+ All Categories
Home > Documents > MS-CAMC-2019: "Materials Science: Composites, Alloys and …mscamc.spbstu.ru/files/program.pdf ·...

MS-CAMC-2019: "Materials Science: Composites, Alloys and …mscamc.spbstu.ru/files/program.pdf ·...

Date post: 01-Feb-2021
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
7
Transcript
  • Tigran Uglunts,

    A. Kovchik

  • Arturs ProskurovskisThe bearing capacity of expanded clay

    concrete block of permanent shuttering

    without reinforced concrete filling

    12-15 - 12-30

    Nikolay Samotaev Al2O3 Nanostructured Gas SensitiveMaterial for Silicon Based Low Power

    Thermocatalytic Sensor

    12-30 - 12-50

    Olga Panina, A. Nemov,

    I. Kobychno, O. V.

    Tolochko and V. Yadykin

    Numerical analysis of mechanical behavior

    of unidirectional thermoplastic-based

    carbon fiber composite for 3D-printing12-50 - 13-05

    Polina Bespalova,

    Alexandr Vorobyev,

    Tatyana Kunkel,

    Alexandr Shakhmin

    Characterization of iron oxide

    coatings prepared by MOCVD

    method from Fe(CO)513-05 - 13-20


Recommended