DIM. A

DIM. D

DIM. F

DIM. C

DIM. B

DIM. E

DIM. G

NUMBER AND TYPE OF IMPELLERSDEPENDENT ON APPLICATION

NUMBER AND TYPE OF IMPELLERSDEPENDENT ON APPLICATION

DIMENSION A (REF) = PEDESTAL FLANGE MOUNTING SURFACE TO TOP OF STANDARD MOTOR*•DIMENSION B = CENTER OF HIGH SPEED INPUT BORE TO CENTER OF LOW SPEED OUTPUT BORE•DIMENSION C = NOMINAL SHAFT DIAMETER•DIMENSION D = MOUNTING FLANGE DIAMETER, SEE FLANGE DIMENSION SUPPLEMENT FOR •AVAILABLE FLANGE SIZES AND FLANGE DIMENSIONSDIMENSION E = MOUNTING FLANGE BOLT CIRCLE DIAMETER, SEE FLANGE DIMENSION •SUPPLEMENT FOR AVAILABLE FLANGE SIZES AND FLANGE DIMENSIONSDIMENSION F = FLANGE LOCATOR DIAMETER, SEE FLANGE DIMENSION SUPPLEMENT FOR •AVAILABLE FLANGE SIZES AND FLANGE DIMENSIONSDIMENSION G = OVERALL WIDTH OF AGITATOR ASSEMBLY, THIS DIMENSION IS DEPENDANT ON •MOTOR AND SEAL SELECTION. SEE APPROVAL DRAWING FOR FINAL MEASUREMENT.

SEE QUOTE FOR MOTOR HORSEPOWER•

* DIMENSIONS SUBJECT TO CHANGE. FINAL OVER ALL HEIGHT DEPENDANT ON FINAL MOTOR AND SEAL SELECTION. REFER TO THE APPROVAL DRAWING FOR FINAL DIMENSIONS.

MTD HIGH PRESSURE STUFFING BOX MIXER SERIES SPECIFICATIONS BY SIZEMIXER MODEL DIM. A* DIM. B DIM. C DIM. D DIM. E DIM. F DIM. G

MTD-1 31.3" 4.7" 1.250" SEE BELOW SEE BELOW SEE BELOW SEE BELOWMTD-2 31.9" 5.35" 1.375" SEE BELOW SEE BELOW SEE BELOW SEE BELOWMTD-3 39.4" 6.2" 1.625" SEE BELOW SEE BELOW SEE BELOW SEE BELOWMTD-4 39.9" 7.2" 2.000" SEE BELOW SEE BELOW SEE BELOW SEE BELOWMTD-5 46.5" 8.2" 2.375" SEE BELOW SEE BELOW SEE BELOW SEE BELOWMTD-6 47.8" 9.7" 2.750" SEE BELOW SEE BELOW SEE BELOW SEE BELOWMTD-7 63.7" 12.5" 3.500" SEE BELOW SEE BELOW SEE BELOW SEE BELOWMTD-8 67.9" 15.7" 4.250" SEE BELOW SEE BELOW SEE BELOW SEE BELOWMTD-9 70.0" 19.9" 5.000" SEE BELOW SEE BELOW SEE BELOW SEE BELOW

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

SIZE

BDWG. NO. REV

SHEET 1 OF 3WEIGHT: SCALE: 1:12

MTD-HPSB-SALES -

MTD HPSB MIXER SERIES SPECIFICATIONS BY SIZE

TITLE:

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFCLEVELAND MIXERS. ANY REPRODUCTIONIN PART, OR AS A WHOLE, WITHOUT THEWRITTEN PERMISSION OF CLEVELANDMIXERS IS PROHIBITED.

AXF-4

RAD-4

XTF-3R AXF-3HE

A WIDE VARIETY OF IMPELLER TYPES ARE AVAILABLE TO SUIT THE CUSTOMER'S SPECIFIC PROCESS. CUSTOM ORDERS

AVAILABLE UPON REQUEST.

RAD-6

RAD-2

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFCLEVELAND MIXERS. ANY REPRODUCTIONIN PART, OR AS A WHOLE, WITHOUT THEWRITTEN PERMISSION OF CLEVELANDMIXERS IS PROHIBITED.

PROPRIETARY AND CONFIDENTIALSIZE

BDWG. NO. REV

SHEET 2 OF 3WEIGHT: SCALE: 1:12

-

TITLE:

MTD HPSB MIXER SERIES SPECIFICATIONS BY SIZE

MTD-HPSB-SALES

MTD MIXER SERIES HIGH PRESSURE STUFFING BOX (HPSB) SEAL PEDESTAL STANDARDS

CASE SIZE STANDARD 150# FLANGE SIZE

OVERALL HEIGHT (INCHES)

OVERALL FLANGE DIAMETER

APPROXIMATE SEAL/COUPLING

CLEARANCE HEIGHT (ANGLE IRON HEIGHT)

FASTENER QUANTITY (EQUALLY SPACED)

TANK FLANGE MOUNT BOLT CIRCLE DIAMETER

1 6" 9 11.00" 7.5" 8 9.500"1 8" 9 13.50" 7.5" 8 11.750"2 6" 9 11.00" 7.5" 8 9.500"2 8" 9 13.50" 7.5" 8 11.750"3 6" 9 11.00" 7.5 8 9.500"3 8" 9 13.50" 7.5" 8 11.750"4 6" 9 11.00" 7.5" 8 9.500"4 8" 9 13.50" 7.5" 8 11.750"4 10" 9 16.00" 7.5" 12 14.250"5 6" 9 11.00" 7.5" 8 9.500"5 8" 9 13.50" 7.5" 8 11.750"5 10" 9 16.00" 7.5" 12 14.250"6 8" 9 13.50" 7.5" 8 11.750"6 10" 9 16.00" 7.5" 12 14.250"6 12" 9 19.00" 7.5" 12 17.000"7 8" 9 13.50" 7.5" 8 11.750"7 10" 9 16.00" 7.5" 12 14.250"7 12" 9 19.00" 7.5" 12 17.000"8 10" 9 16.00" 7.5" 12 14.250"8 12" 9 19.00" 7.5" 12 17.000"9 10" 9 16.00" 7.5" 12 14.250"9 12" 9 19.00" 7.5" 12 17.000"

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFCLEVELAND MIXERS. ANY REPRODUCTIONIN PART, OR AS A WHOLE, WITHOUT THEWRITTEN PERMISSION OF CLEVELANDMIXERS IS PROHIBITED.

PROPRIETARY AND CONFIDENTIAL

SIZE

BDWG. NO. REV

SHEET 3 OF 3WEIGHT: SCALE: 1:12

-

TITLE:

MTD HPSB MIXER SERIES SPECIFICATIONS BY SIZE

MTD-HPSB-SALES