MRT 2150

• Lift height : 20.60 m• Max. reach : 18.10 m• Engine : 132 HP - 97 kw• 4 wheel drive - 4 wheel steer• Hydrostatic transmission• Levelling system

ROTATION ON STABILISERS FULLY EXTENDED WITH FORKS

FRONTAL POSITION ON WHEELSWITH FORKS

ROTATION ON STABILISERS NOT FULLY EXTENDEDWITH FORKS

ROTATION ON STABILISERS FULLY EXTENDEDWITH 5T WINCH

ROTATION ON STABILISERS FULLY EXTENDEDWITH JIB P 600

ROTATION ON STABILISERS FULLY EXTENDEDWITH JIB P 1500

MRT

215

0 M

Ser

ies

ROTATION ON STABILISERS FULLY EXTENDEDWITH CRANE JIB

ROTATION ON STABILISERS FULLY EXTENDEDWITH AERIAL JIB PLATFORM

ROTATION ON STABILISERS FULLY EXTENDEDWITH EXTENSIBLE PLATFORM 2,25/4 m

ROTATION ON STABILISERS FULLY EXTENDEDWITH 1000 KG PLATFORM 2,25/4 m

ROTATION ON STABILISERS FULLY EXTENDEDWITH 3 D SYSTEM IN POSITIVE POSITION

ROTATION ON STABILISERS FULLY EXTENDEDWITH 3 D SYSTEM IN NEGATIVE POSITION

365 kg3 peoples

1000 kg3 peoples

200 kg2 peoples

300 kg3 peoples

200 kg2 peoples

207/04/2003

MRT 2150

Lift capacity (on stabilisers) ...........................4999 kgat 500 mm from forks heels

Lift height : ...................................................20.60 m

Tyres18 - 22,5

Forks (mm)Length ...............................................................1200Width x thickness .........................................150 X 50

Multidisc brakes : hydraulically assisted on both axlesNegative parking brake

Engine PERKINSType .....................................................1104C - 44 TACapacity .............................................4 cyl. 4400 cm3Power (ISO/TR 14396)..........................132 HP/97 kw500 Nm at 1400 rpmWater coolingDirect injection

Transmission..............................................hydrostatic With automatic power regulation (hydraulic variable displacement pump and motor)Reversing shift ....................................electromagnetic2 speed forward and reverseTravel speed..................................................25 km/h

Rear axleFrame levelling on front axle +/- 8° (15%)Automatic rear axle locking systemover 15° rotation

4 stabilizerssimultaneous or individually controlled

Total and continuous rotation Turret mounted on a double slew ring Hydraulic and electric rotation

Hydraulics3 pumps gear type ........................270 bars/160 l/mn

Control : 2 electro proportional control joysticks for allhydraulic movements

CapacitiesCooling system....................................................15 l.Engine oil .........................................................11.5 l.Hydraulic oil ......................................................200 l.Fuel tank...........................................................230 l.

Weight unladen (with forks) .........................16095 kgOverall width ...................................................2.43 mOverall height ..................................................3.02 mOverall length ..................................................6.78 mGround clearance ............................................0.37 mDrawbar pull .............................................10800 daN

Standard load moment indicator(mobile crane standards)

This publication in no way constitutes an offer and the company reserves the right to alter specification without prior notice.The MANITOU models presented in this brochure can be supplied complete with optional equipment attachments.

MANITOU B.F. S.A.B.P.249 - 44158 ANCENIS CEDEX - FRANCETEL : 33 2 40 09 10 11EXPORT DEPARTMENT FAX : 33 2 40 09 10 97www.manitou.com

A 1200A1 150A2 1030A3 60B 290C 6490D 5050E 1155F 2750G 1155H 370I 2420J 3025K 2485L 1930M 2425N 4700O 5100P 200Q 4500R 3800S 4550V 950Y 12°Z 105°

mm