MSILaboratory Products
CHICAGO FAUCETS CORNING PYREX EMERGENCY EQUIPMENT
EPOXY RESIN LARGEST INVENTORYIN THE SOUTH
EXHAUST BLOWERS
What You Need - When You Need It!Toll Free: 1-800-880-6745
www.msilabproducts.com
Email: [email protected]
FAX281-367-8093
www.msilabproducts.com 1-800-880-6745
HISTORY 1
HISTORYFifty years ago (in 1958) a young Mechanical Engineer wasresponsible for a laboratory installation at Dow Chemical Co.in Freeport, Texas. During the next three years, he becameresponsible for five laboratory installations at Dow.
It soon became clear to this young engineer that plumbingmaterials for laboratories were different from normal commer-cial and industrial plumbing. For example, drain material hadto be acid and solvent resistant. Corning and O.I. Shott filledthat need by providing fitting and pipe made of borosilicateglass made to Federal Standards Number DD-G-541B andASTM-C-1053. Plumbing service fixtures had index buttons,serrated hose ends, vacuum breakers, aspirators, etc. Thesematerials could not be found in the local hardware store orplumbing supply houses. These specialty hard-to-find itemsoften took 90 days to 180 days to deliver. A shorter deliverytime was desperately needed.
This young engineer helped solve an industry-wide deliveryproblem in 1961 by founding a Laboratory Specialty ServiceCompany, which later became Mechanical Specialty Inc., thenMSI and now MSI Products Inc., dba The Laboratory Store.
MSI Products Inc., after 45 years in this highly specializedindustry serves laboratory owners throughout the UnitedStates in colleges, universities, high schools, industrial plants,hospitals, etc. Wherever there is a laboratory, there is a needfor MSI Products Inc., The Laboratory Store. Call us, mostoften we can fill your needs in a few days.
This brief catalog is but a sample of our Houston, Texasinventory. Need replacement parts for older laboratories?Call us, we have a 50-year history of those hard-to-find items.
Jim Cabaniss, Founder
www.msilabproducts.com 1-800-880-6745
2 GENERAL INFORMATION
MSI PRODUCTS, Inc.The Laboratory Store
QUICK DELIVERY ONSPECIAL LABORATORY PRODUCTS!
A Stocking Distributor for:
• CHICAGO FAUCETS for LabsEpoxy coated, silver or tin-lines available
• CORNING PYREX Acid Waste Drainline“The Clear Solution”
• CENTRAL BLOWERS for Fume HoodsEpoxy coated, spark resistant
• WESTERN EMERGENCY EQUIPMENTEyewash/Safety Shower
• LAB TOPS – Epoxy Resin Sinks & TopsColors Available
• ALNOR Fume Hood Safety AlarmsAs recommended by ANSI and OSHA
• SPECIAL & HARD TO FIND ITEMS
You don’t have to wait 60 to 90 days for an epoxy sink foryour lab, or a gooseneck faucet with a vacuum breaker; or anemergency shower/eyewash. WE HAVE THEM IN STOCK!Our prices are competitive, and we can usually ship via UPSthe same day!
Toll Free 1-800-880-6745www.msilabproducts.com
Fax: (281) 367-8093Email: [email protected]
www.msilabproducts.com 1-800-880-6745
INDEX 3
INDEX
History ............................................................1
General Information ........................................2
MSI Customers ..............................................4
Chicago Faucets Laboratory Fixtures ............5
Acid Waste Systems - Glass........................31
Acid Waste Systems - Polypropylene ..........55
Epoxy Resins ................................................67
Smooth On....................................................75
Exhaust Blowers ..........................................77
Fume Hoods ................................................84
Haws Safety Equipment................................85
www.msilabproducts.com 1-800-880-6745
SATISFIED MSI CUSTOMERSA partial list of our customers
BJ ServicesBaker HughesBritish PetroleumBrown & RootChevronDow ChemicalDurathermExxon ChemicalFina
Getty OilGulf Chemical
Research & LicensingHL&PHaliburtonHouston Advanced
Research CenterHughes ToolsHuntsman
KelloggMobilOlin MathesonPennzoil Oil & GasPetrotexReichholdShell Oil & GasSyengentaTexaco
Arizona StateAuburnBaylor Univ.Bethany CollegeColorado StateCornell Univ.Univ. of AlabamaFlorida StateGeorgia TechGeorgia Univ.Kansas State Univ.LSUMarquette Univ.Miss. State Univ.Montana StateN.D. StateNavarro College
New Mexico StateOklahoma StateOle MissRice Univ.SMUSoutheastern La. Univ.TCUTexas A&MTexas StateTexas TechTulane Univ.UT Dental SchoolUniv. of ArizonaUniv. of ArkansasUniv. of Caracas,
VenezuelaUniv. of Colorado
Univ. of FloridaUniv. of HoustonUniv. of Lima, PeruUniv. of MiamiUniv. of MissouriUniv. of NebraskaUniv. of NevadaUniv. of OhioUniv. of OklahomaUniv. of PennsylvaniaUniv. of Southern Miss.Univ. of Tenn.Univ. ot Texas
(9 campuses)Univ. of UtahWake Forest
Baylor College of Med.Conway Hosp.Emory Univ.Kelsey SeyboldM.D. AndersonMacon Hosp.SW Foundation
Shreveport Teaching Hosp.
St. Luke’s Hosp.St. Joseph Hosp.Texas Womens CollegeTulane Med.UT Med. School
Univ. of Miss. Med. School
Univ. of MissouriUniv. of Missouri DentalUniv. of Texas DentalVA Hospitals
Boeing AicraftCDC CentersHARCLexicon Genetics
Los Alamos Atomic Research
NASA(3 Houston Labs)
Texas A&M Oceanography Lab
Water ReclamationUSDA
4 MSI CUSTOMERS
INDUSTRIAL
COLLEGES & UNIVERSITIES
MEDICAL
SPECIALTY
MSILaboratory Products
CCHHIICCAA GGOOFFAA UUCCEETT SS
®
Commercial • Electronic
Food Service • Laboratory
Residential • Components • Repair Parts
CHICAGO FAUCETS 5
www.msilabproducts.com 1-800-880-6745
6 CHICAGO FAUCETS
NO. 980Single
NO. 983Triple
NO. 980-E7T
NO. 957SHANK
NO. 981Double-180°
NO. 982Double-90°
NO. 984Quad
CALL FOR PRICE LIST1-800-880-6745
TURRETS
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 7
FLANGES
NO. 986
NO. 986-E7XT
NO. 987F
NO. 988LNO. 957
Shank Washer & Nut
NO. 986F
NO. 987
NO. 988
www.msilabproducts.com 1-800-880-6745
8 CHICAGO FAUCETS
COCKS
NO. 907BAir - Gas - Vacuum
NO. 937Gases
NO. 937WHWater
NO. 909Air - Gas - Vacuum
NO. 937CHWater
NO. 937STSteam
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 9
FUME HOOD VALVES & FITTINGS
NO. 962 VOGStraight
NO. 913Air - Gas - Vacuum
NO. 985-AGN2BVB
NO. 962 VOGAAngled
NO. 986-E7XT
NO. 980-GN2BE7
NO. 1322Air - Gas - Vacuum
NO. 988-GN2BVB
www.msilabproducts.com 1-800-880-6745
10 CHICAGO FAUCETS
ELECTRICAL
NO. 1310A
NO. 1312A
NO. 1311A
NO. 1313A
CALL FOR PRICE LIST1-800-880-6745
All units furnished with 3/4 shank, washer and nut
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 11
PURE WATER OR DISTILLED WATER
NO. 828PVDF Valve
1/4” Teflon Tubing
NO. 8391/2” NPS Male Inlet
NO. 870BPVC
1/2 Female Inlet
NO. 838CelconValve
1/2 NPSMale Inlet
NO. 829PVDF Valve1/4” Teflon
Tubing
NO. 869BPVC
1/2 Male Inlet
www.msilabproducts.com 1-800-880-6745
12 CHICAGO FAUCETS
PURE WATER OR DISTILLED WATER (cont’d.)
NO. 969
NO. 929Hot - Cold Water
NO. 9713/8” NPS Inlet
NO. 970Panel Mount
Silver or Tin Lined1/2” Inlet
LABORATORY WATER
NO. 930Hot - Cold Water
NO. 931Hot - Cold Water
All units are self-closing. Manual close must be specified.
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 13
LABORATORY WATER (cont’d.)
NO. 931 VB E7Hot - Cold Water
NO. 928Cold Water
NO. 942Hot - Cold Water
Wall Mount
NO. 943Hot - Cold Water
Wall Mount
NO. 938Cold Water
NO. 927Cold Water
www.msilabproducts.com 1-800-880-6745
14 CHICAGO FAUCETS
LABORATORY WATER (cont’d.)
NO. 946Hot - Cold Water
NO. 1301Multi Service
Cold Water - 2 Gases
NO. 985-BCold Water
NO. 940 VBE7
NO. 997Cold Water
3 Way Outlet
NO. 933Cold WaterWall Mount
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 15
LABORATORY WATER (cont’d.)
NO. 934Cold Water
NO. 932Cold Water
NO. 940Hot - Cold Water
NO. 941High Rise
Hot - Cold Water
NO. 935Hot - Cold Water
NO. 936Hot - Cold Water
CALL FORPRICE LIST
1-800-880-6745
16 CHICAGO FAUCETS
NO. 895-317
NO. 891 NO. 1891
NO. 895-320
NO. 50 CT NO. 51 CT NO. 349
LABORATORY WATER (cont’d.)
www.msilabproducts.com 1-800-880-6745
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 17
LABORATORY WATER (cont’d.)
NO. 350
NO. 305
NO. 12
NO. 305 VB
NO. 445
NO. 728-SS
NO. 540
NO. 445-L8
www.msilabproducts.com 1-800-880-6745
18 CHICAGO FAUCETS
LABORATORY WATER
NO. 786
NO. 897 NO. 540-LD-897S-WXF
NO. 293NO. 13
NO. 786-E3
NO. 5
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 19
GOOSENECK SPOUTS
NO. GN1BVB4” Spread
NO. GN2BVB6” Spread
NO. L5VB4-1/2” Spread
NO. GN8BVB8” Spread
NO. L6BVB6” Spread
NO. L8BVB8” Spread
www.msilabproducts.com 1-800-880-6745
20 CHICAGO FAUCETS
GOOSENECK SPOUTS (cont’d.)
NO. S4BVB4-1/2” Spread
NO. 892 3/8”NO. 893 1/2”
NO. DJ 13
NO. DJ 18
NO. DJ18 VB
NO. DJ13 VB
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 21
NO. L88”
NO. L1212”
NO. 204
NO. 317
NO. 205
NO. 318
NO. 210
NO. 319
NO. L99-1/2”
NO. L1514”
GOOSENECK SPOUTS (cont’d.)
HANDLES
www.msilabproducts.com 1-800-880-6745
22 CHICAGO FAUCETS
HANDLES (cont’d.)
NO. 320
NO. 937-2
NO. 635
INDEX BUTTONS
NO. 1000
NO. E-22 NO. 8923/8”
NO. 8931/2”
NO. 892-200KJVACUUM BREAKER REPAIR KIT
Internal Parts to Refurbish Vacuum Breaker
VACUUM BREAKERS
CALL FORPRICE LIST
1-800-880-6745
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 23
NO. E3-3Aerator
NO. E12Aerator
NO. E26Spout Outlet
NO. E1Single Screen
Outlet
NO. E12-VP
NO. E28Spray Outlet
Vandal Resistant
NO. E23/4” Hose Adapter
NO. E3Softflow Aerator
NO. E29Lam-A-Flow Outlet
NO. E15Spray
NO. E4FSpray
CALL FORPRICE LIST
1-800-880-6745
OUTLETS
www.msilabproducts.com 1-800-880-6745
24 CHICAGO FAUCETS
OUTLETS (cont’d.)
NO. E22In Line
Vacuum Breaker
NO. E27Hose
NO. E7Serrated Hose Tip
NO. E7-TAngle Serrated
Hose Tip
E-18Aspirator
SHANKS
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 25
PARTS - CARTRIDGES
NO. 1-99XTRIGHT HAND
NO. 1-100XTLEFT HAND
NO. 217XT-RT
NO. 217XT-LH
NO. 274-XT RT NO. 274-XT LH NO. 333X NO. 625X
NO. 335-X NO. 409-X NO. 377-XT-LH
www.msilabproducts.com 1-800-880-6745
26 CHICAGO FAUCETS
NO. 509 GC
NO. 87HOSE 24”, 36”, 48”,
60”, 72”
NO. 83Hose Unit 30”, 45”, 54”, 66”
NO. 84
NO. 537
PRE-RINSE VALVES & HOSES
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 27
NO. 548
NO. 733-OHVBNO. 732-VB-669
NO. 535
URINAL VALVES
CALL FORPRICE LIST
1-800-880-6745
PRE-RINSE VALVES & HOSES (cont’d.)
www.msilabproducts.com 1-800-880-6745
28 CHICAGO FAUCETS
LABORATORY WATER (cont’d.)
HOSPITAL PEDAL & KNEE VALVE
NO. 2200
NO. 625
NO. 834 EP
NO. 2200-8
NO. 625LP
www.msilabproducts.com 1-800-880-6745
CHICAGO FAUCETS 29
HOSPITAL PEDAL & KNEE VALVE (cont’d.)
NO. 745-VO NO. 645
PRE-RINSE VALVES & HOSES
NO. 919 NO. 502 NO. 923
ACID WASTE DRAIN SYSTEMS 31
MSILaboratory Products
Corning Process SystemsNorth America
ACIDWASTEDRAIN
SYSTEMS
O.I. SCHOTT
www.msilabproducts.com 1-800-880-6745
32 ACID WASTE SYSTEMS
Physical Properties
Type Glass: Borosilicate
Working Pressure*:1/2”–3/4”–1” ..............100 p.s.i.1-1/2”–2”–3” ................75 p.s.i.4” ................................50 p.s.i.6” ................................30 p.s.i.
Test Pressure*:1-1/2 Time Working Pressure
Operating Temp. (maximum):Freezing point to 450°F
Glass Therm. Expansion:32 x 10-7
Glass Therm. Conductivity:0.73 BTU/hr. ft.2/F°/ft. at 212°F
Glass Therm. Shock Diff.:1/2”–3”............................200°F4” ....................................175°F6” ....................................160°F
Chemical Properties
Durability Acids:All except Hydrofluoric orPhosphoric with Fluorides
Durability Alkalies:Some attack above 120°F
Coupling Outer Band:1 bolt Stainless Steel 1/2”–6”
Coupling Compression Liner/Seal Ring:Hydrin/TFE Seal 300°F;Viton/TFE 450°F
*NOTE: Gas pressure recommendations:it is recommended that suitable safe-guards for equipment and personnel beprovided in the unlikely event of systemfailure when glass pipe is used under agas pressure. This safeguard is recom-mended due to the potential energy ofgases under pressure or vacuum.
www.msilabproducts.com 1-800-880-6745
ACID WASTE SYSTEMS 33
Making Joints with Process Pipe Couplings
1. Dip coupling in water orwipe beaded ends withdamp cloth.
2. Snap coupling over oneend of pipe making cer-tain TFE liner is behindbead ... then stab othersection of pipe into oppo-site sides of coupling.
3. Tighten coupling bolt with6” ratchet wrench until thegap between segments isapproximately 3/16”.
www.msilabproducts.com 1-800-880-6745
34 GLASS DRAIN LINES
6500 5 FT. LENGTHS6501 10 FT. LENGTHS
Size 5 ft Lengths 10 ft LengthsArt. No. Art. No.
1-1/2 6500-1500 6501-1500 2 2000 2000 3 3000 3000 4 4000 4000 6 6000 6000
6502 5-FT. LENGTHS(For Underground Use)
EPS Covered Art. No. 6502- 1500
2000 3000 4000
6511 SWEEPS
90° 60° 45° 22-1/2°Size Art. No. Art. No. Art. No. Art. No. 1-1/2 6511-1590 6511-1560 6511-1545 6511-1522 2 2090 2060 2045 2022* 3 3090 3060* 3045 3022* 4 4090 4060* 4045 4022* 6 6090 6060* 6045 6022*
6513 BENDS
Size 90° 60° 45° 22-1/2°Art. No. Art. No. Art. No. Art. No.
1-1/2 6513-1590 6513-1560 6513-1545 6513-1522 2 2090 2060 2045 2022 3 3090 3060* 3045 3022* 4 4090 4060* 4045 4022* 6 6045
GLASS DRAIN PIPE AND FITTINGS
www.msilabproducts.com 1-800-880-6745
GLASS DRAIN LINES 35
6518QUARTER BEND REDUCERSize Art. No. 2 x 1-1/2 6518-2015 3 x 1-1/2 3015 3 x 2 3020 4 x 1-1/2 4015 * 4 x 2 4020 * 4 x 3 4030 * 6 x 1-1/2 6015 * 6 x 2 6020 * 6 x 3 6030 * 6 x 4 6040 *
6519DOUBLE BEND REDUCERSize Art. No. 11/2 6519-1500 1) 2 x 2 x 1-1/2 1)2015 * 2 2020 3 3000 * 4 4000 * 6 6000
6519PDOUBLE QUARTER BEND(Plain End Outlet)Size Art. No. 1-1/2 6519P-1500 * 1) 2 x 2 x 1-1/2 1)2015 * 2 2020 * 34 6
Size Art. No. 1-1/2 6512-1590 2 2090
1-1/2 6512P-1590 2 2090
1-1/2 6514-1590
SPECIAL PURPOSE BENDS
www.msilabproducts.com 1-800-880-6745
36 GLASS DRAIN LINES
6520 ADJUSTABLE SANITARY T(One Adjustable Inlet)
Size Art. No. 1-1/2 6520-1520
6521 SINGLE SANITARY T6522 DOUBLE SANITARY T
Size Single Double Art. No. Art. No.
1-1/2 x1-1/2 6521-1515 6522-1515 2 x 1-1/2 2015 2015 2 x 2 2020 2020 3 x 1-1/2 3015 3015 * 3 x 2 3020 3020 3 x 3 3030 3030 4 x 1-1/2 4015 4015 * 4 x 2 4020 4020 * 4 x 3 4030 4030 * 4 x 4 4040 4040 * 6 x 2 6020 * 6020 * 6 x 3 6030 * 6030 * 6 x 4 6040 * 6040 * 6 x 6 6060 * 6060 *
6523 STRAIGHT T
Size Art. No. 1-1/2 x1-1/2 6523-1515 2 x 1-1/2 2015 2 x 2 2020 3 x 1-1/2 3015 3 x 2 3020 3 x 3 3030 4 x 1-1/2 4015 * 4 x 2 4020 4 x 3 4030 * 4 x 4 4040 6 x 3 6030 * 6 x 4 6040 * 6 x 6 6060 *
www.msilabproducts.com 1-800-880-6745
GLASS DRAIN LINES 37
6524 TEST T WITH CLEANOUT
Size Art. No. 1-1/2 x 1-1/2 6524-1515 2 x 2 2020 3 x 3 3030 4 x 4 4040
6526 DRAINLINE Y SINGLE6527 DRAINLINE Y DOUBLE
Size Art. No. Art. No. 1-1/2 x 1-1/2 6526-1515 6527-1515 * 2 x 1-1/2 2015 2015 * 2 x 2 2020 2020 3 x 1-1/2 3015 3015 * 3 x 2 3020 3020 3 x 3 3030 3030 4 x 1-1/2 4015 * 4015 * 4 x 2 4020 4020 * 4 x 3 4030 4030 * 4 x 4 4040 4040 * 6 x 2 6020 * 6020 * 6 x 3 6030 * 6030 * 6 x 4 6040 * 6040 * 6 x 6 6060 * 6060 *
6528 COMBINATION Y AND 1/4 BEND SINGLE
6529 COMBINATION Y AND 1/4 BEND DOUBLE
Size Art. No. Art. No. 1-1/2 x 1-1/2 6528-1515 6529-1515 2 x 1-1/2 2015 2015 2 x 2 2020 2020 3 x 1-1/2 3015 3015 * 3 x 2 3020 3020 3 x 3 3030 3030 4 x 1-1/2 4015 4015 * 4 x 2 4020 4020 * 4 x 3 4030 4030 * 4 x 4 4040 4040 * 6 x 2 6020 * 6020 * 6 x 3 6030 * 6030 * 6 x 4 6040 * 6040 * 6 x 6 6060 * 6060 *
www.msilabproducts.com 1-800-880-6745
38 GLASS DRAIN LINES
6530 ADJUSTABLE SANITARY T(Plain End Outlet)
Size Art. No. 1-1/2 x 1-1/2 x 1-1/2 6530-1515*
6531 PARTITION CROSS(Compact)
Size Art. No. 2 x 1-1/2 6531-2015* 2 x 2 2020* 2 x 1-1/2 x 1-1/2 x 1-1/2 2151*
Partition crosses are designed to prevent cross-flow when sinks are connected back to back.
6532 SINGLE UPRIGHT Y OR H(Vent Branch)
Size Art. No. 1-1/2 x 1-1/2 6532-1515 * 2 x 1-1/2 2015 * 2 x 2 2020 * 3 x 1-1/2 3015 * 3 x 2 3020 * 3 x 3 3030 * 4 x 1-1/2 4015 * 4 x 2 4020 * 4 x 3 4030 * 4 x 4 4040 * 6 x 3 6030 * 6 x 4 6040 * 6 x 6 6060 *
6536 STRAIGHT REDUCERS OR INCREASERS6537 ECCENTRIC REDUCERS OR INCREASERS
Size Art. No. Art. No.2 x 1-1/2 6536-1515 6537-20153 x 1-1/2 3015 3015 *3 x 2 3020 3020 *4 x 1-1/2 4015 * 4015 *4 x 2 4020 4020 *4 x 3 4030 4030 *6 x 1-1/2 6015 * 6015 *6 x 2 6020 * 6020 *6 x 3 6030 6030 *6 x 4 6040 6040 *
straight
eccentric
www.msilabproducts.com 1-800-880-6745
GLASS DRAIN LINES 39
6540 VENT INCREASERS
Size Art. No.1-1/2 x 3 6540-1530 *2 x 3 2030 *3 x 4 3040 *
6541 SINGLE SANITARY T
Size Art. No.1-1/2 x 1-1/2 6541-15152 x 1-1/2 20152 x 2 20203 x 2 30203 x 3 30304 x 1-1/2 4015 *4 x 2 4020 *4 x 3 4030 *4 x 4 4040 *6 x 2 6020 *6 x 3 6030 *6 x 4 6040 *6 x 6 6060 *
6546 SINGLE DRAINLINE Y
Size Art. No.1-1/2 x 1-1/2 6546-15152 x 2 20203 x 2 30203 x 3 30304 x 1-1/2 4015 *4 x 2 4020 *4 x 3 4030 *4 x 4 4040 *6 x 2 6020 *6 x 3 6030 *6 x 4 6040 *6 x 6 6060 *
COMPACT FITTINGS
www.msilabproducts.com 1-800-880-6745
40 GLASS DRAIN LINES
6548 COMBINATION Y AND 1/8 BEND
Size Art. No. Art No.Single Double
2 x 1-1/2 6548-2015 6548-4015 *2 x 2 2020 4020 *3 x 2 3020 4030 *3 x 3 3030 4040 *4 x 1-1/2 4015 * 6020 *4 x 2 4020 * 6030 *4 x 3 4030 * 6040 *4 x 4 4040 * 6060 *6 x 2 6020 *6 x 3 6030 *6 x 4 6040 *6 x 6 6060 *
6544 CLEANOUT PLUG
Size Art. No.1-1/2 6544-15002 20003 30004 40006 6000
6550 U BEND(Vent Loop)
Size Art. No.1-1/2 6550-15002 20003 30004 4000 *
Note: U bends are often used for ventloops. No. 6705 outlets on Swivel “S”Traps are also used as vent loops.
6566 MJ PIPE ADAPTER1)
Size Art. No.1-1/2 6566-15002 20003 30004 4000Glass Adapter to High Silicon Iron “MJ” Pipe1) 6566 “MJ” Pipe Adapter consists of glassadapter and 6740 teflon spacer
www.msilabproducts.com 1-800-880-6745
GLASS DRAIN LINES 41
6616 BEADED OUTLET3” HEMISPHERICAL
Art. No. 6616-3000
6617 BEADED OUTLET6” HEMISPHERICAL
Art. No. 6617-6000
6617P PLAIN END OUTLET6” HEMISPHERICAL
Art. No. 6617P-6011
6618 BEADED OUTLET3” X 9” OVAL
Art. No. 6618-3900
6618P PLAIN END OUTLET3” X 9” OVAL
Art. No. 6618P-3911
6619 BEADED OUTLET3” X 6” OVAL
Art. No. 6619-3600
www.msilabproducts.com 1-800-880-6745
42 GLASS DRAIN LINES
6619P PLAIN END OUTLET3” X 6” OVAL
Art. No. 6619P-3611
6724 SINK STRAINER(All Cup Sinks)
Size Art. No.1-1/2 6724-15002 6724-2000
6627 3” X 6” HORIZONTAL,WALL MOUNTED CUP SINK1-1/2” PLAIN END OUTLET
Art. No. 6627-3600*
Components Art. No.6621-3600*6724-2000*
6628 3” X 6” OVAL VERTICAL1-1/2” OUTLET WALL MOUNTEDCUP SINK
Art. No. 6628-3600*
Components Art. No.6629-3600*6624-2000*
www.msilabproducts.com 1-800-880-6745
GLASS DRAIN LINES 43
COUPLINGS 6650 DRAINLINE COUPLING(Bead to Bead)
Size Art. No.1-1/2 6650-15002 20003 30004 40006 6000
No. 6650 Drainline Coupling is used for joining1-1/2”, 2”, 3”, 4” and 6” KIMAX® Glass Drainline pipe andfittings. No. 6650 KIMAX® coupling consists of:No. 6651 segmented stainless steel outer bandNo. 6652 Buna-N rubber compression liner with TFE seal ringNo. 6653 stainless steel boltNo. 6664 silver plated stainless steel hex nut
6655 ADAPTER COUPLING
Size Art. No.2 x 1-1/2 6655-20152 x 1-3/4 20172 x 1-7/8 2018
No. 6655 Adapter Assembly is used to join KIMAX® DrainlinePipe and/or fittings to plain end sink tailpieces. The assemblyconsists of:No. 6651 segmented stainless steel outer bandNo. 6657 Buna-N rubber adapterNo. 6656 TFE adapter sealNo. 6653 stainless steel bolt, 1/4 - 28 x 2-3/4No. 6664 silver plated stainless steel hex nut
6661 B/P DRAINLINE COUPLING(Bead to Plain End)
Size Art. No.1-1/2 6661-15002 20003 30004 40006 6000No. 6661 B/P Drainline Coupling is used for joining 1-1/2”,2”, 3”, 4” and 6” KIMAX® Beaded Glass Drainline to plainend (cut) glass pipe; lead, I.P.S. metal, or plastic pipe. Thisexclusively designed KIMAX® Drainline coupling consists ofthe following components:No. 6662 stainless steel band with boltNo. 6663 Buna-N rubber compression liner with TFE sealringNo. 6664 silver plated stainless steel hext nut
www.msilabproducts.com 1-800-880-6745
44 GLASS DRAIN LINES
6665 ADAPTER COUPLING
Size Art. No.1-1/2 x 1-1/4 6665-1512*1-1/2 x 1-1/2 1515
DRAINLINE TRAPS6614 PARTITION TRAP
(Consists of Trap Body Only)
Size Art. No.Inlet x Outlet2 x 1-1/2 6614-20152 x 2 2020
Available with 2” inlet only. 11/2outlet trap has 2” inletto accept No. 6655 adapter coupling. Traps are non-siphoning with partition always visible. Traps availablewith B type cleanout.
6700 SWIVEL TRAP-P STYLE
Size Art. No.Inlet x Outlet1-1/2 x 1-1/2 6700-15152 x 1-1/2 20152 x 2 2020
No. 6700 (short outlet) Swivel “P” Trap assemblyconsists of a No. 6705 inlet with a No. 6513 outletand a No. 6650 KIMAX® Coupling at the swivel joint.
6701 SWIVEL TRAP-P STYLE
Size Art. No.Inlet x Outlet1-1/2 x 1-1/2 6701-15152 x 1-1/2 20152 x 2 2020
No. 6701 (long outlet) Swivel “P” Trap assemblyconsists of a No. 6705 inlet with a No. 6512 outletand a No. 6650 KIMAX® Coupling at the swivel joint.
www.msilabproducts.com 1-800-880-6745
GLASS DRAIN LINES 45
6704 SWIVEL TRAP-P STYLE(Plain End Outlet 1))
Size Art. No.Inlet x Outlet1-1/2 x 1-1/2 6704-15152 x 1-1/2 20152 x 2 2020
No. 6704 (plain end outlet) Swivel “P” Trap assemblyconsists of a No. 6705 inlet with a No. 6512P plain endoutlet and a No. 6650 KIMAX® Coupling at the swiveljoint. 1)Plain end outlet, can be field cut.
6706 SWIVEL TRAP-S STYLE
Size Art. No.Inlet x Outlet1-1/2 x 1-1/2 6706-15152 x 1-1/2 20152 x 2 2020
No. 6706 Swivel “S” Trap consists of two No. 6705 inletsand a No. 6650 KIMAX® Coupling at the swivel joint.
6707 DRUM TRAP-P STYLE
Size Art. No.Inlet x Outlet1-1/2 x 1-1/2 6707-1515*2 x 1-1/2 2015*2 x 2 2020*
A Traps available with B type cleanout.
6708 INTERCEPTOR TRAP
Size Art. No.1-1/2 x 1-1/2 6708-1515*
Couplings1-1/4 O.D. Inlet 6665-15121-1/2 O.D. Inlet 6665-1515
A Traps available with B type cleanout.
www.msilabproducts.com 1-800-880-6745
46 GLASS DRAIN LINES
6710 SWIVEL DRUM-P STYLESize Art. No.1-1/2 x 1-1/2 6710-15152 x 1-1/2 20152 x 2 2020
No. 6710 Swivel Drum Trap “P” assembly consists ofa No. 6715 inlet with a No. 6716 outlet and a No.6650 KIMAX® Coupling at the swivel joint.
6713 TRAP-P STYLE (Vented)*Size Art. No.1-1/2 x 1-1/2 6713-1515*1) 2 x 1-1/2 1)2015*2 x 2 2020*3 x 3 3030*4 x 4 4040*6 x 6 2)6060*
1) Has expanded inlet. Use No. 6655 adapter couplingfor inlet joint. 2) No cleanouts on 6 x 6 traps – consists of two glasscomponents and one 6650–6000 KIMAX® Coupling.
6714 SWIVEL DRUM TRAP-S STYLESize Art. No.1-1/2 x 1-1/2 6714-1515*2 x 1-1/2 2015*2 x 2 2020*
No. 6714 Swivel Drum Trap assembly consists of twoNo. 6715 inlets and one No. 6650 KIMAX® Coupling atthe swivel joint. Traps available with B type cleanout.
6718 TRAP-P STYLESize Art. No.1-1/2 x 1-1/2 6718-1515*1) 2 x 1-1/2 2015*1)2 x 2 2020*3 x 3 3030*4 x 4 4040*6 x 6 2)6060*
1) Use No. 6655 adapter coupling for inlet joint. 2) No cleanouts on 6 x 6 traps – consists of two glasscomponents and one 6650–6000 KIMAX® Coupling.
www.msilabproducts.com 1-800-880-6745
GLASS DRAIN LINES 47
6770 RUNNING TRAP
Size Art. No.1-1/2 x 1-1/2 6770-15152 x 2 20203 x 3 30304 x 4 4040 *1)6 x 6 2)6060 *
Traps available with B type cleanout.
1) No cleanouts on 6 x 6 traps – consists of two glasscomponents and one 6650–6000 KIMAX® Coupling.
6771 RUNNING TRAP (Vented)
Size Art. No.1-1/2 x 1-1/2 6771-15152 x 2 20203 x 3 30304 x 4 4040 *1)6 x 6 2)6060 *
1) No cleanouts on 6 x 6 traps – consists of two glasscomponents and one 6650–6000 KIMAX® Coupling.
TYPE B STANDARD CLEANOUT
Size Art. No.1-1/2 B
www.msilabproducts.com 1-800-880-6745
50 GLASS DRAIN LINES
6720 SINK OUTLET ASSEMBLY(1-1/2 and 2” Sizes)
6720D 2” For Use with Sinks Having 3-15/32 Counterbore
Size Art. No.1-1/2 6720-15002 2000 *2 6720D-2000
6726 SINK STOPPER
Size Art. No.1-1/2 6726-1500*
No. 6726 Sink Stopper is available in 1-1/2” and 2” sizein fluorocarbon plastic.
ACCESSORIES AND HARDWARE6680 THREAD ADAPTERS
(Threaded to Beaded Pipe)
Size Art. No.1-1/2 6680-15002 20003 30004 4000
6685 ADJUSTABLE THREADADAPTER
Size Art. No.2 x 1-1/2 6685-2015
www.msilabproducts.com 1-800-880-6745
GLASS DRAIN LINES 51
6738 GASKET
Size Art. No.1-1/2 6738-1500
6735 1-1/2” SPLIT COUPLING(Threaded to Beaded Pipe)
Size Art. No.1-1/2 6735-1500
6739 GASKETSize Art. No.1-1/2 6739-1500
6728 1-1/2” TAILPIECE ASSEMBLY
Size Art. No.1-1/2 x 6-1/2 6728-10601-1/2 x 10-1/2 1100
Components of 6728, 6723-NutSize Art No.1-1/2 6723-1500
6730 TailpieceSize Art. No.1-1/2 x 6-1/2 6730-1060*1-1/2 x 10-1/2 1100
6727 SINK OVERFLOW -BEEHIVE TYPE
Size Art. No.1-1/2 4” 6727-15041-1/2 6” 15061-1/2 8” 1508
Sink Overflow is made of black fluorocarbon plastic.Beehive type can be modified to open type by cuttingoff top beehive section.
www.msilabproducts.com 1-800-880-6745
52 GLASS DRAIN LINES
7310-2000KIMAX®PORTABLEGLASS PIPECUTTER1-1/2” and 2”
PORTABLE FIELD CUTTING TOOLS
7310-56802PORTABLEGLASSPIPECUTTER
7290 PIPE HANGERS (Padded)1-1/2”, 2”, 3”, 4”, 6” Sizes
Size Art. No.1-1/2 7290-15002 20003 30004 40006 6000
Recommended for horizontal runs. Hangers containintegral cushions. Standard finish on band is A.S.T.M.type L.S. Zinc coating.
www.msilabproducts.com 1-800-880-6745
GLASS DRAIN LINES 53
6655 ADAPTER COUPLING
“A” DimensionPipe O.D. Coupling Size Art No.1.48-1.53 2 x 1-1/2 6655-20151.70-1.78 2 x 1-3/4 20171.82-1.90 2 x 1-7/8 2018
KIMAX® SPLIT COUPLING
Coupling GasketPipe Size Art No. Art No.1-1/2 6735-1500 6739-1500
6661 KIMAX® B/PCOUPLING
Pipe Size Art No.1-1/2 6661-15002 20003 30004 40006 6000
TYPICAL JOINT REFERENCE CHART
6650 KIMAX®DRAINLINECOUPLING
Size Art No.1-1/2 6650-15002 20003 30004 40006 6000
www.msilabproducts.com 1-800-880-6745
54 GLASS DRAIN LINES
GLASS ADAPTER TO HIGHSILICON IRON “MJ” PIPE
Adapter MJPipe Size Art No. Coupling1-1/2 6566-1500 Furnished2 2000 by others3 30004 4000
KIMAX® THREAD ADAPTERAND DRAINLINE COUPLING
Adapter CouplingPipe Size Art No. Art No.1-1/2 6680-1500 6650-15002 2000 20003 3000 30004 4000 4000
KIMAX® Glass-to-Bell End Pipe 1. Pack hub half full with non-asbestos rope. 2. Caulk with hot lead, lead wool or acid-proof cement.
www.msilabproducts.com 1-800-880-6745
56 POLYPROPYLENE DRAIN LINES
MECHANICAL JOINTACID WASTE SYSTEMS
IPEX Lablinle™ polypropylene acid waste systemfeatures our state-of-the-art mechanical joiningdesign using:
• A no heat Elastolive™ compression seal for fast installation andsuperior joint performance and,
• Labline’s™ patented grooved joint assembly, preventing leaksdue to misalignment and potential pullout resulting from thermalcontraction.
www.msilabproducts.com 1-800-880-6745
POLYPROPYLENE DRAIN LINES 57
VENT LOOP U BENDSize Significant No.1-1/2 W10112 W1012
P TRAPSize Significant No.1-1/2 W10212 W1022
P TRAPLong RadiusSize Significant No.1-1/2 WT112 WT123 WT134 WT14
S TRAPSize Significant No.1-1/2 W10312 W1032
RUNNING TRAPSize Significant No.1-1/2 W10412 W1042
THREADED ADAPTERMST x FSTSize Significant No.1-1/2 x 1-1/4 W1211-1/2 x 1-1/2 W131
MALE ADAPTERLJ x MPTSize Significant No.1-1/2 W141T2 W1423 W1434 W144
www.msilabproducts.com 1-800-880-6745
58 POLYPROPYLENE DRAIN LINES
FEMALE ADAPTERLJ x FPTSize Significant No.1-1/2 W1512 W152
COUPLINGSize Significant No.1-1/2 W1612 W1623 W1634 W164
1/4 BEND (90°)Size Significant No.1-1/2 W1812 W1823 W1834 W184
1/8 BEND (45°)Size Significant No.1-1/2 W1912 W1923 W1934 W194
SANITARY TEESize Significant No.1-1/2 W2012 W2023 W2034 W204
REDUCING SANITARY TEESize Significant No.2 x 1-1/2 W20213 x 1-1/2 W20313 x 2 W20324 x 1-1/2 W20414 x 2 W20424 x 3 W2043
www.msilabproducts.com 1-800-880-6745
POLYPROPYLENE DRAIN LINES 59
CLEANOUT TEE (45°)Size Significant No.1-1/2 W20152 W20253 W20354 W2045
LOOSE NUT 1/8 BEND (45°‚LJ x LNSize Significant No.1-1/2 W2112 W2123 W2134 W214
NO HEAT ELASTOLIVEYELLOWSize Significant No.1-1/2 W221NH2 W222NH3 W223NH4 W224NH
UNION NUTSize Significant No.1-1/2 W2312 W2323 W2334 W234
CLEANOUT PLUGSize Significant No.1-1/2 W2412 W2423 W2434 W244
PIPE CLIPSize Significant No.1-1/2 W2512 W252
www.msilabproducts.com 1-800-880-6745
60 POLYPROPYLENE DRAIN LINES
GROOVING TOOL &SPANNER COMBINATION SETSize Significant No.1-1/2 W261CS2 W262CS3 W263CS4 W264CS
SPANNER Size Significant No.1-1/2 W26112 W26223 W26334 W2644
GROOVING TOOLSize Significant No.1-1/2 W2612 W2623 W2634 W264
LOOSE NUT 1/4 BENDLJ x LNSize Significant No.1-1/2 W2912 W2923 W2934 W294
SINK OUTLET WITH PLUGSize Significant No.1-1/2 - 3-3/8 W301B (Black)1-1/2 - 3-3/8 W301W (White)1-1/2 - 2-7/8 W311B (Black)1-1/2 - 2-7/8 W311W (White)Lock Nut for W301B W3012B
www.msilabproducts.com 1-800-880-6745
POLYPROPYLENE DRAIN LINES 61
SINK OUTLET PLUGSize Significant No.
W3011B (Black)W3011W (White)
SINK OVERFLOWSize Significant No.1-1/2 W321B (Black)1-1/2 W321W (White)
45° WYESize Significant No.1-1/2 W3712 W3723 W3734 W374
REDUCING 45° WYESize Significant No.2 x 1-1/2 W37213 x 1-1/2 W37313 x 2 W37324 x 1-1/2 W37414 x 2 W37424 x 3 W3743
COMBINATION WYE & 1/8 BENDSize Significant No.1-1/2 W37152 W37253 W37354 W3745
www.msilabproducts.com 1-800-880-6745
62 POLYPROPYLENE DRAIN LINES
REDUCING COMBINATIONWYE & 1/8 BENDSize Significant No.2 x 1-1/2 W372513 x 1-1/2 W373513 x 2 W373524 x 1-1/2 W374514 x 2 W374524 x 3 W37453
DOUBLE WYESize Significant No.1-1/2 W3812 W3823 W3834 W384
DOUBLE WYE & 1/8 BENDSize Significant No.1-1/2 W38152 W38253 W38354 W3845
REDUCING DOUBLE WYE &1/8 BENDSize Significant No.2 x 1-1/2 W382513 x 1-1/2 W383513 x 2 W383524 x 1-1/2 W384514 x 2 W384524 x 3 W38453
REDUCING DOUBLE WYESize Significant No.2 x 1-1/2 W38213 x 1-1/2 W38313 x 2 W38324 x 1-1/2 W38414 x 2 W38424 x 3 W3843
www.msilabproducts.com 1-800-880-6745
POLYPROPYLENE DRAIN LINES 63
LOOSE NUT - REDUCING BUSHINGLN x LJSize Significant No.2 x 1-1/2 W3921*3 x 1-1/2 W3931*3 x 2 W3932*4 x 1-1/2 W3941*4 x 2 W3942*4 x 3 W3943**Loose Nut not furnished
CUP SINK - ROUNDSize Significant No.6 x 4 Deep W401B4 x 4 Deep W402Plug for W401B W4011B
CUP SINK - OVALSize Significant No.6 x 3 W4979 x 3 W498Nut for W497 W4971
GLASS ADAPTERLJ x BEADSize Significant No.1-1/2 W4512 W4523 W4534 W454
GLASS ADAPTERLJ x BEADSize Significant No.1-1/2 W4512 W4523 W4534 W454
www.msilabproducts.com 1-800-880-6745
64 POLYPROPYLENE DRAIN LINES
UNIVERSAL TRAPFST x LJSize Significant No.1-1/2 W5011-1/2 W511*PP Base Only W5112Clear Base Only W5113O-Ring Gasket Only W5114Top Assembly forW501 & W511 W5116*Transparent Base
UNIVERSAL TRAP-S TYPEFST x LJSize Significant No.1-1/2 W5015*1-1/2 W5115**Transparent Base
DILUTION TRAPSize Significant No.1-1/2 W601*1-1/2 W611**Transparent Base
www.msilabproducts.com 1-800-880-6745
POLYPROPYLENE DRAIN LINES 65
HDPE & POLYPROPYLENENEUTRALIZATION TANKS
MONITORING RECORDING &ALARM SYSTEMS
IPEX offers a complete rangeof Neutratank® neutralizationtanks as well as dilution,sampling and pH tanks formanaging concentrationsand pH levels in acid wastesystems.
IPEX Neutrasystem2™, NEMA 4x rated,pH monitoring system
EPOXY RESINS 67
MSILaboratory Products
EPOXY RESIN PRODUCTSThe Best Choice for Today’s
Harsh Laboratory Environments
www.msilabproducts.com 1-800-880-6745
68 EPOXY RESINS
BLACK RESIN SINKSStandard - Under Counter Mounted
Item Length Width Depth Drain WeightEP-5 14” 10” 6” END 23
EP-5C 14” 10” 6” CTR 23
EP-9 6-5/8” 4-5/8” 5-3/8” CTR 10
EP-10 16” 8” 7” END 25
EP-11 11-1/4” 6-1/2” 6” CTR 15
EP-12 12” 6” 6” END 19
EP-13 12” 8” 6” CTR 18
EP-15 16” 12” 8” END 32
EP-15C 16” 12” 8” CTR 32
EP-19 16-1/2” 14-1/2” 9-1/4” CTR 45
EP-20 16” 16” 7-1/2” COR 38
EP-22 18” 6-1/2” 6” CTR 25
EP-24 18” 14” 10-1/2” CTR 45
EP-25 18” 15” 8” COR 41
EP-30 18” 15” 11” COR 57
EP-32 19-1/2” 16-1/2” 8” CTR 49
EP-33E 21” 17” 10” END 45
EP-35 21” 18” 10” END 62
EP-40 21-1/2” 15-1/2” 7” CTR 45
EP-45 21-1/2” 15-1/2” 11” COR 60
EP-46 22-1/4” 13-7/8” 12-5/8” FRCTR 75
www.msilabproducts.com 1-800-880-6745
EPOXY RESINS 69
Item Length Width Depth Drain Weight
EP-50 24” 16” 8” END 60
EP-50C 24” 16” 8” CTR 60
EP-51 24” 16” 12” CTR 69
EP-51A 24” 16” 18” CTR 95
EP-51B 24” 16” 12” END 69
EP-52 24” 18” 10-3/4” END 71
EP-53 24-1/2” 18-7/16” 16-3/4” END 100
EP-54 24” 24” 10-1/2” CTR 92
EP-55 25” 15” 10” COR 67
EP-58 29-3/4” 14-3/4” 6” CTR 70
EP-59 28” 15” 12” END 85
EP-60 28” 20” 8-3/4” SIDE 75
EP-61 28” 18” 10” COR 82
EP-62 25-1/2” 18” 10” COR 92
EP-63 31” 17” 10” END 79
EP-64 31” 21” 10” CTR 95
EP-65 35-1/2” 19-9/16” 10” CTR 96
EP-69 37-1/2” 20-1/2” 15-3/8” COR 135
EP-70 24” 16” 15-1/2” CTR 88
EP-71 36” 20” 17” CTR 143
EP-72 24-3/4” 16-3/4” 15-3/8” END 120
34L134 EARL WALLS (INCLUDES SCREEN) 10
Sinks also available inWhite, Super White, Gray, Blue, Pearl White, Sand,
Sand Stone, Dark Khaki, Brown, Green, Blush, Beige
www.msilabproducts.com 1-800-880-6745
70 EPOXY RESINS
Item Length Width Depth Drain Weight
EPL-5 14” 10” 6” END 23
EPL-5C 14” 10” 6” CTR 23
ADAL-5 14” 10” 4-7/8” COR 19
EPL-10 16” 8” 7” END 25
EPL-13 12” 8” 6” CTR 18
EPL-15 16” 12” 8” END 32
EPL-15C 16” 12” 8” CTR 32
EPL-20 16” 16” 7-1/2” COR 38
EPL-22 18” 6-1/2” 6” CTR 25
EPL-25 18” 15” 8” COR 41
EPL-30 18” 15” 11” COR 57
EPL-33E 21” 17” 10” END 45
EPL-50C 24” 16” 8” CTR 60
EPL-53 24-1/2” 18-7/16” 16-3/4” END 100
EPL-55 25” 15” 10” COR 67
EPL-59 28” 15” 12” END 85
ADAL-25 18” 15” 5” COR 20
EPL-45 20-1/2” 15-1/2” 11” COR 61
EPL-58 29-3/4” 14-3/8” 6” CTR 70
LIPPED DROP-IN SINKS
Sinks also available in: White, Super White, Gray, Blue, Pearl White,Sand, Sand Stone, Dark Khaki, Brown, Green, Blush, Beige
www.msilabproducts.com 1-800-880-6745
72 EPOXY RESINS
CUPSINK, OUTLETS & OVERFLOW
RESINAvailable in All 9 Colors
Item No. Description
EP-CS4 3” x 6” Cupsink
EP-CS12 3” x 9” Cupsink
EP-S03 Outlet
EP-OF 1”-8” Overflow
EP-OF 9”-12” Overflow
PLASTICAvailable in Black, Super White and Gray Only
Item No. Description
P-CS4R 3” x 6” Cupsink
P-CS12 3” x 9” Cupsink
P-S03 Outlet
P-OF 6” 6”, 8” & 10” Overflow
P-OF 4” 4”, 6” & 8” Overflow
Plastic Stopper
P-S5 12” Round Poly Sink
www.msilabproducts.com 1-800-880-6745
EPOXY RESINS 73
SINKS AND TOPS
ACCESSORIES
Oval Cupsink
Double Sink
Single Sink
All Tops
Top w/Backsplash
Beehive &Open-End Overflow
Sink Outlet 1-1/2” TeflonBead Adapter
Top w/Integral Sink Unit& Backsplash
Top w/IntegralSink Unit
SMOOTH ON 75
MSILaboratory Products
SMOOTH ON
PC-3™ epoxy cement is the industry standardfor the installation of laboratory tops.
PC-3 is a two-part black adhesive that isheavily filled and designed to join, bond and
caulk sections of lab tops and counters.
www.msilabproducts.com 1-800-880-6745
78 CENTRAL BLOWERS
EXHAUST BLOWERS
NOTE: A wide range of blowersizes are available, dependingupon your particular application.Various corrosion-resistantcoatings as well as spark-resistant construction are alsoavailable.
Please call for additionalinformation.
PERCHLORIC ACID FUMEEXHAUST SYSTEMS
If it is desired to have a spray washdown system in theexhaust duct for Perchloric Acid fume hoods, we can supplythe entiresystem to meet your individual requirements as illustrated (orany part of the system) as follows:
1. Type 316 stainless steel flanged ducting with elbowfabricate to the lengths specified.
2. Exhaust fan with HALAR coating on housing and impellerwheel, flanged inlet and outlet connections, non-sparkingconstruction, explosion-proof motor, weather cover, spraywashdown nozzle and drain connection.
3. Type 316 stainless steel full-jet spray nozzles withstainless piping to the centerline of the duct, with exteriorduct couplings.
www.msilabproducts.com 1-800-880-6745
CENTRAL BLOWERS 83
BI - Belt Drive FC - Direct Drive
BI - Direct DriveFCD - Double Inlet
Double Width
www.msilabproducts.com 1-800-880-6745
84 CHEMICAL HOODS
FUME HOODS
Fume Hoods come in an infinite variety of sizes,styles, colors, and applications. Oftentimes,requirements call for custom fabricating and fitting.
We have a variety of sources for these specialitems.
Let us help you with design, delivery, andinstallation.
www.msilabproducts.com 1-800-880-6745
86 SAFETY EQUIPMENT
EMERGENCY EQUIPMENT
NO. 7000B
NO. 7260
NO. 7000BTWC
NO. 7260BT
NO. 7301 DM
www.msilabproducts.com 1-800-880-6745
90 SAFETY EQUIPMENT
NO. 8905
NO. SP220
NO. 8908
NO. SP220W
NO. SP225NO. SP222
www.msilabproducts.com 1-800-880-6745
SAFETY EQUIPMENT 91
NO. SP227 NO. SP229
NO. SP230 NO. SP232
NO. SP233NO. SP235
www.msilabproducts.com 1-800-880-6745
92 SAFETY EQUIPMENT
NO. 236
NO. 248
NO. 245
NO. 256
CALL FOR PRICE LIST1-800-880-6745