www.klinkmann.com
568
cex-EP3
MosaicTM
screw terminals - control units and DP switches
740 36 front view
740 36 back view
740 30 6744 30 6744 31 740 42
Pack Cat.Nos Switches 10 A - 250 V±
Single module mechanisms 1 module 22.5 x 45 mm 10 740 00 1-way switch 10 740 01 2-way switch
10 740 02 2-way switch with indicator Use lamps Cat.Nos 899 01/02/06/07 (p. 580)
Two module mechanisms 2 modules 22.5 x 45 mm 10 740 10 1-way switch 10 740 11 2-way switch 10 740 21 Intermediate switch 10 740 12 2-way switch with indicator
Use lamps Cat.Nos 899 01/02/06/07 (p. 580)
1 740 15 2-way indicator switch without neutral 6 A - 250 V± - 60 W min.
10 740 20 Double pole switch
Switches 16 A - 250 V± Single module mechanisms 1 module 22.5 x 45 mm 10 740 05 1-way switch 10 740 06 2-way switch
10 740 07 2-way switch with indicator Use lamps Cat.Nos 899 01/02/06/07 (p. 580)
10 740 08 2-way switch with indicator and label-holder
Use lamps Cat.Nos 899 01/02/06/07 (p. 580)
Switches 20 A - 250 V± Single module mechanisms 1 module 22.5 x 45 mm 10 740 35 1-way switch 10 740 36 2-way switch
10 740 37 2-way switch with indicator Use lamps Cat.Nos 899 01/02/06/07 (p. 580)
Only available
until 2010
Pack Cat.Nos Push-buttons 6 A - 250 V± Single module mechanisms 1 module 22.5 x 45 mm 10 740 30 1-way push-button 10 740 31 2-way push-button
10 740 32 2-way push-button with indicator Use lamps Cat.Nos 899 01/02/06/07 (p. 580)
10 740 33 2-way push-button with label-holder Can be lit with lamps
10 6744 30 Push-button with bell symbol
Two module mechanisms 2 modules 22.5 x 45 mm 10 740 40 1-way push-button
10 740 42 2-way push-button with indicator
Use lamps Cat.Nos 899 01/02/06/07 (p. 580) 10 740 43 2-way push-button
with label-holder Can be lit with lamps
10 6744 31 Push-button with bell symbol
New Mosaic range (p. 790, 791)
www.klinkmann.com
569
cex-EP3
MosaicTM
dimmersMosaicTM
screw terminals - double pole switches
740 69 740 54
Only available
until 2010 Only available
until 2010
Double pole switches 45 A - 250 V± BS Type boxes Cover plates (see p. 581-584) 2 modules
1 gang 10 6746 40 DP switch - white rocker 10 6746 41 DP switch + neon - red rocker 10 6746 42 DP switch + neon - white rocker
2 gang Conform to BS 3676: Part 1 5 740 69 DP switch + neon
Pack Cat.Nos Dimmers 230 V± - 50 Hz
Conform to BS EN 550 14 For installation in place of a flush-mounted switch in box depth 40 mm
2 modules Push-button dimmer 1 744 06 With an on/off button and a
separate +/- button for dimming With dimming level memory (can be cancelled)
Controls and dims: 40 to 300 W incandescent and halogen lamps 230 VA, and ELV halogen lamps with ferromagnetic and electronic transformer Can be controlled remotely using non-illuminated push-buttons or can be used as a 2-way switch without changing the second 2-way switch (configurable operation)
2 modules Rotary dimmer 1 744 05 Operates:
incandescent lamps 230 VA
ferromagnetic transformer
2 modules Touch dimmer 1 744 75 Operates:
halogen lamps 230 VA
ferromagnetic transformer Can be piloted via non illuminated push-buttons for on/off and cyclic dimming
2 modules Power rotary dimmer 1 744 16 Operates:
and halogen lamps 230 VA
lamps with ferromagnetic transformer and compensator Cat.No 401 39 (p. 180) Cannot be combined with other Mosaic mechanisms Supplied complete
2 modules Rotary dimmer 0 - 10 V 1 744 04 For switching on/off and dimming
fluorescent lamps with dimmable ballast 0 - 10 V
744 06 744 16744 05
Pack Cat.Nos Double pole switches 20 A
Two module mechanisms 2 modules 22.5 x 45 mm 10 740 50 Double pole switch
10 740 51 Double pole switch with indicator Use lamps Cat.Nos 899 01/02/06/07 (p. 580)
10 740 54 Double pole switch with indicator
Use lamps Cat.Nos 899 01/02/06/07 (p. 580)
New Mosaic range (p. 790, 791)
www.klinkmann.com
570
cex-EP3
MosaicTM
lighting control, automatic switches
740 14744 20 744 26 744 27
Pack Cat.Nos Automatic switches 230 V± - 50/60 Hz
Screw connection With override push buttons for switching the lighting
on and off manually Infrared detection, detection distance: 10 m max Horizontal detection angle: 180° Adjustable detection sensitivity Luminosity threshold: 3 to 1000 lux Time delay adjustable from 1 s to 16 min Cycle repeated as long as movement is detected Remote manual control possible with N/C push-button Integrated self-protection against overloads and short-circuits Box: min. 40 mm deep
2 modules With manual on/off function 1 744 26 No neutral, 2-wire connection
Operates: 40 to 300 W incandescent and halogen lamps 230 VA, and ELV halogen lamps with ferromagnetic and electronic transformer. For installation in place of a switch, with no additionnal wiring
1 744 27 With neutral, 3-wire connection Operates: - Up to 1000 W incandescent and halogen lamps 230 VA - Up to 500 VA ELV halogen lamps with ferromagnetic and electronic transformer Can control ventilation (up to 100 VA)
2 modules Totally automatic control 1 744 72 With neutral, 3-wire connection
Operates: - 1000 W incandescent and halogen lamps 230 VA - 500 VA ELV halogen lamps wit ferromagnetic and electronic transformer - 500 VA fluorescent lamps Can control 100 VA ventillation - Up to 500 VA fluorescent lamps
Pull-cord mechanisms
250 VA - with indicator 2 modules Use lamps Cat.Nos 899 01/02/06/07 (p. 580) 10 740 14 Two-way pull-cord switch 10 A 10 740 44 Push-button 6 A 10 898 05 Pull-cord accessory 1.5 m length
2 modules
Single pole latching relay
1 744 42 10 A - 250 VA - 50/60 Hz With integrated push-button Intensity 0.04 A
2 modules
Buzzer
10 766 41 230 VA
DIN Rail mounting dimmers (p. 180)
Pack Cat.Nos Time delay switch 2 modules 1 744 20 Conforms to interference
suppression standards EN 55014
Operates: - 1000 W incandescent and halogen 230 V
- 1000 VA fluorescent lamps - 1000 VA ELV halogen lamps with ferromagnetic or electronic transformer Adjustable from 1 to 20 min. (for toilets, staircases, lighting cellars from the main house) Remote control using push-buttons (non-illuminated) Enables the switch to be used as a timer Neutral must be distributed Equiped with Led Use lamps Cat.Nos 899 01/02/06/07 (p. 580)
Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
571
cex-EP3
MosaicTM
ancillary mechanismsMosaicTM
control units, ventilation and heating controland roller blinds controllers
740 61 744 35 740 25
Electronic room thermostat
Adjustment range from 5 °C to 30 °C Adjustment precision ± 0.5 °C Control knob with index and adjustable segments for min. and max. settings Power supply 230 VA - 50/60 Hz One volt-free changeover contact output
- 8 A - 250 VA, resistive circuit - 2 A - 250 VA, inductive circuit
From 1 mA min. to 500 mA max. 12 to 48 VA - 12 to 24 V=
Suitable for controlling heated ceilings 2 modules and underfloor heating 1 744 35 Thermostat
2 modules
Rotary speed controller for fan
1 40 to 400 VA limit switch For progressive speed control of ceiling fan
1 740 28 AC speed control 4 positions
Emergency stop push-buttons
2 modules 10 A - 250 VA 1 740 60 Emergency stop mushroom
head push-button Unlock with No 455 key type N/O + N/C
1 740 63 Emergency stop Stay put 1/4 turn release N/O + N/C contact
Pack Cat.Nos Key-operated switches
6 A - 250 VA Single pole switch
2 modules Supplied with key No 601 type 1 740 61 3 position switch
2 N/C + 1 N/O Key removable all 3 positions
Standard roller blinds control
2 modules Double push-button 10 740 25 For control via automatic
box (N/O mechanism) 6 A - 250 VA
2 modules Double switch 10 740 26 For direct control of a motor
(mechanism with fixed positions) 10 A - 250 VA
743 92
Pack Cat.Nos Ancillary mechanisms
Blanking plates 10 743 91 1-module blank plate
10 743 92 2-module blank plate
1 module Cord outlet 10 743 99 Cord outlet
With Ø8 mm entry
2 modules Cable outlets 10 743 98 Standard - cable outlet
10 743 94 20 A cable outlet With 3 terminals to facilitate connection to appliances
743 94
Only available
until 2010 Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
572
cex-EP3
MosaicTM
shaver socketsMosaicTM
access control and call indicators
744 45 744 47 744 86 744 86 with Mosaic plate Cat.No 750 58
Pack Cat.Nos Access control
2 modules Key fob switch 1 744 45 For energizing a circuit by inserting a key fob
Cat.No 898 06 or a smart card (e.g. access card for a hotel room) Example of use: hotel room power supply only when
guest is present Power requirement: 230 V± - 50/60 Hz Time-delay of approx. 30 sec. after card removal Used in conjunction with a contactor or with Mosaic
single grey pole relay Cat.No 744 42 (p. 570)
Key fob 10 898 06 Supplied complete with a label
holder for individual hotel identification
Hotel bedroom call indicators
Enables the resident to inform hotel staff of the room status
Two settings are possible:
1 + 1 module Indicator lamp and bell push 5 744 47 Installed in the corridor,
displays calls Supplied with lamps Cat.Nos 899 16/17
Internal control unit 5 744 48 Allows the user to select
the desired setting Supplied with lamps Cat.Nos 899 06/07
Pack Cat.Nos Shaver sockets IP 24 - IK 04
Conform to EN 60742 and EN 61558-2 Power supply 230 VA - 50/60 Hz and 1 output
120/220 VA Connection via automatic terminals Equipped with a circuit separation transformer to isolate the user from the mains supply Protected against overloads and short circuits by built-in thermal relay limiting the available power to 20 VA Insertion of the plug activates the power supply to the transformer
230 V / 120-230 V - 50-60 Hz 1 744 86 With integrated support For cover plate (see p. 581) For flush mounting boxes, use 2 gang box,
50 mm deep and for surface mounting box, use Cat.No 893 23 (below) Takes the following pins
Conform to BS EN 60742 and BS EN 61558-2-5 1 6745 86 120 V / 120 - 230 V 1 6745 87 230 V / 120 - 230 V with earth connector
Boxes 5 893 23 Surface-box depth 50 mm
10 891 12 Flush-box 136 x 70 x 44 mm
230 V115 V
230 V
115V
230 V
893 23
Conform to
EN 61558-2-5
Only available
until 2010Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
573
cex-EP3
MosaicTM
RCBO and MCBsMosaicTM
voltage surge protectors
744 65 744 66
744 67
744 59 744 53
Pack Cat.Nos Voltage surge protectors
Localised protection for mains supply of computer and electronic equipment Can be connected to a socket
2 modules Voltage surge protector 1 744 65 16 A - 250 VA - 50/60 Hz Same specifications as
Cat.No 744 66 but without filter function
Display of operation by indicator Nominal discharge current: 1.5 kA Maximum current accepted: 3 kA Protection level: 1.2 kV Earth conduction threshold: 1 mA
2 modules Voltage surge protector + filter 1 744 66 6 A - 250 VA - 50/60 Hz
Supplied with 5 x 20 - 6.3 A fuse Cat.No 102 63
Display of operation by voltage surge protector indicator Nominal discharge current: 1.5 kA Maximum current accepted: 3 kA Protection level: 1.2 kV
Attenuation of the filter measured according to CISPR 14 and 17
Frequency 0.1 0.5 1 5 10
in MHz
Attenuation in dB
10 25 30 45 45
Replacement module 1 744 67 For Cat.Nos 744 65/66 above
Replaces the module after it has been used
Thermal-magnetic proximity MCBs
Used for local protection of part of a circuit (e.g. 2P + T socket) against overloads and short-circuits Used in tradition to the main protection as it is both close to the user and discriminating vis-a-vis the main protection, and can therefore be reset immediately The Mosaic proximity MCB can also be used as a local consumption limiter (depending on its rating) Breaking capacity: 3000 A (10 A - 16 A)
2 modules Single pole + neutral 230 VA 1 744 52 10 A 1 744 53 16 A
Pack Cat.Nos RCBO
Single pole + neutral 230 VA The RCBO is used to protect people
(premises with a conductive floor, presence of water, etc.) against direct contact with live parts or leakages to earth
2 modules With test button 1 744 59 30 mA (R.C.D. nominal current)
16 A
010.020.030.040.050.060.0
100 KHz 1 MHz 10 MHz
Only available
until 2010 Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
574
cex-EP3
MosaicTM
British standard socket outlets
741 40 741 48741 39 741 41
Pack Cat.Nos Socket outlets 2 P + T (continued)
13 A - 250 VA - Double pole switched Conform to BS 1363: part 2 10 741 45 DP 1 gang
10 741 46 DP 1 gang + neon
5 741 47 DP 2 gang twin earth
5 741 48 DP 2 gang twin earth + neon
5 A - Double pole switched 10 741 25 DP 1 gang
Socket outlets 2P + T Shuttered for child safety Use special cover plates (p. 581)
15 A - 250 VA - Single pole switched Conform to BS 546 10 741 22 1 gang
10 741 23 1 gang + neon
13 A - 250 VA - Single pole switched Conform to BS 1363 10 741 41 1 gang
10 741 42 1 gang + neon
Pack Cat.Nos Socket outlets 2P + T modular units
Shuttered for child safety ASTA licence Use 2 or 3 modules cover plates, and support frames
13 A 2 modules Conform to BS 1363: part 2 10 741 40 2P + T
3 modules
5 741 39 2P + T - switched
5 741 38 2P + T - switched - dedicated non standard
15 A 3 modules Conform to BS 546 5 741 20 2P + T - switched
Fused connection units 13 A - 250 V± Conform to BS 1363: Part 4 Cover plates (see p. 581) Double pole - fused 13 A (fuse supplied)
Flex outlet knockout and cord grip Captive fuse carrier (padlockable) Captive terminal screws Dimensions: 86 x 86 mm
10 743 60 Unswitched
10 743 61 Switched without indicator
10 743 63 Switched + neon
Support frames and cover plates (p. 581-582)
Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
575
cex-EP3
MosaicTM
German standard socket outletsMosaicTM
South Africa, US and Euro US standards socket outlets
741 79 741 02 741 00741 80
Pack Cat.Nos South African type socket outlets
3 modules 16 A - Conform to SABS 5 741 20 2P + T switched
5 741 21 2P + T - switched dedicated
American type socket outlets
1 module 15 A - 127 V 10 741 78 2P
2 modules 10 741 80 2P + T
3 modules 5 741 79 2 x 2P + T
Euro US type socket outlets
1 module 15 A - 127 V - 16 A - 250 V 10 741 61 2P with shutters
2 modules
10 741 02 2P +
3 modules 5 741 00 2 x 2P +
741 30 741 32 741 35
Pack Cat.Nos German standard socket outlets
2 modules 16 A 10 741 10 2P with shutters
10 741 30 2P + - shuttered for child safety
10 741 31 2P +
10 741 32 2P + - tamperproof
10 741 33 2P + with cover
10 741 35 2P + - dedicated green
10 741 36 2P + - dedicated orange
10 502 99 Tamperproof insert for socket Fits directly into the plug
Support frames and cover plates (p. 583) Support frames and cover plates (p. 583)
Only available
until 2010 Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
576
cex-EP3
MosaicTM
French standard socket outletsMosaicTM
International standards socket outlets
741 05 741 52 741 74
Pack Cat.Nos International standards
1 module Modular units socket outlets 10 743 03 2P - 3 A - ELV - 12 mm fixing
centres for Cat.No 500 05 plug
20 500 05 Plug for socket outlet Cat.No 743 03 2P - 3 A - ELV 12 mm fixing centres pins Ø3.6 mm
1 module Italy 10 741 03 2P + - 10 A on line
10 741 05 10 A 2P + - shuttered for child safety
10 741 06 10/16 A 2P + - shuttered for child safety
Switzerland 1 module 2P + - 10 A - shuttered for child safety 10 741 08 Type 12
2 modules 10 741 69 Type 13
2 modules Australia 10 741 66 2P + - 10 A auto-switched
2 modules China 10 741 52 2P + - 10 A - shuttered
for child safety
2 modules Israel 10 741 74 2P + - shuttered
for child safety
2 modules Argentina 10 741 70 2P + - 10 A
741 14741 11
Pack Cat.Nos French standard socket outlets
10/16 A - 250 V
2 modules With shutters for child protection 10 741 10 2P
10 741 11 2P +
Tamperproof socket outlets Used to identify a mains circuit
(e.g.: inverter) and avoid connection of unnecessary equipment which may
2 modules cause interference on the circuit 10 741 14 2P +
10 502 99 Tamperproof insert for socket Fits directly into the plug
Only available
until 2010Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
577
cex-EP3
MosaicTM
data sockets - 110 connectMosaicTM
data sockets Cat. 5e, Cat. 6 and 10GIGA - tool less
742 85
742 84742 80
742 44
Certified as conforming to standards ISO 11801 - ed.2.0, EN 50173-1 and EIA/TIA 568Tool less fast connection socketsContacts marked with dual colour code 568 A and B and numbersConnectors with insulation displacement contactsCan be rewired in the event of an errorMultidirectional cable entry enables installation in shallow trunking, 34 mm for UTP and FTP connectors, 50 mm for STPTake RJ 45, RJ 12 or RJ 11 plugs with no distortion of the contacts
742 13
332 60742 96
6339 816339 80
Pack Cat.Nos RJ 45 - tool less system
10 GIGA STP - metal shielding
The shielding is easy to fit, once the socket is connected 9 contacts, metal shielding, 1 RJ 45
10 742 44 1 module Number of 10 742 45 2 modules modules
Cat. 5e Cat. 6 Cat. 6 and cat. 5e UTP 22.5 x 45 mm
10 742 85 742 80 8 contacts 1 10 742 86 742 81 8 contacts 2
Cat. 6 and cat. 5e FTP 10 742 88 742 90 9 contacts 1 10 742 89 742 91 9 contacts 2 10 742 92 9 contacts - installation at 90° 2
possible on columns and mini-columns
Cat. 6 and cat. 5e STP - metal shielding
The shielding is easy to fit once the socket is connected
10 742 83 742 93 1 shielded 1 10 742 84 742 94 1 shielded 2 10 742 87 1 Zamak shielded 2 10 742 95 2 RJ - 2 Zamak modules 2 Impact tool 110 connect
For connecting sockets and patch panels fitted with self-stripping terminals, type 110 ensures the right amount of pressure exerted for size of wire cut
1 332 60 Cabling tool 110 supplied with blade
Pack Cat.Nos RJ 45 - 110 connect
Transmission of voice, data and image Enables RJ 45 Cat. 5e and Cat. 6 installation conforming to ISO 11801 - 2d Fast tool connection insulation for displacement terminals IDC lateral connection Double colour code EIA 568 A and B Transparent label holder
UTP (without screen) Number of
modules Cat. 5e Cat. 6 17.5 mm 10 742 13 6339 80 8 contacts 1
10 742 14 6339 81 8 contacts 2
Cat. 5e FTP (with screen) 10 742 63 9 contacts 1
10 742 64 9 contacts 2
STP shielded EMC shielding cover 10 742 96 9 contacts 1
10 742 97 9 contacts 2
Only available
until 2010Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
578
cex-EP3
MosaicTM
data and telephone sockets
Miscellaneous
2 modules 10 742 35 Blanking plate with label holder Allows installations of special data sockets
ACO® sockets
ACO®: AMPcompatible licence For prewiring an area for computers or telephones
without having to worry about the equipment to be connected
2 modules High speed installation possible (> Cat. 5e)
5 742 40 Shielded ACO® I socket Supplied with connector block
for 4 pair cable
2 modules
With transparent label holder
5 742 41 Shielded ACO® II socket Supplied with Cat. 6 connector block
Takes 8 mm PIMF cable
742 40 743 44743 28
RJ 45 sockets (ISDN/Internet)
2 modules 1/4 turn IDC connection (possible looping) 10 743 44 8 contacts with 2 mm2 earth terminal
Pack Cat.Nos Telephone sockets
1 module
Conform to British Telecom With IDC connection
10 6745 18 Single master 10 6745 19 Single secondary
1 module Line Jack module 10 743 28 Single secondary
2 modules
Screw terminals
10 743 38 8 contacts Approved by France Telecom
RJ 11 and RJ 12 sockets
1/4 turn IDC connection (possible looping)
1 module RJ 11 10 742 61 4 contacts
2 modules
with shutters and label holder
10 743 41 4 contacts
2 modules RJ 12 10 743 42 6 contacts
10 743 32 6 contacts with shutters and label holder
733 10
Pack Cat.Nos Other data sockets
2 modules USB female 1 733 10 Allows the connection of USB devices (such as printers, scanners, external disc drive) Cable length: max. 5 m, 1 mm2 connector
2 modules IEEE 1394 female 1 733 11 Fire Wire or i.link type data socket Especially adapted to high volume data transfer (digital video or images) Cable length: max. 5 m, 1 mm2 connector
Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
579
cex-EP3
MosaicTM
audio, video and TV sockets
743 82743 76743 77
TV sockets (Ø9/9.5 female)
1 module TV 0 - 862 MHz - non isolated 20 743 70 Single 20 743 72 Throughwiring 20 743 73 Terminal
Pack Cat.Nos TV - FM sockets
Suitable to reception of hertzian and satellite networks signals Ø9.5 mm connector TV male/FM female For cable network, hertzian distribution or amplitude modulation (collective satellite reception without
2 modules individual demodulator) 10 743 77 TV: 5-68/120 - 862 MHz FM: 87.5 to 108 MHz Isolated (EN 50-083-2)
10 743 81 TV - FM throughwiring Att pass < 2 dB Reflex < 14 dB Daisy chain up to 4 sockets max.
5 743 80 TV - FM terminal TV: 5 to 862 MHz FM: 5 to 862 MHz
Att pass < 2 dB Reflex < 10 dB Supplied with terminating resistor
TV - FM - SAT sockets
Equipped with automatic connection terminal which clamps coaxial cable Enables the reception of digital transmissions Compatible with reception of hertzian and satellite networks signals Ø9.5 mm connector TV male/FM female "F" Sat connector - Att. < 2 dB TV: 5 - 68/120 - 862 MHz FM: 87.5 - 108 MHz SAT: 950 - 2 400 MHz
2 modules
For hertzian end satellite with individual demodulator
10 743 76 TV - FM - SAT 10 743 75 TV - FM - SAT - 2 cables Enables the satellite connection to be added to an existing installation without coupling by
dropping a second cable into the socket
For collective distribution For headend equipment using frequency
transposition in collective distribution Daisy chain up to 4 sockets
10 743 68 TV - FM - SAT socket throughwiring Return channel att < 1.5 dB reflex < 14 dB no DC 10 743 69 TV - FM - SAT socket terminal
733 02
Pack Cat.Nos Audio sockets
For equipping meeting/conference rooms, or individual offices Connection is made on screw terminals
1 module Loudspeakers 10 733 01 Loudspeaker socket
2 modules
1 module - Terminal 4 mm2
10 733 02 Loudspeaker socket 2 modules - Terminal 4 mm2
2 modules Dual connector female (RCA) 1 733 03 Used for transmitting stereo audio signals Equipped with 2 connectors, red and white Wiring < 15 m, terminal 1 mm2
2 modules Female 3.5 mm jack 1 733 04 Used for transmitting stereo signal from a portable source (Ipod, laptop, etc.) to amplified enclosures Wiring < 15 m, terminal 1 mm2
2 modules Neutrik® female 3-pole XLR 1 733 05 Used for connecting a microphone or a remote console to an amplifier Can be used for connecting enclosures Wiring < 25 m, terminal 2.5 mm2
2 modules 4-pole Speakon-4 1 733 12 Used for connecting passive enclosures to
an amplifier Wiring < 50 m, terminal 2.5 mm2
733 06 733 07
Video sockets
For equipping meeting/conference rooms, or individual offices Connection is made on screw terminals
2 modules Female HD15 1 733 06 Used for transmitting VGA, XGA or VESA analogue video signals Can be used for connecting videoprojectors Wiring < 15 m, terminal 1 mm2
For installation in box, trunking, etc. depth 40 mm min.
2 modules Triple connector female audio/video 1 733 07 Used for transmitting stereo audio and
video signals (home cinema) Equipped with 3 connectors, red, white and yellow
Wiring < 15 m, terminal 1 mm2
2 modules S-Video (4-pin mini-Din) 1 733 08 Used for transmitting high definition YC/SVHS video signals (Hi-8 camcorder, DVD drive, etc.) Wiring < 15 m, terminal 1 mm2
2 modules Female BNC 75 Ω 1 733 09 Used for connecting composite video signals (video surveillance network, camera, plasma screen, etc.) Wiring < 50 m on Kx6, terminal 1 mm2
TV single sockets
2 modules TV 0 - 2400 MHz (male Ø9.5) 10 743 82 Single shielded
10 743 58 Single shielded "F" type with screw
10 743 83 Throughwiring shielded 14 dB attenuation 10 743 84 Terminal shielded 10 dB attenuation
Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
580
cex-EP3
MosaicTM
bell indicatorsMosaicTM
visual indication
747 01 747 30 with 747 32747 25
(1) Use lamps Cat.Nos 899 11/12/16(2) Use lamps Cat.Nos 899 11/12/17
Pack Cat.Nos Miniature emergency light unit
2 modules 1 747 25 Illuminates automatically upon power failure Unclips from frame to become portable Can be permanently attached to frame LEDs indicating mains and charging status
Other illuminated functions
1 module Indicator units 10 747 00(1) Single transparent 10 747 01(1) Single red 10 747 02(1) Single orange 10 747 03(2) Single green 10 747 05 Double, supplied with set of lenses colours (transparent, red, orange, green)
2 modules Low output downlighter 1 747 22 230 V with LED
2 modules Overdoor light unit 10 747 30 Lampholder and base unit
Supplied without diffuser Requires E 10 Legrand lamps (max. 5 W)
Diffusers for above 10 747 31 Transparent 10 747 32 Red 10 747 33 Orange 10 747 34 Green
Lamps
For switches, indicators light unit and other low output light fittings
For switches: indicator and locator usage Supplied with rapid connection device for
neutral wire 10 899 01 12 V - 0.4 W 10 899 02 24 V - 0.8 W
For indicator usage 230 V (1.7 mA) 10 899 06 Bright orange neon
Supplied with rapid connection device for neutral wire
10 899 07 230 V (0.55 mA) (Low consumption green fluorescent lamp) For time-lag switch, push-buttons etc…
Lamps for indicators units 10 899 11 12 V - 0.4 W for orange, red, transparent,
green indicator 10 899 12 24 V - 0.8 W for orange, red, transparent, green
indicator 10 899 16 230 V (1.7 mA) for orange, red,
transparent indicator units 10 899 17 230 V (1.7 mA) for green indicator units
E 10 lamps for overdoor / night light units 10 898 03 230 V - 3 W
110 V lamps on request
Pack Cat.Nos Call units
Suitable for hotels, educational establishments, retirement homes, etc. 1 to 6 calls can be centralised using indicator lamps Calls controlled by pushbuttons 2 wires per direction Calls registered by numbered indicator lamps and a brief audible signal Several calls can be registered simultaneously Possible to clear directions individually Supplied with numbers It is possible to use a 24 V uninterruptible power supply 6-direction modules Can be used to create bell indicators as required
6 modules Can be mounted on table-top 1 780 36 With built-in power supply
127/230 V - 50/60 Hz 1 780 37 For external 12 V SELV
power supply (not supplied)
Complete bell indicators
Consisting of 1 or 2 call units mounted on a Mosaic 6 or 2 x 6 support frames Supplied with white plate Can be surface-mounted using frames, Cat.No 893 25 (6 directions) or Cat.No 893 27 (12 directions) Can be flush-mounted in 2 x 6 modules box
With built-in power supply 127/230 V - 50/60 Hz
1 780 26 6 directions 1 780 32 12 directions
For external 12 V SELV power supply (not supplied)
1 780 27 6 directions 1 780 33 12 directions
6-direction transfer unit
1 780 57 For remote call transfer
780 36
780 32
Only available
until 2010Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
581
cex-EP3
MosaicTM
British standard cover platesMosaicTM
British standard support frames
748 26 748 28
6745 56
6745 60
750 29
750 60
Clip-on via notches onto screw or claw mounting supports Cannot be removed by handEasy to remove with a screwdriverWhite RAL 9010 identical to mini-trunking, and DLP trunking systems
Support frames with white cover plates supplied
5 6745 56 For 6-module frame 5 6745 58 For 8-module frame 2 6745 59 For 12-module frame 2 6745 60 For 18-module frame
Flush mounting boxes
Back box 35 mm deep 1 6890 27 For 6/8 modules 1 6890 28 For 12 modules
Pack Cat.Nos Support frames for BS type boxes
Screw mounting Accept mechanisms horizontally or vertically
For 1 gang box - 60.3 mm fixing centres Supplied with screws 10 748 26 Square for 1 and 2 modules 10 1748 26 With earth connector
For 1 gang box - 60.3 mm fixing centres 10 748 27 Rectangular for 3 modules 10 1748 27 With earth connector
10 748 28 Rectangular for 2 x 2 modules 10 1748 28 With earth connector
Pack Cat.Nos Cover plates 60.3 mm and 120.6 mm fixing centres
White RAL 9010 Dimensions
(mm) 10 750 26 For 1 module (square) 86 x 86
10 750 27 For 2 modules (square) 86 x 86
10 750 29 For 3 modules 86 x 146
10 750 28 For 2 x 2 modules 86 x 146
10 750 55 For 5 A and13 A switched 86 x 86 socket outlet 1 gang box
10 750 57 For 15 A switched socket 86 x 86 outlet 1 gang box
10 750 56 For 13 A twin switched 86 x 146 socket outlet 2 gang box
10 750 58 For 45 A double pole switch 146 x 86 2 gang box and shaver socket
10 750 60 For 13 A fused connection 86 x 86 unit 1 gang box
Only available
until 2010 Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
582
cex-EP3
MosaicTM
MetalBritish standard cover plates
755 78 755 93
755 27 754 28 754 41
Clip-on via notches onto screw or claw mounting supportsCannot be removed by handEasy to remove with a screwdriver
754 77 754 93
Pack Cat.Nos Cover plates 60.3 mm and 120.6 mm fixing centres
Polished Matt Dimensions gold gold (mm) 1 754 26 755 26 For 1 module 88 x 88
1 754 27 755 27 For 2 modules 88 x 88
1 754 28 755 28 For 2 x 2 modules 88 x 148
1 754 29 755 29 For 3 modules 88 x 148
1 754 41 755 41 For 5 A and 13 A switched 88 x 88 socket outlet 1 gang box
1 754 22 For 15 A switched 88 x 88 socket outlet 1 gang box
1 754 43 755 43 For 13 A twin 88 x 148 switched socket outlet 2 gang box
1 754 48 755 48 For 45 A double pole 148 x 88 switch 2 gang box and shaver socket
Pack Cat.Nos Cover plates 60.3 mm and 120.6 mm fixing centres
Polished Matt Dimensions Steel silver (mm) 1 754 76 755 76 For 1 module (square) 88 x 88
1 754 77 755 77 For 2 modules (square) 88 x 88
1 754 78 755 78 For 2 x 2 modules 88 x 148
1 754 79 755 79 For 3 modules 88 x 148
1 754 91 755 91 For 5 A and 13 A 88 x 88 switched socket outlet 1 gang box
1 755 72 For 15 A switched 88 x 88 socket outlet 1 gang box
1 754 93 755 93 For 13 A switched 88 x 148 socket outlet 2 gang box
1 754 98 755 98 For 45 A double pole 148 x 88 switch 2 gang box and shaver socket
Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
583
cex-EP3
MosaicTM
German standard support frames and cover platesMosaicTM
American and Italian standard support frames and cover plates
748 11 750 13 (equipped)
Pack Cat.Nos American standard support frames 83.5 mm fixing centres
For installation in American type boxes 2" x 4" or 4" x 4"
10 748 11 For 1 and 2 modules in 2" x 4" boxes
10 748 03 For 3 modules in 2" x 4" boxes
Cover plates 83.5 mm fixing centres
Clip-on via notches onto screw or claw mounting supports Cannot be removed by hand
Easy to remove with a screwdriver White RAL 9010 identical to DLP mini-trunking,
skirting-trunking and adaptable trunking
White Dimensions RAL 9010 (mm) 10 750 11 For 1 module 80 x 123
10 750 12 For 2 modules 80 x 123
10 750 13 For 3 modules 80 x 123 Vertical mounting
Italian standard support frames
Screw mounting 10 748 03 For 1 to 3 modules
10 748 04 For 4 modules
10 748 06 For 6 modules
White
Cover plates Dimensions
RAL 9010
(mm)
10 750 05 For 1 module 123 x 80
10 750 06 For 2 modules 123 x 80
10 750 07 For 3 modules 123 x 80
10 750 10 For 4 modules 148 x 80
10 750 14 For 6 modules 205 x 80
750 38 (equipped)748 32 750 32
Pack Cat.Nos Support frames for German type boxes 60 mm fixing centres
Can be coupled for joining units together (2 x 2 modules, 3 x 2 modules)
Screw mounting 20 748 32 Square for 1 and 2 modules
Claw mounting 10 748 42 Square for 1 and 2 modules
White
Cover plates 60 mm fixing centres Dimensions
RAL 9010
(mm)
10 750 31 For 1 module 80 x 80
10 750 32 For 2 modules 80 x 80
10 750 35 For 2 x 2 modules 80 x 152 Horizontal mounting
only
10 750 36 For 3 x 2 modules 80 x 223 Horizontal mounting
only
10 750 38 For 2 x 2 modules 80 x 162 Vertical mounting
only
10 750 39 For 3 x 2 modules 80 x 233 Vertical mounting
750 07
Only available
until 2010 Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
584
cex-EP3
MosaicTM
French standard support frames and cover plates
White
Panel mounting supports
RAL 9010
For 1 to 3 mm thick panels
10 748 50 For 1 module Clips into a 28 x 53.5 mm aperture
10 748 52 For 2 modules Clips into a 58.5 x 53.5 mm aperture
Pack Cat.Nos Support frames
Screw mounting 10 748 01 For 1 module
20 748 02 For 2 modules Can be coupled for joining units together (2 x 2 modules, 3 x 2 modules)
New coupling principle enabling work to be performed on one unit without removing the others, when several units used With adjustable feet (e.g.: for mounting on tiling) 10 748 03 For horizontal
mounting of 3 modules
10 748 04 For horizontal mounting of 4 modules
10 748 06 For horizontal mounting of 6 modules
5 748 25 For horizontal mounting of 2 x 6 modules
Claw mounting 10 748 12 For 2 modules
For Ø60 mm boxes Fixing possible in screw mounting boxes
748 02 750 01 (equipped)
750 02 (equipped) 750 10 (equipped)
Pack Cat.Nos Cover plates 60 mm fixing centres
Clip-on via notches onto screw or claw mounting supports Cannot be removed by hand Easy to remove with a screwdriver
White White RAL 9010 identical to mini-trunking, Dimensions RAL 9010 and DLP trunking system (mm)
10 750 01 For 1 module 40 x 80
20 750 02 For 2 modules (square) 80 x 80
10 750 22 For 2 x 2 modules 80 x 148 Vertical mounting
10 750 23 For 3 x 2 modules 80 x 205 Vertical mounting
10 750 07 For 3 modules 123 x 80
10 750 10 For 4 modules 148 x 80 Horizontal mounting only
10 750 14 For 6 modules 205 x 80 Horizontal mounting only
5 750 42 For 2 x 6 modules 213 x 213 Horizontal mounting only Clipped on using slats for reduced thickness With label holder
Supports for mounting on Din rail (p. 585)
Only available
until 2010
New Mosaic range (p. 790, 791)
www.klinkmann.com
585
cex-EP3
MosaicTM adaptorsMosaicTM
surface mounting boxesfor screw mounting equipment
893 20 893 24 893 27
748 62
695 80 6806 33
748 61
Pack Cat.Nos Surface mounting boxes for Mosaic units
French standard
For 2 modules Box for screw mounting support Dimensions
White frame Cat.Nos 748 02/32 (mm)
5 893 14 Depth 30 mm 80 x 80 5 893 20 Depth 40 mm 80 x 80
For 2 x 2 modules For 4 horizontal modules 5 893 24 Box for 2 Cat.No 748 02 coupled 80 x 148 together or one Cat.No 748 04 Depth 40 mm
For 3 x 2 modules For 6 horizontal modules
5 893 25 Box for 3 Cat.No 748 02 coupled 80 x 205 together or one Cat.No 748 06 Depth 40 mm
For 2 x 6 modules 2 893 27 Box for Cat.No 748 25 - Depth 50 mm 214 x 214 5 893 23 Box for Cat.No 744 86 88 x 148
Surface mounting boxes Conform to BS 5733
Moulded material boxes for the surface mounting of standard flush accessories Back, side and internal knockouts
Dimensions White Depth 46 mm (mm)
10 6745 46 1 gang 86 x 86 1 6745 47 2 gang 86 x 146
Pack Cat.Nos Modular support frames Plexo 55 IP 55 - IK 07
For 2-module Mosaic mechanisms Can be equipped with any Mosaic function in order
to obtain an IP55 wiring device 10 695 80 Adaptor with smoked polycarbonate flap
1 695 79 Adaptor with smoked polycarbonate flap lockable with special tool below (not supplied)
1 919 45 Security tool
For 3-module Mosaic mechanisms Weatherproof IP 55 plate frame with membrane
Allows operations of switches without opening cover maintaining IP 55 rating
20 6806 32 White 20 6806 33 Grey
Adaptors for mounting on Mosaic 50 mm supports
For replacing Mosaic mechanisms (50 x 50 mm) without having to change the plate or the support frame
Enable a Mosaic mechanism to be mounted on Mosaic (50 x 50 mm) screw mounting support frames
10 748 61 Adaptor for 1 module mechanism (width 22.5 x 45 mm)
10 748 62 Adaptor for 2 module mechanism (width 45 x 45 mm)
Back boxes (p. 746)
Only available
until 2010 Only available
until 2010
New Mosaic range (p. 790, 791)