Applications:Sunken roofRim Seal fireVapor Suppression/Mitigation
Options:3” Aluminum Waterway Monitor w/Tiller Bar Control250-1,000 gpm Automatic Nozzle4” Aluminum Waterway Monitor w/Dual Hand Wheel Control500-2,000 gpm Automatic Nozzle Rim Mounted ModelTruck Mounted Model“Throw-Down” ModelTank Mount Standard Unit
For US and Foreign Patent and Trademark information, please refer to page IP2
120108
PRODUCTS 409-745-3232 EMERGENCY 409-727-2347E2
MONITORS MONITORS
WWW.WILLIAMSFIRE.COM
Monitors
Product:
Daspit Tool - Truck Mount™
For US and Foreign Patent and Trademark information, please refer to page IP2
120108
PRODUCTS 409-745-3232 EMERGENCY 409-727-2347E3
MONITORS MONITORS
WWW.WILLIAMSFIRE.COM
Monitors
Product:
Daspit Tool™ - Throw Down Model
Component Weights:Daspit™ Tool Throw Down Mount = 113 lbs8 Stabilizing stakes = 64 lbs
For US and Foreign Patent and Trademark information, please refer to page IP2
47.875”
120108
PRODUCTS 409-745-3232 EMERGENCY 409-727-2347E4
MONITORS MONITORS
WWW.WILLIAMSFIRE.COM
Monitors
Product:
Alpha MA-HV4 Monitor
Description: Rugged lightweight aluminum construction 4” ID full flow monitor with “Quick Acting” Tiller-Bar control for vertical and horizontal move-
ment. Red powder coat anodized aluminum. The single 4” full-flow waterway with internal turning vanes is designed to provide maximum efficiency. The “Easy-Lock” brake system insures that the nozzle position “stays put” with the simple twist of an ergonomically designed locking bar. Monitor features a 3.50” (M) NH outlet and a 4.0” 150# ASA flat-faced flange inlet. Horizontal articulation is 360˚ and vertical travel is 75˚ up and -25˚ down.
120108
PRODUCTS 409-745-3232 EMERGENCY 409-727-2347E5
MONITORS MONITORS
WWW.WILLIAMSFIRE.COM
Monitors
Product:
Alpha-E Tiller Bar Monitor - 3”
Description:Rugged, corrosion resistant brass construction; unique configuration flows up to 1250 gpm; compact - just 16” high; 3” NPT female, 3” or
4” 150# ANSI flange; vertical movement 90 degrees above horizontal to 45 degrees below; full, continuous 360 degree rotation; rugged, stainless steel lock hardware; brass balls in all swivel joints; grease fittings for easy lubricaion; durable acrylic urethane finish
Alpha-E Tiller Bar Monitor
Waterway Inlet Discharge MaterialVertical Travel
Horizontal Rotation
3” 3”-4” Flanged 2.5” NH(M) Cast Brass 90º 360º
120108
PRODUCTS 409-745-3232 EMERGENCY 409-727-2347E6
MONITORS MONITORS
WWW.WILLIAMSFIRE.COM
SharpshooterFour
Waterway Inlet Discharge MaterialVertical Travel
Horizontal Rotation
4” 4” Flange 3.5” NH(M) Cast Brass 80º 360º
Monitors
Product:
“SharpShooter Four” Tiller Bar -4”
Description: Superior grade 4” I.D. waterway monitor with tiller bar control for vertical and
horizontal movement. Designed for use in corrosive atmospheres that require the dependability and durability of an all brass monitor. Single waterway with turning vanes providing excellent projection for water or foam streams. Flows up to 1,500 gpm.
Tiller bar control with brake band swivels, adjusts, then locks at the vertical and horizontal position. Vertical setting is from minus (-) 10º to plus (+)70º. Full 360 degree horizontal travel. Painted red polyurethane finish. 3.5”NH (M) discharge threads. Base -4” 150 # ASA flange.
120108
PRODUCTS 409-745-3232 EMERGENCY 409-727-2347E7
MONITORS MONITORS
WWW.WILLIAMSFIRE.COM
SharpshooterFour
Waterway Inlet Discharge MaterialVertical Travel
Horizontal Rotation
4” 4” Flange3.5” NH(M)
FlangeCast Brass 100º 360º
Monitors
Product:
“SharpShooter Four” Dual Handwheel -4”
Description: Superior grade 4” I.D. waterway monitor with dual handwheel/worm gear operation for vertical and horizontal movement. The ultimate monitor for portable applications or for fixed installations where precise and positive control are needed. Designed for use in corrosive atmospheres that require the dependability and durability of an all brass monitor. Single waterway with turning vanes providing excellent projection for water or foam streams. Flows up to 1,500 gpm.
Vertical handwheel adjusts trajectory from minus (-) 10º to plus (+)90º. Horizontal handwheel allows for full 360º rotation. Painted red polyurethane. 3.5”NH (M) discharge threads. Base -4” 150 # ASA flange.
120108
PRODUCTS 409-745-3232 EMERGENCY 409-727-2347E8
MONITORS MONITORS
WWW.WILLIAMSFIRE.COM
Monitors
Product:
Alpha-SHW Single HandWheel Monitor - 3”
Description: Rugged, cast brass construction • Full 3.0” unobstructed waterway • FLows up to 1250 GPM • Handwheel driven worm gear fully enclosed
and protected from the elements • Stainless steel worm • Vertical travel from 70˚ above to 70˚ below horizontal • Gear holds vertical position wherever it is stopped • Four ball races with bronze balls and grease zerks for easy lubrication • Full 360˚ rotation with positive twist lock • 2.5” male outlet • FM Approved • See chart for base options • Finish red urethene enamel.
Model Waterway Inlet Discharge MaterialVertical Travel
Description: Designed for use in corrosive atmospheres that require the dependability
of an all brass monitor. Suitable for most industrial environments. Flows up to 300 gpm @ 100 psi. Full 2” I.D. waterway, efficiently designed to minimize pressure drop. 2” NPT female inlet base, 1.5” NH male discharge tip. Tiller bar control handle with rubber grip. Vertical (110º) and horizontal (360º) adjust-ments with positive quarter-turn locking handles. Natural brass finish.
Model Waterway Inlet Discharge MaterialVertical Travel
Horizontal Rotation
MiniMonitor
2” 2”NPT (F) 1.5” NH(M) Cast Brass 110º 360º
120108
PRODUCTS 409-745-3232 EMERGENCY 409-727-2347E10
MONITORS MONITORS
WWW.WILLIAMSFIRE.COM
Oscillating Monitors
Product:
Spectrum High Flow Model 4 Oscillating
Monitor Tiller Bar Control
Description: For flows between 750 - 1500 gpm. Spectrum High Flow Model 4 water-
powered oscillating monitor is constructed of predominantly corrosion-resis-tant materials. Cast brass monitor body with stainless steel trim. 4” I.D. water-way with turning vanes. Controls provided for adjusting vertical trajectory as well as horizontal position. Reciprocating motion is generated by a two-way high performance hydraulic actuator. Oscillation is accomplished through the use of plated sprockets and a heavy duty drive chain. Standard arc of oscillation is from 0-90˚ and speed of oscillation is from 0-40˚ per second. Vertical trajectory is from minus (-)10˚ to plus (+)70˚. Standard inlet flange - 4” 150# ASA RF Flange. Monitor is to be used with either a non air-aspirating or air-aspirating nozzle. Standard 3.5” NH (M) discharge. Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF.
Description: For flows between 150-750 gpm. Spectrum Medium Flow Model 4 low profile
water-powered oscillating monitor features a super-compact design, as well as pre-dominantly corrosion resistant materials of construction. Reciprocating motion is generated by a two way high performance hydraulic actuator. Oscillation is accom-plished through the use of plated sprockets and a heavy duty drive chain. Arc of oscillation is from 0-185º and speed of oscillation is from 0-40º per second. Nozzle elevation is from 10º below to 70º above horizontal. Single brass 3” I.D. waterway with turning vanes provided with positive horizontal and vertical locks. Standard inlet flange - 4” 150# ASA RF Flange. Monitor can be used with either a non air-aspirating or air aspirating nozzle. Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF.
Description: For flows between 150-750 gpm. Spectrum Marine Grade Model 4 low profile water-powered oscillating monitor features a super-compact
design, as well as construction of totally corrosion resistant materials to include inlet flange, enclosure and drive mechanism, sprocket and chain — all manufactured in 316 Stainless Steel. Reciprocating motion is generated by a two way high performance hydraulic actuator. Oscillation is accomplished through the use of plated sprockets and a heavy duty drive chain. Arc of oscillation is from 0-185º and speed of oscillation is from 0-40º per second. Nozzle elevation is from 10º below to 70º above horizontal. Single brass 3” I.D. waterway with turning vanes provided with positive horizontal and vertical locks. Standard inlet flange - 4” 150# ASA RF Flange. Monitor can be used with either a non air-aspirating or air aspirating nozzle. Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF.
* Minimum operating pressure = 50 psi
120108
PRODUCTS 409-745-3232 EMERGENCY 409-727-2347E13
MONITORS MONITORS
WWW.WILLIAMSFIRE.COM
Oscillating Monitors
Product:
Spectrum Low Flow Model 4 Oscillating Monitor
Description: For flows between 100-350 gpm. Spectrum Low Flow Model 4 low profile water-
powered oscillating monitor features a super-compact design, as well as corrosion resistant materials of construction. Reciprocating motion is generated by a two-way high perfor-mance hydraulic actuator. Oscillation is accomplished through the use of plated sprockets and a heavy duty drive chain. Arc of oscillation is from 0-185º and speed of oscillation is from 0-40º per second. Nozzle elevation is from 30º below to 80º above horizontal. Single brass 2” I.D. waterway. Provided with positive horizontal and vertical locks. Standard inlet flange -4” 150#. Monitor can be used with either a non air-aspirating or air-aspirating nozzle. Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF.
* Minimum operating pressure = 50 psi
(Nozzle shown for reference only)
Model Flow @ 100 PSI Inlet Discharge Water I.D.
Low Flow Model 4 Between 100 - 350 gpm 4” 150# ASA RF flange 1.5” NH(M) 2”
120108
PRODUCTS 409-745-3232 EMERGENCY 409-727-2347E14
MONITORS MONITORS
WWW.WILLIAMSFIRE.COM
Oscillating Monitors
Product:
“Durham” Oscillating Monitor Conversion Kit
Description: The Durham Conversion Kit transforms an existing manual station moni-
tor into an oscillator. Designed for use with most 2.5” or 3” I.D. single waterway monitors, flowing up to 750 gpm. Upgrading foam or water monitor coverage in any area is now as easy as unbolting the existing monitor and inserting the conver-sion kit between the flanges. Oscillating mechanism is identical to the one used on the Spectrum Model 4 Oscillating Monitor and is Factory Mutual Approved - File No. J.I.1R6A3.AF. Standard inlet and discharge flange is -4” ASA RF Flange 150#. Optional inlet and discharge flanges available upon request.
* Minimum operating pressure = 50 psi
Model Flow @ 100 PSI Inlet Discharge Water I.D.
Durham Conversion Kit
up to 750 gpm 4” 150# ASA RF flange 4” 150# ASA RF flange 2.5” or 3”
Description: Flows water or foam from 500 to 6,000 gpm. The Spectrum Direct-Mounted Electric
Actuated High Volume/Remote Control Monitor has a programmable oscillation capability, but may also be overridden with a matched Hydro-Foam™ nozzle operated remotely through the use of a joystick and switches on a consolidated control panel. Manual operation can also be accomplished locally through the use of handwheels. Foam concentrate can be propor-tioned at the nozzle through the use of a jet ratio controller and atmospheric concentrate storage tank. All electric actuators are reversible, NEMA 7 explosion proof, refinery grade, F.M. Approved and C.S.A. certified. No external controls, starters, or starters in motor control center are needed. Only power and control conductors are required. Monitor can be programmed to “return to home” position (horizontal, vertical, nozzle to wide angle fog) after use, automatically, whether P.L.C. controlled or hard wired.
Two direct mounted electric actuators with speed reducing gear drives installed on the motor enable remote control of horizontal posi-tion, as well as vertical trajectory. Field-adjustable limit switches on each actuator allow 340º horizontal rotation and from minus (-)70º to plus (+)70º vertical travel. Monitor traversing speed is a least 10º per second. A third direct-mounted electric actuator enables remote operation for the nozzle’s discharge pattern, from wide fog to straight stream.
Weather protective cowlings are provided over all gears and shafts. Monitor and controls are designed for minus (-)20º F operation. Maximum working pressure is 200 psi.
Stainless Steel monitor (waterway) with red epoxy finish. Includes lifting lug for handling and mounting. Stainless steel swivels with stain-less steel ball bearings. Steel/bronze gears. Nickel plated brass shaft. Standard motor voltage is 480/3/60. Standard Control voltages is 120 Vac. Other voltages are available when required.
NOTES:
• Monitor Mounted Junction Box is NEMA 4X, pre-wired to monitor actuators, with all required electrical interface equipment”
• 4” or 6” fabricated stainless steel waterways provide maximum flow efficiency, minimum friction loss, and provides the ultimate in product longevity.
• Normally supplied with custom control panel — wireless options available
• Exceeds all known competitors’ specifications, options, and performance
• Suitable for Marine/Dock Protection, and any special hazards protection
• Engineered Tower/Waterway available, heights from 5’ to 40’
• Matched water supply specialty deluge valve and strainer packages available
Description: Flows water or foam from 500 to 3,000 gpm. The Spectrum Electro/Hydraulic High
Volume/Remote Control Monitor is operated remotely through the use of a joystick and switches on a consolidated control panel. Manual operation can also be accomplished locally through the use of handwheels.
Two hydraulic actuators installed on the monitor enable remote control of horizontal position, as well as vertical trajectory. Maximum travel is limited to 340 degrees horizontal travel and from minus (-)70 degree to plus (+)70 degree vertical travel. Monitor traversing speed is at least 8 degrees per second. A direct-mounted linear hydraulic actuator enables remote operation for the nozzle’s discharge pattern, from wide fog to straight stream. Weather protective cowlings are provided over all gears and shafts.
Equipped with a standard non air aspirating fog-to-straight stream nozzle. With a matched Hydro-Foam™ nozzle, foam concentrate can be proportioned at the nozzle through the use of a jet ratio controller and atmospheric concentrate storage tank.
Stainless steel monitor (waterway) with red epoxy finish. Includes lifting lug for han-dling and mounting. Stainless steel swivels with stainless steel ball bearings. Steel/bronze gears. Nickel plated brass shaft. Anodized aluminum fog/straight stream nozzle.
Note: Pressure losses indicated are nominal and vary slightly with each monitor.
Monitor and Friction Head Loss
2”
4”3”
6”
8”
120108
PRODUCTS 409-745-3232 EMERGENCY 409-727-2347E20
MONITORS MONITORS
WWW.WILLIAMSFIRE.COM
Monitor Accessories
Product:
Hydrant Monitor Stand
Description: For mounting monitor station (Hydro-Foam™ or water only) onto any
fire hydrant. Standard configuration: water inlet is 2.5” NH(F) brass swivel; 3” waterway with 90 degree elbow; bolted vertical support stanchions; flanged discharge (specify either 3” or 4” 150# ASA). Red polyurethane finish.
Monitor Stand shown with Hydrant and Optional Monitor and Nozzle. Note: hydrant not included.
