MSP430 Tools OverviewMSP430 Tools Overview

Игнатов СергейКОМПЭЛ

Complete development kit for $4.30• MSP-EXP430G2 LaunchPad provides all of

the HW and SW needed to get started!• Supports MSP430G2xx Value Line MCUs• Features:

• On-board emulation• 20-pin DIP socket• On-board LEDs & switches• Includes 2 MCUs

• MSP430G2553• MSP430G2452

LaunchPad & BoosterPack Ecosystem Experimenter’s Boards

Growing Ecosystem of BoosterPacks• Many plugin modules are available, with more coming soon!• Featuring Capacitive Touch, Wireless & other technologies!

Blast off @ti.com/launchpad

Highly integrated development kits for evaluating M SP430 devicesExperimenter’s Bpards featire selected MSp430 devices and additional hardware components for easy system evaluation and prototyping!

Perfect for learning a new architecture or testing the capabilities of a device family.

FRAM Experimenter’s Board- Based on MSP430FR5739- Featuring unique FRAM memory- On-board emulation- On-board sensors

F5529 USB Experimenter’s Board- Based on MSP430F5529- Complete USB development kit- On-board emulation- SD card reader, captouch & more!- $149

See them all @ ti.com/msp430tools

CC430 Experimenter’s Board- Based on CC430 MCU+RF SoC

- Includes a Base Board & Daughter Board

- On-board emulation- Complete RF development kit

- $149

2012

eZ430 Starter Kits Target Boards & Emulation Tools

• Featuring Capacitive Touch, Wireless & other technologies!

Features onboard emulation and unique form factors.• Embedded Emulation means smaller form factors,

allowing the kit to be the same size as a USB stick, and only require 2 pins for programming/debugging.

eZ430-Chronos- Based on CC430- Sub-1GHz RF- Integrated sensors- Reprogrammable- $49

eZ430-F2013- Based on MSP430F2013- Detachable target board- On-board switch & LED

- $20

eZ430-RF2500- Based on MSP430F2274- Plus CC2500 2.4GHz RF

- On-board switch & LED- $49

See them all @ ti.com/ez430

- On-board sensors- $49 ti.com/msp430tools

One tool to rule them all. MSP430 Flash Emulation T oolThe MSP-FET430UIF can program & debug all MSP430 devices when paired with the appropriate target board. Target boards are available for all MSP430 devices, and feature a ZIF target socket for interfacing with various pinouts and package types.

Production programmers, such as the MSP-GANG are also available. These kits enable quicker time to market and can program 8 targets at once!

MSP-FET430UIF MSP-TS430xyz

MSP-FET430Uxyz

LaunchPad and the BoosterPack Ecosystem

3

Blast-off with MSP430.

Meet the LaunchPad (MSP-EXP430G2)Everything you need to Launch your applications!

Embedded emulation Includes mini USB Cable for programming & debugging+

14 and 20-pin DIP SocketSupports all MSP430 Value Line devices+

Includes 2x MSP430 DevicesMSP430G2553 & MSP430G2452+

2 Pushbuttons & 2 LEDs+

Growing BoosterPack ecosystem+

FREE software Compiler/DebuggerCode Composer Studio Ver 5, IAR Embedded Workbench & GCC

+

$4.30 & FREE SHIPPING! Blast off @ti.com/launchpad

Growing BoosterPack EcosystemMany available plugin modules for the MSP430 LaunchPad

BoosterPacks = Plugin modules for LaunchPad that feature unique TI products or enable entire applications.

BoosterPacks are available from TI, 3rd parties & online communities!!

Many BoosterPacks available:• Capacitive Touch (430BOOST-SENSE1)• Sub-1GHz RF (430BOOST-CC110L)• C5000-based captouch + audio (430BOOST-AUDIO1)• I2C Digital Potentiometer (TPL401EVM)• I2C Digital Potentiometer (TPL401EVM)• SPI Digital Potentiometer (TPL501EVM)• 8x8 LED Matrix (Olimex)

BoosterPack standard now adopted by C2000 & Stellaris!

More BoosterPacks coming soon featuring NFC, unique LCD displays & more

See all of the BoosterPacks@ www.ti.com/boosterpacks!

MSP430 Experimenter’s Boards

6

In-depth Evaluation with MSP430.

MSP-EXP430F5529Complete USB development kit based on the MSP430F5529 MCU

Based on the MSP430F5529 MCUs• 128kB Flash / 8kB RAM• Full-speed USB 2.0• 25MHz, 16-bit RISC CPU• Timers, Serial Communication, 120bit ADC,

Comparator, GPIO

On-board Features:• Complete USB Development Platform• On-board emulation for programming/debugging• SD card reader• SD card reader• 102x64 dot-matrix backlit LCD• 5-pad capacitive touch buttons/slider• Headers for many TI wireless modules• General purpose LEDs & switches• Scrollwheel/potentiometer• Multiple power options: USB, JTAG, batteries or

external power supply

Easy-to-Use USB SW Developer’s Package is available• Software solutions for enabling HID, MSC & CDC USB

implementations• Easy & simple VID process is also available Learn more about this kit

@ www.ti.com/usbexp

Com

plet

e U

SB

Dev

elop

men

t kit

MSP-EXP430FG4618/F2013Complete development kit based on the MSP430FG4618 & MSP430F2013 MCUs

Based on the MSP430FG4618 & MSP430F2013 MCUsIntegrated peripherals include:• 12-bit DACs, 12-bit ADC, 16-bit Sigma Delta, Comparators,

OpAmps, DMA, Multiplier, LCD controller, Serial Communication, GPIO

On-board Features:• 2 on-board MSP430 devices give access to most MSP430

peripherals!• 2 JTAG ports enable easy programming of each MSP device

• Requires separate MSP-FET430UIF • Requires separate MSP-FET430UIF • Segmented LCD display• Headers for many TI wireless modules• Microphone to ADC• DAC to buzzer• Capacitive touch pad• General purpose LEDs & switches• RS-232 connector

Learn more about this kit @ www.ti.com/fg4618exp

MSP-EXP430F5438Complete development kit based on the MSP430F5438 MCU

Based on the MSP430F5438 MCU• 256kB Flash / 16kB RAM• 25MHz 16-bit RISC CPU• Unique Power Mgmt Module, Timers, 12-bit ADC, Serial

Communication, Multiplier, DMA, RTC, GPIOs

On-board Features:• 100-pin ZIF socket for MSP430F5438• Power sources include USB, JTAG, batteries & external

supply• JTAG port for easy programming & debugging• JTAG port for easy programming & debugging

• Requires separate MSP-FET430UIF • 138x110 dot-matrix LCD display• 3-axis accelerometer• 3.5mm headphone jack• Headers for many TI wireless modules• Microphone to ADC• DAC to buzzer• 5-position Joystick• General purpose LEDs & switches

Learn more about this kit @ www.ti.com/fg4618exp

MSP-EXP430FR5739Complete development kit based on the MSP430FR5739 MCU with embedded FRAM

Based on the MSP430FR5739 MCU• First Ultra-Low Power MCU with embedded FRAM• 16kB FRAM• 8MHz 16-bit RISC CPU • Timers, Serial Communication, 12-bit ADCs, Comparator,

GPIO

On-board Features:• On-board MSP430FR5739 MCU• On-board Emulation for programming & debugging• Port pins fanned out for easy access

embe

dded

FR

AM

• Port pins fanned out for easy access• Temperature sensor• 3-axis accelerometer• Headers for many TI wireless modules• General purpose LEDs & switches

See the unique features of FRAM out-of-the-box!• Next generation non-volatile memory technology• Virtually unlimited write endurance (1015 accesses)• 250x lower energy than Flash during writes• 100x faster writes than Flash• Learn more at www.ti.com/fram

Learn more about this kit @ www.ti.com/fram

Firs

t ULP

MC

U w

ith e

mbe

dded

FR

AM

MSP-EXP430F6137RFxComplete Wireless development kit based on the CC430 MCU with embedded sub-1GHz RF transceiver

Base-board based on the CC430F6137 MCU• On-board CC430F6137 MCU with embedded RF transceiver

• 433, 868 & 915MHz available• 32kB Flash / 4kB RAM• 96-segment LCD driver• Timers, serial communication, 12-bit ADC, GPIO, DMA,

Multiplier, Comparators, Power Mgmt Module • On-board segmented LCD• On-board emulation for programming & debugging• General purpose switches & LEDs• Various power sources: Batteries, USB, external supply• Various power sources: Batteries, USB, external supply

Daughter-board based on CC430F5137• On-board CC430F5137 MCU with embedded RF transceiver

• 433, 868 & 915MHz available• 32kB Flash / 4kB RAM• Timers, serial communication, 12-bit ADC, GPIO, DMA,

Multiplier, Comparators, Power Mgmt Module • Can leverage emulation on Baseboard for programming &

debugging• General purpose switch & LED• Light sensor

See the unique features of CC430 out-of-the-box!• Learn more at www.ti.com/cc430

Learn more @ www.ti.com/cc430

MSP-EXP430F6659Complete development kit based on the MSP430F5659 MCU – first MSP430 with 512kB Flash

Based on the MSP430F5659 MCU• 512kB Flash / 32kB RAM• Full-speed USB 2.0• 25MHz, 16-bit RISC CPU• Timers, Serial Communication, 120bit ADC, Comparator, GPIO

On-board Features:• Complete USB Development Platform• On-board emulation for programming/debugging• SD card reader• 400x240 ULP Sharp display• 400x240 ULP Sharp display• BoosterPack pinout/headers to support various modules• Headers for many TI wireless modules• General purpose LEDs & switches• Scrollwheel/potentiometer• Multiple power options: USB, JTAG, batteries or external power

supply• LiPo battery charging circuitry• Microphone and 3.5mm headphone jack

Demonstrate new MSP430 Software!• Out-of-box experience will leverage SYS/BIOS RTOS• Demonstrate the upcoming MSP430 Graphics Library *Coming 4Q 2012

MSP-EXP430FR5969Complete FRAM development kit based on the MSP430FR5869 – The first MCU based on Wolverine platform

Based on the MSP430FR5869 MCU• 64kB FRAM• 16MHz, 16-bit RISC CPU• Multiplier, DMA, Timers, CRC, ADCs, Comparators, Serial

communication, GPIOs

On-board Features:• Next-gen on-board emulation for programming/debugging• BoosterPack pinout/headers to support various modules

• Will come with a 96x96 Sharp ULP Display BoosterPack• General purpose switches• General purpose switches• Multiple power options: USB, batteries, external power supply

or super cap• Recharge-able supercap for ultra-low-power operation

Demonstrate the new Wolverine Platform!• See the ultra-low power, fast write speeds & virtually unlimited

write endurance of embedded FRAM• 100uA/MHz // 0.7uA LPM3 // 0.5uA LPM3.5 (RTC)

• Operate for 24+ hours off of the supercap• New eZFET (on-board emulation) will enable new energy-

conscious debug capabilities. Offers energy trace and current measurement during debug *Coming 1Q 2013

eZ430 Starter Kits

14

Development with Unique form -factors

eZ430 Starter KitsComplete development kits offering on-board emulation and small, unique form-factors.

See all eZ430 kits @www.ti.com/ez430Including:• Zigbee CC2530ZDK-ZNP-MINI• Bluetooth eZ430-RF256x• SubGHz RF MSP430-3P-AWGH-

AMB8423-DEVBD

• More…

eZ430 Emulator• All eZ430 starter kits include an eZ430 emulator• Provides a 2-wire JTAG protocol called Spy-bi-wire• Enables developers to program & debug the target MCU • Also allows users to transmit serial data to/from the PC over UART

eZ430-ChronosSub-1GHz RF development kit in watch formfactor• Integrated sensors: pressure,

temperature & 3-axis acc.• Enabled by CC430F6137 MCU + RF

transceiver (433/868/915MHz)• Includes RF & eZ430 emu dongle.• Affordable development @ $49

eZ430-RF2500Wireless sensor network within minutes!• Enabled by MSP430F2274 and CC2500

(2.4GHz RF)• Utilizes TI’s SimpliciTI stack• Comes with 2 detachable target boards• Also includes eZ430 emu dongle & battery

pack.• Affordable development @ $49• Extra target boards+battery packs available

for $20 (eZ430-RF2500T)Energy Harvesting:• eZ430-RF2500-SEH: Replaces battery pack with

Solar panel + Cymbet thin-film batteries. $149

eZ430-F2013MSP430 development in a small, easy-to-use USB form factor.• Enabled by MSP430F2013 MCU• Comes with a detachable target board with

LED, switch and access to GPIO.• Also includes eZ430 emu dongle• Affordable development @ $20• Extra target boards available for $10

(eZ430-T2012)

eZ430-TMS37157 RFID evaluation kit• Enabled by MSP430F2274 MCU and

TMS37157 PaLFI• Comes with a detachable target board that

can be plugged into the included battery board for active operation

• Also includes eZ430 emu dongle & RFID Base station reader/writer

• Affordable development @ $199

Flash Emulation Tools & Target Socket Boards

16

Full-on Development for prototyping, evaluation & production

Flash Emulation Tool (MSP-FET430UIF)One tool to rule them all.

MSP-FET430UIF - Flash Emulation Tool (FET) enables developers to program and debug ANY Flash or FRAM-based MSP430 device when paired with the appropriate target socket board.

This kit includes a USB debugging interface that can program the MSP430 device in-system through either a full JTAG interface or the pin-saving Spy Bi-Wire (2-wire JTAG) protocol.

Features:• Software configurable supply voltage between 1.8 and

3.6V @ 100mA• Supports JTAG Security Fuse blow to protect code• Supports all MSP430 development kits that have JTAG

header• Supports both JTAG and Spy Bi-Wire debug protocols

Order now@ www.ti.com/MSP-FET430UIF

Target Socket Boards (MSP-TS430XYZ)Available for various pinouts and package types to support all MSP430 devices.

• Each target board offers support for a specific MSP430 package type & pinout• Standalone kits (MSP-TS430XYZ) = $75• Require MSP-FET430UIF to connect target board to PC. Target Board + FET

bundles are available (MSP-FET430XYZ) = $149

Gang Production Programmer(MSP-GANG)Program up to 8 targets at once.

MSP-GANG - This tool can program up to eight identical MSP430 flash or FRAM devices at the same time. The MSP Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options.

An expansion board, called the Gang Splitter is included to interface the Gang Programmer with multiple target boards. Eight cables are provided that connect the expansion board to eight target devices (via JTAG or Spy-Bi-Wire connectors). target devices (via JTAG or Spy-Bi-Wire connectors).

Features:• 3x Faster than previous GANG programmer, MSP-GANG430• Programs up to 8 MSP430 devices at once• USB and RS-232 interface to PC• Interfaces with all MSP430 target socket boards and supports

all MSP430 devices• Supports both JTAG and Spy Bi-Wire debug protocols• Includes SD card slot for storing images• LCD screen for easy programming without PC• Intuitive GUI is available on PC for maximum flexibility Order now

@ www.ti.com/MSP-GANG

Спасибо за внимание!

По любым техническим вопросам по продукции Texas Instruments

Вопросы?

20

ti@compel.ru

По любым техническим вопросам по продукции Texas Instruments