Monthly Notifications Register - SUTN · 2013. 3. 7. · International : Modified ACI 311.1R:2007...

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2013-02-01 to 2013-02-28

Register issued on : 2013-03-06

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A09: FACILITY MANAGEMENT

Subsector : A09 Registration Date : 2013-02-22Organization : TSECountry : TurkeyProject ID : tst12415/0001 Project EstablishedICS : 03.080.30National Ref :Title : Wholesale Markets – Terms – Descriptions and ClassificationScope : This standard includes rules for structural characteristics, operating, personal and

equipment of wholesale markets.

Relatedness :National : New

Subsector : A09 Registration Date : 2013-02-05Organization : TSECountry : TurkeyProject ID : tst71729/0001 Project EstablishedICS : 03.080.30National Ref :Title : Work places-Service making of natural gas conversion – General rules Scope : This standard includes the rules for structural characteristics, technical equipments,

management and personnel characteristics of making natural gas conversion places.


** End of Subsector **

Subsector A11: SAFETY AND SECURITY

Subsector : A11 Registration Date : 2013-02-05Organization : TSECountry : TurkeyProject ID : tst12255/0001 Project EstablishedICS : 03.080.30National Ref :Title : Competent services for lifts, escalators and passengers conveyors – RulesScope : This standard includes rules for operating, structural features, technical equipment,

personnel specifications and certification of competent services for lifts, escalators and passenger conveyors.


Subsector : A11 Registration Date : 2013-02-19Organization : TSECountry : TurkeyProject ID : tst12512/0001 Project EstablishedICS : 03.080.30National Ref :Title : The competent services –Rules for child car seats, pusets and pramsScope : This standard includes rules for operating, physical characteristics, managership, technical

Scope : equipment, personel specifications and certification of Competent services for for child car seats, pusets and prams.


Subsector : A11 Registration Date : 2013-02-19Organization : TSECountry : TurkeyProject ID : tst12559/0001 Project EstablishedICS : 03.080.30, 11.180National Ref :Title : The competent services – Technical aid devices used for disabled people - RulesScope : This standard includes rules for operating, physical characteristics, managership, technical

equipment, personel specifications and certification of Competent services for Technical aid devices used for disabled people


Subsector : A11 Registration Date : 2013-02-11Organization : TSECountry : TurkeyProject ID : tst12831/0001 Project EstablishedICS : 03.080.30National Ref :Title : Competent services – Rules for Switching and Control EquipmentsScope : This standard includes rules for management, structural features, technical equipment,

personnel specifications and certification of competent services of Switching and Control Equipments.


Subsector : A11 Registration Date : 2013-02-05Organization : TSECountry : TurkeyProject ID : tst91287/0001 Project EstablishedICS : 03.080.30National Ref :Title : Competent services – Video Communication Equipment– RulesScope : This standard includes rules for operating, physical characteristics, managership, technical

equipment, personnel specifications and certification of Competent services for video communication equipment.


Subsector : A11 Registration Date : 2013-02-05Organization : TSECountry : Turkey

Project ID : tst91290/0001 Project EstablishedICS : 03.080.30National Ref :Title : Competent services for Low-voltage switchgear and controlgear assemblies– RulesScope : This standard includes rules for operating, physical characteristics, managership, technical

equipment, personnel specifications and certification of Competent services for Low-voltage switchgear and controlgear assemblies


Subsector : A11 Registration Date : 2013-02-11Organization : TSECountry : TurkeyProject ID : tst91303/0001 Project EstablishedICS : 03.080.30National Ref :Title : Competent services – Distance measurement devices in motor vehicles – RulesScope : This standard includes rules for operating, physical characteristics, managership, technical

equipment, personnel specifications and certification of Competent services for Distance measurement devices in motor vehicles.


Subsector : A11 Registration Date : 2013-02-11Organization : TSECountry : TurkeyProject ID : tst91304/0001 Project EstablishedICS : 03.080.30National Ref :Title : Competent services – Rack Cabinettes and Industrial Electronical Device Enclosures–

RulesScope : This standard includes rules for operating, physical characteristics, managership, technical

equipment, personnel specifications and certification of Competent services for Rack Cabinettes and Industrial Electronical Device Enclosures.


Subsector : A11 Registration Date : 2013-02-05Organization : TSECountry : TurkeyProject ID : tst91311/0001 Project EstablishedICS : 03.080.30National Ref :Title : Competent services for simultaneously translation systems – RulesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of competent services of simultaneously translation systems.


Subsector : A11 Registration Date : 2013-02-05Organization : TSECountry : TurkeyProject ID : tst91312/0001 Project EstablishedICS : 03.080.30National Ref :Title : Competent services for card printers – RulesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of competent services of card printers.


Subsector : A11 Registration Date : 2013-02-20Organization : TSECountry : TurkeyProject ID : tst91456/0001 Project EstablishedICS : 03.080.30National Ref :Title : Competent services for caravan living containers steel buildings etc. products – RulesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of competent services of caravan living containers steel buildings etc. products.


Subsector : A11 Registration Date : 2013-02-20Organization : TSECountry : TurkeyProject ID : tst91457/0001 Project EstablishedICS : 03.080.30, 97.200.40National Ref :Title : Competent services - for swing, seesaw, slide etc. playground elements – RulesScope : This standard includes rules for operating, physical characteristics, managership, technical

equipment, personnel specifications and certification of Competent services for swing, seesaw, slide etc. playground elements.



Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2013-02-11Organization : LVS Draft Issue Date : 2013-02-11Country : Latvia Latest Date for Comments : 2013-03-14Project ID : 00370001/0001 Project EstablishedICS : 03.080.99National Ref : prLVS 401

Title : Assets valuation standardsScope : This standard Standard specifies terminology, conceptions and principles, performance

requirements, test methods for valuations of various types of property and differnt cases

Relatedness :National : REV/AMD LVS 401:2002

Subsector : A99 Registration Date : 2013-02-26Organization : UNICountry : ItalyProject ID : 08000110/0001 Project EstablishedICS : 03.040National Ref : U08000110Title : Non-regulated professions - Art Therapy professionals - Knowledge, skill and

competence requirementsScope : This standard defines for every professional profile the requirements for Art Therapy

professionals, in terms of knowledge, skills and competence needed to practise the profession.


Subsector : A99 Registration Date : 2013-02-12Organization : TSECountry : TurkeyProject ID : t1008985/0001 Project EstablishedICS : 03.080.30, 67.040National Ref :Title : Work places- Catering- Kitchen and food services- General rules Scope : This standard includes general rules of structural qualifications; developing and presenting

software; consulting, supporting, training services and personnel qualifications of catering- kitchen and food services


Subsector : A99 Registration Date : 2013-02-12Organization : TSECountry : TurkeyProject ID : t1013149/0001 Project EstablishedICS : 03.080.30, 35.080National Ref :Title : Work places - Software providers - General rulesScope : This standard includes rules for structural characteristics, operating, personal and technical

equipment of work places for software providers


Subsector : A99 Registration Date : 2013-02-05Organization : TSE

Country : TurkeyProject ID : tst10082/0001 Project EstablishedICS : 03.080.30National Ref :Title : Accomodation facilities – Hotels - Classification and SpecificationScope : This standard relates to the characteristics and classification of accommodation facilities

and hotels.


Subsector : A99 Registration Date : 2013-02-05Organization : TSECountry : TurkeyProject ID : tst33415/0002 Project EstablishedICS : 03.080.30National Ref :Title : Tourism services – General rules Scope : discussions on the subject to authorized persons



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2013-02-07Organization : NENCountry : NetherlandsProject ID : 50001798/0001 Project EstablishedICS : 13.220.50National Ref : NEN 6069:2013 Concept nlTitle : Testing and classification of resistance to fire of building products and building elementsScope : This standard gives specifications for the classification and testing of the resistance to fire

of building products and building elements in the Netherlands.


Subsector : B01 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA181989/0001 Project EstablishedICS :National Ref : PR NF S61-931Title : Fire Safety Systems - General requirements



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2013-02-19Organization : TSECountry : TurkeyProject ID : t1013515/0001 Project EstablishedICS : 91.080.40National Ref :Title : Complementary Turkish standard to TS EN 206-1Scope : TS EN 206-1, Concrete — Specification, performance, production and conformity permits

the use of national application rules in a number of sections in order to take into account differences in climatic and geographic conditions, safety levels and established regional practices. These national application rules for Turkey are given in this standard. This standard is to be used in conjunction with TS EN 206-1, applying to in-situ and precast concrete, including precast elements, used for buildings and civil engineering works.

Relatedness :National : NewEuropean : Modified DIN 1045-2:2008

Subsector : B02 Registration Date : 2013-02-12Organization : TSECountry : TurkeyProject ID : tst91339/0001 Project EstablishedICS : 91.100.30National Ref :Title : Guide for application of concrete inspection

Scope : This guide is intended to guide, assist and instruct concrete inspectors and others engaged in concrete construction and testing, including field engineers, construction superintendents, supervisors and laboratory and field technicians

Relatedness :National : NewInternational : Modified ACI 311.1R:2007

Subsector : B02 Registration Date : 2013-02-12Organization : TSECountry : TurkeyProject ID : tst91353/0001 Project EstablishedICS : 91.100.30National Ref :Title : Guide for conducting a visual inspection of concrete in structureScope : This guide provides basics and gives terminology to perform and report on the visual

inspection of concrete in structure during its service life

Relatedness :National : NewInternational : Modified ACI 201.1R:2008

Subsector : B02 Registration Date : 2013-02-21Organization : TSECountry : TurkeyProject ID : tst91417/0001 Project EstablishedICS : 91.100.30National Ref :Title : Strength evaluation of existing concrete buildingsScope : This report provides recommendations to establish the loads that can be sustained safely by

the structural elements of an existing concrete building.



Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040880/0001 Project EstablishedICS :National Ref : PNE 83171 INTitle : Proposal for an environmental declaration of concreteScope : This standard develops a proposal of EPD for two specific types of concrete with given

assumptions and considerations.


Subsector : B03 Registration Date : 2013-02-21Organization : TSE

Country : TurkeyProject ID : tst03455/0001 Project EstablishedICS : 91.100.30National Ref :Title : Test method for determinining the permeability coefficient of hardened concreteScope : This test covers the laboratory determination of the coefficient of water permeability of

hardened concrete specimens



Subsector B12: MASONRY

Subsector : B12 Registration Date : 2013-02-27Organization : TSECountry : TurkeyProject ID : t1001261/0001 Project EstablishedICS : 91.100.30National Ref :Title : Clay products - Floor systems - Clay hollow block with no mechanical functionScope : This standard deals with the requirements and the basic performance criteria for prism

shaped (without nib) blocks made of clay, with no mechanical function in the final floor system. The concrete which is used in the construction of beam-and-block floor and roof systems with this kind of blocks may be cast-in-situ or not.



Subsector B14: GEOTECHNICS

Subsector : B14 Registration Date : 2013-02-18Organization : ISRM

Country :Former Yugoslav Republic of Macedonia

Project ID : 00042146/0002Draft for public

enquiryICS : 93.020National Ref : HМКС 1004Title : Geotechnical investigation and testing – Field testing – Determination of bulk density -

Sand-Cone methodScope : This Macedonian standard describes the procedure for determination of soil bulk density

with Sand-Cone method in field conditions.Estimation of soil compaction and verification of density during execution of earthworks and construction civilengineering structures



Subsector B15: SANITARY APPLIANCES

Subsector : B15 Registration Date : 2013-02-07

Organization : TSECountry : TurkeyProject ID : tst02749/0001 Project EstablishedICS : 91.140.70National Ref :Title : Basin used in traditional Turkish bathScope : This test method covers the specifications/requirements of basin used in traditional Turkish

baths.



Subsector B22: WALLCOVERINGS

Subsector : B22 Registration Date : 2013-02-28Organization : SNV Draft Issue Date : 2013-02-21Country : Switzerland Latest Date for Comments : 2013-04-19Project ID : CH130005/0001 Draft for public enquiryICS : 91.060.30National Ref : SIA 256Title :

Ceiling linings

Relatedness :National : REV/AMD SIA 256 (1988)

Subsector : B22 Registration Date : 2013-02-28Organization : SNV Draft Issue Date : 2013-02-21Country : Switzerland Latest Date for Comments : 2013-04-19Project ID : CH130006/0001 Draft for public enquiryICS : 91.060.30National Ref : SIA 118/256Title : General conditions for ceiling linings



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2013-02-26Organization : UNICountry : ItalyProject ID : 01059341/0001 Project EstablishedICS : 23.060.40National Ref : E01059341Title : Gas pressure control systems and/or gas measurement installations for inlet max

pressure up to 12 bar for industrial and domestic use - Part 1: Design, construction and testing - General

Scope : The design, construction and testing of control systems and measurement of the natural gas, operated with maximum pressure upstream upto 12 bar for industrial and civil use, are treated by the standard series UNI 10619 which is composed, in addition to the present,

Scope : UNI 10619-1, also from the following parts: - UNI 10619-2 - Systems pressure control and / or measurement of the natural gas, operated with maximum pressure upstream up to 12 bar for industrial and civil use. Design, construction and testing - Equipment for gas control. - UNI 10619-3 - Systems pressure control and / or measurement of the natural gas, operated with maximum pressure upstream up to 12 bar for industrial and civil use. Design, construction and testing – Gas measuring systems This standard deals with the general aspects for the design, construction and testing: - of the control of the gas pressure, - measurement of the plants, - plant pressure control and measurement including the slots.

Relatedness :National : REV/AMD UNI 10619:1997


pressure up to 12 bar for industrial and domestic use - Design, construction and testing – Equipment for gas control

Scope : The design, construction and testing of control systems and measurement of the natural gas, operated with maximum pressure upstream upto 12 bar for industrial and civil use, are treated by the standard series UNI 10619 which is composed, in addition to the present, UNI 10619-1, also from the following parts: - UNI 10619-1 - Systems pressure control and / or measurement of the natural gas, operated with maximum pressure upstream up to 12 bar for industrial and civil use. Design, construction and testing - General. - UNI 10619-3 - Systems pressure control and / or measurement of the natural gas, operated with maximum pressure upstream up to 12 bar for industrial and civil use. Design, construction and testing – Gas measuring systems This standard applies to equipment for gas control serving plants fed from pipelines with MOPu ≤ 12 bar located downstream of a distribution first reduction and measurement of natural gas plant in accordance with the UNI 9167.



pressure up to 12 bar for industrial and domestic use - Design, construction and testing - Gas measuring systems

Scope : The design, construction and testing of control systems and measurement of the natural gas, operated with maximum pressure upstream upto 12 bar for industrial and civil use, are treated by the standard series UNI 10619 which is composed, in addition to the present, UNI 10619-1, also from the following parts:

Scope : - UNI 10619-1 - Systems pressure control and / or measurement of the natural gas, operated with maximum pressure upstream up to 12 bar for industrial and civil use. Design, construction and testing - General. - UNI 10619-2 - Systems pressure control and / or measurement of the natural gas, operated with maximum pressure upstream up to 12 bar for industrial and civil use. Design, construction and testing – Equipment for gas control This standard applies to gas measuring systems for natural gas distribution plants fed from pipelines with MOPu ≤ 12 bar located downstream of a distribution first reduction and measurement of natural gas plant in accordance with the UNI 9167.


Subsector : B25 Registration Date : 2013-02-26Organization : UNICountry : ItalyProject ID : 01089440/0001 Project EstablishedICS : 13.220.20National Ref : E01089440Title : Gas and monoxide detectors for domestic and similar premises - Installation, use and

maintenanceScope : This standard definies the criteria for the installation, use and maintenance for gas

combustible and carbon monoxide detectors designed for continuous operation in a fixed installation in domestic and similar premises.



Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2013-02-15Organization : SUTNCountry : SlovakiaProject ID : 73300813/0001 Project EstablishedICS : 93.080.20National Ref :Title : Road building. Gravel crimped with asphalt mixtureScope : National standard STN 73 6128 provides 4 technologies, but only two are used in

construction practice. The standard was developed in 1996 and does not fully correspond with contemporary technical conditions. It must be in conformity with the European standard EN 13108-4 and therefore it is revised.


Subsector : B26 Registration Date : 2013-02-05Organization : SNV Draft Issue Date : 2013-02-04Country : Switzerland Latest Date for Comments : 2013-03-18Project ID : CH130004/0001 Draft for public enquiryICS : 93.020

National Ref : SN 640575Title : Earthwork; degradation classes and recommendations

Relatedness :National : REV/AMD SN 640575 (1977)

Subsector : B26 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA181988/0001 Project EstablishedICS :National Ref : PR NF G38-060Title : Textiles. Articles for industrial uses. Recommandation for the use of geotextiles and

related products. Installation. Specifications. Control of geotextiles and related products.



Subsector B27: WATERPROOFING MATERIALS

Subsector : B27 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA182115/0001 Project EstablishedICS :National Ref : PR NF P31-313Title : Roofing products - Concrete roofing tiles with longitudinal interlock, mountain class -

Definition, characteristics, marking



Subsector B31: HEATING SYSTEMS IN BUILDINGS

Subsector : B31 Registration Date : 2013-02-26Organization : ASRO Draft Issue Date : 2013-04-30Country : Romania Latest Date for Comments : 2013-07-30Project ID : 1907-113/0001 Project EstablishedICS : 91.140.10National Ref : SR 1907-1:2013Title : Heating plants. Design heat requirements computation for buildings. Computation

specificationsScope : This standard establishes how to determine the heat necessary for calculating civil and

industrial buildings, to design heating

Relatedness :National : REV/AMD SR 1907-1:1997

Subsector : B31 Registration Date : 2013-02-26Organization : ASRO Draft Issue Date : 2013-04-30

Country : Romania Latest Date for Comments : 2013-07-30Project ID : 1907-213/0001 Project EstablishedICS : 91.140.10National Ref : SR 1907-2:2013Title : Heating plants. Design heat requirements computation for buildings. Design

conventional indoor temperaturesScope : This standard Conventional standard specifies interior temperatures necessary for the

determination of calculation of building heat

Relatedness :National : REV/AMD SR 1907-2:1997


Subsector B32: PRECAST CONCRETE PRODUCTS

Subsector : B32 Registration Date : 2013-02-26Organization : UNICountry : ItalyProject ID : 73022672/0001 Project EstablishedICS : 91.080.40National Ref : U73022672Title : Durability of concrete works and precast concrete elements - Part 2 - Criteria for the

avoidance of alkali-silica reactionScope : The standard specifies the definitions, the list of aggressive actions and the istructions for

criteria for the avoidance of alkali-silica reaction in concrete works and in precast concrete elements.

Relatedness :National : REV/AMD UNI 11417-2:2012


Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2013-02-08Organization : SFS Draft Issue Date : 2013-01-25Country : Finland Latest Date for Comments : 2013-03-29Project ID : 0000E291/0001 Draft for public enquiryICS :National Ref :Title : Characteristics and requirement levels of masonry products in different applications

Relatedness :National : REV/AMD SFS 7001:2007

Subsector : B99 Registration Date : 2013-02-18Organization : ASICountry : AustriaProject ID : 00025558/0001 Project EstablishedICS : 91.010.20, 91.080.30, 91.080.40National Ref : ÖNORM B 2253Title : Mechanical processing of concrete and masonry - Drilling and cutting - Contract to

provide servicesScope : This ÖNORM contains procedural and contractual provisions governing the execution of

Scope : drilling and cutting of concrete and masonry work and other low-vibration processing methods, such as pressing and grinding, to buildings, structures or parts thereof in the construction, civil engineering and road construction.


Subsector : B99 Registration Date : 2013-02-18Organization : ASICountry : AustriaProject ID : 00025615/0001 Project EstablishedICS : 91.010.20National Ref : ÖNORM B 1801-4Title : Project management in construction and operation - Part 4: Calculation of building life

cycle costsScope : This Austrian Standard supports the calculation of life-cycle costing in all phases of the life

cycle of an object, especially in the early stages of property development (preparation phase, preliminary design phase and design phase according to ÖNORM B 1801-1). The same applies also for repairs and remodeling according to ÖNORM B 1801-2.


Subsector : B99 Registration Date : 2013-02-07Organization : NENCountry : NetherlandsProject ID : 50001800/0001 Project EstablishedICS : 93.030National Ref : NEN 3398:2013 Concept nlTitle : Sewerage systems outside buildings - Diagnostic research and assessment of the

condition of objectsScope : This standard gives directions for the inspection of sewers and the conversion of the

inspection results to maintenance urgency and repair or replacement urgency. The connected pipes are explicity excluded because their ownership and control does not always correspond to the ownership and control of the rest of the drainage and sewerage systems. The directions are intended to serve as a guide for the inspection of sewers and for the interpretation of the results.


Subsector : B99 Registration Date : 2013-02-07Organization : NENCountry : NetherlandsProject ID : 50001801/0001 Project EstablishedICS : 93.030National Ref : NEN 3399:2013 Concept nlTitle : Sewerage systems outside buildings - Classification system for visual inspection of

objectsScope : This standard imposes requirements for the classification of condition aspects of sewers, in

other words the specific image obtained of a sewer.

Relatedness :

National : New

Subsector : B99 Registration Date : 2013-02-01Organization : UNMZ Draft Issue Date : 2013-01-30Country : Czech Republic Latest Date for Comments : 2013-03-31Project ID : 73003413/0001 Project EstablishedICS :National Ref :Title : Symbols of quantities in geodesy and cartographyScope : The aim of the amendment Z1 is unification of contemporary legislation. Use of new

information in this area.

Relatedness :National : REV/AMD Amendment Z1 of ČSN 73 0402 (2010)


** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA181857/0001 Project EstablishedICS :National Ref : PR NF V09-005Title : Sensory analysis - Methodology - Guidelines for the preparation of samples for which

direct sensory analysis is not feasible


Subsector : C01 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA182054/0001 Project EstablishedICS :National Ref : PR NF V45-064Title : Transformed fishes - Canned mackerels - Specifications


Subsector : C01 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040869/0001 Project EstablishedICS :National Ref : PNE 155210Title : Fresh fruits. Controlled production. Mango.Scope : This standard establishes the requirements of a production system for mango crop for the

fresh market.


Subsector : C01 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040870/0001 Project EstablishedICS :National Ref : PNE 155211Title : Fresh fruits. Controlled production. Papaya.Scope : This standard establishes the requirements of a production system for papaya crop for the

fresh market.


Subsector : C01 Registration Date : 2013-02-01

Organization : AENORCountry : SpainProject ID : P0040882/0001 Project EstablishedICS :National Ref : PNE 155411-2Title : Fresh vegetables. Controlled production. Lettuce produced incorporating biological pest

control. Series II.Scope : It describes the specific aspects of a controlled production system in which biological

control is a requirement. It is applicable to lettuce produced both under protection and in the open air. The project incorporates requirements for homologation with the integrated production in the autonomic community of Murcia.


Subsector : C01 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040883/0001 Project EstablishedICS :National Ref : PNE 155412-2Title : Fresh vegetables. Controlled production. Broccoli produced incorporating biological pest

control. Series II.Scope : It describes the specific aspects of a controlled production system in which biological

control is a requirement. It is applicable to broccoli crop, both under protection and in the open air. The project incorporates requirements for homologation with the integrated production in the autonomic community of Murcia.


Subsector : C01 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040884/0001 Project EstablishedICS :National Ref : PNE 155425-2Title : Fresh vegetables. Controlled production. Escarole produced incorporating biological

pest control. Series II.Scope : It describes the specific aspects of a controlled production system in which biological

control is a requirement. It is applicable to escarole produced both under protection and in the open air. The project incorporates requirements for homologation with the integrated production in the autonomic community of Murcia.


Subsector : C01 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040885/0001 Project EstablishedICS :National Ref : PNE 155509-3

Title : Fresh fruits. Controlled production. Kiwifruit produced incorporating biological pest control methods. Series III.

Scope : It describes the specific aspects of an agricultural controlled production system in which biological pest control is a requirement. It is applicable to kiwi fruit being their fruits for the fresh market. The project incorporates requirements for homologation with the integrated production in the autonomic community of Galicia.


Subsector : C01 Registration Date : 2013-02-19Organization : TSECountry : TurkeyProject ID : tst02408/0001 Project EstablishedICS : 67.060National Ref :Title : RiceScope : This standard includes scurfy, husked rice, milled rice and parboiled rice. It is not applicable

to other derived from rice, rough rice and waxy rice


Subsector : C01 Registration Date : 2013-02-27Organization : TSECountry : TurkeyProject ID : tst06400/0001 Project EstablishedICS : 67.120.30National Ref :Title : European AnchovyScope : This standard applies to European anchovy to be supplied to the market as fresh and frozen

forms. It does not apply to European anchovy as smoked, canned and similary processed forms.


Subsector : C01 Registration Date : 2013-02-21Organization : TSECountry : TurkeyProject ID : tst13060/0001 Project EstablishedICS : 67.120.20National Ref :Title : Processed Turkey Carcass – ThingScope : This standart contains the identification, grading, characteristics sampling and presentation

of processed turkey thing meat



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2013-02-05Organization : TSECountry : TurkeyProject ID : t2007808/0001 Project EstablishedICS : 67.120.10National Ref :Title : Livestock Marking TagsScope : This standard covers livestock Marking Tags



Subsector C06: ESSENTIAL OILS

Subsector : C06 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040801/0001 Project EstablishedICS :National Ref : PNE 84306Title : Essential oils. Essential oil of rosemary (Rosmarinus officinalis L.)Scope : This standard specifies certain characteristics of the Essential oil of rosemary (Rosmarinues

officinalis L.) in order to facilitate assessment of its quality.

Relatedness :National : REV/AMD UNE 84306:2006


Subsector C11: TOBACCO

Subsector : C11 Registration Date : 2013-02-05Organization : TSECountry : TurkeyProject ID : t1013445/0001 Project EstablishedICS : 65.160National Ref :Title : Tobacco Products For WaterpipeScope : This standart includes tobacco products for waterpipe.



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2013-02-14Organization : UNMZ Draft Issue Date : 2013-06-30Country : Czech Republic Latest Date for Comments : 2013-09-30Project ID : 73003313/0001 Project EstablishedICS :National Ref : 73 6100-5Title : Road transport and traffic telematicsScope : This standard is the fifth part of the terminological standard on the Terminology of roads.

Its first three parts have already been published. The purpose of the extensive standard is to complement and incorporate new terminology from European standards. Part 3 introduces valid terms and definitions from CEN/TC 226 (Road equipment) standards. In the same way, the planned part 4 will incorporate terms from CEN/TC 227 (Road materials) standards. Owing to the close cooperation of CEN/TC 278 and ISO/TC 204, part 5 will compile terminology from both committees. The purpose of part 5 is to solidify the new field terminology in Czech language for uniform standards translation and terminology unification for national use.



Subsector F15: MATERIAL TESTING IN GENERAL

Subsector : F15 Registration Date : 2013-02-14Organization : DINCountry : GermanyProject ID : 06234140/0001 Project EstablishedICS :National Ref : 06234140Title : Testing of ceramic raw and basic materials - Terminology of heat insulation refractory

products


Subsector : F15 Registration Date : 2013-02-14Organization : DINCountry : GermanyProject ID : 06234141/0001 Project EstablishedICS :National Ref : 06234141Title : Solid recovered fuels - Drilling method for the analysis of heterogeneous material

systems with low density material



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2013-02-26

Organization : UNICountry : ItalyProject ID : 5000B650/0001 Project EstablishedICS : 03.120.99National Ref : U5000B650Title : Safety - World Class Manufacturing and safety integration in production processes -

Application guidelinesScope : The following temporary directory, declined below, expresses the abstract of TR, according

to safety objectives: 1. Premise; 2. Introduction; 3. Purpose and scope; 4. Definitions; 5. Total and consistent integration of various management areas; 6. Areas of intervention and related criteria and application guidelines for safety and human resources development; 7. Staff involvement and internal structures involvement; 8. Training; 9. Execution and operation; 10. Monitoring of execution and analysis of the results obtained; 11. Correttive actions; 12. Change of objectives and implementation


Subsector : F20 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA182110/0001 Project EstablishedICS :National Ref : PR NF X30-473Title : Household and related waste - Inspection of sorting equipment performance


Subsector : F20 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040826/0001 Project EstablishedICS :National Ref : PNE 192001-8Title : Inspection procedure for establishment affected by major-accident hazards involving

dangerous substances. Part 8: Assessment of the risk analysisScope : This standard develops the methodology to apply in order to assess the conformity of the

Risk analysis defined by the Regulation of Serious Accidents involving Dangerous Substances.


Subsector : F20 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040827/0001 Project EstablishedICS :National Ref : PNE 192001-9Title : Inspection procedure for establishments affected by major-accident hazards involving

dangerous substances. Part 9: Documentary assessment of the internal emergency plan

Scope : This Standard develops the methodology to apply in order to assess the conformity of the Self-protection Plan, defined as Internal Emergency Plan in the Regulation of Serious Accidents involving Dangerous Substances


Subsector : F20 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040828/0001 Project EstablishedICS :National Ref : PNE-EN 192001-10Title : Inspection procedure for establishments affected by major-accident hazards involving

dangerous substances. Part 10: Evaluation of the location of the emergency planScope : This standard develops the methodology to apply in order to assess the veracity and the

implementation of the Self- Protection Plan, defined as internal Emergency Plan in the Regulation of Serious Accidents involving Dangerous Substances.



dangerous substances. Part 11: Inspection periodicallyScope : This standard develops the methodology to apply in order to perform the periodical

inspection defined in the Regulation of Serious Accidents involving Dangerous Substances



dangerous substances. Part 12: Monitoring of emergency simulationScope : This standard develops the actions needed for the observation and assessment of

simulation of the emergency plan developed by the companies that are under the regulation of serious accidents involving dangerous substances


Subsector : F20 Registration Date : 2013-02-01

Organization : AENORCountry : Spain

Project ID : P0040831/0001Project

EstablishedICS :National Ref : PNE 192001-13Title : Inspection procedure for establishments affected by major-accident hazards involving

dangerous substances. Part 13: Monitoring of regulatory compliance of industrial safetyScope : This standard develops the methodology to apply in order to assess if the industrialist has

adopted and applied the instructions and procedures needed for the design, construction, explotation and maintenance of their facilities to fulfill the legal regulatory requirements.



Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2013-02-07Organization : NENCountry : Netherlands

Project ID : 50001796/0001Project

Established

ICS :03.100, 03.120.10, 29.060.20, 29.130, 75.200

National Ref : NTA 8120:2013 Concept nlTitle : Asset management - Requirements for a safety, quality and capacity management

system for electricity and gas network operationsScope : This technical agreement contains specifications for a safety and quality management

system for electricity and gas network operations.


Subsector : F99 Registration Date : 2013-02-07Organization : NENCountry : NetherlandsProject ID : 50001799/0001 Project EstablishedICS : 03.100.01, 03.120.10National Ref : NTA 8121:2013 Concept nlTitle : Maintenance Knowledge managementScope : To exploit plants and installations on a reliable, safe, efficient and environment friendly

way, maintenance and competent personnel are key conditions. Knowledge management is of high importance to guarantee knowledge



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2013-02-14Organization : DINCountry : GermanyProject ID : 11200967/0001 Project EstablishedICS :National Ref : 11200967Title : Bicycles - Lighting equipment and dynamos



Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2013-02-18Organization : ASICountry : AustriaProject ID : 00025534/0001 Project EstablishedICS : 97.140National Ref : ÖNORM A 1600-2Title : Furniture - General - Part 2: Designation and markingScope : This ÖNORM is effective for the designation and marking of furniture.


Subsector : H09 Registration Date : 2013-02-18Organization : ASICountry : AustriaProject ID : 00025557/0001 Project EstablishedICS : 97.140National Ref : ÖNORM A 1600-1Title : Furniture - Part 1: Types and classificationScope : This ÖNORM specifies the types and classification of furnitures.



Subsector H14: CARAVANS

Subsector : H14 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA181867/0001 Project EstablishedICS :National Ref : PR NF S56-300Title : Caravans - Elementary technical inspection without dismanting



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I01: SCREW THREADS

Subsector : I01 Registration Date : 2013-02-07Organization : TSECountry : TurkeyProject ID : tst01994/0001 Project EstablishedICS : 21.060.10National Ref :Title : Fish Bolts With Metric Thread Scope : THis standard covers round headed metric bolts and their nuts.

Relatedness :National : NewEuropean : Modified DIN 5903 - 1: 2011

Subsector : I01 Registration Date : 2013-02-07Organization : TSECountry : TurkeyProject ID : tst01994/0001 Project EstablishedICS : 21.060.10National Ref :Title : Fish Bolts With Metric Thread Scope : THis standard covers round headed metric bolts and their nuts.

Relatedness :National : NewEuropean : Modified DIN 5903 - 2: 2011

Subsector : I01 Registration Date : 2013-02-12Organization : TSECountry : TurkeyProject ID : tst03832/0001 Project EstablishedICS : 21.060.20National Ref :Title : Square Nuts, Metric Scope : This standard covers square nuts, metric

Relatedness :National : NewEuropean : Modified DIN 557:1994

Subsector : I01 Registration Date : 2013-02-12Organization : TSECountry : TurkeyProject ID : tst03832/0001 Project EstablishedICS : 21.060.20National Ref :Title : Square Nuts, Metric Scope : This standard covers square nuts, metric


Subsector : I01 Registration Date : 2013-02-12Organization : TSE

Country : TurkeyProject ID : tst03832/0001 Project EstablishedICS : 21.060.20National Ref :Title : Square Nuts, Metric Scope : This standard covers square nuts, metric


Subsector : I01 Registration Date : 2013-02-12Organization : TSECountry : TurkeyProject ID : tst04091/0001 Project EstablishedICS : 21.060.20National Ref :Title : Nuts for T- Slots, Metric Scope : Nuts for T-slots according to this norm are clamping elements used in T-slots according to

DIN 650.



Subsector I13: GAS CONTAINERS

Subsector : I13 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA181851/0001 Project EstablishedICS :National Ref : PR NF E29-795Title : Gas cylinders. Conditioning of halogenated hydrocarbons. Filling and draining method.

Reclaimation of halogenated hydrocarbons



Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2013-02-18Organization : ASICountry : AustriaProject ID : 00025554/0001 Project EstablishedICS :National Ref : ONR 195253Title : Method of determining the dose proportion due to natural background radiation in case

of external radiationScope : In this ONR a method is defined how the level of natural background in assessing the

exposure of persons who deal in the course of their activities with artificial radiation sources or working on to natural radiation sources is considered. The ONR is aimed at experts performing such assessments based on dose rate measurements or results from

Scope : dose measurement institutes empowered by radiation protection law.


Subsector : I19 Registration Date : 2013-02-14Organization : DINCountry : GermanyProject ID : 06234148/0001 Project EstablishedICS :National Ref : 06234148Title : Measures of administrative character for conservation of criticality safety in nuclear

facilities excluding reactors


Subsector : I19 Registration Date : 2013-02-26Organization : UNICountry : ItalyProject ID : 54032210/0001 Project EstablishedICS : 27.120.20National Ref : U54032210Title : Nuclear plants - Particular requirements for the application of ISO 9001:2008 in the

nuclear field

Scope : This document provides requirements and recommendations relating to quality management systems applied to decommissioning field, particularly referring to products and/ or services relevant to nuclear safety. Complementing and not replacing, the requirements of ISO 9001:2008 (reported in the text within the boxes). The requirements of this document apply to "Organizations operating in the nuclear field.", in particular in the activities of "decommissioning", at various levels of the production chain (Operator, suppliers, sub-suppliers). Grading application of each requirement is based on "Graded Approach" of the IAEA and, with respect to supplier, is specified by the customer during qualifying process and in the contract.



Subsector I99: UNDETERMINED

Subsector : I99 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040769/0001 Project EstablishedICS :National Ref : PNE 60715-1Title : Flexible hoses for connection of installations to burning appliances assemblies of

flexible connection with security socket and thread. Part 1: Spirally-metallic.Scope : This standard aims to define the general and operation characteristics of spirally-metallic

flexible connection sets with safety plug and thread for the connection of gas appliances to the receiving gas installation.

Relatedness :

National :REV/AMD UNE 60715-1:1992, UNE 60715-1/1M:2002, UNE 60715-1/2M:2004, UNE 60715-1:1992/3M:2006

Subsector : I99 Registration Date : 2013-02-27Organization : TSECountry : TurkeyProject ID : tst12973/0001 Project EstablishedICS : 65.040.20National Ref :Title : Silos-Cereal Storage-Terms And definationScope : This standard includes relating to terms and defination for silos (Cereal storage)



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M08: LIGHT ALLOYS

Subsector : M08 Registration Date : 2013-02-22Organization : TSECountry : TurkeyProject ID : tst07677/0002 Project EstablishedICS : 77.120.10National Ref :Title : Corrugated Sheets – Aluminium and aluminium alloysScope : This standard specifies the Corrugated Sheets which has thickness betwenn 0,45mm and

1,60 mm and made of aluminium and aluminium alloys. This standard does not scope conditions and place of use.

Relatedness :National : NewEuropean : Modified ASTM B209:2004



Relatedness :National : NewEuropean : Modified BS 1470:1987



Relatedness :National : NewEuropean : Modified ISO 209-1:1989


Scope : 1,60 mm and made of aluminium and aluminium alloys. This standard does not scope conditions and place of use.

Relatedness :National : NewEuropean : Modified ISO 209-2:1989


Subsector M14: NICKEL

Subsector : M14 Registration Date : 2013-02-07Organization : TSECountry : TurkeyProject ID : tst08889/0001 Project EstablishedICS : 77.120.40National Ref :Title : Wrought Nickel Alloys With Chromium Chemical CompositionScope : This standard specifies chemical composition of semi-products made of wrought nickel

alloys with chromium.



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2013-02-14Organization : DINCountry : GermanyProject ID : 07400213/0001 Project EstablishedICS :National Ref : 07400213Title : Paper and pulps - Relevant environmental aspects and environmental parameters for

paper


Subsector : N01 Registration Date : 2013-02-13Organization : TSECountry : TurkeyProject ID : tst12728/0001 Project EstablishedICS : 55.040, 85.060National Ref :Title : Paper- Waste (Schrenz) papes for corrugated board productionScope : This standard covers recycled papers used for manufacturing the corrugated fiberboard


Subsector : N01 Registration Date : 2013-02-13Organization : TSECountry : TurkeyProject ID : tst12731/0001 Project EstablishedICS : 55.040, 85.060National Ref :Title : Papers- Straw fluting paper for corrugated board productsScope : This standard specifies description, types and characteristics, sampling and testing and with

marketing of straw fluting paper used in the corrugated fiberboard.


Subsector : N01 Registration Date : 2013-02-13Organization : TSECountry : TurkeyProject ID : tst12732/0001 Project EstablishedICS : 55.040, 85.060National Ref :Title : Papers- Test liner papers- For corrugated fiberboard productionScope : This standard specifies description types and characteristics sampling and testing and with

marketing of test liner papers used for manufacturing corrugated fiberboard.


Subsector : N01 Registration Date : 2013-02-13Organization : TSECountry : TurkeyProject ID : tst12733/0001 Project EstablishedICS : 55.040, 85.060National Ref :Title : Papers- Semi chemical fluting paper for corrugated fiberboard. Scope : This standard specifies description types and characteristics, sampling and testing and with

marking of semi chemical flutting papers used in corrugated board production.



Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2013-02-18Organization : ASICountry : AustriaProject ID : 00025596/0001 Project EstablishedICS : 75.160.20National Ref : ÖNORM C 1109Title : Liquid fuels - Domestic fuel oil - Gasoil for heating purposes - RequirementsScope : The requirements and test methods specified in this ÖNORM apply to "Heizöl extra leicht"

("Domestic fuel oil") and "Heizöl extra leicht - schwefelfrei" ("Domestic fuel oil - sulphur free"). With regard to the sulphur content two qualities are specified in this standard ("Heizöl extra leicht" and "Heizöl extra leicht - schwefelfrei"). "Heizöl extra leicht - schwefelfrei" is suitable only for the use in such burner systems for which an appropriate release has been provided by the burner manufacturers. In certain systems "Heizöl extra leicht - schwefelfrei" may be used alone according to the manufacturers specifications or local waste water regulations.


Subsector : N03 Registration Date : 2013-02-18Organization : SIS Draft Issue Date : 2013-02-18Country : Sweden Latest Date for Comments : 2013-04-18Project ID : 00155116/0001 Project EstablishedICS : 75.080National Ref : 155116Title : Petroleum products – Determination of aromatics in diesel fuel – Mono-and di-aromatic

components and PAHScope : The standard specifies a method for the determination of mono-, di-, tri-, and higher

aromatics in diesel fuel and petroleum distillate with a boiling point between 90 ° C and 430 ° C without added FAME. The method is an extension of a method developed by the Institute of Petroleum labelled IP 548/07. Both the total content of aromatics content and poly aromatic hydrocarbons (PAHs) in diesel fuel without fatty acid methyl esters (FAME) is determined in accordance with standard liquid chromatographic method (HPLC). The development means that the direction of flow through the column after a certain time is changed so that PAH compounds are gathered into a narrow band. Lower levels of PAHs (tri and higher) can hereby be determined

Relatedness :

National : New

Subsector : N03 Registration Date : 2013-02-22Organization : BSICountry : United KingdomProject ID : 01300569/0001 Project EstablishedICS :National Ref : BS 2000-112:2005+A1Title : Methods of test for petroleum and its products.Determination of corrosiveness to copper

of lubricating grease. Copper strip method. Amendment


Subsector : N03 Registration Date : 2013-02-22Organization : BSICountry : United KingdomProject ID : 01300570/0001 Project EstablishedICS :National Ref : BS 2000-121:2005+A1Title : Methods of test for petroleum and its products. Determination of oil separation from

lubricating grease. Pressure filtration method. Amendment


Subsector : N03 Registration Date : 2013-02-22Organization : TSECountry : TurkeyProject ID : 0tst7840/0001 Project EstablishedICS : 75.100National Ref :Title : Corrosiveness and oxidations stability of hydraulic oils; aircraft turbine engine lubricants,

and other highly refined oils Scope : This standard specifies a test method for the determination of corrosiveness and oxidations

stability of hydraulic oils, aircraft turbine engine lubricants, and other highly refined oils.

Relatedness :National : NewInternational : Modified ASTM D4636:2009

Subsector : N03 Registration Date : 2013-02-27Organization : TSECountry : TurkeyProject ID : tst01765/0001 Project EstablishedICS : 75.100National Ref :Title : Method for determination of phosphours in lubricating oils and additives Scope : This standard specifies a test method for the determination of phosphours in lubricating

oils and additives.

Relatedness :

National : NewInternational : Modified ASTM D1091:2011

Subsector : N03 Registration Date : 2013-02-20Organization : TSECountry : TurkeyProject ID : tst02178/0001 Project EstablishedICS : 75.080National Ref :Title : Petroleum products - Fuels (class F) - Liquefied petroleum gases - SpecificationsScope : This standard gives specifications and test methods for liquifed petroleum gases for

domestic and industrial use. It doesn't cover automative LPG.

Relatedness :National : NewInternational : Modified ISO 9162:1989

Subsector : N03 Registration Date : 2013-02-22Organization : TSECountry : TurkeyProject ID : tst02549/0001 Project EstablishedICS : 75.160National Ref :Title : Determination of the burning quality of kerosine Scope : This standard specifies a test method for the determination of the burning quality of

kerosine .


Subsector : N03 Registration Date : 2013-02-27Organization : TSECountry : TurkeyProject ID : tst07838/0001 Project EstablishedICS : 75.080National Ref :Title : Viscosity-Temperature relations for liquid petroleum products Scope : This standard gives information on Viscosity-Temperature relations for liquid petroleum

products.


Subsector : N03 Registration Date : 2013-02-27Organization : TSECountry : TurkeyProject ID : tst08259/0001 Project EstablishedICS : 71.040National Ref :Title : Test method for reaction treshold temperature of liquid and solid materials. Scope : This standard specifies a test method for the determination of reaction treshold

temperature of liquid and solid materials.


Subsector : N03 Registration Date : 2013-02-22Organization : TSECountry : TurkeyProject ID : tst09503/0001 Project EstablishedICS : 75.160National Ref :Title : Test method for smoke density in flue gases from burning distillate fuels Scope : This standard specifies a test method for the determination of smoke density in flue gases

from burning distillate fuels.



Subsector N04: REFRACTORIES

Subsector : N04 Registration Date : 2013-02-26Organization : UNICountry : ItalyProject ID : 1325D87C/0001 Project EstablishedICS : 13.030.50National Ref : E1325D87CTitle : Plastic raw-secondary materials - Fillers obtained from grinding of production and/or

post- consumer waste of reinforced plastics composites - Part 13: Requirements and test methods

Scope : The standard defines the requirements of the ground, composite materials, thermosetting or thermoplastic fiber-reinforced thermosetting plastics or laminates HPL (according to the UNI EN 438) intended to be used as an inert filler in the processes of extrusion and / or molding of thermosetting and thermoplastic materials, raw materials or thermoplastic materials coming from recycling, or in the production of compounds of plastics.



Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2013-02-11Organization : TSECountry : TurkeyProject ID : tst11988/0001 Project EstablishedICS : 59.080.60National Ref :Title : Textile floor coverings - Machine made carpetsScope : This Standard covers the spesifications and definition classification, sampling and testing of

machine carpets which is a sub category of textile floor coverings.


International : Not Equivalent to SASO 1167:2007


Subsector N07: SAWN TIMBER

Subsector : N07 Registration Date : 2013-02-14Organization : DINCountry : GermanyProject ID : 04200679/0001 Project EstablishedICS : 71.100.50National Ref : DIN 52161-7Title : Testing of wood preservatives - Detection of wood preservatives in wood - Part 7:

Determination of the content of copper bearing wood preservatives


Subsector : N07 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA182053/0001 Project EstablishedICS :National Ref : PR NF B53-801Title : Wood - Appearance grading of sawn sweet chestnut : boules, select unedged timbers,

strips and square edged timbers



Subsector N09: PLASTICS

Subsector : N09 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA181856/0001 Project EstablishedICS :National Ref : PR NF T56-123Title : Cellular products of elastomers or plastics - Determination of water absorption of cellular

materials


Subsector : N09 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040864/0001 Project EstablishedICS :National Ref : PNE 53199Title : Plastics. Polymeric materials, cellular flexible. Determination of solvents swellingScope : This standard specifies a method to determination of solvents swelling of polymeric

materials cellular flexible


Subsector : N09 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040866/0001 Project EstablishedICS :National Ref : PNE 53234Title : Plastics. Cellular polymeric flexible materials. Determination of tear strength. Radial tear

meted.Scope : This standard specifies a method of determining the tear strength of cellular polymeric

flexible materials by radial tear.


Subsector : N09 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040867/0001 Project EstablishedICS :National Ref : PNE 53967 INTitle : Plastics. Flexible polyurethane foam. Tolerances in specifications of ether polyurethane

block foams.Scope : To shown to customer and consumers deviations from the values of main physical

properties of foam, due to conditions during curate and cutting procedure.

Relatedness :National : REV/AMD UNE 53967:2003 IN


** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2013-02-14Organization : DINCountry : GermanyProject ID : 00100910/0001 Project EstablishedICS :National Ref : 00100910Title : Determination of aircraft noise exposure at airports


Subsector : S01 Registration Date : 2013-02-26Organization : UNICountry : ItalyProject ID : 20001352/0001 Project EstablishedICS : 17.140.30National Ref : U20001352Title : Acoustics - Evaluation of the uncertainty of measurements and calculations in acoustics

- Part 2: Compliance with specificationsScope : The standard specifies the rules to assess whether the result of an acoustic measurement is

conforming with a given tolerance interval, or with a limiting value, taking into account the measurement uncertainty. The methods prescribed by the legislation will override the one described in this standard. In the absence of such legislation in the field of applied acoustics the standard specifies how to assess the conformity with specifications.


Subsector : S01 Registration Date : 2013-02-22Organization : TSECountry : TurkeyProject ID : tst10713/0001 Project EstablishedICS : 17.140.30National Ref :Title : Traffic Noise and The Measures for It's Preventation Scope : This standard covers the level of noise in traffic in city road and reduce of it.



Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT

Subsector : S04 Registration Date : 2013-02-18Organization : SIS Draft Issue Date : 2013-02-18Country : Sweden Latest Date for Comments : 2013-04-18Project ID : 00872500/0001 Project EstablishedICS :National Ref : 872500Title : Quality of care for elderly people with extensive needs in ordinary and special housing



Subsector S05: DENTISTRY

Subsector : S05 Registration Date : 2013-02-07Organization : NENCountry : NetherlandsProject ID : 50001797/0001 Project EstablishedICS : 11.060.01National Ref : NEN 9313:2013 Concept enTitle : Diagnostic codes for dentistryScope : This standard describes the terms for dental diagnoses and standardized coding to be used

in quality guidelines in oral healthcare.



Subsector S06: VIBRATION & SHOCK

Subsector : S06 Registration Date : 2013-02-26Organization : UNICountry : ItalyProject ID : 20022440/0001 Project EstablishedICS : 17.160National Ref : U20022440Title : Antivibrating elements - Elastomeric mats for railway/tramway tracks - Qualification and

check tests to determine their mechanical characteristics and performance parametersScope : This standard is applicable to elastomeric mats, currently used in the construction of

railway/tramway tracks both as sub-ballast and as sub-floating concrete slab. This standard defines procedures to be followed in carrying out laboratory mechanical and performance tests and provides information required for the processing and the evaluation of test results. The tests recommended for the determination of mechanical characteristics are: static test, test simulating the actual load time-history due to the train (for what concerns rise time and duration and therefore function of train speed), dynamic test with sinusoidal forces. The test required to determine parameters related to the mat performance during its life are: permanent load test, fatigue test (mechanical aging), test to simulate ambient actions (ice, water, temperature, ozone, installation, etc.).



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA182111/0001 Project EstablishedICS :National Ref : PR NF T90-333Title : Water quality - Sampling of aquatic macro-invertebrates in shallow freshwaters


Subsector : S09 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA182112/0001 Project EstablishedICS :National Ref : PR NF T90-354Title : Water quality - Determination of the Diatoma Biological Index (DBI)


Subsector : S09 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA182113/0001 Project EstablishedICS :National Ref : PR XP T90-714Title : Water quality


Subsector : S09 Registration Date : 2013-02-07Organization : TSECountry : TurkeyProject ID : tst09360/0001 Project EstablishedICS : 13.060.50National Ref :Title : Water Quality-Determination of Silica-With Spectrophotometric Heteropoly Blue MethodScope : This standard is about the determination of silicon which reacts with molybolate by using

spectrophotometric heteropoly blue method.

Relatedness :National : NewInternational : Modified ASTM 859:2005


Subsector S15: SURGICAL INSTRUMENTS

Subsector : S15 Registration Date : 2013-02-14Organization : DIN

Country : GermanyProject ID : 02702514/0001 Project EstablishedICS : 11.040.30National Ref : DIN 58299Title : Toothings (Serrations) for surgical instruments - Profile angles, groove distances



Subsector S24: SOIL QUALITY

Subsector : S24 Registration Date : 2013-02-18Organization : ASICountry : AustriaProject ID : 00025556/0001 Project EstablishedICS : 13.080.10National Ref : ÖNORM L 1083Title : Chemical analyses of soils - Determination of acidity (pH value)Scope : ÖNORM these describes a method for determining the current and the potential acidity of

soils.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040772/0001 Project EstablishedICS :National Ref : PNE 27491Title : Civil shipbuilding and ship repairing. Selective lists. Piping and fittings: Cooper-nickel

(CUNI) tubesScope : This standard defines the selection of copper-nickel (CUNI) pipes (DIN) of preferred use for

the fabrication and assembling of pipe systems and services in sea-going vessels and other marine crafts (e.g. offshore units) specifying the geometry, dimensions, and material for these pipes, fulfilling their normal service requirements.


Subsector : T01 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040773/0001 Project EstablishedICS :National Ref : PNE 27657Title : Civil shipbuilding and ship repairing. Standardised components. Pipe supports: U

shaped flat bar pipe support with flat bar pipe clampScope : This standard specifies the design, dimensions and technical requirements for U shaped flat

bar pipe supports with flat bar pipe clamp suitable for installation on sea-going vessels fulfilling normal service requirements.

Relatedness :National : REV/AMD UNE 27657-1:1977, UNE 27657-3:1977

Subsector : T01 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040774/0001 Project EstablishedICS :National Ref : PNE 27658Title : Civil shipbuilding and ship repairing. Standardised components. Pipe supports: Long

angle bar pipe support with flat bar pipe clampScope : This standard specifies the design, dimensions and technical requirements for long angle

bar pipe supports with flat bar pipe clamp suitable for installation on sea-going vessels fulfilling normal service requirements.


Subsector : T01 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040775/0001 Project EstablishedICS :

National Ref : PNE 27659Title : Civil shipbuilding and ship repairing. Standardised components. Pipe supports: Shot

angle bar pipe support with flat bar pipe clampScope : This standard specifies the design, dimensions and technical requirements for short angle

bar pipe supports with flar bar pipe clamp suitable for installation on sea-going vessels fulfilling normal service requirements.


Subsector : T01 Registration Date : 2013-02-01Organization : AENORCountry : SpainProject ID : P0040776/0001 Project EstablishedICS :National Ref : PNE 27662Title : Civil shipbuilding and ship repairing. Standardised components. Pipe supports: One leg

type "O" flat bar pipe support with flat bar pipe clampScope : This standard specifies the design, dimensions and technical requirements for one leg type

"O" flat bar pipe supports with flat bar pipe clamp suitable for installation on sea-going vessels fulfilling normal service requirements.



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2013-02-28Organization : AFNORCountry : FranceProject ID : FA181842/0001 Project EstablishedICS :National Ref : PR NF R41-116Title : Road trailers - Elementary technical estimation without dismantling - Safety and

definition of estimation points



Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2013-02-18Organization : ASICountry : AustriaProject ID : 00025574/0001 Project EstablishedICS : 43.040.65, 71.100.40National Ref : ÖNORM V 5124Title : Cleaning and antifreezing liquids for windscreen and headlamp washer systems of road

vehiclesScope : This ÖNORM applies to cleaning and antifreezing liquids which are used as additive in

washing liquid (water) in windshield washer systems including spray nozzles to serve

Scope : antifreezing and to improve the cleaning of the windshild and headlamps. This Austrian Standard provides for the marking ÖNORM V 5124 geprüft.


Subsector : T03 Registration Date : 2013-02-12Organization : TSECountry : TurkeyProject ID : tst04364/0001 Project EstablishedICS : 43.040.50National Ref :Title : Road vehicles – Steel rimsScope : This standard specifies steel rims for tyres of road vehicles specified in TS 4457, including

passenger cars, and trailors, commercial vehicles, agricultural tractors and machines, industrial vehicles, earth moving machines and handcats.








Subsector : T03 Registration Date : 2013-02-12Organization : TSECountry : Turkey

Project ID : tst04364/0001 Project EstablishedICS : 43.040.50National Ref :Title : Road vehicles – Steel rimsScope : This standard specifies steel rims for tyres of road vehicles specified in TS 4457, including


Relatedness :National : NewEuropean : Modified ETRTO:2012



Relatedness :National : NewEuropean : Modified TSE ECE R 124:2008







International : Modified ISO 4251-3:2006

Subsector : T03 Registration Date : 2013-02-12Organization : TSECountry : TurkeyProject ID : tst08987/0001 Project EstablishedICS : 43.020, 43.040, 43.040.50National Ref :Title : Road vehicles – Cast light alloy rims for cars Scope : This standard specifies cast light alloy rims for pnoumatic tyres of road vehicles specified in

TS 4457, including passenger cars and trailors.










Relatedness :

National : NewEuropean : Modified TSE ECE R 124:2008






Relatedness :National : NewInternational : Modified ISO 4000-2:2007


Subsector T04: TYRES

Subsector : T04 (Secondary Subsector)

Registration Date : 2013-02-12

Organization : TSECountry : TurkeyProject ID : tst04364/0001 Project EstablishedICS : 43.040.50National Ref :Title : Road vehicles – Steel rimsScope : This standard specifies steel rims for tyres of road vehicles specified in TS 4457, including





Organization : TSECountry : TurkeyProject ID : tst04364/0001 Project Established

ICS : 43.040.50National Ref :Title : Road vehicles – Steel rimsScope : This standard specifies steel rims for tyres of road vehicles specified in TS 4457, including

















Relatedness :National : NewEuropean : Modified TSE ECE R 124:2008










Relatedness :National : NewInternational : Modified ISO 4251-3:2006


Registration Date :

Date post:	13-Feb-2021
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

Monthly Notifications Register - SUTN · 2013. 3. 7. · International : Modified ACI 311.1R:2007...

Documents