www.ms-tech.commst@ms-tech.com

1911 Sampson AvenueCorona, CA 92879 USA

(562) 404-9727 | (800) 349-6224

MS-TECH CNC CONTROLS

THE BEST CNC CONTROL AND RETROFIT SOLUTION

Operator Panel Unit

The Operator Panel Unit (OPU) consists of a built-in 15” LCD color display, an MDI input device, Emergency-Stop, Cycle-Start, Feed-Hold pushbuttons, manual pulse generator, etc. The metal case and bottom mouse tray as shown on the picture also included. This makes it possible for a retrofit to be done in a few days (while others may take weeks). The whole operator panel unit can be mounted as a pendant station for milling type machines or held by a post for CNC lathes. MS-Tech’s CNC panel is suitable for any types of CNC machine, and it has been installed on machining and turning cen-ters, 5-axis machines, flame-cutter, injection machines, and many more. There is no need for manufacturers or retrofitters to install additional pushbuttons.

Motion Controller Unit

The motion controller unit (MCU) is a highly-reliable industrial com-puter built with dedicated motion control channels. There are no moving parts inside the controller; it is installed with solid-state hard disk and self-cooling. The power to the controller is 24V DC 2A.

Signal Connection Unit

The signal connection unit (SCU) is for connecting to/from servo drives, spindle drive, relays, magnetic contactors. It also has 14 gen-eral purpose isolated input channels and 14 general purpose out-put channels. The unit is fully shielded by its metal shell. For most of machines, there is no need for manufacturers or retrofitters to install any additional relays. MS-Tech CNC package comes with all you need for most of the machines.

MS-Tech’s CNC control system was created with one goal in mind: to build a professional, user-friendly CNC system compatible with any CNC machine. We are proud to say that our CNC control is now installed in nearly every type of CNC machine worldwide, including 5-axis machines. Each CNC retrofit kit comes with our state-of-the art, industry grade hardware, proprietary software, and in-house technical support.

As a member of the industry, MS-Tech knows how important it is to keep machines in a good operating condition. Our control works to optimize machine performance and minimize downtime, resulting in higher machine productivity. Our optional retrofitting service is designed to be efficent, with most retrofits taking five work days or less on site. Please contact us for more information.

Our CNC Control

MS-Tech Corporation ©1992-2016 | www.ms-tech.com | mst@ms-tech.com | (562) 404-9727

Core Functions and Features

The CNC control comes with the following major functions:

• Automatic mode for running NC program, including: single-step, optional stop, block skip, restart functions, etc.

• Edit mode for CNC program editing, including: find/replace, G-code help, M-code help, go to a line/block, etc.

• MDI (Manual Data Input) mode for entering and executing CNC commands block by block, which may be selected from command history listing

• Manual mode for homing, jogging by hand-wheel or by key, etc.• Setup mode for tool offset and work offset data editing, including: offset measurement, etc.• Service mode for machine diagnosis, including: ladder logic diagnosis, error message

tracking, etc.• Simulation function for verifying CNC programs before running• Standard G-code and M-code programming per convention.• Search program either by block number or by line number• Inch/mm automatic conversion for tool and work offsets

The following features have been designed to enhance the user experience:

• Built-in 3-D tool path display• Built-in conversational programming• Program down/up load from/to USB flash disk or RS-232C com port• Capable of handling long NC programs up to 300,000 blocks long• Super user-friendly -- most people master the operation within 20 minutes• Easy subprogram handling• Built-in ATC macro for handling automatic tool change easily• Default PLC ladders are pre-loaded and changes can be made easily by using the built-in

PLC programming utility• MS-Tech’s CNC Retrofit Package uses a +/- 10V command signal to interface with servo

drives and accept quadrature encoder-type signals for feedback

The following core functions are only a portion of MS-Tech CNC control’s capabilities. MS-Tech’s CNC system allows for Fanuc G-Code compatibility.

Intuitive Software & Interface

MS-Tech CNC is capable of doing complicated machining jobs with ease of operation and programming. Our interface was designed to provide operators with the greatest convenience for day-to-day use. A typical operator can learn how to use MS-Tech’s CNC system within 20 minutes. A full operator manual will be provided with the CNC system.

OVER 25 YEARS OF EXPERIENCE IN THE MACHINE RETROFITTING INDUSTRY

MS-Tech Corporation ©1992-2016 | www.ms-tech.com | mst@ms-tech.com | (562) 404-9727

Past Retrofits

Customer Testimonials

“The machine runs well and we are happy with MS-Tech’s retrofitting solution. Not only is the MS-Tech CNC control is reliable, but also offers very user-friendly operation. We are glad for having selected MS-Tech as the retrofitter for us. We highly recommend MS-Tech Corporation to the machining industry for the people who need the best solution on their outdated CNC machines.”

David Morales, Channell Commercial Corporation

“We began work with MS-Tech in the early 2000’s when they retrofitted our CNC machine with confidence. We are pleased with the MS-Tech CNC retrofit and user friendly control, as well as the expertise and service provided throughout the life of our CNC machines. We have retrofitted over 5 CNC mills as well as a CNC lathe with MS-Tech, which has helped us provide our customers quality products and on-time delivery. We recommend MS-Tech for their quality custom retrofits, as well as their superior expertise in CNC service and support.”

Ardem Jermakian, Western Forge Die

MS-TECH CORPORATION HAS RETROFITTED HUNDREDS OF CNC MACHINES WITH OUR CONRTROL

Request a Quotation Today

Please contact us with any question for a quotation request, or to place an order. Our regular business hours are Mon-Fri, 7AM-4PM PST. You can reach us at:

MS-Tech Corporation1911 Sampson AvenueCorona, CA 92879 USA

www.ms-tech.commst@ms-tech.com

(562) 404-9727 | (800) 349-6224

Cincinnati 20V 5-Axis CR Onsrud 5-Axis CNC Router

More retrofit samples on our website under “Retrofit Gallery”.

Starag NB-128 & Cincinnati 20V 5-Axis

MS-Tech Corporation ©1992-2016 | www.ms-tech.com | mst@ms-tech.com | (562) 404-9727