Date post: | 11-May-2017 |
Category: |
Documents |
Upload: | dragoslav-dzolic |
View: | 221 times |
Download: | 1 times |
Metal fiber filtersfor gas filtration
Description:
With the increasing demand for higher performance in extreme conditions,
traditional separation systems such as cyclones, ElectroStatic Precipitators
(ESP) and disposable filters are losing their appeal.
Cleanable sintered metal fiber filters
offer an economical solution. The
development of metal fiber filter
media such as Bekipor® contributed
to an increased quality level through
a higher filter efficiency and a longer
on-stream life.
A highly porous structure, which is a
characteristic of a sintered metal fiber
media, offers high permeability and,
low pressure drop, even at high filtration velocities. This results in a low
capital expenditure and low running costs.
The cleanability for both on-line cleaned surface filtration as for off-line
cleaned depth filtration is excellent.
The superiority of Bekipor® is enhanced through the excellent
thermal-mechanical characteristics in comparison with ceramics.
Standard alloy for these fiber filters is 316LSS. For high-temperature or
corrosive applications, other alloys are available. Inconel® 601 and Fecralloy®
are used for high temperatures (up to 560°C/1040°F and 1000°C/1800°F
respectively), whereas Alloy HR can withstand temperatures up to
600°C/1100°F and wet, corrosive environments.
BEKIFLOW HG
Bekiflow® is a registered trademark of N.V. Bekaert S.A.Inconel® is a registered trademark of Special Metals Corporation.Fecralloy® is a registered trademark of UKEA, UK
1136 PSFIBERGAS 9/4/03 8:45 AM Page 1
FILTRATION CHARACTERISTICS
• High porosity = Low pressure drop• Solid construction enabling high-filtration
velocities and long on-stream life • Heat and corrosion resistant• Customized dimensions upon design
or request
General features and benefits
PSFIBERGAS Rev 0 0803 1.5M
For more information:Mott Corporation84 Spring LaneFarmington, CT 06032-3159
Tel: 860-747-6333 or 800-289-6688Fax: 860-747-6739E-mail: [email protected]
www.mottcorp.com ISO 9001 CERTIFIED
mott corporationTh ink o f the poss ib i l i t i e s ™
Available alloys316L Inconel® 601 Alloy HR Fecralloy®
Tmax Tmax Tmax Tmax 360°C/650°F 560°C/1040°F 600°C/1100°F 1000°C/1800°F
Standard High Wet corrosion Very highapplications temperature resistant alloy temperature
alloy alloy
DustLoadedGas
CleanGas
Cake build-up
Filtration Cycle
Back pulse
Cleaning Cycle
DustCake
PressurizedCleaningGas
SURFACE FILTRATION: ON-LINE CLEANED THROUGH BACK PULSE
DEPTH FILTRATION: OFF-LINE CLEANED
Specific features and benefits• No clogging• No Delta P fluctuations• Long on-stream life• Straight forward technology
Bekipor(- ST metal fiber media
ApplicationsApplicable for low dust loads in the (petro) chemicalindustry and in catalyst production plants to:• Protect downstream equipment• Purify process gases
Specific features and benefits• High dirt holding capacity = long on-stream life • High porosity & pleatable = compact construction
ApplicationsApplicable for high dust loads in the (petro) chemicalindustry and in catalyst production plants to:• Recover catalyst• Clean process gases• Clean off gases
1136 PSFIBERGAS 9/4/03 8:45 AM Page 2