApprovalsSM is a service mark of FM Global
if probe lengths less than 20 meters
(<_ _ _ _ _ _ _ _ 20000)
IaSWA_ _ _ _ _ _ _ _ _ _, SWB_ _ _ _ _ _ _ _ _ _
1a,1b
SWAW _ _ _ _ _ _ _ _ _,SWBW _ _ _ _ _ _ _ _ _,
SRA_ _ _ _ _ _ _ _ _ _,SRB_ _ _ _ _ _ _ _ _ _, SRH_ _ _ _ _ _ _ _ _ _, SRJ_ _ _ _ _ _ _ _ _ _,SRM_ _ _ _ _ _ _ _ _ _,
SRN_ _ _ _ _ _ _ _ _ _
If
probe length 1000 mm to 50000 mm (_ _ _ _ _ _ _ _ _ 1000 to _ _ _ _ _ _ _ _
50000) II NS7A, NS1A, GS7A, GS1A
IVb
If
probe length 1300 mm to 50000 mm (_ _ _ _ _ _ _ _ _ 1300 to _ _ _ _ _ _ _ _
50000)
IaSWA_ _ _ _ _ _ _ _ _ _, SWB_ _ _ _ _ _ _ _ _ _
t IaSWA_ _ _ _ _ _ _ _ _ _, SWB_ _ _ _ _ _ _ _ _ _
_ H _
Ifprobe length 400 mm to 6300 mm (_ _ _ _ _ _ _ _ _ _ 400 to _ _ _ _ _ _ _ _ _
6300) II NS7A, GS7AIVa B_ _, D_ _, F_ _, H_ _IVa A_ _, C_ _, E_ _, G_ _
IVb _ F _
h Ifprobe length 400 mm to 6300 mm (_ _ _ _ _ _ _ _ _ _ 400 to _ _ _ _ _ _ _ _ _
6300)
II NS7A, GS7A
If probe length > 2000 mm
If
probe length 1000 mm to 50000 mm (_ _ _ _ _ _ _ _ _ 1000 to _ _ _ _ _ _ _ _
50000)IVb _ F _
Select only one option from this group
If
probe length 400 mm to 6300 mm (_ _ _ _ _ _ _ _ _ _ 400 to _ _ _ _ _ _ _ _ _
6300) II NS7A, NS1A, GS7A, GS1A
If
probe length 400 mm to 6300 mm (_ _ _ _ _ _ _ _ _ _ 400 to _ _ _ _ _ _ _ _ _
6300)
Restriction LetterAvailable Only with Not Available with
Table Selection(s) Table Selection(s)
Distributed by Relevant Solutions | 1.888.858.3647 | relevantsolutions.com
Section 15 Honeywell Proprietary Page: SLG7-4Effective Date: May 5, 2015
Probe Length Table
Table IIa Table IIa Table IIaSRA _ _ _ _ _ _ _ _ _ _ $2.75 na ---- ARA _ _ _ _ _ _ _ _ _ _ $SRB _ _ _ _ _ _ _ _ _ _ $3.60 $ ARB _ _ _ _ _ _ _ _ _ _ $
PRA _ _ _ _ _ _ _ _ _ _ $ naSRC _ _ _ _ _ _ _ _ _ _ $ PRB _ _ _ _ _ _ _ _ _ _ $ ARC _ _ _ _ _ _ _ _ _ _ $SWA _ _ _ _ _ _ _ _ _ _ $1.25 na ---- na ----SWB _ _ _ _ _ _ _ _ _ _ $1.30 na ---- na ----SWC _ _ _ _ _ _ _ _ _ _ $ na ---- na ----SWD _ _ _ _ _ _ _ _ _ _ $ na ---- na ----
Rod, Twin 8 mm dia SRT _ _ _ _ _ _ _ _ _ _ $ na ---- na ----Wire, Twin 4mm dia SWT _ _ _ _ _ _ _ _ _ _ $ na ---- na ----Coaxial, 22mm OD (per 2000mm increments) SCA _ _ _ _ _ _ _ _ _ _ na ---- ACA _ _ _ _ _ _ _ _ _ _ $Coaxial, 42mm OD (per 100mm increments) SCB _ _ _ _ _ _ _ _ _ _ na ---- ACB _ _ _ _ _ _ _ _ _ _ $Coaxial (per 500mm increments) SCC _ _ _ _ _ _ _ _ _ _ ACC _ _ _ _ _ _ _ _ _ _Coaxial (per 1000mm increments) SCD _ _ _ _ _ _ _ _ _ _ ACD _ _ _ _ _ _ _ _ _ _
SCE _ _ _ _ _ _ _ _ _ _ ACE _ _ _ _ _ _ _ _ _ _SCF _ _ _ _ _ _ _ _ _ _ ACF _ _ _ _ _ _ _ _ _ _
Rod, Segmented, 8mm, 500mm segments (price per 100mm increments) SRH _ _ _ _ _ _ _ _ _ _ $12.20 na ---- ARD _ _ _ _ _ _ _ _ _ _ ----Rod, Segmented, 8mm, 1000mm segments (price per 100mm increments) SRJ _ _ _ _ _ _ _ _ _ _ $5.70 na ---- ARE _ _ _ _ _ _ _ _ _ _ ----Rod, Segmented, 12mm, 500mm segments (price per 100mm increments) SRM _ _ _ _ _ _ _ _ _ _ $12.40 na ---- ARF _ _ _ _ _ _ _ _ _ _ ----Rod, Segmented, 12mm, 1000mm segments (price per 100mm increments) SRN _ _ _ _ _ _ _ _ _ _ $6.50 na ---- ARG _ _ _ _ _ _ _ _ _ _ ----Rod, Segmented, 16mm, 500mm segments SRK _ _ _ _ _ _ _ _ _ _ $ na ---- ARH _ _ _ _ _ _ _ _ _ _ ----Rod, Segmented, 16mm, 1000mm segments SRL _ _ _ _ _ _ _ _ _ _ $ na ---- ARJ _ _ _ _ _ _ _ _ _ _ ----
na ---- PWA _ _ _ _ _ _ _ _ _ _ $ na ----na ---- PWM _ _ _ _ _ _ _ _ _ _ $ na ----na ---- PWN _ _ _ _ _ _ _ _ _ _ ---- na ----
Probe Type
Probe Mat'l
316L SS PFA>316SS Alloy C-276Multiply Price shown per every 100 mm (4") of probe length
Wire, Single 6 mm dia (nozzle 300 mm max)
Wire, Single 7 mm diaWire, Single 7 mm dia (nozzle 150 mm max)Wire, Single 7 mm dia (nozzle 300 mm max)
Rod, Segmented, 8 mm dia, 2000mm segments (price per 100mm increments)Rod, Segmented, 12 mm dia, 2000mm segments (price per 100mm increments)
Rod, Single 16 mm diaWire, Single 4 mm dia (price per 100mm increments)Wire, Single 4 mm dia (nozzle 300 mm max) (price per 100mm increments)Wire, Single 6 mm dia
Rod, Single 12 mm dia
Coaxial (42 mm OD), 500 mm segmentsCoaxial (42 mm OD), 1000 mm segments
Distributed by
Relevant Solutions 1.888.858.3647 relevantsolutions.com
Distributed by Relevant Solutions | 1.888.858.3647 | relevantsolutions.com